Blank Cell Next To Overlapping Cell?
Mar 31, 2012I wanted to see if there was a way to keep an empty cell blank when the cell next to it is overlapping. I know I can wrap the box but I'd prefer to keep all the cells one width.
View 3 Replies
ADVERTISEMENT
Cell Overlapping
Apr 2, 2008One of my customers has a worksheet where he enters [alot] of text into cells. As if they were all word documents. Ok, well, not that much text. In either aspect, the cells are supposed to overlap into the next cell, if it's empty. Which it is. Only it isn't overlapping at all. It's still cropping as if there was some value/data/formulae/anything in that adjacent cell. I'm not sure why. We've deleted the cells in question (Both the ones we were enterring data into, and the ones that were supposedly empty) and re-inserted blank cells, and it still does not work.
Is this a glitch, or is there some work-around or fix for it? Or is it a setting and we're just special?
Data Not Overlapping Next Cell
Oct 17, 2006This is probably a simple fix, but I cannot figure out why some of my data will overlap over the next cell if it is bigger than the cell width and then some will not, I just get ###### error. There is nothing in the next cell. I don't want to increase the cell size because that would mess up the rest of my page format. I've also tried to merge two cells together, but then it causes an error in my macro, even though the cell name is the same.
View 2 Replies View RelatedOverlapping Cells Prevent From Using Just One Cell?
Jun 25, 2013How can I stop the overlapping cells?
View 2 Replies View RelatedMaking A Cell Blank Referring To Another Blank Cell?
May 8, 2014Im currently writing a payroll sheet within excell and trying to write an IF statement to make a cell blank if referring to another blank cell but it is showing the formula is incorrect. Below is the following IF statement that im using;
=IF( F4 <97, AM4*0.8, IF( F4 >=97, AM4*1.1, IF( F4=" ";" "; AM4)))
Keep Cell Blank If Referencing Cell Within IF Formula Is Blank
Jul 28, 2014My workbook is for financial planning but I'm attempting to streamline an input page (name, birthdate, etc) that will be referenced throughout the entire workbook to trigger automatic calculations (present value, education calculations, etc).
The cell in the input page is a birthdate - which when populated will trigger a cell on a different worksheet to calculate the respective age using this formula:
Code:
=IF(MONTH(TODAY())>MONTH('Input Page'!B30),YEAR(TODAY())-YEAR('Input Page'!B30), IF(AND(MONTH(TODAY())=MONTH('Input Page'!B30),DAY(TODAY())>=DAY('Input Page'!B30)),
YEAR(TODAY())-YEAR('Input Page'!B30),(YEAR(TODAY())-YEAR('Input Page'!B30))-1))
The problem is if there is nothing written in the birthdate cell then the age cell will automatically calculate 114 (reference photo below). Ideally I'd like that cell to be blank if nothing is in the birthdate cell on the input worksheet. I'm assuming since I'm using an IF formula to calculate the age already then I'll need to use a macro to to an "ignore".
[URL] ...........
Set Date In Table Cell To Be Date In Another Cell Plus 30 But Leave Blank If Other Cell Is Blank
Nov 19, 2013 I have made a table which contains 2 date columns, Both formatted as date (dd-mmm-yy), the second column is calculated as the first column, + 30, The dates work out fine when adding to a date in the first columns, but from a blank cell it displays 30-Jan-00.
e.g
Started
Finishes
12-Nov-13
12-Dec-13
30-Jan-00
09-Nov-13
09-Dec-13
11-Nov-13
11-Dec-13
Rather than delete the rows with the blanks in the Started column, is there a formula that I can use so that the cells in the "Finishes" column is left blank when the "Started" cells are blank?
The current formula for cells in the "Finished" column is:
=[@Started]+30
Countif: Value Of One Returned To A Cell In A Row If One Cell In That Row Contains A Value Between 10 And 5 (less Than 11, More Than 4) And Another Cell Is Blank
May 8, 2009I have a spreadsheet with details of letters that should be responded to within 20 days, and i want to have a cell showing the amount that that need a response within 10 - 5 days. Basically I want to have a value of one returned to a cell in a row if one cell in that row contains a value between 10 and 5 (less than 11, more than 4) and another cell is blank. For example, AD27 contains 6, k27 is blank. I want AE27 to show 1. I also need the same if the value is less than 5, but i'm sure i could figure out how to alter it.
View 2 Replies View RelatedLeaving Blank Cells Blank In Dragging Formula Combining Different Formulas In One Cell?
Aug 2, 2014I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedIF Blank Or If Not Blank Function That Works With Adjacent Cell With Formula In It?
Aug 12, 2014I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
IF Statement To Leave Cell Blank If Multiple Cells Are All Blank?
Mar 12, 2014I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedHow To Populate Blank Cells With Sequence Until Non Blank Cell Is Encountered
Mar 22, 2014I presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
List - Filling In Each Blank Cells With Value Contained In First Non-blank Cell Above It
Feb 27, 2013I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
Formula To Create Blank Cell Based On Dollar Amount In Another Cell?
