I have a column with time data in HH:MM:SS format. I need to find the average and sum of the entire column. But the problem is it does not give me the sum or average...
If I press F2 and then Enter in each of the cellsthen I get the sum or average. However, as there are thousands of entries, it's not possible to manually do F2 and Enter in all the data.
Is there a way to do it (F2 & Enter).
E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
i have two columns...a and b (a w/ names, and b w/grades). then i have the table lookup with names and grades all mixed up for many rows. i want to be able to average the grades with appropriate names.
=average(vlookup(name, table, column, false))?? i don't get it to work and how can i specify the grade to average?
TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv)
If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)
The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.
Can I get a minimum average and a maximum average, I have a worksheet with days of supply for 100 stores with about 100-200 products each, the dos resides in column D.
I was going to create a summary page and reference column d.
The following just gives me the min, I want the min average if possible:
I am attempting to calculate Grade point averages for my students for all classes. There are 5 columns of grades to be considered. I frist assign values of 0-5 to the grades then average the points. My problem is that I want the AVERAGE to ignore the zero but it calculates it as well. (I enter a 0 if I have no grade for that class.) I have tried the{ } to make it an array formula but this also did not work. Here is what I have, can anyone help?
=SUM(AVERAGE(IF(AND(L2>89,L2<100),5,IF(AND(L2<90,L2>79),4,IF(AND(L2>69,L2<80),3,IF(AND(L2<70,L2>59), 2,IF(AND(L2>0,L2<60),1,0))))),IF(AND(T2>89,T2<100),5,IF(AND(T2<90,T2>79),4,IF(AND(T2>69,T2<80),3,IF( AND(T2<70,T2>59),2,IF(AND(T2>0,T2<60),1,0))))),IF(AND(AB2>89,AB2<100),5,IF(AND(AB2<90,AB2>79),4,IF(A ND(AB2>69,AB2<80),3,IF(AND(AB2<70,AB2>59),2,IF(AND(AB2>0,AB2<60),1,0))))),IF(AND(AJ2>89,AJ2<100),5,I F(AND(AJ2<90,AJ2>79),4,IF(AND(AJ2>69,AJ2<80),3,IF(AND(AJ2<70,AJ2>59),2,IF(AND(AJ2>0,AJ2<60),1,0))))) ,IF(AND(AR2>89,AR2<100),5,IF(AND(AR2<90,AR2>79),4,IF(AND(AR2>69,AR2<80),3,IF(AND(AR2<70,AR2>59),2,IF (AND(AR2>0,AR2<60),1,0)))))),-1)
I know it is huge. The syntax is correct. It calculates the average, but always for all 5 columns. It will not ignore a 0 in a column.
I'm using the formula =AVERAGE(B16:L16) to give me the average.
However I have a couple of problems with this. Firstly I would like to exclude the value zero from the average. Secondly to also ignore the lowest and highest values.
Example, if the values in the cells are 0,1,2,3,4,5,6,7,8,9,10 then the current result shows 5, by ignoring the 0 and lowest value 1 and highest value 10 the average should be 4.5.
Ok, I for some reason just cant wrap my head around this. I need to to get the average time per call of two rows, but they are based on how many calls taken.
so in one column i have 50168 calls taken at 4:21 seconds per call. and in the next row i have 597 calls taken at 5:20 per call. I need to see what the new average will be with them combined, and I need it to display in m:ss form.
to formulate Excel formulas to obtain the average buy price and average sell price for me to do this futures trading. Thanks a lot. I downloaded the Htmlmaker to post the spreadsheet here to show the manual way to calcualte the average buy price and average sell price but when it is on html form, i clicked on the 'Please click this button to send the source into clipboard' button & then i paste into this thread. Is the way to make my spreadsheet appear here correct cause it cannot work.
View 9 Replies View RelatedI wish to average the best three values (highest) of the last 5 values ( excluding zeros ) in a row.
View 2 Replies View RelatedWhat I am trying to do is track a 10 week rolling average, where scores are entered weekly in row A6 thru W6. The formula needs to count back starting with W6 until it counts 10 scores then average them. Some cells may be blank.
View 14 Replies View RelatedI have a list of 16,000 numbers in a column. I need to average every 62 consecutive entries, i.e average of 1-62, 63-125, 126-188.......
View 2 Replies View RelatedI have a spreadsheet which has data in the format of:
Date
Sales
Monday, 8 July 2013
191
Tuesday, 9 July 2013
180
[Code] ....
I calculate the average of the last four weekdays individually with =Average(A1,A8,A14..) in a cell above them to get a four week average.
Each time I add a new weeks worth of data, I manually adjust the formula to remove the first cell, and include the latest cell with new data.
I'm looking to find out if there is a way I can automate adjusting the formula so it always grabs the last four Mondays (for example)? Either in VBA or a formula.
Here is my code as it is right now (With the correct range, and yes its a messy range :
[Code] ......
That is my range and thats the range I have to use (The stats are spread out in those rows. How I can get this to disregard 0's? Right now it seems to fail on the third rangevalue (For example in the range above it fails and highlights Y88), but if i remove that value it does the same on the next one instead, always the third.
I have tried =AVERAGEIFS(Range,">0") versions and also ones with /COUNTIF after and others but cant get this to work.
screenshot.jpg
Ok, so from the attached picture (screenshot.jpg), you will see a data export of staff losses.
On the table to the right, i need cell G2 to take the ID from cell F2 and then search column A and add up every time there is negative number in column B.
