I wanted to average selected cells excluding the value zero. Also, I wanted to make the value of cell is zero and not to display the error #DIV/0! if the denominator is zero.
A1 = Denominator
Selected cell:
A3, A5, A6, A8
I have a list of numbers that I want to average. Problem is, some of the numbers contain zeros and i want to exclude these entries.
So, if I had a list of 6 values and 3 were zero, I'd want to sum the list and divide it by 3 (not 6).
I want to average cells in different columns which meet a minimum criteria, i.e. > 2.0, from specified categories list in the first column. Example: I want to select a category listed in column A and average the numbers listed in columns C and F for that category which meet a minimum threshold.
View 9 Replies View RelatedI have done alot of research in the formula realm but haven't ventured into the VBA coding side of the house due to the inexperience. I'm having issues w/ a particular calculation and hoping you all can help me out.
I hope I can explain this well.
- I have a total of 31 sheets (1-31)
- In each sheet there is a series of number (B16:L16)
- I want to take the average of all these numbers
I'm able to get the average of each sheet then take the average of those but that is not what I'm trying to do because of the following problem.
Let say in sheet1 that 5 cells are filled from the series (B16:L16) but on sheet2 there is only 1 cell filled and on sheet15 there are 10 of the 11 cells filled.
When you take the average of each sheet than average that it will not come out with the correct calculation. I'm trying to average ALL numbers combined from Sheet1 to 31 from cells B16:L16.
How can I do this. I have tried several solutions but nothing working properly. This is the one I have tried but doesn't work properly:
{=AVERAGE(If(ISNUMBER( '[Jul06AMEFVER.xls]1'!$B$15:$L$15),ABS('[Jul06AMEFVER.xls]1'!$B$15:$L$15)))}
However when I try to ":31" after the 1 it will not provide the correct value. Not sure where to go with this.
I have a row of dates going across in row 2, and random values going across in row 3 from D3 onwards. I want to return the average of values in row 3 until the third last non-blank cell in row 2 and do a similar thing for maximum row but just for the last 30 cells from the right (so latest 30 days). I have attached screenshot of part of spreadsheet for better illustration.
Capture.PNG
In my macro I can come up with a range for both, as below. Both lines of macro below select the correct range I am looking for.
[Code] .....
However when I try to apply them into an average/maximum function they returned an error 1004, Application defined or object define error:
[Code] .....
When I put it as following it returned me the value of Cells (3, 4) (Cell D3) instead of the average:
[Code] .....
Attached File : Capture.PNG‎
I was trying to sum/average last values in a range. If the range is updated, it should sum/average the last 5.
Tried to do it myself but succeded to do my head in only.
I am using this code to hide or unhide rows of text on another sheet:
VB:
Sub ProcessSheet1ChangeOnCellJ7(ByVal Target As Range)
Dim sAddress As String
Dim sValue As String
'Get the address of the cell that changed without '$' signs
sAddress = Target.Address(False, False)
[Code]....
When the "Not Pursuing" list box option is selected (in cell "J7" or "J8" in Sheet 1) I need to add (or over-write) "Not Pursuing" to the range of cells in column "B" (in the "Tasks" sheet), but only for that particular Goal, meaning a limited range of cells in column "B". If the "Pursuing - Show All Tasks" option is selected for a Goal then these same cells need to be blank so that the appropriate person can enter their name into the cell.
The purpose for adding "Not Pursuing" automatically to these yellow highlighted cells is that it will facilitate filtering of tasks by individual in the "Tasks" sheet..
Again I have tried several times to upload a sample file and am unable to, which I know makes it more difficult to solve. (Is there some common mistake people make? I know it's an allowed format and is very small in file size....)
Code solution can be entered directly beneath:
VB:
If Target.Value = "Not Pursuing" Then
ActiveWorkbook.Sheets("Tasks").Rows("29:29").EntireRow.Hidden = False
ActiveWorkbook.Sheets("Tasks").Rows("30:48").EntireRow.Hidden = True
What I want to do is Average out a range of cells "F4:F343". That's the easy part =average(F4:F343). However I want to exclude any numbers for that average if data in coloumn "Q" = "FMC"
Would that look anything like:
=average(F4:F343)/countif(Q4:Q343, "<>FMC")
I'm also displaying it as minutes in a day so i added *24*60 to the end of the formula and formatted to Number/.00. I've entered the formula and it will calculate but when i enter FMC to the appropriate area the average wont change.
