I am having a little trouble with a spreadsheet I am creating, the formulas and cell formatting I should be using to enable this to work.
Here goes:
in cell E3 I have a time started (e.g 12:45 pm), In F3 i have time finished (e.g 2:30 pm)
So, what i'm wanting is the time taken in G3 and also, i have the amount of units that is entered manually in H3. I would like I3 to show the time taken per unit.
I am trying to calculate the average Talk Time into Minutes and Seconds. Every time I have tried, I get the wrong average.
For example, if I have a total of 53 calls and the total talk time is 4:19:05, what would the average talk per call be? I tried doing everything in seconds (this would give me a total of 15545 seconds) but the total I was getting is 4:89.
What would the formula be to get the correct average time?
how to calculate average talk time in excel.
View 9 Replies View RelatedIn our sql server table, we have a field of type DATETIME. This field is populated by a vendor product with the elapsed time of an event.
We created a SQL Server view of this column and other columns of info joined together from several tables.
Then we create in Excel 2010 a new spreadsheet with a data connection to the SQL Server, instance, and view that we created.
Excel 2010 displays each of the columns in our view.
The elapsed time column appears as "dd hh:mm:ss". However, when we click on a cell to look at its formatting, Excel lists it as general.
We want to calculate the average time in this column.
We go down below the data, click on a cell, and insert =Average(C2:C17215) and we get an error saying dividing by zero.
We have 17,000+ rows of data, so there is no divide by zero math going on here. Each row in this column has data, so there are no blank cells.
We have spent some time web searching. We then tried various methods of calculating this. Nothing has worked. In most cases, we get the divide by zero. We tried some solutions that mention using an array forumula, but that just changed the error to an invalid value error.
I'm battling to come up with the formula to calculate time and a half and double time. My boss wants me to show the overtime worked AFTER 40 hours has been worked. I have attached a copy of my spreadsheet.
View 4 Replies View RelatedI know the title is a bit vague, but I cant think how else to word it!
I have a sheet (attached) which works out hours worked, and if the amount is under a specified target, it counts how much time is owed. The problem occurs when someone works more hours than the specified target.
I guess I need an IF formula of some kind, to say if the figure is over the target, to put zero in the hours owed column.
Refer to the attachment. I am trying to average the data in the Y column, if the times fall into the range between column R and S. I am having trouble with the averageif function. Is there a better way to parse through column W, check if the values fall between the ranges of S and R, and if they do, average the associated values in column Y?
Attached image: Capture.JPG
...A..........B
11/31........2
12/31........4
1/31..........6
2/28..........8
how do i use current date and search the above list to see how many hours a employee has to current date?
Essentially I have column A that has a result that is a sum of time, I'm looking to assign a value based upon # of minutes in violation.
So basically I want less than 0:15:00 to equal 1
0:15:00 to 0:59:59 to equal 2
1:00:00 to 2:59:59 to equal 3
and greater than 3:00:00 to equal 4.
My data looks like this:
0:00:24
0:00:56
0:45:33
0:18:36
0:36:43
0:25:15
0:17:14
0:29:21
0:49:34
0:05:28
0:04:19
0:09:08
0:29:06
0:05:39
0:02:53
1:16:18
0:14:06
0:08:01
1:01:46
field A1 & B1 are variable user input. The goal is to subtract B1 from A1, take the result and divide it by 176 (a fixed number) and display the result as minutes:sec.
For example:
A1 B1
14,000 (minus) 2,200 (= 11,800 /176 =) 67
I want to result (67) to display in field C1 as 01:07 (min:sec)
I tried (A1-B1)/176 and formatted C1 to be min:sec but the result displays as 5:27 I have no idea what that number represents.
So say you have a loop running a large number (on the order of 1 to 10 billion loops) and you want to exit after some amount of time x, what is the most efficient way to do this?
doing something like:
Code:
stTime=timer
do while timer-stTime < x
*do stuff*
loop
is slow...
i also could approximate the time per loop and only check when the counter passes that general area...but i dont want to use a counter either
I have been looking all over and cannot find an answer on how to do this. I work for a call center that takes inbound technical support calls. We recently added a chat support option for our end users. Our chat agents can take up to 3 chats at the same time. I need to determine the total amount of concurrent chats for each agent per day as well as the total amount of concurrent time for each agent per day. Below is a sample of my data. Notice how the start time on row 5 is earlier than the end time on row 4. I need excel to count this as a concurrent chat and then calculate the amount of time that was concurrent (in this example it would be 16 minutes). Currently I have 2000 rows of data and 30 different agents.