So if staff ID has -15 , -15, -10 and -10 in the first table, their summary on the right table will show -50
(PS, i know it says AVERAGE LOSS) but i just need it to be the total. So basically, from the loss log on the left, it just counts the total losses occurred by each individual staff member on the summary table to the right.
i m using this to get average
r4/s4 = result(t4)
r4 = 5
s4 = 517
Result(t4) = 517/5 = 103.4
now i use the roundup function to get the decimal less value
=Roundup(t4,0) = Result = 103
i want both function in one function to get result
Cell: F6 is to represent "average weekly offering".
D2:D53: represents the Total Given Year To Date.
I need a Weekly Average for Offering, so is it possible to have a formula that can show the average weekly offering in cell F6?
Is there a way to average every other row in excel?
View 7 Replies View RelatedThe title isn't very good I know; I don't know the right terminology to explain the problem properly, but i'll give it a go: In column A I have a list of names, all of them appear multiple times. In column B there is a corresponding percentage. I would like to create a formula that takes the average of all the percentages that have the same corresponding name, or 'category'. I don't want to just go through and do it manually since there are roughly 32,000 different values.
I did have one idea; in column C I pasted in a list of all the possible names in column A and then in column D I used countif to find out how many times each name recurred. If both columns A and C are in alphabetical order, I thought I could use the normal average function, by doing, for example AVERAGE(B1:BD1), but this didn't work. Is there some special way in which you can use a cell name (i.e. D1) instead of a number in a cell range? I tried brackets, speech marks etc. but nothing worked. I have searched around a bit on this forum to see if my question had already been answered, and did some extensive googling, but I couldn't find a solution.
I have a spreadsheet with days of week and places saved as text values, and I need to get averages for specific items,
for example,
Day of week in A1, place in A2, number in A3
I want to get in A4 say, the average of the numbers for all sundays at cambridge.
Any ideas how I could do this?
Could you please supply a formula that will calculate a four week rolling average of column B in relation to the dates in column A? I tried using the average and offset functions but can't quite get it to calculate the correct averages.
View 9 Replies View RelatedWithin a worksheet I have data like this in a column (actually, lots like it in many columns):
View 3 Replies View RelatedField 1 input: Beginning Date (e.g 7/17/09)
Field 2 input: End Date (e.g. 7/23/09)
Need: Average costs on and between these given dates
From table with this information:
Date Market two
7/16/2009 80
7/17/2009 80
7/20/2009 82
7/21/2009 84
7/22/2009 82
7/23/2009 82
7/24/2009 82
7/27/2009 82
I need Excel to average Market two 7/17 to 7/23 (80, 82, 84, 82, 82) based on the dates I give it.
If I change the date to 7/20 to 7/24, I then need excel to average (82, 84, 82, 82, 82)
How can I get Excel to average based on different dates? Or basically, how do I get it to pull rows between 2 inputs?
I am needing to do a formula based on a range of data that will return the top third middle third and bottom third.
Example Data
W X Y
Gross Gross
Margin Margin% Rank
51,241 36.46%2
25,584 19.56%20
19,914 16.26%40
17,188 14.27%52
19,167 15.55%43
6,828 5.23%84
48,076 29.17%3
18,282 13.78%47
16,896 12.75%58
16,124 12.14%64
16,549 12.27%59....................
I first need it to look in the rank column for highest number and divide by 3
Then I need it to give me the average Gross Margin if rank is between 1-32, 33-64, 65-95
I have this for the top and bottom but can't get the mid range to work(except it doesn't automatically calculate)
SUMIF($Y$8:$Y$102,"<33",$W$8:$W$102)/32
I have tried averageif....
Using rank to calculate this may not be the most efficent way
I'm getting the error that tells me I have more than 30 arguments when trying to get an average of cells across a row. The biggest issue is that I don't want to average all the cells in the row, just some of them.
I tried writing an IF statement for it and failed. What I want is every fourth cell to be totaled into the average. Another way to look at it is that I want every cell under the heading "south" to be totaled into the average.
i was given a formula in B15 which allows me to get the average of the figures that are submitted within that box not all 28 squares will be used hence the formula but this leaves me a #DIV/0! if no numbers are inserted.i need to get the average of all 7 boxes for totals but cant why i have this error there how can i oberride this so if all the boxes are blank it reads nothing
View 13 Replies View RelatedIn basic terms I have column A containing a list of dates, starting from 01/01/2005 and increasing by 1 day for each row, In column B I have the value for the day. These dates and values are still being used so the number of rows will increase day by day. I would like a formula to tell me the average total for January. So it would need to SUM each January before giving the average. I realise I could prob do this with a pivot table but if someone could give me a hint for a formula that would be great.
View 2 Replies View RelatedI use VBA with the macro recorder. Now I'd like to programming a code to calculate the average of three cells.
I've done a lot of measurements about 180 but it can be also more. For one test object I've always done three measurements to get then an average.
My values are beginning in cell C2:CXXX, D2:Dxxx and E2:Exxx. For example I'd like to get the average from C2:C4, D2:D4 and E2:E4. The result of C2:C4 I'd like to have in cell H2, the result of D2:D4 in cell I2 and the result of E2:E4 in cell J2. Then the next calculation is C5:C7, D5:D7, E5:E7 and the results in H3, I3 and J3. And so on.
I've attached my excel file, maybe I didn't explained it well. The VBA-Code is for sheet Export.
CalculationE.xlsx
Have set up a range named DataOpen. Within the range are numbers & 0. Do not
want to average the cells that contain 0's
I am calculating the length of time someone has worked for the company:
Column; Row A1,
Hire Date MM/DD/YYYY
Column; Row B1,
=DATEDIF(A1,NOW(),"y") & " years, " & DATEDIF(A1,NOW(),"ym") & " months, " & DATEDIF(A1,NOW(),"md") & " days"
Which gives me a result like: "4 years, 5 months, 10 days"
I want to be able to average the results from column B, thereby producing the average "years, months, and days" worked. Just not sure how to get there.