I am facing an issue related to IF formula. It does show the correct result in one and another cell, but in a few others - doesn't.
This is strange since all variables are correct, and parameters are the same for every cell. And, in theory every cell should show the right answer.
In addition, the result doesn't change even when changing variables in cells that are dependants to cell where IF is located.
Concerning the formula itself. Variables are as such:
- different container types (20, 40, 40rf, 45cs, 45rf, 45) - different weight limitations per container type (e.g. 20 container max weight 26t) - using IF(OR(AND(.... - if any of the conditions met (e.g. 20 container < 26t ) then VLOOKUP for the rate from data based on the place name. - if non of conditions met, then show "Overweight cargo"
Why is it that when I edit some cell's formulas and press enter the result is not the changed formula but the formula itself complete with the '=' sign infront of the fuormula. The work around for me is to cut the formula and paste it into a new cell then drag the old cell over the previous one I tried to edit.
Cells H1:AP1 has a range of data which each cell will either show True or False and are formula driven. Example H1 may show False but cell N1 may show True
I need to be able to hide those columns that show false using VBA.
Ive tried ISNA but I always get an error appear when i try to use it, perhaps you could edit the command above so that ISNA works whenever FALSE is the result?
I have a worksheet called "Raw Data" where in columns J, I and G contain values. I would like to write a formula whereby if all 3 conditions are met, it will count the number of values found in column C.
I've tried to write an IF statement but it just returns FALSE, despite the result being true. Need the right combination of IF/AND statements that would do this?
=IF(AND('Raw Data'!$J:$J="Maintenance",'Raw Data'!$I:$I="Open",'Raw Data'!$G:$G="1-2008"),COUNT('Raw Data'!$C:$C)). I've tried to attach the workbook, but there's a problem with uploading attachments I think. Sorry if my explanation is unclear.
I am new in Excel VBA and im trying to find a way to get back a result "True" or "False" when I have password, wich must consist of 6 letter, one upper case letter and a number must be in it. When this word consist of 6 letters and has a uppercase letter and number the result is True and this will be written into the cell next to the cell where the password is.
If I create a simple conditional statement in a cell:
=IF(A8="NX-QSNT",B8, "")
I get the expected B8 cell contents when "NX-QSNT" exists in A8, or blank when it doesn't.
If instead of qualifying this full string, I try to Search for the "-QS" string in that cell as the criteria:
=IF(SEARCH("-QS",A8),B8, "")
I get the expected B8 cell contents when "NX-QSNT" exists in A8, but I get "#VALUE!" if it does not find this "-QS" string.
I'm guessing it may be because SEARCH isn't actually returning a TRUE/FALSE response, but rather, a numeric one based on the position of "-QS". I tried using a numeric approach also, but this didn't help:
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
I have a formula in a cell which attempts to grab a value on another sheet that's dynamically changing in real-time (it's a live stock price changing in realtime via DDE). My objective is to grab this current live stock price when it is between the times of 10:30 AM and 5:00 PM, bt as *soon* as it goes past 5 PM, I want this formula cell to display the very *last* (ie.the one just before) value it had just before the time rolled over past 5 pm.
I created a simple auto numbering function whereby Cell A7 contained =Row()-6, and Cell A8 contained =(A7+1). I then shift, and pasted the contents of cell A8 until cell A600. My aim is to simply copy the increments of 1 - 600 into another column. However when i copy and paste i'm also copying the initial underlying formula ie: =( A?+1), Is there a way to copy the results, not the formula?
I already have a conditional format which is working OK. I would like to put a formula in the cell so it shows a % so currently it would be 100% as there is 3 cells below showing 3 greens.
Alternativily each colour is worth a value - Green = 1, Amber = 2, Red = 3. So Cell I3 would show 3.
I am trying to create a basic invoice spreadsheet.
On worksheet 1, I have days of the month A4 to A35. Columns B, C, D, E are headed.
Every hour of work I would enter a " 1 " in the correct cell for the day. For example, 1 hour, every segment of the day, I would enter "1" in cells Bx, Cx, Dx and Ex. This continues for the month;
On a 2nd worksheet, this is neatened up, and I have added formulas to work out the cost and type of call;
On the third worksheet, I want to display roughly the same, however when there has been no work on the day (ie the date displays "None" and the adjacent cells show: blank, blank, blank, blank, £0.00), I want it to skip the cell and display the next date which has data to show (ie a date). The data on the adjacent cells needs match with the date (in the same way as physically deleting a 'non worked' whole row).
This then on the invoice worksheet would look neat and display only the days actually worked.
Hi i have the following SUMPRODUCT formula which works as required, but when i clear the raw data and apply new raw data and apply macro that sorts my data, then all the ranges in the formula shows #REF!
I am getting 0 or 12:00 AM when I format cell as time and put formula.
I working on timesheet using this formula (=SUMIF('2'!G4,"="&TODAY(),'2'!E17)). If date in G4 on sheet2 match with todays/current date then copy data in cell E17 to sheet3(b11).
G4 = todays date E17 = time eg. 2:25 AM ( I have to format destination cell as time because E17 has time value
Formula works fine but when there is no data in E17 or E17 is blank then my destination cell shows 12:00 AM.
