I have pivot table that is pulling data from a page that is using the vlookup formula. I would like the table to only include fields that have data in the count. However, the pivot table is registering cells that have "0" (i.e., there's no actual data in the cell it is pull from) as having data. How can I get the pivot table count to ignore these cells?
View 1 Replies
I have a list of numbers that I want to average. Problem is, some of the numbers contain zeros and i want to exclude these entries.
So, if I had a list of 6 values and 3 were zero, I'd want to sum the list and divide it by 3 (not 6).
How can I copy a range and paste it excluding the lines with a zero value. The sample attached explains it better.
View 6 Replies View Relatedim trying to average over a number of work sheets to determine the avergage talk time of employees over a day, ive tried:
View 14 Replies View RelatedI current have an Excel doc that I am trying to pull averages from. Every row has data that needs to be averaged but I only need every other cell. And I cannot have zeros in the average because it will skew the data. Also if the average for a row ends up being 0, I want that average to show up as 0 not #DIV/0!. From Column H to EE I need to average each row individually.
I came up with the below formula.
=IF(SUM(H1:H1:J1:J1:L1:L1)=0, "0", AVERAGEIF(H1:H1:J1:J1:L1:L1, ">0")
It works but Its not practical because I have to manually enter all of the cells that it pulls from.
How to get the small value excluding zeros?
small(Convention!$I$3:$I$1000,rows(Dashboard!$D$41:$D41))
I have a one column of numbers...let's say consisting of six rows
the following numbers 12,0,14,25,0,9
if I average this it comes out to 10
how can I average the same rows but exclude the zeros in the outcome(is there a formula to do that?)
I would like the answer to be 15.....I still need the zero's in the rows however
I have a column with values, say column a. In column a are several rows with values equal to zero. I would now like to create a new list that omits the values that are zero, e.g.:
original list:
23
0
54
76
0
0
new list:
23
54
76
I have inherited some legacy templates (Standard, Leave and Exception) which cannot be changed. I need to summarise them (Total) selecting the earliest start and the latest finish. (Sample attached). The templates are 90 columns wide and about fifty lines deep so named ranges isn't practicle (I think). I'm running 2003.
View 4 Replies View RelatedIm trying to filter a name range of 12 columns in vba. However im able to emit ZEROS but NOT blanks when i usse AutoFilter Field:=12, Criteria1:="0" it stil contains some blanks in the filtered data
View 1 Replies View RelatedI have the following formula which works perfectly unless one of the cells has a value of zero;
=MIN(SUM(AD13),MIN(SUM(AK13)))
When AD13 = £60.00 and AK13 = £94.00 (or vice versa) the formula returns £60.00, which is correct. BUT when AK13 = £0.00 obviously the formula returns £0.00, but I would like the formula to still return £60.00.
How this can be done?
I am trying to come up with a formula that will count everything excluding 1 in one row, while looking at another row to determine the group.
The attached example explains things a lot better.
I am going to have 2 formulas. 1 for the "Big" group and one for the "Small" The formula needs to look first at the column that has the group in it. Then it needs to count everything is column A excluding "Snake" And return the value.
I am trying to count data using several criteria
1.Need to add data from for a certain category, say "blue" + data during a certain date but exclue the ones with zeros
My formula using arrays look like this, but it is still counting data with zero in the cell as an item
=count(if(A4:A400(text by category)=”blue”,count(if(O4:O400(date)<”04/01/07”,count(An4:An400)[Actual data],-(countif(An4:An400,0))))))
I have a COUNTA function that I'm using. However, I want to exclude "N/A" from my count, what is the function that I need to use to do that.
Currently I have =COUNTA($C$10:$C$122). How do I modify this formula so it doesn't include "N/A" in my count.
how to count days excluding only sundays in a calender period.
"weekdays" excludes both saturdays and sundays.
Have several rows
Some have data some do not
Some rows are hidden (Hidden rows also may or may not have data)
I wish to only count how many rows are not hidden.
I have a holiday and sickness chart for all of the guys in my maintenance department for the whole of next year (2014). The holidays part works fine. The sickness is split into two areas; the number of occurrences of sickness and the total number of days sick. To make the formula work for the number of occurrences it is necessary to enter sick in both Sat and Sun if the sickness spans the weekend. But we do not work the weekend and so I do not want to count those two days. The formula needs to cover the entire year (cells BL5:ZL5). The calculation that I am currently using is =COUNTIF(BL5:ZL5,"Sick")/2 (divided by two as we log a.m. and p.m. and the answer is in days). In the example attached, it would be 1 occurrence of sickness and 3 days sick, not 4 as shown.
