I have a list of numbers that I want to average. Problem is, some of the numbers contain zeros and i want to exclude these entries.
So, if I had a list of 6 values and 3 were zero, I'd want to sum the list and divide it by 3 (not 6).
I wanted to average selected cells excluding the value zero. Also, I wanted to make the value of cell is zero and not to display the error #DIV/0! if the denominator is zero.
A1 = Denominator
Selected cell:
A3, A5, A6, A8
For taking out zeros i am using =sum( : )/(sumproduct(( : <>0)*1))
im trying to use {=average(if( : ="1962", : ))} for each year in date column G and average data in column N.
How would i put this together?
Average each year starting with 1962 without counting zeros.
*attached is the file example
I have three attendance columns M:O which will contain the number of viisits per month. I am averaging these columns in column P. I am using the following formula to calculate the averages of three columns using Windows XP and Excel 2003.
=IF(ISERROR(AVERAGE(IF(M5:O50,M5:O5))),"",AVERAGE(IF(M5:O50,M5:O5)))
The formula works fine as I initially started to remove the error message from the zero values. My problem started when I created a conditional format to color the entire row yellow, based upon the formula in column A
=IF(ISERROR(IF(P24
I have pivot table that is pulling data from a page that is using the vlookup formula. I would like the table to only include fields that have data in the count. However, the pivot table is registering cells that have "0" (i.e., there's no actual data in the cell it is pull from) as having data. How can I get the pivot table count to ignore these cells?
View 1 Replies View RelatedHow can I copy a range and paste it excluding the lines with a zero value. The sample attached explains it better.
View 6 Replies View Relatedim trying to average over a number of work sheets to determine the avergage talk time of employees over a day, ive tried:
View 14 Replies View RelatedI current have an Excel doc that I am trying to pull averages from. Every row has data that needs to be averaged but I only need every other cell. And I cannot have zeros in the average because it will skew the data. Also if the average for a row ends up being 0, I want that average to show up as 0 not #DIV/0!. From Column H to EE I need to average each row individually.
I came up with the below formula.
=IF(SUM(H1:H1:J1:J1:L1:L1)=0, "0", AVERAGEIF(H1:H1:J1:J1:L1:L1, ">0")
It works but Its not practical because I have to manually enter all of the cells that it pulls from.
How to get the small value excluding zeros?
small(Convention!$I$3:$I$1000,rows(Dashboard!$D$41:$D41))
I have a one column of numbers...let's say consisting of six rows
the following numbers 12,0,14,25,0,9
if I average this it comes out to 10
how can I average the same rows but exclude the zeros in the outcome(is there a formula to do that?)
I would like the answer to be 15.....I still need the zero's in the rows however
I have a column with values, say column a. In column a are several rows with values equal to zero. I would now like to create a new list that omits the values that are zero, e.g.:
original list:
23
0
54
76
0
0
new list:
23
54
76
I have inherited some legacy templates (Standard, Leave and Exception) which cannot be changed. I need to summarise them (Total) selecting the earliest start and the latest finish. (Sample attached). The templates are 90 columns wide and about fifty lines deep so named ranges isn't practicle (I think). I'm running 2003.
View 4 Replies View RelatedIm trying to filter a name range of 12 columns in vba. However im able to emit ZEROS but NOT blanks when i usse AutoFilter Field:=12, Criteria1:="0" it stil contains some blanks in the filtered data
View 1 Replies View RelatedI have the following formula which works perfectly unless one of the cells has a value of zero;
=MIN(SUM(AD13),MIN(SUM(AK13)))
When AD13 = £60.00 and AK13 = £94.00 (or vice versa) the formula returns £60.00, which is correct. BUT when AK13 = £0.00 obviously the formula returns £0.00, but I would like the formula to still return £60.00.
How this can be done?
with the data in the attached sheet, I create several different pivot tables that need show the count of the information in the columns M:DU. My issue is that the data is sent to me from a third party and the columns contain zeros that cause the counts to inflate.
What I would like to be able to do is run a macro that will search out any zeros in M:DU and replace them with a blank cell.
Unfortunately the number of rows increases with every monthly reporting cycle so the macro would need to be able to accommodate for that.
I’ve created a formula for this statistic and I’m happy with the results. Because I’m working with formulas, my only problem is the unwanted zeros. How do I hide zeros that show up automatically (i.e. #3 [blank] and Nov 09-June 10)? I can hide the numbers, but if I enter a zero to one of my future statistics it will not appear and I don’t want that to happen. Is there a way to hide those automatic zeros without affecting my real zeros?
Vendor’s Name
Jul 09
Aug 09
Sep 09
Oct 09
Nov 09
Dec 09
Jan 10
Feb 10
Mar 10
Apr 10
May 10
June 10
1
Vendor1
20
5
15
3
0
0
0
0
How can I do an average in Excel 2003 when it's not a range but I also don't want to count a certain cell when there's no data or zero? I have attached the spreadsheet.
View 6 Replies View RelatedI'm trying to average data for the past 3 years. My spreadsheet is setup like this.
Year, NameID, Salary, Average Salary
I have the spreadsheet sorted by NameID so most people in the database will have 3 entries right after another. How do I determine an average salary for the person across all 3 years?
I need the average salary to display across from the most recent date if that is possible as well i.e. if the latest salary date is from 2006, I would prefer that is entered into the row corresponding to 2006 and leave the 2004/2005 rows blank.
