Blank Cell Shows 0 Or 12:00 AM If There Is Formula
May 25, 2009
I am getting 0 or 12:00 AM when I format cell as time and put formula.
I working on timesheet using this formula (=SUMIF('2'!G4,"="&TODAY(),'2'!E17)). If date in G4 on sheet2 match with todays/current date then copy data in cell E17 to sheet3(b11).
G4 = todays date
E17 = time eg. 2:25 AM ( I have to format destination cell as time because E17 has time value
Formula works fine but when there is no data in E17 or E17 is blank then my destination cell shows 12:00 AM.
View 7 Replies
ADVERTISEMENT
Jan 3, 2008
Why is it that when I edit some cell's formulas and press enter the result is not the changed formula but the formula itself complete with the '=' sign infront of the fuormula. The work around for me is to cut the formula and paste it into a new cell then drag the old cell over the previous one I tried to edit.
View 3 Replies
View Related
Aug 7, 2008
I have created a vlookup and it shows as a formula not as data. I can do 'text to columns' to correct it, but I need to drag this vlookup to lots of different cells, then change it slightly in each one.
Every time I make a change, it reverts to the formula and I have to do 'text to columns' again.
View 9 Replies
View Related
Jun 20, 2008
When I first started using excell I was relatively good at it, however a few changes were made. The main one being for excell 2002 was the collumns were not by letter. A minor problem that I managed to get past. However the next was a function issue. Before I remembered a way to total rows with a simple function like =b3*c3, which worked for the first one. Then, from that point, I could copy that formula and paste it to all of the cells in the collum in which the forumula changed for individual cells to =b4*c4, =b5*c5, etc.
My questions are simple. Is there a way that I can do this on Excell 2002 without having to do it on a cell by cell basis, and is there a way to change collumns back to letters.
I've attached the spreadsheet in which I want to figure this out on. The goal, is to total price and quantities sold into the totals section without doing it on a cell by cell basis.
View 5 Replies
View Related
Aug 2, 2014
I am looking for an Excel macro that will Autofilter a worksheet to display all rows with a empty value in one column (e.g. column B) as well as display the entire row above the aforementioned row with a blank cell in column B. I need it to be "reversible" so that I can click the Autofilter button (or advanced filter button) to show all rows again.
View 2 Replies
View Related
Aug 2, 2014
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies
View Related
Aug 12, 2014
I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
View 5 Replies
View Related
Jul 28, 2014
My workbook is for financial planning but I'm attempting to streamline an input page (name, birthdate, etc) that will be referenced throughout the entire workbook to trigger automatic calculations (present value, education calculations, etc).
The cell in the input page is a birthdate - which when populated will trigger a cell on a different worksheet to calculate the respective age using this formula:
Code:
=IF(MONTH(TODAY())>MONTH('Input Page'!B30),YEAR(TODAY())-YEAR('Input Page'!B30), IF(AND(MONTH(TODAY())=MONTH('Input Page'!B30),DAY(TODAY())>=DAY('Input Page'!B30)),
YEAR(TODAY())-YEAR('Input Page'!B30),(YEAR(TODAY())-YEAR('Input Page'!B30))-1))
The problem is if there is nothing written in the birthdate cell then the age cell will automatically calculate 114 (reference photo below). Ideally I'd like that cell to be blank if nothing is in the birthdate cell on the input worksheet. I'm assuming since I'm using an IF formula to calculate the age already then I'll need to use a macro to to an "ignore".
[URL] ...........
View 2 Replies
View Related
May 12, 2008
got this quite complciated formula.
any of the cells specified can be blank at start of spreadsheet
is there a way to hide the DIV/0 error from appearing
this is the formula:
=((((((SUM(C11:C14)*(100%-R2)+(SUM(ThroughputFormulas!C33:C36)*R2)*(L2/30))/1000)*N2)*3600)*P2))/(SUM(C39:C45))/1024/8
View 9 Replies
View Related
Mar 5, 2009
I already have a conditional format which is working OK. I would like to put a formula in the cell so it shows a % so currently it would be 100% as there is 3 cells below showing 3 greens.
Alternativily each colour is worth a value - Green = 1, Amber = 2, Red = 3. So Cell I3 would show 3.
View 2 Replies
View Related
Jun 19, 2014
I am trying to create a basic invoice spreadsheet.
On worksheet 1, I have days of the month A4 to A35. Columns B, C, D, E are headed.
Every hour of work I would enter a " 1 " in the correct cell for the day. For example, 1 hour, every segment of the day, I would enter "1" in cells Bx, Cx, Dx and Ex. This continues for the month;
On a 2nd worksheet, this is neatened up, and I have added formulas to work out the cost and type of call;
On the third worksheet, I want to display roughly the same, however when there has been no work on the day (ie the date displays "None" and the adjacent cells show: blank, blank, blank, blank, £0.00), I want it to skip the cell and display the next date which has data to show (ie a date). The data on the adjacent cells needs match with the date (in the same way as physically deleting a 'non worked' whole row).
