Average Of Angles (headings)
Oct 11, 2007
I have data sent to me describing angles as integers from -180 to 180. I need to average these angles together. For example, the average of 10 and -2 should be 4. Great. However, the average of 175 and -175 should be 180.
Has anyone ever worked with this type of issue?
(I've thought about converting -175 to 185, but then I have trouble with 5 and -5, which becomes 355).
I should probably note that I have a list of angles, not just 2. The analysis I need to do is 1) average of all angles and 2) difference from the average for each angle.
View 9 Replies
ADVERTISEMENT
Apr 26, 2008
Iv got Column A with angles between 0 and 1.56 radians. These angles are generated randomly, so it can be 0.22, 0.56,1.55 etc etc...Now in column B Iv got to carry out a function. The function is =43.22/COS(AX) X depends on the corresponding value in column A.
Every thing is fine up to here and I can do it...BUT I only need to carry out the function if the angle in Column A is smaller than 1...And if the value is bigger than 1 it only needs to output a value of 80. Thats it so...depending on the value in column A it will either carry out =43.22/COS(A) OR just make it show =80.
View 2 Replies
View Related
Feb 8, 2013
I'm trying to plot a chart of some sort in Excel to display 4 angles that different blood vessels branch off the aorta. Ideally I'd like to input the values of these angles which would vary from patient to patient and have them be displayed in some kind of chart. The chart I'm hoping to achieve would be cirular with the 4 angles represented by spokes which extend out all of the same length. I've attached a rough sketch to show what I'm trying to achieve and I'd be hoping to be able to change each angle in a worksheet and have the chart update to reflect.
View 9 Replies
View Related
Apr 16, 2008
Can Excel Draw Shapes or Angles based on Data?
I have a radiation Excel file that solves for Radiation intensity using Distance and shielding as reducing factors.
Similar to a circle of light being less intense with distance so is radiation.
I need excel to draw a circle from a point specified based on a value I give.
For example at 1 ft I might have 500 R in 1 hour (life threatening!)
At 16 feet I have about 2 R in 1 hour (not safe for too long)
These circles would be overlayed on an map.
I would like to draw a new circle at various distances, simialar to a bullseye.
I would also like a triangle drawn based on angles and SIN / COS / TAN formulas
Could this be done in VB or preferably without.
View 11 Replies
View Related
Apr 17, 2008
Can Excel Draw Shapes or Angles based on Data? I have a radiation Excel file that solves for Radiation intensity using Distance and shielding as reducing factors. Similar to a circle of light being less intense with distance so is radiation. I need excel to draw a circle from a point specified based on a value I give. For example at 1 ft I might have 500 R in 1 hour (life threatening!) At 16 feet I have about 2 R in 1 hour (not safe for too long). These circles would be overlayed on an map. I would like to draw a new circle at various distances, simialar to a bullseye.
I would also like a triangle drawn based on angles and SIN / COS / TAN formulas
View 2 Replies
View Related
Oct 5, 2009
I need a vba code which inserts a text/heading into an excel chart.
Today I wrote the heading inside the code, in this way:
View 8 Replies
View Related
Feb 8, 2010
Is there a way to hide the formula bar and headings for a specific worksheet(s) with a workbook but not all the worksheets? In other words, I want to hide the formula bar and headings only for certain worksheets. When I select hide on the show/hide ribbon, it hides it for all the worksheets within a workbook.
Also, is there a VBA code that can be written to hide formula bar and headings for a selected worksheet?
View 9 Replies
View Related
Nov 23, 2006
I have a workbook. Numbers On The Left And Letters At The Top of all sheets cannot be seen. How can I make them visible?
View 2 Replies
View Related
May 10, 2007
I use currentRegion to add the item to the combobox, but i don't know how to add without including the first cell in the range,as usually, it is the field name.
View 5 Replies
View Related
Jun 14, 2013
E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
View 14 Replies
View Related
Aug 6, 2014
I've got a few worksheets that have staff names on Col A. And these names are under sub headings of what position they work in (Foremen, Operatives etc..).
Before I had access to them, the names were not in order, now I've change it to A-Z, for each staff under their position.
I know you can make your own custom order list, so the list goes top to bottom : Supervisor, Formen, Operative, Office.
What I sometimes need to do is sort Col B or C. But is am unable to sort it back to it's original state
Attached is an example of how I would like my spreadsheets to look. But is there a way to use Sort & Filter so it sorts the entire table by position, keeping the correct name under the correct position heading.
New Microsoft Excel Worksheet (2).xlsx
View 9 Replies
View Related
May 24, 2007
I use a macro to format a debtors ledger. This report shows the amounts that customers owe broken down by the age of the debt, ie Current, 30, 60, 90, 120 days.
To make it easier to read I want macro code that will replace these mostly numeric headings with months ie April, March, February, January, December.
View 13 Replies
View Related
Jun 16, 2009
I want to save a worksheet as a CSV but Excel saves the column headings as the first line of the saved csv file. I don't want the column headings in the saved file.
View 3 Replies
View Related
Nov 20, 2009
My questions is how to "freeze pane" a row of headings on the Results page and post the results onto row 2 and downward *without* deleted row 1.
If you look at the attached file, you will see a tab that I created called "My desired Results Page" that simply has a frozen row of cells. Instead of just displaying the rows from the Details page on the Results page, I'd like them there but with the headings at the top.
Is there code that can do this?