Also, some people might only have 2 years of data so keep that in mind as well.
Column A has approximately 50,000 rows with unique property parcel numbers. Column B has numbers that represent an elevation point on the parcel. The parcels are not level. The elevation of a parcel varies depending where one measures. So,...I have many rows with the same parcel number in column A but the adjacent column B shows a different elevation. Is there any way to:
1) remove all of the duplicate column A parcel number rows so I have just one column A parcel number row.
2) get the average of all the column B elevations to show up on the same one row?
I should only have approximately 15,000 rows if I could get rid of the duplicates and get the average elevation. I have version 2007 but I have to share with others who have version 2003. I don't know if that makes a difference but I thought I should mention it
I have received a task to do for school and I tried my heart out but I can't seem to figure this out. It's really simple but I can't seem to do it... I'm not very good with excel.
The excel file is attached .....
I have a spread sheet and it has a column in it with a drop down menu. The words in the menu are Hot, Medium and Cold. I want to have it tell me which one if showing up the most.
View 13 Replies View RelatedThe organisation I wish to report on has many cost centres which each contain many people. These people are on many different grades, and each are on differing salaries (even those in the same grade).
One “reporting group” has many cost centres.
There are several reporting groups.
I need to report on average salary per grade / per reporting group.
I have attached some dummy data. The “rep group” tab displays the reporting groups and the cost centre mappings (ie reporting group England contains cost centres 1, 2, 3, 4, 5, 6 and 7). Note in reality the cost centres are not this simple, they are 6 digits and varying ranges.
In the “salaries” sheet each individual is listed along with their cost centre (in column c) and their grade (column d). Their salary is shown in E.
I have a column of data in Excel in the [h].mm.ss format. These values range from a few minutes to hundreds of hours. I need to get the average of these times.
My code is below. I'm getting a type mismatch error on the line that tries to add the time to the total. The line is in red. I've tried using a Integer, Long, Double, and Date as variable types for this particular variable. All with the same result.
I am attempting to find the average units of the last "n" weeks. I wish to input the required number of weeks in cell D20 which will show the average in cell D22. In this particular example, I have manually calculated using the average formula....
View 9 Replies View RelatedI need some help with a formula. I've tried daverage, cant seem to get it to work. below is an example of the spreadsheet.
A B C D E
Date Name Project Score Pass?
5/1 Joe Test 55% No
5/1 Jan Quiz 88% Yes
5/4 Jon Test 100% Yes
5/9 Gary Test 75% Yes
5/11 Joe Quiz 90% Yes
5/18 Mary Test 45% No
Ok, I need a formula that I can execute from a different worksheet than the data is on. I need the formula to give me the average of the scores in column D for the criteria in Column C "Test". I tried daverage=(A1:E7, "Project", C1:C2) I cant get it to work. Do you guys know any other way to do this?
in Sheet1, i have 'part number' listed in column A and 'customer number' in column H. in column P, i have 'customer price' (for that part). so there are multiples of the same part numbers listed in column A.
in Sheet2, i have a summary showing totals for the parts (regardless of the customer), which includes SUMIFs for other columns such as pieces sold, etc. what i am looking to do is get the 'customer price' average by part (in column P/worksheet1) for each part on Sheet2.
Sheet1 sample:
Column A / Column H / Column P
31397 / 1001240 / $6.60
31397 / 1020312 / $6.65
31397 / 40020 / $6.63
31832 / 1047493 / $4.22
31832 / 1035195 / $4.22
31832 / 40017 / $4.40
So for Sheet2 i would like it to be like:
Column A / Column B
31397 / $6.6267
31832 / $4.28
i also need this formula to work if column P has any cells with zero entered.
I'm making up a list of average scores across a season. I have an average column and I need to be able to deduct 10% from this average, then have excel ignore any scores below this new number and make up a new average (kinda like a handicap score).
I have columns for average (BD), 10% of this (BE) "ignore any score lower than"(BF) but Im not sure how to get excel to add up only the scores below the number in BF and make a new average column of only these in BG -
Last column would be to give each person a classification based on cutoffs (for instance 1-10=C Class, 11-20=B Class, 21-30=A Class etc etc). Is there a way to make "if BF=xxxx, make BH A, B, C etc?
I need to average out a set of numbers but the amount of numbers inputed will vary, these number can also be either positive numbers or negative numbers but will never be 0.
How do i do this and I would like this in formula terms?
Say cells a3,b3,c3 were the numbers that I want averaged but there is not always a number inputted in each of these cells. I want the answer to show up in cell a4
i've got a worksheet with 3 columns each declared, called date, place and avspeed
I'm trying to average the avspeed if it falls under certain criteria within the other 2 columns.
The dates are in day format and basically I require the average over the week
If tried using
=AVERAGE(IF(WEEKNUM(date)=45,IF(local=I4,avspeed)))
also declaring it as an array formula but both
also tried the following by summing and then counting the data and dividing one by the other, but so far neither are working
Trying to compute annual change I've always used the formula "(b1-a1)/a1" - where b1 is the current year, a1 is the prior year. I've been asked to compute average annual change over a number of years and thought simply by using the above for each year and then taking the average of all these, I'd be ok. I recently found a formula as follows: "(y2/y1)^(1/n)-1", where y2 is current year, y1 is 1st year I have data, n = the number of changes.
View 7 Replies View Related