Start_Time
End_Time
Agent Name (Num)
6/3/13 12:13
6/3/13 12:24
14
[Code] .........
how to find the elapsed time and the amount due.
G
H
I
J
K
L
M
[code].....
Is there a way to freeze the user input when it first comes up for a given amount of time. In essence, I am trying to force the user to read before clicking.
View 9 Replies View RelatedI have a 5K Excel 2010 workbook with VBA code that until yesterday, took about 30 sec. to run.
Today, after installation of WIndows7 Home Edition automatic updates, the running time has increased to about 4 min.
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies View RelatedFirstly, i'd like cell G5 to show the amount of time worked i.e diff between E6 & F6. Secondly I'd like help with the formula for cells AF6 & AG6 which would require AB6-AC6 divided by the frames, every time I try it I get a messed up answer.
View 14 Replies View Related=INDEX({"$5.00","$3.00","You Were Late"},MATCH(L17,{7:00am,7:05am,7:06am},1))
i have this formula in excel...this formula sanrv1f posted to help with another question (values changed) but i thought i would work with what i wanted but i get a (Value) error
so what im trying to do is base on the system time is if the person typed in
if they were early 6:45am to 7am they get Extra $5 on top of the $5 they get for being on time.
6:55am gets $5
7:00am they get $5.00 for being on time
if they type 7:01am to 7:05am they get $3.00
if they type 7:06 to 7:10am would return You Were Late
after 7:10am would return No Pay
so Ex
D4 *answers in E4 *
7am would get $5
7:03am am would get $3
7:07am would get You Were Late
7:11am Would get No Pay
if they were on time 5 times (ie 5days in a row) they would get a bonus of $20 i tried factoring this in could not do it :/
basically I need an excel sheet to calculate the period of time between cells.
For instance, in A1 I write:
18-Feb-10
In A2 I write:
13:00
Unfortunately I cannot write 18-Feb-09 13:00 in just one cell because it doesn't work.
Now, in B1 I write 19-Feb-10
and in B2 I write 15:14
Now we know that 26 hours and 14 minutes have elapsed between these two times. So if I want this to automatically be calculated in B3, what do I do?
Also, how do I apply the formula to all cells in column 3 so all I have to type in is the date (in column 1) and the time (in column 2)?
I have the following code below for a timer in a userform. Right now it is configured to start when a button is clicked. I would like to have it automatically start the timer after the workbook is open for more than 5 minutes but so far have been unable to get it to do so. I have tried putting the code in the workbook module but it still won't run. It also has a button to reset the timer if they need more time in the workbook and also a button for them to save and close the workbook if they are finished. I'm running Excel 2007.
VB:
Private Sub CBReset_Click()
Dim T, E, M As Double, S As Double
T = Timer
Do
E = CDbl(Time) * 24 * 60 * 60 - T 'elapsed time in secs
M = AllowedTime - 1 - Int(E / 60)
S = 59 - Round((E / 60 - Int(E / 60)) * 60, 0)
[Code] .....
I am trying to calculate the total amount of kilos for a specific date with a given time range.
As well as the average time they have been handled with in the same specifications.
Attached is a sample sheet of the info I am working with but I cant seem to get the formulas to work.
Book1.xlsx
I'm having a DICKENS of a time on this one. To explain, I have 3 columns where time is entered: a 'Time of Call', 'Time of Arrival', and 'Response Time'. The 'Response Time' cell autcalculates by simply subtracting the 'Time of Arrival' form the 'Time of Call' and using the difference to show the response time. To make time entry into the 'Time of Call' and 'Time of Arrival' simplier for my co-workers, I formatted those cells as 00:00 so that anytime you enter a number it will convert it to a time format (i.e., if you enter in the numbers 745, it will show as 7:45 in the cell). Because of this, when the response time is configured, it does it in hundreds instead of time format. So, if you enter in 7:45 as your time of call and 8:15 as your time of arrival, it shows 70 minutes as a response time because it sees the 7:45 as a whole number...745. Therefore, 815-745 DOES equal 70, but...that's not what I'm looking for. I want it too configure this as time...not as whole numbers.