This then on the invoice worksheet would look neat and display only the days actually worked.
What formula(s) could I use to do this.
View 1 Replies
View Related
Oct 30, 2008
Hi i have the following SUMPRODUCT formula which works as required, but when i clear the raw data and apply new raw data and apply macro that sorts my data, then all the ranges in the formula shows #REF!
=SUMPRODUCT((Raw_Data!C6:C5000=Summary!$B10)*(Raw_Data!A6:A5000=Summary!C$8)*(Raw_Data!E6:E5000>2))
View 9 Replies
View Related
May 30, 2014
I am facing an issue related to IF formula. It does show the correct result in one and another cell, but in a few others - doesn't.
This is strange since all variables are correct, and parameters are the same for every cell. And, in theory every cell should show the right answer.
In addition, the result doesn't change even when changing variables in cells that are dependants to cell where IF is located.
Concerning the formula itself. Variables are as such:
- different container types (20, 40, 40rf, 45cs, 45rf, 45)
- different weight limitations per container type (e.g. 20 container max weight 26t)
- using IF(OR(AND(....
- if any of the conditions met (e.g. 20 container < 26t ) then VLOOKUP for the rate from data based on the place name.
- if non of conditions met, then show "Overweight cargo"
View 6 Replies
View Related
Feb 15, 2014
I have following formula:
Why does this formula show result as "FALSE"?
If cell B56 is empty, then I need a result of "". i.e. blank result, but it shows FALSE word.
IF(LEFT(B56,2)="on",
then you go straight to the TRUE nested IFs
IF(LEFT(B56,2)="on",
IF(LEFT(B$52,3)="Pla",RIGHT(Table!AN4,2)&"% Discount",
IF(LEFT(B$52,3)="Gol",RIGHT(Table!AO4,2)&"% Discount",
IF(LEFT(B$52,3)="Sil",RIGHT(Table!AP4,2)&"% Discount",""))), "need something here" )
so to get ""
IF(LEFT(B56,2)="on",IF(LEFT(B$52,3)="Pla",RIGHT(Table!AN4,2)&"% Discount",IF(LEFT(B$52,3)="Gol",
RIGHT(Table!AO4,2)&"% Discount",IF(LEFT(B$52,3)="Sil",RIGHT(Table!AP4,2)&"% Discount",""))), "" )
View 3 Replies
View Related
Sep 6, 2012
I have an excel file which contains a full consolidated list of data (Master Tracker). I am now creating a new tracker and what i want to happen is for it to show the list of names from the Master Tracker which exceeded the current date "now()" and the status is still pending.
FYI: The master tracker and New tracker is different excel files Here is an example:
Master Tracker:
client
Candidate
Case Date
[Code]....
View 5 Replies
View Related
Mar 16, 2007
On cell K7, i have this formula:
=IF(ISERROR(I7-J7),"",I7-J7)
On cell L7 i have this formula:
=IF(ISERROR(RANK(K7,$K$7:$K$29,0)),"",(RANK(K7,$K$7:$K$29,0)))
The issue is that in cell K7 a dash (-) shows up and ranks this as the number one, even when i have no data in I7 and J7.
MTD Conv
Conv Goal
B/W Goal
RK
-
1
29.3
31
(1.70)
12
21.8
25.0
(3.20)
15
View 9 Replies
View Related
Nov 30, 2007
I am linking two worksheets together. Formulas work fine except when I close the source sheet, it turnes into #REF error. I saw in one of the posts that you can not use INDIRECT formula on closed workbooks (INDIRECT is a part of the formula in my sheet) and downloaded the changingExternal. zip file as directed. Although, after staring at it for a while, I realized that I had no idea as to what was going on in there.
View 3 Replies
View Related
Jul 1, 2007
I trying to write a conditional formula to test data in a cell to see where it falls between certain values, and depending on the data in the cell, will display a message in another cell showing what level has been attained. It's a long formula and I may not have the syntax correct. Can someone look at this and tell me where I have went wrong? All I get in the target cell is "################".
Here is the formula:
Try this formula. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas). Many more Excel Formulas
=IF(c13<1600,"Not at prize level yet",IF(AND(c13>=1600,c13<=1999.99),"You have reached level 1",IF(AND(c13>1999.99,c13<=2499.99),"You have reached level 2",IF(AND(c13>2499.99,c13<=2999.99),You have reached level 3,IF(AND(c13>3000,c13<=3499.99),"You have reached level level 4",IF(c13>3500,"You have reached the top level!!"))))))
View 4 Replies
View Related
Dec 21, 2011
I'm using Excel 2010.
A formula I am using is outputting "0" instead of the expected value. Upon evaluating the formula I realized that this was because some of the values - years, in this case - had quotes around them while others did not. Please see the image below for the screenshot of the evaluation.
These values - the years - are being evaluated in the following formula.
