I am working on a spreadsheet which has a column which shows square footages (Column AE) and I also have a column which shows costs (Column Y).
What I would like to do is to bracket these footages in to 6 bands (0 - 5000, 5000 - 10000, 10000 - 15000, 15000 - 20000, 20000 - 25000, 25000+) and then average the costs within a particular band.
I am using a User Form to input data to a spreadsheet and have an issue. I've set the TextBox WordWrap & MultiLine Property to True and the textbox values don't show the reverse P character, but how do I get the "square" from populating into the cells on my worksheet? I was using this old thread as a point of reference, but didn't understand how to use or where to put it in my form. I'm referring to the code that Dave Hawley supplied. Strange Characters Pasting to Textbox
View 5 Replies View RelatedI have a Textbox on a Userform that allows users to enter text and code copies the text to a nominated cell on a sheet. My difficulty is that when the text is copied to the cell at the end of each line of text there is a small 'open square' symbol that I would prefer not to show. I can manually delete the symbol but would like it either not to appear of be able to automatically delete it. If I copy the text to a word file the symbols do not appear.
Private Sub CommandButton1_Click()
Sheets("Marketing").Range("b4") = UserForm1.TextBox1
Me.Hide
End Sub
I'm trying to Calculte the Averages of just the Teachers Salaries in my spreadsheet. If possible i would like to put the average at the end of each
of Teachers information.
Is there code that would allow me to do so.
I attached a sample file to view.
I need a formula to tell me whether a number is a square number, or I can do it so to see if the square root of a number is an interger. So far Iv been doing
A1 = 2
A2 = AND(RIGHT(A1,1)=INT(A1))
True or false outcome is fine, and it has been working fine on some examples, but the problem comes when I have 49, as it is 2 digits long. I've seen a formula similar to find the root symbol, and look at all the numbers upto this point (maybe FIND).
Workbook 1 has 2 spreadsheets. Spreadsheet 1 contains Item and Pass/Fail Columns. under the item column is the serial number of the item tested. the Pass/fail column has the serial number duplicated if it failed tested. what is the formula is to have spreadsheet 2 pick the items from the pass/fail column on spreadsheet 1?
View 4 Replies View RelatedI have a userform where I have 2 comboboxes. The first combobox shows the the first column (only 1 of each) and the second comboBox shows me the secondary list that correlates to the valuse in the first from column B. Now I have a text box that I am trying to get the value from column C depending on what I have in the first 2 comboboxes. What is the easiest way to do it? This is all in VB since it is a UserForm, and using Vlookup seems to be too many lines if I go that route. Is there a way to use Index and Match in VB where it would be more efficient? I attached just a sample of how the data would be layed out in the Excel sheet.
View 4 Replies View RelatedI have a chart in my spreadsheet that shows number of claims per defect. Is there a way to format this bar chart so that it will only show the top 5 automatically, even when they are constantly changing? There are a total of 13 different catagories.
View 9 Replies View RelatedI have a spreadsheet (rows 1-15) where column A is a list of items in ascending order, and column B shows the catalog# that the item appears in. An items can appears in multiple catalogs.
I would like to develop a spreadsheet(rows 18-21) that shows the items that appears in each catalog.
The items should still be in ascending order.
The order of the catalog# row18 does not matter.
I have several hundred items and 30 catalogs....
I need to add a background picture to a spreadsheet that only shows on the print area.
This spreadsheet is being used as a pro forma invoice that can be emailed to customers for them to view & print as required.
At the moment I can add a background image but this appears throughout the sheet and not in the place I need it to i.e. the print area.
I need a formula to automatically convert inches to square feet. I have =IF(G5>12,G5/144). and G5 is the cell used to enter your inch value. The formula wrks great, but only if you enter over 12 inches. I'm pretty sure Im on the right track, just need to know how to add in the part about if its less than 12 inches it should be multiplied by 12.
View 5 Replies View RelatedI know this ain't going to be easy if at all do-able, but would anyone know if there can be a formula/s made to calculate the largest size "square" shape (e.g. all 4 corners at 90 deg.) that would fit in to a known size Quadrilateral?
Value A,B,C,D and Z are all known values as are the diagonal lengths between corners
I failed dismally in Geometry at High school, but how was I to know that 35 yrs later I would need to know this stuff!!