I am having difficulty trying to solution this:
Row 1 = Dates e.g. 1-Mar - 31-Mar
Row 2 = Day of Week e.g 1-Mar(B1) = Sat(B2) through 31-Mar ending at (AF)
Column A has hourly time intervals
A3 = 0:00
A4 = 1:00 etc to 23:00
Numbers fall into cells by date/day and interval up to today 10-Mar
What I am trying to do at is average the days separated by Weekdays and weekends..so the formula at AG for interval for weekday would be =AVERAGE(D3:H3,K3:O3,R3:V3,Y3:AC3,AF3) weekends (Column AH)would be =AVERAGE(B3:C3,I3:J3,P3:Q3,W3:X3,AD3:AE3)
I want to average the weekdays and weekend numbers without having to group the weekdays and weekends in a custom sort in the final column. That way when I add the data every day, it auto calculates in AG and AH. If I do it as it shows above, the AVG is skewed due to the blank cells.
Attached a sample worksheet.
I have data for 500 companies over 10 years, in three criterions: “EPS”, “DPS” & “PX” (i.e. earnings, dividends and price).
For each company I have four lines recording the data, and given a letter code indicating how the change in dividends and earnings have been according to the following
(Examples)
DD-ED = Dividends Decreased & Earnings Decreased
ND-EI = No Dividends & Earnings Increased
As can be seen below this code is present for each company
What I need help with is some sort of lookup function which takes the average of the price changes (which is given in numerical values) only for the companies which code is equal to the code in the reference field.
So something like: =AVERAGE(IF((MOD(ROW(D2:D2353)-ROW(D2)+1,5))=0,IF(D2:D2353"",D2:D2353))) (currently counting every 5th line, since there is 4 lines between respectively PX/DPS/EPS for each company) –But with a constraint indicating only to include the value in the calculation if the codes are the same (e.g. "DI-EI" = "DI-EI").
So that the value, which is currently 20.96% (which now includes ALL price values), would only include those for the respective group (in this case, companies in the DE-EI group).
I have three columns that i've called 'active period' and 'Date/time' and 'value'
The the value of the cells in the 'active period' column depend on the value and time.
I want to create a cell that; when i can enter a date, this date will be excluded from the 'active period' column
I need to calculate the average spend on a day of the week over the month, so all Monday's or all Tuesday's, etc. One sheet is one week so I need to average b16 on 6 sheets as an example.
I used =AVERAGE('WEEK1:WEEK6'!B18) to calculate average over the six Monday's. The issue is, as in other posts, how do I ignore the cells that have a zero or null value.
I've tried adjusting this which was in 1 post
=AVERAGE(IF($C$2:$CA$2=C62,IF($C$25:$CA$25"",$C$25:$CA$25
with this
=AVERAGE(IF(1+1=2,IF('WEEK1:WEEK6 '!B180,'WEEK1:WEEK6 '!B18))) which returns #REF!
this from another post
=SUM('WEEK1:WEEK7 '!B18)/COUNTIF('WEEK1:WEEK7 '!B18,"0") which returns #VALUE!
and this
=AVERAGE(IF('WEEK1:WEEK7 '!B180,'WEEK1:WEEK7 '!B18)) which returns #NAME?
The cells on each sheet are sum formulas for other cells on the sheet not just numbers on their own.
Using windows 7, excel 2003
I can find the min value excluding zero in a range of contiguous cells, but how can I do it if the cells are A1, A3, A25, A67, etc?
View 9 Replies View RelatedI want to sum a range of cells that are referencing another spreadsheet using a vlookup function, eg:
#N/A
#N/A
#N/A
51
78
73
i dont want to delete the formulas that are returning the #N/A but i want to be able to sum only the numeric values from the six cells.
I am trying to calculate an average of 800 cells, where I would like to exclude a cell when a certain character is in it, namely "<".
