Average If Your Data Contains A 0

Mar 6, 2005

Have set up a range named DataOpen. Within the range are numbers & 0. Do not
want to average the cells that contain 0's

View 14 Replies


ADVERTISEMENT

Average Daily Data Into Month And Year Data

Feb 26, 2014

I want it to average based on month and year. I have daily data and want to average everything for say January 2000 into one cell and February of 2000 and so on. Column A has date (mm/dd/yy) and column B has data.

View 13 Replies View Related

Get Pivot Data: Pull Out The Data From The First Column(A), And Then Average

May 31, 2006

I have a Pivot Table, with lots of data in, what I want to be able to do is on a separate sheet pull out the data from the first column(A), and then average out the figures from Columns(B-E).

When this has been done on the sheet (with the average data) in the next column, I then want to use Column(F) (from Pivot Table), and do a simple sum to work out 5% of the difference if it is greater than ZERO between Average Column and Column(F) (from pivot Table) Column(F) must be higher than the average in order to work out the 5%.

View 3 Replies View Related

Average Column Of Cells But Ignore Errors And Return Average Of Numbers That Are There

Jun 14, 2013

E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).

E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.

I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.

View 14 Replies View Related

Average Interval In Corresponding Data?

Feb 7, 2014

I have geological readings "W,X,Y & Z". For every drilled hole I have these readings recorded for individual intervals (i.e. 1-2m, 2-3m, etc.)

However, the intervals have now been grouped together based on other (unlisted) specifications.

Now I am tasked with averaging these readings "W,X,Y & Z" for the decided groupings. For example.... if intervals 1-4m have been grouped for the first hole, what is the average reading of "W,X,Y & Z" over this new interval?

I have attached a file which displays the layout of the spread. To the left is the original data, and in columns I:K are the new 'groupings' of intervals. Ideally, I would like to generate the average table to the right of the original data (highlighted in green).

So basically, I need some vba code to average the readings in the 1st table conditionally to correspond with the grouped intervals in the 2nd table.

View 1 Replies View Related

Get Average Of Filtered Data?

Apr 7, 2014

I have a pivot table with multiple supervisors and emloyees, I need to be able to find the average of a supervisors department and compare it with an employee with the employee seeing everyone else's data.

I don't have access to the original data that drives this pivot table. Is there some way I can use a calculated field to contain the average performance of all the employees under this particular supervisor?

View 3 Replies View Related

AVERAGE Date With Data

Mar 21, 2014

i have an Excel sheet that contains Dates and Number of Logins pr Hour I need to get the average number of Logins pr hour each day.

Like this
Date Logins Average Login pr hour That day
21.03.14 12:00102 21.03.14 91.8
21.03.14 11:00107 20.03.14 83.25
21.03.14 10:0053

[code]....

View 2 Replies View Related

Average Data In Column

Nov 25, 2008

I do not use excel very often but know there is a simple formula to take the average of numbers inputted into a column. For example, I would like to sum all the values entered into column “D” and then divide that by the number of entries

4
5
3
1
4
11
6
2
0
----
36/9 = 4

If I were to add another entry it would automatically change the divisor to 10

View 7 Replies View Related

Average Only Columns With Data

Nov 10, 2009

I have twelve columns of data nine of which are filled. I'm trying to come up with a formula that averages a column only if it has data in it, I have attached a sample file. As I add data the average should change without changing the formula.

View 2 Replies View Related

Average In Filtered Data

Oct 29, 2008

I have a worksheet with exported data from a database query. I used this formula to compute the average of a column without taking the ZERO value:

View 5 Replies View Related

Average With Missing Data?

Dec 11, 2013

I need to be able to create an average total that skips any missing information. For example, if I have four values I need the average for all four (e.g. 5+6+7+3/4), but if one is missing I need the average of three (e.g. 5+7+3/3).

I found the array formula: =AVERAGE(IF($A$1:$A$50,$A$1:$A$5)) [Note: I pressed Ctrl+Shift+Enter to make it an array formula]. Which works perfectly for cells that are next to each other (e.g. A4:W4). The trouble I am having though is that the cells I need to pull the data from are not next to each other e.g. (K4, N4, S4, W4).

I did try to ammend the array formula with the following: =AVERAGE(IF($K$4,$N$4,$S$4,$W$40,$K$4,$N$4,$S$4,$W$4)). But of course that came back with a "too many arguments" error.