Jan 7, 2014Ok, basically C3 is a dollar amount. The default total for C3 is $0.00. If C3 is $0.00 then this formula cell will display a blank cell. If there is any other amount in C3 then the formula C3-C2 will run.
I tried this but it's not working:
=IF(C3="0","",C3-C2)
Move Down Column And For Every Blank Cell Clear Contents Of Cell To The Left?
Jun 1, 2014i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View RelatedCopy Cell Data To Other Worksheet Cell - Leave Blank If Not Currently Filled
Jul 8, 2014I am wanting to have certain cells of data from one worksheet appear on another worksheet once the cells on the first sheet have data entered in them.
I find that I can do a simple formula to copy the cell but I want the cell to remain blank until data is added in the first sheet (it will be a mix of text and numerical entries).
Replace #VALUE! Error For Blank Cells With Blank Cell
Nov 17, 2008The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
Find Last Cell In Column And Paste Formula In Next Blank Cell Then Repeat On Remaining Columns
Jan 14, 2013I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
Conditional Formatting Blank Cell Based On Another Cell Date
Apr 1, 2014I am trying to alert our purchasing mgr when order dates are approaching or not meeting our project deadline.
As of now i have the following rulesif order date is due today or past due - redif order date it greater than project date - redif order date is due within 2wks - yellow
Now all I need is a rule where there is an order without a due date but the project deadline is within 2wks (yellow) and past due or due today (red)
KO_04.01.14.xlsx
Get Text Inside Cell Which Is To Left Of First Blank Cell Of Column?
Mar 24, 2014I want to get the text inside the cell which is to the left of the first blank cell of a column.
I show the problema in the attach imageSin tÃtulo.jpg
Search Cell If Blank Delete Cell Shift Values Up
Oct 22, 2009The below code is what I have and it works but what I need is for it to loop until it doesn't delete anything. How can this be done?
View 2 Replies View RelatedMake A Cell Blank If Another Cell Is Blank?
Sep 26, 2008Make a cell blank if another cell is blank? This is my formula, it checks two dates. It is in cell M5.
View 4 Replies View RelatedConvert Blank Formula Cell To Empty Cell?
Feb 26, 2008I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors.
Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
Copy Cell Content Into Next Available Blank Cell In Sheet2?
Nov 26, 2013I have 2 worksheets, let's call them "Sheet1" and "sheet2".
Sheet 1 has 2 columns (A, and B)
Ie. "Sheet1:"
Col A, Col B
Red
Green Yes
Blue
Yellow
Orange Yes
For each entry in Column "B" that has a "Yes" value, I need to copy the color value in column "A" into the next available empty cell in "Sheet2" in column A.
"Sheet2"
Col A, Col B
Red 3
Blue 5
Yellow 6
Final Result:
Col A, Col B
Red 3
Blue 5
Yellow 6
Green
Orange
how to do this particular challenge? For Sheet2, I think I'll need a function to determine the first available blank cell in column A.
Formula With Offset From Active Cell And Sum Until Blank Cell
Dec 24, 2013I have a formula in cel B1 : =SUM(A2:A100) / A1
I would like to use this formula many times in the sheet, so I would need a reference to the cell the formula is in, and have the SUM range until the next empty cell one column to the left.
So I would need something like (literally):
=SUM(Offset activecell (1,-1) : Offset activecell (1, (look for next empty cell -1)) / Offset activecell (0,-1)
If One Cell Is Blank, How Do I Copy The Cell To The Immdediate Left
Apr 7, 2009I have Column A and Column B. Every row in column A is populated, but only some of the rows in column B are populated. I need a formula that copies column A if B is blank. (i.e. If B6 is blank, copy A6). Thoughts?
View 6 Replies View RelatedCopy Cell On Each Change To Next Blank Cell In Column
Dec 10, 2006I want to copy a changing value from a cell (A3) to the next blank cell in the column creating a list of numbers for a total.
View 3 Replies View RelatedIf Cell Blank, Copy Prior Column Cell Value
Jan 30, 2007I need some VBA code that will allow me to copy the prior columns cell value into the current row if the cell is blank. More specifically if there is a blank cell in column D, then copy the adjacent value in column C to the cell. Hope this makes sence. I've attached a sample spreadsheet that shows my desired output.
View 3 Replies View RelatedConvert Blank Formula Cell To Empty Cell
Feb 26, 2008I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors. Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
View 2 Replies View RelatedCopy Cell Into 1st Blank Cell Of Another Workbooks Worksheet
Apr 27, 2008I have a spreadsheet called "temp.xls" that will change file name often.
This "temp.xls" has text that needs to be copyed to a new spreadsheet named "punchlist.xls" that does not change names. I know how to acheive this using record macro but I need the text to find the next row in the punchlist.xls file. Do all the macros run on the 1st file or do both files need macros?