I am working on a spreadsheet where multiple inputs are entered by a user in certain cells and ranges. I would like to block the ability to enter values in a certain range based on the condition of a check box in the spreadsheet. I do not want to delete or hide the range. Does anyone know a simple command to either allow or not allow input in certain cells/ranges?
View 3 Repliescode below whould return value "a" to specified range(s) The cells are formatted Marlett, 10pt, black, bold, center. Should return a nice tick mark to the specified range if selected shape has value of 1. I double chk'd the name of the shape referred to in code and it is correct Yet value of "a" is not returned, though the chkBox is "ticked". What else can I check?
Option Explicit
Sub cv_ReviewCheckBoxes()
Dim wbBook As Workbook
Dim wsNotesLoose As Worksheet
Dim wsCoinRolled As Worksheet
Dim wsCoinLoose As Worksheet
Dim wsSummary As Worksheet
With Application
.Calculation = xlCalculationManual
.DisplayAlerts = False
. ScreenUpdating = False
End With.........................
I have a command button and ten checkboxes - one for each row of a list. I need a macro that will delete the rows of every checked checkbox when I press the command button.
The list starts in row 3 and continues to row 12. Checkboxes are checkbox1 for row 3 to checkbox10 for row 12.
I have a code in my workbook that Runs another ceo on close. It is:
Private Sub Workbook_BeforeClose(Cancel As Boolean)
EmailOFA
End Sub
What I would like to do is have a checkbox that if checked then this code will NOT run. Can this be done?
In a perfect world what would happen is that once an e-mail was sent once then the checkbox would automatically be checked so that there is no possibility of OFA being e-mailed twice with the same info.
Is it possible to have a message box pop up when a checkbox is checked?
I tried the code as per file attached but cannot work; It requires a direct input into the cell.
When I check the box, I would like the autofilter to come on and select a range & criteria which I have managed. When unchecking the box, the data returns back to normal but the filter stays on the range. When I now check the box with the filter on, the code does not work. I need the filter to stay on if already on.
View 4 Replies View RelatedI am attempting to write a program using a form with multiple checkbox buttons, which will highlight cells based on whether the checkbox is checked (highlighted) or not checked (no formatting). I can get it to highlight fine, but I cannot find a way to determine with code whether or not the checkbox is actually checked, so that I can have the program unhighlight when the box is no longer clicked.
I'm not entirely sure how to further explain that so I will use an example. Imagine a checkbox which can show a window when "checked" and when " not checked" hides the window. I am able to get the window to appear in the first place, but am not certain how to hide the window once the user presses to uncheck the checkbox button. If that is not clear let me know and I'll explain it more indepth as I am not entirely certain how to explain it.
If cells A1 to A10 are filled with content and from range B1 to B10, only B3 and B7 are filled with content, I want Excel makes a string without spaces, just from the rows which have been filled in column A and B.
For example:
A B
1 car
2 tree
3 money tree
4 fruit
5 ball
6 food
7 water park
8 bread
9 joke
10 boat
The string I want Excel generates should be: moneytreewaterpark
So I need all the words in one string but Excel has to exclude every value from a row if the cell in column B is not filled with content. If the string is generated, is it possible to make an hyperlink from this string and open automatically in internet browser?
I have a workbook with a report on Sheet1. If the checkbox in column N is checked, I need the data from that row (column A-S) to be cut and pasted on the next available row on Sheet2. I am still new to VBA/macros. Would this be better if I made a button to update the sheet every morning or could it be automatic when the checkbox is checked (preferred).
View 6 Replies View Related- I have 2 checkboxes and I need run macro, if one of this checkboxes are checked (if checkbox1 then run macro, if checkbox2 then run macro2)
- If this checkbox is checked run macro every "xy" minutes, and this "xy" is written in cell I1 (for checkbox1) or I2 (for checkbox2)
I add my excel for better understanding
I have a worksheet which includes in column A a date in the format dd/mm/yyyy what I would like to do is have a checkbox control on the same row (and this would be the same for all the rows on the this worksheet) and when it is checked it updates the value of a cell on another worksheet within the same workbook with the date from column A. i sort of know how to do it on an individual basis but was wondering what code could be applied to a 'finished editing' button which would then check the state of the checkboxes on the sheet and update the values on the other sheet. I'm afraid my knowledge of VBA is poor when it comes to the logic of things...
View 2 Replies View RelatedI want to add a checkbox that when checked, copies a value (E3) in the row and pastes it into another cell on the same row (G3). I would also like for it to be cleared when unchecked.
View 8 Replies View RelatedLets keep it simple. I have a userform. On the userform are 4 checkboxes.
Checkbox1 is checked by default, the others are empty.
On command click I need to pass the values to a called sheet.
I am creating a main worksheet (Legend) in which information will be entered and then populate to other areas (worksheets) within the workbook. I would like to create a print macro - that will run and print all the worksheets that we have selected on the "legend" page. These worksheets would have been selected by ticking a check box.
My question is how to associate a check box to a worksheet? For example - the second worksheet is named " Schedule A" 3rd "Schedule B" and so on.
- The check boxes will be name schedule A, Schedule B and so on.
- I would like to associate (link) the checkbox Schedule A with the Worksheet of the same name. Then when this checkbox is selected, and the print macro runs it will print the worksheets that are selected.
I need to copy all the cells to a "new worksheet" if the checkboxes are checked.