View 4 Replies View RelatedI need to calculate ratings 1-5 of questions on client surveys received.
I have recurring sets of data, A1:E1, a number 1-5 is to be entered into one of the cells within this range. This same pattern is repeated 25 times....G1:L1, etc. At the end I need to total all the 1s, 2s, 3s, etc. Then I need to calculate an overall pct for each question based on the totals for that question, divided by the maximum score (5) multiplied by the total surveys received. The problem I am having is that my formula below is counting empty cells, and not giving me a proper pct.
=SUMIF(A1:E1,">0")/(5*$B$1)
I have tried a number of different ones from my search of this forum but I'm getting an error. here is a sample of my spreadsheet.
I want it to give me the lowest number, I don't want it to look at the 0's or if the cell is blank.
Here is my formula and my error:
=SMALL(N196:N203,COUNTIF($N$196:$N$203,0)+1)
my error is #num!
I've also tried others including using the MIN function but either 0 is entered or the error above.
3402414
conditional formatting. I am using the code below to conditional format every Odd row with a background/border.
=MOD(ROW(),2)=1
I would like to know how to modify this, so that it only applies the format if the cell in column A on that specific row contain data and doesn't format blank cells.
I'd like to calculate the standard deviation and mean of a whole load of data. Unfortunately it has some errors, FALSE values, blank cells and zeroes I'd like to exclude. Calculating the average is no problem as the AVERAGEIF function works fine, but there is no equivalent for STDEV. The (array) formula
STDEV(IFERROR(E29:E32,FALSE))
ignores the cells with errors and calculates the SD, and the (array) formula
STDEV(IF(E29:E32>0,E29:E32,FALSE))
ignores the cells with a value of 0 in them and calculates SD.
How can I combine the two into one formula?
I have two lists of data as below, and I want to find a match after excluding "Ltd" or "Limited"
example
If Cell A1 is "ABC Limited", and Cell B1 is "ABC Ltd"
This should show as a "match", otherwise it should show error.
I am currently working on a football spreadsheet ranking players based on their fitness performance scores. For example, there are 14 persons on Offensive Line. I need all their test scores ranked out of 14. However, if there is a blank, I still need the test scores to be ranked out of 14.
As of right now, I have cheated, and inputted a random number to bypass the blank:
=IF($G12>10, 0,RANK($G12, $G$12:$G$25,0))
But, this now affects my average of the fitness testing scores for that position. This could be avoided if I could find a way around my first problem.
I am applying the sum function to a range of cells in a column. I've Auto Filtered my sheet to only include the data I need. Unfortunately, the sum function is adding everything in that column, even data from the 'hidden' cells that I've filtered out. I need to know what condition or parameter to apply to the sum function (or any other function for that matter), that will only add the data shown on my screen. Not the data that is hidden.
View 2 Replies View RelatedIs there a function that will count a column of numbers where that will eliminate counting empty cells based on a certain date that will also capture any numbers that is added after refreshing the table from Access? I have attached a spreadsheet for an example. I need to count on the number in column V that equals 13 for the date of 12/22/09.
View 5 Replies View RelatedFirst I will post the data:
Weekly Roster
F98AKHTAR99DEEPAK100NAPA'A101OUKASH102ROBINSON103RUSSELL104SALUNI105S
PARTIATIS106SPICE107TAN108TORRES. Jr109VAN STEEN110ACCIARITO111112113114115116117118119120
In this data, as you can see there are a lot of cells/rows that are empty. I have a macro that will copy the cells F98:F120 to F99:F121 and then copy F121 to F98, and finally delete the value from F121. In this case, it will give me a blank cell at the top and the data hasn't rotated really. All the names will be in same position.
But I DON'T want that. I want the macro to look for the last cell/row with a valid value in it and rotate the cells so that I end up having ACCIARITO at the top and everybody else to move down one row.
I have the following formula which works perfectly unless one of the cells has a value of zero;
=MIN(SUM(AD13),MIN(SUM(AK13)))
When AD13 = £60.00 and AK13 = £94.00 (or vice versa) the formula returns £60.00, which is correct. BUT when AK13 = £0.00 obviously the formula returns £0.00, but I would like the formula to still return £60.00.