View 5 Replies
View Related
Nov 14, 2006
I am trying to find out if i can reference to a table on Excel. For example; if i enter in one cell the word 'january' (a header on the left of the table) and 'week 1' (a header on the top of the table) in another cell, can i set it to produce the value in the table that coresponds to the two headers.
View 2 Replies
View Related
Nov 22, 2006
Assuming I have a data martix which is X* Y. I want to store a range that is at Row Z. I have named a single cell at Row Z as "dataStart". How can I store that Row without the header?
View 5 Replies
View Related
Feb 10, 2007
as you know at the top of the excel 2002 worksheet there are headings:
A B C D E etc etc
how do i change these (A,B,C,D,E) to my own personal heading?
example:
A = Title B = Type C = Subs etc etc
or do i have to 'drop' all the info down by 1 level?
i really need to keep the 'numbers' for the colums so that the 1st entry doesn't start at A2
View 2 Replies
View Related
Jun 21, 2007
TAKING A BIT FURTHER THE POST Find Min Value In Multiple Columns And Match The Header
Here's my problem: I am trying to find the MIN value in a column with dual headings and match the corresponding product which makes my formula with three criteria.
see the attachment to see the structure of the tables and further explanation.
View 4 Replies
View Related
Jul 18, 2007
how do i go about coding a macro so that it can look at a column,lets say column F in this case, on a worksheet and figure out how many rows contain data, select all rows BUT the header row (row 1 in this case), select them for copy, and paste them to another spreadsheet in the xls file starting from row 2, pasting values only.
the way i would LIKE to do this function is to take column 1, determine its length, or how many rows contain data and where the first empty row kicks in, anchor that into a variable and use that variable to set the copy paste function for the remaining columns i run the function on. why do i need this done? i'm makign a macro that can automatically build reports for me from raw data dumpted from the system.... and later columns in the spreadsheet have empty cells, so i want the function to process at a fixed length with all cells using column one as a guide for the copy/paste function
View 4 Replies
View Related
Jun 19, 2014
I have an excel file with multiple sites and I need to delete empty rows base on two repeated words in column A. Empty Rows need to be deleted between the cells in column A called Litter and Community. There are other empty rows that need to stay in so only rows between "litter" followed by "community".
View 3 Replies
View Related
Apr 2, 2014
See the attached excel workbook:
SAMPLE_PivotTable.xlsm
View 2 Replies
View Related
Apr 5, 2009
The first five columns of my table contain row titles. I'd like to keep these columns stationary while I scroll horizontally through the remainder of the columns.
As it is now, only the row number remains stationary, but I really don't need the numbers, just the row titles.
Is there any way to do this? And would this also be possible with column headings (so I can scroll down without them moving up)?
View 2 Replies
View Related
Nov 10, 2013
I want to put in the column headings "listbox" exactly as it is in the sheet, but non-contiguous columns
View 3 Replies
View Related
Aug 5, 2014
Having trouble consolidating 3 worksheets into one worksheet, on these 3 worksheets they all have the same headings which go from A-R. I simply need to be able to run a formula or use some sort of method to incorporate all 3 lists into 1 master list. The only way i currently can do this is to create a vba script which simply copies say 500 rows from the first worksheet paste onto master spreadsheet then copy 500 rows in second worksheet and find next blank row and paste etc.
Is that the best way to do this or is there a better way?
View 1 Replies
View Related
Oct 31, 2008
My simple copy and paste macro copies data but while pasting it pastes data starting in cell A1 rather than A5. Code is as below. I thought of copying cell by cell but the problem is that this is only a very small part of code. Below code copies column C in source file and pastes into column A of destination file.
I would be doing about 50 of these columns transfers between two files and thought that copying cell by cell would take ages to run.
1) Can someone please help me resolving the above problem i.e pasting data in cell A5 rather than A1.
2) Secondly how can i add an OR to the autofilter criteria? for example below code filters based on criteria "CS"? what do i need to do to filter based on "CS" or "AS".
View 5 Replies
View Related
Jan 19, 2009
I am trying to figure this out. I have a userform with one listbox with 7 columns that displays a range. It is working except i cannot get the column headings to work.
View 4 Replies
View Related
Oct 13, 2009
Is possible to populate the headings of a listbox via code
I have a list box with three columns and need the headings to be
"Number" "Rider" and "Bike"
View 5 Replies
View Related
Dec 1, 2009
What it does is open a singlesheet Workbook and copy that sheet onto the sheet with the macro. It only copies this if the cell E1 matches in both sheets.
Now I'm trying to change this - I want to match a range - A1:V1 should match
View 8 Replies
View Related
Nov 3, 2008
I have a sheet where a name could appear multiple times in a 22 column data range. I would like to list all the names on a second sheet in Column A and in column B (and further columns as necessary) return the heading name of column where the name is found in cells next to the name.
I think Count If will work for giving me the number of times the name appears in sheet one but is there a way to return the column headings along the same row as the name?
View 6 Replies
View Related
Apr 9, 2012
I want to place this forumla "=IF(INT(B3/$U$1)=(B3/$U$1),1,0)" across my worksheet.
Now, I'm okay when dragging down as it works fine with the B3 changing to B4 and the U1 staying as U1.
However, I would like it so that when I drag it horizontally, the U1 becomes V1. I want it so that I can do this and it stays within the $. So when dragging sideways it becomes "=IF(INT(B3/$V$1)=(B3/$V$1),1,0)".
if this is possible and if so, how to do it?
View 2 Replies
View Related