Please see diagram for an idea of what I'm trying to achieve.
I am trying to work out the average volume of our daily downloads. I have used Vlookup to automate this. When there is no data it returns #N/A which is no problem. The problem arises when i try to work out the average for the month or peaks (MAX sum).
I have tried several variations of sumif/if/isna etc etc and am not having much luck. Below is an example of what i am trying to average out:
#N/A620#N/A
That is 4 different days download data - I want it to ignore the 0's and #N/A and return the average for the days we actually had a download.
In the following cells I have an average:
B6,J6,R6,Z6, and AH6 and a total average on cell AP6
How would I go about making a formula for that. The reason why I ask is because all the info I have seen refers to the cells with the averages need to be in sequence or range and nothing about the cells being seperated. I also tried using the countif method, but same prob, the cells need to be within a horizontal or vertical range
I have multiple sheets each containing multiple columns of numbers, and sometimes when the numbers are not present there is a text error string such as "#N/A N.A.", or "#N/A N Ap". An example of the data is as follows:
4.06
1.28
3.411
#N/A N.A.
2.627
1.157
4.9
4.9
2.963
I would like to put geometric averages of each column from each tab in a summary tab.
* I tried using =GEOMEAN(...), but it can not handle the quantity of data that I have nor can it take non-numeric fields.
* Also Tried something like this =EXP(AVERAGE(IF(ISNUMBER(C:C),LN(C:C)))) as an array, but unless cells are specified explicitly, ie c10:c300, I get an answer of 1. I can not specify the cells because I have a variable height of each column.
I am having trouble with the final formula for this spreadsheet.
I want to be able to select "Holiday/Sunday" from the drop down men in column H, and have it multiply the total in column F by 2. There is already a formula in column F that sums column E-D.
I have a first column, which contains random integers typically with gaps of between 10 to 50 blank cells. The data may have up to 5,000 rows in total.
In the next column along I would like a calculation which averages the integer in the first column out across all rows until another integer is reached in the first column.
E.g. In the first column, the first number is 60, then 9 blank cells till the next entry. In the second column the first 10 cells each contain the number 6 ( = 60/10).
I'm wondering if it's possible to have a formula applied to an entire column without adding unnecessary length to the spreadsheet until someone is actually scrolling down and using more rows. I want formulas to be constantly present in two columns to automatically calculate values as they are entered into other cells in the same row, but ideally without the otherwise empty spreadsheet being X amount of rows long.
I initially had the formula dragged down 15,000 rows, but it would really be much better if it could start out as a smaller size and then expand as the user requires.
I need is a formula that averages totals from different months out of the year. I already have a yearly average. That was easy. But what I need is a 3 & 6 month average.
I also need it to be most current, so when I am in September, it will take the 3 previous months and average them and same with the 6 month. Then when I move into October, it would take its 3 previous months, i.e. - July,August, September.
Below is my data point for each month. The goal I need to hit is 99%. So I need to figure out what minimum monthly percentage I need for the rest of the year, I will need to reach a goal of 99%, and if I can't reach it, return an error. Lastly, i want to be able next month to go in and fill in the AUG percentage with an absolute number (i.e. 89%) and then I would like the rest of the percentages to automatically update by figuring out the new minimum monthly average given the new value for August. I thought that I might be able to do that if there is a function that says "If cell is a number, leave it alone, if it's a formula, then include that cell in the calculation of the minimum monthly average.
Jan 89%
Feb 88%
Mar 83%
Apr 89%
May 90%
Jun 86%
Jul 82%
Aug
Sep
Oct
Nov
Dec
Goal 99%
I have Column A and B
I want to calculate the total of Column B where by there Column A shows figure "2929".
got this quite complciated formula.
any of the cells specified can be blank at start of spreadsheet
is there a way to hide the DIV/0 error from appearing
this is the formula:
=((((((SUM(C11:C14)*(100%-R2)+(SUM(ThroughputFormulas!C33:C36)*R2)*(L2/30))/1000)*N2)*3600)*P2))/(SUM(C39:C45))/1024/8
I already have a conditional format which is working OK. I would like to put a formula in the cell so it shows a % so currently it would be 100% as there is 3 cells below showing 3 greens.
Alternativily each colour is worth a value - Green = 1, Amber = 2, Red = 3. So Cell I3 would show 3.