How this can be done?
I have a worksheet where I capture the date and time of each new entry in column A.
In the next column, it's counting up the number of hours since that entry was made. However, it's including Saturdays and Sundays in this count and I was wondering if there's a formula to calculate the number of hours excluding Saturdays and Sundays? I know that network days would count the number of working days from one date to the next, but really need hours. Is this possible?
I have the following code from a form. It works just fine copying named ranges from one sheet to another. The probloem now is that I don't want to copy the characteristic of the formating or whether they are protected or not. The originating spreadsheets have cells that are protected. I am trying to copy those values over to the new sheet and paste their values or formulas but not their formatting (background color) or the fact that some of the cells are 'locked'. I want the new sheet to have the values and formulas but not the be lock for the user. Is this possible with the current way I do the code or do I have to rewrite it? How would you approach this?
Private Sub CommandButton1_Click()
Import_Data_Form.Hide
Run "NPA"
Set b = Selection
ad = b.Address
' Local Variables
Dim wkbDataFile As Workbook
' Let user select source datafile
Call UserSelectFile_WOpen(wkbDataFile)
If wkbDataFile Is Nothing Then
MsgBox "User did not select a workbook to open"
Exit Sub
End If
Application. ScreenUpdating = False
Set wb = ThisWorkbook
Application.DisplayAlerts = False
I need to protect my worksheet and only allow users to edit certain ranges. I am allowing the use of autofilter which I can select when I apply protection. However, I am now aware I cannot sort protected cells..which is essential. I basically need to be able to sort a column titled 'surname'. The worksheet is a record of pupils attainment in my class.
Now, I have a macro which seems to do the job: ....
Trying to put together a macro that looks down active sheet for all cells that contain a value, sets a print area and then prints !
Is this possible?
FYG, I have a column that run from 3 - 2000, which contains a formula, which may produce a value depending on corresponding cells.
I used this code from a post on a similar topic, but excel is complaining code
in bold
Private Sub Print_Area_Click()
Dim lastCell As Range
Set lastCell = Cells.SpecialCells(xlCellTypeLastCell).Offset(1, 0)
Do Until Application.Count(lastCell.EntireRow) 0
Set lastCell = lastCell.Offset(-1, 0)
Loop
ActiveSheet.PageSetup.PrintArea = Range(Cells(1, 1), lastCell).Address
End Sub
1 workbook, 2 worksheets (or tabs). On tab 1, I want a formula/alert that tells the user if any duplicate values exist in Column A of tab 2
Tab 2, Column A, has Unique ID's (6 digit numeric values)
The user manually inputs the ID's on new rows in Column A
Row 1 is reserved and in use for something else
Row 2 is my header, so cell A2 says "ID"
Row 3-623 currently contain unique ID's
When the user inputs a new ID into cell A624, then they return to Tab 1, I want my formula/alert on Tab 1 to tell the user that they have duplicates in Column A of tab 2. I know the Conditional Formatting, but if the user copies in 100 new values, they won't necessarily see the highlighted cells. My tab 1 is my "checks and balances" and the last place the user is suppposed to look to ensure that they haven't created any duplicate ID's. If the user sees a warning message that says duplicates exist, then I'll tell them that they need to look at column A (for cells that have been conditionally highlighted).
One issue that I'm running into with the conditional highlighting is that I want cells A3:A1048576 to already have the conditional formatting - this way when the user inserts a value into Cell A624, then A625, etc they conditional formatting is already there. Right now with data in cells A3:A623, cells A624:A1048576 are all highlighted with the Red/Bold Red Font (which is okay I guess), but ideally it would be nice to not count 2+ empty cells as duplicates and I'll have to have my formula on Tab 1 not include the blank cells.
I DO NOT want to use the Remove Duplicates feature of Excel 2010. If I remove them I could be removing data in columns B, C, D, etc that belong to the Unique ID. I just need the user to be told in Tab 1 that they DO have duplicates and I'll train the user how to research this and fix it.
The reason I want to look for duplicates in the entire Column A is because the list of Unique ID's will grow over time.