View 2 Replies View RelatedI know how to calculate the duration elapsed between start and finish time. But how can I display the total time if for eg it's ends up being 300hrs?
I need the hours spent in the building per day and then the grand total per month.
I'm trying to calculate the variance between planned date & time of arrival vs actual date & time of arrival.
I attach the workbook as am a bit useless at explaining myself....
What I've done is in H14 subtract the actual date of arrival (F14) from planned date of arrival (C14). This result is the only way I could think of dealing with crossing over midnight. As a result I14 should subtract the actual time of arrival (E14) from planned time of arrival (B14):
=SUM(E14-B14,H14)
This method works well when the arrival was later than expected but doesn't work if the arrival was sooner than expected.
I've browsed the net searching for a solution to my problem and found one solution altough not entirely what i was after, but it was very close. It was provided on another forum, of which i'm not a member.
[url] ...
I have a TAT target of <= 2hours, however this is complicated by weekends, holidays and jobs received after working hours and on weekends. I've attached the file, which contains detailed information about my problem.
I'm calculating the difference in time:
9:54-9:45 = 0:09
Now to convert this in minutes (in number format), I multiply this number with 1440:
0:09*1440 = 9
When I click the cell this number is actually 9.0000005, rather than exact 9. I need it to be exact 9 since I have to match this number from other excel sheet.
To sum up:
This is what I expect:
31.99999 should be changed to 32
10.000001 should be changed to 10.
I am trying to track how long a macro takes to run from start to end.
View 4 Replies View RelatedI managed to put together an array formula to calculate the last date that a rep made a sale. It checks two other tabs in the workbook to find the date, and if none is found, it leaves the cell empty.
{=IF(MAXA(IF('Daily Compliance'!A:A=B48,'Daily Compliance'!O:O),IF('Daily Compliance 11-07 to 4-08'!B:B=B48,'Daily Compliance 11-07 to 4-08'!A:A))=0,"",MAXA(IF('Daily Compliance'!A:A=B48,'Daily Compliance'!O:O),IF('Daily Compliance 11-07 to 4-08'!B:B=B48,'Daily Compliance 11-07 to 4-08'!A:A)))}
But it takes sometimes up to 4-5 minutes to make the calculations. Is there possibly a way to simplify it so that it calculates faster, with the same results?
I need to calculate an SLA.
I have 1 column called 'Date/Time Requested' containing the time and the date together, as in:
dd/mm/yy hh:00
I also have a second column called 'Date/Time Completed' containing the date and time in the same format as above.
I need a macro that compares the two and works out the following:
< 48 hours = "Within SLA"
> 48 hours = "Outside SLA"
I have a sheet to calculate Time Elapsed based on StartDT & EndDt taking into consideration the actual working hours in any working day and the function exclude the weekend. I am not a guru in excel but i found this formula in this website .
=IF(AND(INT(StartDT)=INT(EndDT),NOT(ISNA(MATCH(INT(StartDT),HolidayList,0)))),0,ABS(IF(INT(StartDT)=INT(EndDT),ROUND(24*(EndDT-StartDT),2),
(24*(DayEnd-DayStart)*
(MAX(NETWORKDAYS(StartDT+1,EndDT-1,HolidayList),0)+
INT(24*(((EndDT-INT(EndDT))-
(StartDT-INT(StartDT)))+(DayEnd-DayStart))/(24*(DayEnd-DayStart))))+
MOD(ROUND(((24*(EndDT-INT(EndDT)))-24*DayStart)+
(24*DayEnd-(24*(StartDT-INT(StartDT)))),2),
ROUND((24*(DayEnd-DayStart)),2))))))
the formula works perfectly except for the fact that in our part of the world we have "Friday & Saturday" as the weekend days instead of Saturday and Sunday.
is there a way to get this formula or any similar formula to take different weekend days and do exactly what i need?