I am trying to create a basic invoice spreadsheet.
On worksheet 1, I have days of the month A4 to A35. Columns B, C, D, E are headed.
Every hour of work I would enter a " 1 " in the correct cell for the day. For example, 1 hour, every segment of the day, I would enter "1" in cells Bx, Cx, Dx and Ex. This continues for the month;
On a 2nd worksheet, this is neatened up, and I have added formulas to work out the cost and type of call;
On the third worksheet, I want to display roughly the same, however when there has been no work on the day (ie the date displays "None" and the adjacent cells show: blank, blank, blank, blank, £0.00), I want it to skip the cell and display the next date which has data to show (ie a date). The data on the adjacent cells needs match with the date (in the same way as physically deleting a 'non worked' whole row).
This then on the invoice worksheet would look neat and display only the days actually worked.
What formula(s) could I use to do this.
Hi i have the following SUMPRODUCT formula which works as required, but when i clear the raw data and apply new raw data and apply macro that sorts my data, then all the ranges in the formula shows #REF!
=SUMPRODUCT((Raw_Data!C6:C5000=Summary!$B10)*(Raw_Data!A6:A5000=Summary!C$8)*(Raw_Data!E6:E5000>2))
I am facing an issue related to IF formula. It does show the correct result in one and another cell, but in a few others - doesn't.
This is strange since all variables are correct, and parameters are the same for every cell. And, in theory every cell should show the right answer.
In addition, the result doesn't change even when changing variables in cells that are dependants to cell where IF is located.
Concerning the formula itself. Variables are as such:
- different container types (20, 40, 40rf, 45cs, 45rf, 45)
- different weight limitations per container type (e.g. 20 container max weight 26t)
- using IF(OR(AND(....
- if any of the conditions met (e.g. 20 container < 26t ) then VLOOKUP for the rate from data based on the place name.
- if non of conditions met, then show "Overweight cargo"
I have following formula:
Why does this formula show result as "FALSE"?
If cell B56 is empty, then I need a result of "". i.e. blank result, but it shows FALSE word.
IF(LEFT(B56,2)="on",
then you go straight to the TRUE nested IFs
IF(LEFT(B56,2)="on",
IF(LEFT(B$52,3)="Pla",RIGHT(Table!AN4,2)&"% Discount",
IF(LEFT(B$52,3)="Gol",RIGHT(Table!AO4,2)&"% Discount",
IF(LEFT(B$52,3)="Sil",RIGHT(Table!AP4,2)&"% Discount",""))), "need something here" )
so to get ""
IF(LEFT(B56,2)="on",IF(LEFT(B$52,3)="Pla",RIGHT(Table!AN4,2)&"% Discount",IF(LEFT(B$52,3)="Gol",
RIGHT(Table!AO4,2)&"% Discount",IF(LEFT(B$52,3)="Sil",RIGHT(Table!AP4,2)&"% Discount",""))), "" )
I am getting 0 or 12:00 AM when I format cell as time and put formula.
I working on timesheet using this formula (=SUMIF('2'!G4,"="&TODAY(),'2'!E17)). If date in G4 on sheet2 match with todays/current date then copy data in cell E17 to sheet3(b11).
G4 = todays date
E17 = time eg. 2:25 AM ( I have to format destination cell as time because E17 has time value
Formula works fine but when there is no data in E17 or E17 is blank then my destination cell shows 12:00 AM.
I have an excel file which contains a full consolidated list of data (Master Tracker). I am now creating a new tracker and what i want to happen is for it to show the list of names from the Master Tracker which exceeded the current date "now()" and the status is still pending.
FYI: The master tracker and New tracker is different excel files Here is an example:
Master Tracker:
client
Candidate
Case Date
[Code]....
On cell K7, i have this formula:
=IF(ISERROR(I7-J7),"",I7-J7)
On cell L7 i have this formula:
=IF(ISERROR(RANK(K7,$K$7:$K$29,0)),"",(RANK(K7,$K$7:$K$29,0)))
The issue is that in cell K7 a dash (-) shows up and ranks this as the number one, even when i have no data in I7 and J7.
MTD Conv
Conv Goal
B/W Goal
RK
-
1
29.3
31
(1.70)
12
21.8
25.0
(3.20)
15