For completeness, the formula that I am using for the occurrences is =SUMPRODUCT((BL5:ZL5="Sick")*(BL5:ZL5<>BK5:ZK5))
I have a list of courses that are run each month, I have a formula that counts the occurrences of these words to show how many times each course is run per month.
However, there are 'other' courses that will be run adhoc which I want to count the occurrences of. It basically needs to count if there is text there but exclude the normal courses which are run.
I have attached a spread sheet as an example, the list of the normal courses are on the right. I've highlighted in yellow where I need the formula.
I have a list of invoices numbers in column B, some are duplicated
I want to count the the number of invoices excluding duplicates.
I need to count a column of text excluding duplicates, but only if they are duplicates of the cell directly above them in the column. Example:
a
b
c
c
d
d
a
b
I want this to return 6 instead of 4. Is this possible?
I want to count the number of cells in column C with one forumla that answers the question, "How many of the cells in column C contain the words, APM, BPPM, CAPM, and NMS while exluding any results that have "OUTLOOK" in Column K?
View 2 Replies View RelatedI was wondering if was possible to create a conditional calculation excluding hidden columns.
For example in C4:HA4 the cells may have a number of values L, S, U etc.
When a user access the spreadsheet certain columns a hidden based on comparing their PC user ID to an access list in the workbook.
What I would like to be able to do would be to count the instances of L in C4:HA4 but exluding the hidden columns.
I'd hoped I might be able to use SUBTOTAL in a similar way to Domenic came up with here:
=SUMPRODUCT(SUBTOTAL(9,OFFSET(C2:C100,ROW(C2:C100)-ROW(C2),0,1)),--(C2:C100
I am trying to set up a sick leave list which will work out the cumulative total for the last 12 months (from last day of last sick entry). The problem I have, as the is is added to, I need a function/formula to work out 12 months from last date and then add up the no. of sick days from then to the last date. Hope this is clear. The next problem is I need it to work out total days and then without weekends. Below is the chart I have to work out.
Column 1 Start date of sickness
column 2 End date
Column 3 the number of days sick in period (column 2 less column 1 in days)
column 4 the number of days sick in period above excluding week ends (column
2 less column 1, less weekends in days)
column 5 total sick days in last 12 months from date in column 2 going back
a year including weekends
column 6 total sick days in last 12 months from date in column 2 going back
a year excluding weekends
What function or formulas can I use to calculate column 3,4,5 & 6. I am a not very experienecd in Excel
Formula to count the number of consecutive zero starting from the last cell with non zero value.
View 14 Replies View RelatedIs there a function that will count a column of numbers where that will eliminate counting empty cells based on a certain date that will also capture any numbers that is added after refreshing the table from Access? I have attached a spreadsheet for an example. I need to count on the number in column V that equals 13 for the date of 12/22/09.
View 5 Replies View RelatedI have the below table of data and what I am looking for is a formula that will count the number for unique numbers (col E) depending on a several criteria. So far I have got this formula but it's not working!
=IFERROR((SUMPRODUCT(--(A3="2014"),--(B3="1"),--(D3="Boc Limited"),)),"")
A
B
C
D
E
year
week
smsupplier_code
supplier name
orders_no
[code].....
I need to count how many times a set of numbers go past zero, ie. change their sign. they almost never hit zero directly, so i cannot just count "0". example below.
0.345
0.678
1.234
2.567
1.4
0.2
-0.34
-0.456
-0.01
0.356
1.890 etc
In this example there would be just 2 sign changes, where the values pass zero (marked red). So i just need a formula that returns the result "2".
I need to do this for about 20,000 rows of data, all in one column
I need a formula to count the zero's from a column and to put the value next to the 1 and when another 1 appears after a 1, it has to show 0, like in the example bellow.
example1.xlsx
Count all zero(0) in the row except those that belong to column "Friday" :
Friday
17
18
19
20
21
22
Friday
24
25
26
27
28
29
[Code] ........
I am trying to make a excell spread sheet that will calculate my students averages for the year. I need to account for zeros in the coarse and I want this excel sheet to track the current average all year long . So I do not need to include my blanks in the average as I go. Also , how do I formulate my average accum to show this formula - Test scores, four of them count as 80% of the total grade. So each test is worth 20% / Lab 10% of total grade and homework is additional 10%. I downloaded the templete from MSN and have tweaked it to my liking except for the coding above. Please advise. I am a below par on Excel. My attachemtn is below of my templete. One note. the templete gave me the room to include 13 ros of homework - but I will not necessarily use all of them... I can make it one row for home work only ....
View 9 Replies View Related