I have an excel file which contains a full consolidated list of data (Master Tracker). I am now creating a new tracker and what i want to happen is for it to show the list of names from the Master Tracker which exceeded the current date "now()" and the status is still pending.
FYI: The master tracker and New tracker is different excel files Here is an example:
I have created a vlookup and it shows as a formula not as data. I can do 'text to columns' to correct it, but I need to drag this vlookup to lots of different cells, then change it slightly in each one.
Every time I make a change, it reverts to the formula and I have to do 'text to columns' again.
I am linking two worksheets together. Formulas work fine except when I close the source sheet, it turnes into #REF error. I saw in one of the posts that you can not use INDIRECT formula on closed workbooks (INDIRECT is a part of the formula in my sheet) and downloaded the changingExternal. zip file as directed. Although, after staring at it for a while, I realized that I had no idea as to what was going on in there.
When I first started using excell I was relatively good at it, however a few changes were made. The main one being for excell 2002 was the collumns were not by letter. A minor problem that I managed to get past. However the next was a function issue. Before I remembered a way to total rows with a simple function like =b3*c3, which worked for the first one. Then, from that point, I could copy that formula and paste it to all of the cells in the collum in which the forumula changed for individual cells to =b4*c4, =b5*c5, etc.
My questions are simple. Is there a way that I can do this on Excell 2002 without having to do it on a cell by cell basis, and is there a way to change collumns back to letters.
I've attached the spreadsheet in which I want to figure this out on. The goal, is to total price and quantities sold into the totals section without doing it on a cell by cell basis.
I want to use the If formula but want the value if true/false to be another formula, not just a set value. Here's what I came up with (obviously wrong, please excuse my lack of experience) =IF(D2>C2,"=(D2-C2)*5","=((60-C2)+D2)*5 ")
I trying to write a conditional formula to test data in a cell to see where it falls between certain values, and depending on the data in the cell, will display a message in another cell showing what level has been attained. It's a long formula and I may not have the syntax correct. Can someone look at this and tell me where I have went wrong? All I get in the target cell is "################".
Here is the formula:
Try this formula. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas). Many more Excel Formulas =IF(c13<1600,"Not at prize level yet",IF(AND(c13>=1600,c13<=1999.99),"You have reached level 1",IF(AND(c13>1999.99,c13<=2499.99),"You have reached level 2",IF(AND(c13>2499.99,c13<=2999.99),You have reached level 3,IF(AND(c13>3000,c13<=3499.99),"You have reached level level 4",IF(c13>3500,"You have reached the top level!!"))))))
A formula I am using is outputting "0" instead of the expected value. Upon evaluating the formula I realized that this was because some of the values - years, in this case - had quotes around them while others did not. Please see the image below for the screenshot of the evaluation.
These values - the years - are being evaluated in the following formula.
Code: =SUM( IF(inventory!$F$3:$R$3=$A3, IF(inventory!$B$4:$B$56=$G$1, IF(inventory!$D$4:$D$56=$G$2, inventory!$F$4:$R$56)))) This formula references the following sheet (an excerpt from that sheet). You can also see the formulas found in the cells causing the problem.
I suspect that the problem is being caused by the output of the formula in these cells. If I simply type in "2011" instead of using the formula in B52:B56, then the first formula in the code section above does not have a problem.
I am trying to track inventory over 160 days in a spreadsheet. Every week I update a table that shows the number of skus and dollar amount that are over 160 days in a table. I have a ton of formulas that will automatically populate once I put in the new weekly data on a different spreadsheet. I want to track the weekly data so what I would really like to be able to do is paste the actual numbers and not the formulas into another excel spreadsheet so I can track the progress over time. Is there a way to just paste the actual numerical number instead of the formula itself?
I've got ALOT of parentheses, 5 nested IFs, 5 ANDs, 4 ORs. The ANDs and ORs are within the IFs.
While editing the formula, I can, at times, achieve the condition where the cell references become color-coded. Or at least some of them do. But, when I get to this point, I'm usually at a spot where I can see the formula isn't right.
I'm confused. What does it mean when my text is all red when I go to edit a formula? Did I hit some limit? Again, I don't get error messages and the formula seems to work properly.
I am working on a spreadsheet which has a column which shows square footages (Column AE) and I also have a column which shows costs (Column Y).
What I would like to do is to bracket these footages in to 6 bands (0 - 5000, 5000 - 10000, 10000 - 15000, 15000 - 20000, 20000 - 25000, 25000+) and then average the costs within a particular band.
In the estimate form I have attached, I want it to auto figure shipping by placing a X in front of shipping type. Which it is doing but how can I get it to show $0.00 instead of false when no X is placed in front.
The first being that when the first if condition is not met, it is displaying false. The formula should be set up with multiple if statements and then display 0 if all conditions are false. What am I missing? Why won't it work for all the conditions or display a 0?
Second problem is that when I try to add the last if formula to accommodate the drop down option of 60 months (5) excel is giving me an error in the formula. It doesn't matter if I type in the if statement or cut and paste. Why won't it work for this option. A sample spreadsheet is attached. The formula is cell F6 highlighted in yellow.