I have thousand of cell in here but i just narrow it down in this example.
example:
A B C D E F G
21 22 23 24 25 26 checked
31 32 33 34 35 36 unchecked
41 42 43 44 45 46 checked
51 52 53 54 55 56 unchecked
there is a command button in here that when it was click it will open a "new worksheet",
what I need to see in the new worksheet is this:
A B C D E F
21 22 23 24 25 26
41 42 43 44 45 46
I have a userform with a CheckBox and a ListBox. Is there a way to have the CheckBox to automatically get checked if a selection is made in the listbox?
View 9 Replies View RelatedI have a series of checkboxes, we'll say checkbox 1-5. These are all listed on a sheet called products.
If for example you select check boxes 1,3 and 5 I need those to then be listed in a column in that order on another sheet called purchased.
If I went back and then uncheck 3 and check 4 then purchased would be updated.
I understand that if you take a cell and name it P1 for instance..and then on another sheet enter =p1 in a cell that they will update and share data, but I dont know how to pull from a check box..nor do I know how to assign a row of cells to accept multiple and changing information from those checkboxes.
I have a userform where the textbox already pulls data from a worksheet. I have a checkbox next to the textbox, If the checkbox is true it finds the textbox value on a worksheet and using Offset it inserts "yes" in the next cell.
View 6 Replies View RelatedI have a multi-worksheet workbook that has many forms control checkboxes throughout it. I'm looking for some VBA that will change the background (fill) color of ALL the checkbox when it is checked (True). I've seen code for a single checkbox, but not multiple/all boxes. I know just enough VBA to be dangerous, but I'm up to learning anything new.
View 3 Replies View RelatedI have an Excel 2010 workbook with many worksheets using hundreds of Form Control (not ActiveX) checkboxes. I need a bit of VBA to change Checkbox background color of each checkbox whenever the user checks the box. I assume this needs to be a click event? I don't even know the Checkbox property name I need to change I'm learning VBA as quick as I can
View 4 Replies View RelatedI need to be able to select a checkbox on my form and when selected, fill data from other cells on the form to other cells. Here is what I have so far
Sub CheckBox1_Click()
If CheckBox1.Value = True Then
Cell(F13).Value = Cell(B13).Value
Else If CheckBox1.Value = False Then
'do nothing
End If
End Sub
But it does not work I get a compile error on the: Cell(F13).Value = Cell(B13).Value
I'm creating a basic form or templateusing Excel 2010 where the user will fill out information (See attached screenshot) I'd like to incorporate two a check boxes, that when ticked, change the display of the second table, either adding, removing or splitting of of the current columns in to two?
Is this, or any variation of, possible using Excel 2010.
I need to move data stored in column A to columns B and C, then skip 3 blank lines and perform the operation again. The attachment shows a before and after example. I'm very much a novice.
View 3 Replies View RelatedI have a long list of stock values (col C) arranged in time blocks so;
CREATE TABLES LIKE BELOW?B C M N
19:00 50.00 0 47.1
19:00 51.00 0 47.5
19:00 52.00 1 48.3
19:00 51.00 0 47.3
19:10 36.00 0 45.3 (nb time has changed)
etc
I need a routine that takes the following action;
When the value 1 occurs in col M row .. (it will only occur once in each time block) and N1 on the same row has the highest value [ 1 and 48.3 above] put 1 in column O on the same row else a 0.
If 1 occurs in column N (time block X) and the value in N is not the highest then store a 0.
This needs to be done for each time block.
It feels like this can probably done by an If or vlookup type of routine but I can't come up with one that works across blocks of times.
I have userform which shows days in month & populated Listbox for cell values. I want checkboxes to be ticked and Textbox to count when conditions are met, for each day. Range is, example (for 1st day) from E3:E318. My code so far is :
[Code] .....
So, When "MIN1" reaches value of 2, checkbox is ticked - If more than 2 then Msgbox ; When "MIN5", I want to be counted in Texbox ;
I have 4 checkboxes
Actual 2006
Budget 2006
Actual 2007
Budget 2007
Say when the box Actual 2006 is clicked the code is...
If Columns("U:IV").EntireColumn.Hidden = False Then
Columns("U:IV").EntireColumn.Hidden = True
ElseIf Columns("U:IV").EntireColumn.Hidden = True Then
Columns("U:IV").EntireColumn.Hidden = False
End If
But when I click it, I get this error message. "Unable to Set the Hidden Property of the Range Class"
married, widows, single checkbox is selected
macro solution
good work.
I have sheet 1 a1:a3 with 3 check boxes.
In sheet 2 i have 3 ranges green = a1:a20, red = b1:b20, orange = c1:c20. (in each range there is a different list of customers) What i would like is on sheet 1 to click check box 1 and the values from range green (on sheet2) are dispalyed in sheet 1 @ d1
I am attempting to modify a spreadsheet so that it will enable a range on Sheet3 (I9:K42) if a check box is checked on Sheet2. If it is not checked, it will lock that range on Sheet 3 and grey (or gray, if you prefer) out that range.
View 9 Replies View RelatedI am good at excel but an infant with VBA. I have inserted a checkbox onto my worksheet. I want it, when checked, to select a row of data ("k5:k16") from Sheet 1 and copy it to ("a1:a12") in Sheet 5. When the checkbox is unselected, I want the ("a1:a12") to be cleared. I've tried several different ways to copy and continue to run into errors. I know there is a simple solution, but it's beyond me.
View 2 Replies View Related