Code:
=SUM(
IF(inventory!$F$3:$R$3=$A3,
IF(inventory!$B$4:$B$56=$G$1,
IF(inventory!$D$4:$D$56=$G$2,
inventory!$F$4:$R$56))))
This formula references the following sheet (an excerpt from that sheet). You can also see the formulas found in the cells causing the problem.
*ABC5212/20/20102010Adjustments53*20112011543/17/20112011Carwen Printers559/9/20112011Adjustments569/9/20112011Copeland Printing
Spreadsheet FormulasCellFormulaB52=IF(A52="",C52,YEAR(A52))B53=IF(A53="",C53,YEAR(A53))
B54=IF(A54="",C54,YEAR(A54))B55=IF(A55="",C55,YEAR(A55))B56=IF(A56="",C56,YEAR(A56))
I suspect that the problem is being caused by the output of the formula in these cells. If I simply type in "2011" instead of using the formula in B52:B56, then the first formula in the code section above does not have a problem.
How I can reconcile this?
View 2 Replies
View Related
Aug 13, 2013
I am trying to track inventory over 160 days in a spreadsheet. Every week I update a table that shows the number of skus and dollar amount that are over 160 days in a table. I have a ton of formulas that will automatically populate once I put in the new weekly data on a different spreadsheet. I want to track the weekly data so what I would really like to be able to do is paste the actual numbers and not the formulas into another excel spreadsheet so I can track the progress over time. Is there a way to just paste the actual numerical number instead of the formula itself?
View 2 Replies
View Related
Oct 20, 2007
But the formula seems to be working properly.
I've got ALOT of parentheses, 5 nested IFs, 5 ANDs, 4 ORs. The ANDs and ORs are within the IFs.
While editing the formula, I can, at times, achieve the condition where the cell references become color-coded. Or at least some of them do. But, when I get to this point, I'm usually at a spot where I can see the formula isn't right.
I'm confused. What does it mean when my text is all red when I go to edit a formula? Did I hit some limit? Again, I don't get error messages and the formula seems to work properly.
View 9 Replies
View Related
Nov 3, 2008
I am working on a spreadsheet which has a column which shows square footages (Column AE) and I also have a column which shows costs (Column Y).
What I would like to do is to bracket these footages in to 6 bands (0 - 5000, 5000 - 10000, 10000 - 15000, 15000 - 20000, 20000 - 25000, 25000+) and then average the costs within a particular band.
View 9 Replies
View Related
Jun 9, 2006
I have a userform where I have 2 comboboxes. The first combobox shows the the first column (only 1 of each) and the second comboBox shows me the secondary list that correlates to the valuse in the first from column B. Now I have a text box that I am trying to get the value from column C depending on what I have in the first 2 comboboxes. What is the easiest way to do it? This is all in VB since it is a UserForm, and using Vlookup seems to be too many lines if I go that route. Is there a way to use Index and Match in VB where it would be more efficient? I attached just a sample of how the data would be layed out in the Excel sheet.
View 4 Replies
View Related
Aug 14, 2014
I am looking for a way to show the character location number of a text file, possibly in the first row or a macro that I can run at any given location that will give me the location # I am currently viewing.
Currently, when I open the file I can see the character # at the opening screen (see attached file) but they disappear when it actually converts. I would like to be able to keep the character location ruler once the file is opened in Excel so I don't have to manually count.
View 1 Replies
View Related
Jan 7, 2014
Ok, basically C3 is a dollar amount. The default total for C3 is $0.00. If C3 is $0.00 then this formula cell will display a blank cell. If there is any other amount in C3 then the formula C3-C2 will run.
I tried this but it's not working:
=IF(C3="0","",C3-C2)
View 2 Replies
View Related
Jan 14, 2013
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
View 8 Replies
View Related
Jul 19, 2006
I have a spreadsheet which projects the amount of work on hand each week. It runs up to the end of the year and shows the estimated figures and then each week I input the actual figures. The way it works at the moment is that it looks at the estimated work on hand, adds the work on which has been received and then takes off the work that has been cleared...this then gives an estimated level of on hand work.
What I want it to do is to look at the cell which would show the actual work on hand and if thats empty then go on to look at the estimated work on hand. In other words - I want a formula that looks at a cell to see if there's a figure in it and if not uses another cell instead. I have tried: =If(u5=0,r5+y5-z5)
but when I input a figure into U5 it inputs FALSE into the cell. I don't want it to do that, I want it to look in cell U5 and if there's something there then do U5+Y5-Z5.....and if U5 is empty then do R5+Y5-Z5
View 4 Replies
View Related
Feb 26, 2008
I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors.
Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
View 5 Replies
View Related
Dec 24, 2013
I have a formula in cel B1 : =SUM(A2:A100) / A1
I would like to use this formula many times in the sheet, so I would need a reference to the cell the formula is in, and have the SUM range until the next empty cell one column to the left.
So I would need something like (literally):
=SUM(Offset activecell (1,-1) : Offset activecell (1, (look for next empty cell -1)) / Offset activecell (0,-1)
View 3 Replies
View Related
Feb 26, 2008
I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors. Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
View 2 Replies
View Related