How can I ammend this information to make this formula work.

Extra information if needed: The cells that have missing data are not blank or have a 0 value, they show a "#N/A" (which doesn't need fixing).

View 4 Replies View Related

Sum/average Even Column Data

Jan 11, 2008

How to sum or average the data in the even column ( I mean column 2, 4, 6, etc) in a range (like range A1:DD1)? I tried to use Mod and Iseven to get it but failed.

View 9 Replies View Related

Average Filtered Data?

Aug 1, 2007

Is it possible to AVERAGE() the numbers that remain from a filter, and average only those numbers? Can the AVERAGE() change with the criteria that are filtered?

View 2 Replies View Related

Average Excluding If-error Data

Apr 13, 2014

I've got set of data in columns B, E,H,K, N, Q, T and W. Some of columns are with if-error and some are not (Attachment). I want to find the average excluding if-error data columns. Another way, columns with if-error data should not be counted when average is calculated(In column X).

View 3 Replies View Related

Average If Data Is In Same Month Of Same Year?

Jun 4, 2014

So I have some data that I would like to have average only if that data was entered in the same month and year as specified in another cell. What I have tried so far is:

[Code] .......

-RenewalMonths is a dynamic range where each cell in the range shows the month of the date in that row.
-RenewalYears is the same but for the years.
-RenewalOverallStuff is a dynamic range where I would need to average the data that meets the criteria.

View 2 Replies View Related

Conditional Average Of 2 Data Columns?

Jan 18, 2014

I am trying to get the conditional average of 2 data columns.

data_1 category data_2 category
2.5 Yes 1.2 No
4.2 No 2.6 No
3.5 Yes 3.9 Yes
4.1 No 2.5 Yes

What I need is the average across the 2 data columns (data_1 and data_2) for category Yes and category No. I know I can use averageif to get the conditional average of 1 column, but that doesn't work with 2.

View 5 Replies View Related

12 Months Rolling Average For Data

Feb 13, 2014

Now I'm trying to do 12-month rolling average for my company data?

View 1 Replies View Related

Calculate An Average As Data Is Entered?

Aug 26, 2009

I'm using Excel 2003. I have about 190 rows that I use on any given day to enter start times & end times. I calculate the difference in Column E. Is there a formula that will calculate the average time as I enter them in the rows? Some days may have only 100 entries, other days may have as many as 190. I don't want to keep adjusting the average formula for column E.

View 2 Replies View Related

Average Based On Data In Two Columns

Dec 30, 2008

I am trying to include numbers in an average if two separate columns prove true. For example, I want to include all numbers in column "C" in the average if the cell in column "A" matches a name and the cell in column "B" is equal to the number 1.

View 2 Replies View Related

Sum And Weight Average Variable Data

Dec 13, 2008

Hi there, been using this for a number of years now, but never had to post a question - I guess most things are already answered - but this one is a bit more tricky.

I want to calculate a totals and a weighted average based on months from a data set that has duplicate ID's and variable data (attached example).

I would like to calculate the total tonnes by month and the average grade of those tonnes. Using the 'month ID table' as a reference to the 'Raw Data table'.

Is this possible using if and vlookup functions or will require a higher level of programming knowledge?

View 6 Replies View Related

Average Daily Data By Month

Jan 15, 2009

I have a workbook with two sheets - DATA and SUMMARY.
DATA has two columns - date and data_value. Data will be added to this sheet on a regular basis

SUMMARY has two columns - month and average

In the column for average I would like a formula to calculate the average of data_value for each month without having to manually determine the range for the particular month.

View 2 Replies View Related

Monthly Average From Daily Data

Oct 28, 2011

I have data in the following format (columns A & B):

Code:
Day Value
1/1/2002 2.1
2/1/2002 4.8
3/1/2002 0.1
" "
" "
" "
31/12/2011 5.2

I'd like to be able to write a formula so that I can get the daily data averaged over each month, e.g so that I have something like:

Code:
Day Value
Jan 2002 3.3
Feb 2002 4.3
Mar 2002 3.1
" "
" "
" "
Dec 2011 4.2

I'd like the data in monthly averages so that I can graph them. I have read about array formulas and averageif statements, but I can't seem to combine them to make them work.

View 7 Replies View Related

Macro To Average Data By Day In Month

Jan 13, 2014

I am trying to create a macro (pretty new) to take a sheet of data and out put the average of each column by date. The data will be filled every month and the numbers i need should be one for the 1st, the 2nd and so on for each day.

Here is a sample of the data in the sheet, i would attach a spreadsheet but cant seem to find out how.

TimeStampUTC
Air Volts
Dry Volts
Dirt
Dirt Fraction
Temp

12/1/13 0:47
4.1180
2.3714
0.5735
-0.6800
11.1674

[Code] ............

View 3 Replies View Related

Average Data With Specific Criteria

Apr 6, 2007

I have a data base with 12 columns of data. I need it to look for one criteria in one row, match it, look for another criteria in another row, match that, and then once those criteria are met, average those rows that met the criteria with the statistics in that row that contains a value.

Such as:
Monica 2 Timed 310 Michele
Tom 3 UnTimed 410 TC
Art 5 Timed 216 TC
Monica 4 Timed 415 Michele
Tom 6 Timed 200 TC
Tom 4 Untimed 216 TC
Art 8 Timed 410 TC

What I need is the formula to search in through the data, look for Tom, then find all the ones that say UnTimed, and then average the number in column 2 that match those criteria.

View 9 Replies View Related

Average Calculation Only When Cell Has Data

Oct 5, 2009

Im trying to work out a function that will calculate the average accross a 3 column array. Obviously there is but I need to make any cell's with 'Free' give a value of 0.

I need some kind of IF("Free",1) type thing, to run before the average calculation, but I dont know how to put it together to make it work, I thought about a Loop, but then how do I make sure it only goes to the next cell in the selection?

View 9 Replies View Related

Average Of Last 12 Rows Of Expanding Data

Oct 20, 2009

I have a table of data to which new figures are added each month as follows:

MonthHeadcount
Jan-081867
Feb-081942
Mar-082020
Apr-082020
May-082020
Jun-081980
Jul-081941
Aug-082000
Sep-082000
Oct-082060
Nov-082060
Dec-082143
Jan-092101
Feb-092101
Mar-092186
Apr-092208
May-092319
Jun-092389
Jul-092437
Aug-092486
Sep-092462

"Month" is in A3, "Headcount" is in B3. Figures are on rows 4:24

What I need is a formula that will average the last 12 rows of data so that when a new record is added, the average will update automatically to include the newly added row, but still only look at the 12 rows (i.e. for the data as listed it would average rows 13:24 (Oct-08 to Sep-09), but when data for October is added, it would average rows 14:25 (Nov-08 to Oct-09).

View 9 Replies View Related

Hourly Average With 15 Minute Data

Nov 6, 2009

I have a large sheet with the values of power from a counter in a 15 minute base.

A B
01.01.09 00:15 0,25
01.01.09 00:30 1,15
01.01.09 00:45 0,75
01.01.09 01:00 2,01
and son on until the end of the month
What I am trying to do is to create a macro which calculates the average per hour and put in another columns like this:
01.01.09 01:00 average from 00:15 until 01:00
01.01.09 02:00 average from 01:15 until 02:00
and so on until the end of the month.

View 9 Replies View Related

Average And Cell Data As Worksheet Name

Jan 12, 2007

1. if i use an average function, and there is nothing in the cells in the range that i am choosing, how can i get a zero answer rather than a # div/0 error. I have several sheets and several columns on each sheet where average is being used, but not all of the columns contain data. However, if the average is 0, i need it to show 0 and not the error.

2. is there a way to link a cell's data to automatically name a spreadsheet?

sorry if #1 is confusing, i've tried several ideas. i'm thinking that something like "if the value of (cell)=blank, then (cell value) = 0, but i don't know how to put that into formula format.

View 5 Replies View Related

Function To Count And /or Average When Data Changes Daily?

May 22, 2014

I have a spreadsheet that contains developer related data. I want to be able to do a weekly analysis of average construction time and costs. The problem I am running into is properties enter rehab phase and exit rehab phase throughout the week.

For example:

I want to know the average $ spent and total rehab time week 1 of april. I may have 4 homes that entered rehab that week and 3 that move out of rehab that week. Moreover, I need to ensure those homes that entered and are still in rehab for that week are counted. How do I accomplish this feat?

View 2 Replies View Related

Average Numbers Based On Other Two Columns Of Data

Jan 23, 2014

I have three columns of data, one containing numerical values. I want to average the numbers based on the other two columns of data. Attached is an example file with the desired output I'd like. What is a formula that will do this?
AverageExample.xlsx

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved