I inherited a spreadsheet that contains a link to another spreadsheet. I want to remove the link and I can not find a way to do this. I have checked under Edit/Links but there is not a delete or break links options. The linked spreadsheet does not exist.
View 4 Replies
I copied a worksheet with a pivot table as a new worksheet. I wanted to group each pivot table differently on each worksheet, but the changes I make on one worksheet is reflected on the other. Is there a way to break the "link" between these tables?
View 2 Replies View RelatedI've recently aquired a spreadsheet previously maintained by someone else. After my initial review the speradsheet has many links that need to be updated, which I do via Edit-Links, but there are also some links that no longer need to exist. I have reviewed all sheets and some links just no longer exist, however when I try to break the link or change the source nothing happens. I have had the original owner also check and confirm and they have the same issue. Finally I tried copying all the tabs into a new workbook, but the link shows up again.
View 3 Replies View RelatedThis is the code I use to start a bash session and run a .sh:
[Code]....
It works well but it is a long-running program and I would like to close down Excel, or run different sessions of Excel, while it is running. Right now, if I close Excel while the bash is running, the external script stops.
Is there a modification to this command line that would safely sever the link between Excel and the bash session?
I have simple Countif and Averageif formulas that I would like to have linked to variable data in cell E6 on the Assumptions (2) tab however, the formula is not taking the cell as the criteria and only taking a hard number when I am using >=.
The example would be: I3 needs to be able to use the data changed in E6 for the >= number instead of the hardkey 29...
I have a formula in a cell which is refered to other cell within the same sheet and also to other sheet from other file. say
C1 = A1+B1+data file c1 Data file is another file in other location.
I was trying to break a external reference link (from Data File) from Data _ Edit Link, but it is converting all the formula to value. How is it possible to break only the external link without damaging the formula within the sheet say c1 = A1+B1+26 (value from data file c1)
Copy data from workbook, open existing workbook, select range and paste. But my copied data is lost.
Sub Select_Copy_Paste()
'
'
Windows("ElektroFunctiesDatabase.xlsm").Activate
Sheets("PowerSupply's").Select
Range("A2:I6").Select
Selection.Copy
[Code] .........
' Here i need to do something to paste data into r.address?
Here's my macro:
Code:
Sub CopyRow()'
'Copies row to new sheet, highlights it, marks column 'A' as copied.
'
Dim cCell As Range
Set cCell = Selection.Cells(1, 1)
Selection.Copy
Sheets("Sheet2").Select
Rows("2:2").Select
[Code] .....
Is it possible to modify it to paste into a different workbook called c:filesDestination.xlsm, instead of the existing workbook (Source.xlsm)? The destination sheet name is the same (Sheet2). It's OK if both workbooks are open at the same time.
The amazing code I saw was from this thread Auto lock cells after data entry when file saved... where the code was made by Jafaar Tribak.
It basically locks cells that have had data inputted into them when the file is saved (with a nice prompt warning of the used cells being locked.
This is Jafaar's file [URL]
And this is my file where I'm trying to make it work in the "Employee data entry" Sheet:
[URL]
And finally this is the file after I tried to copy the code over : [URL]
Trying to make it so that in the employee data entry sheet locks cells after an employee inputs some data into said cells.
I thought that by setting an "inputrange" on the employee data entry sheet the code would track it down automatically but maybe I'm completely wrong. I cant see anything wrong with it (probably because I"m not that good at vba) but I fear I may have left out something really simple!
I seem to disable my other macros when i try to insert this code in (I have a macro that when you click on a cell a calendar pops up so you can click on a day from the calendar rather than typing out the date)
i came up with this..
Sub Copy_To_New_Workbook()
Application. ScreenUpdating = False
Dim strFileName As String
strFileName = Application. GetOpenFilename(filefilter:="Excel Files (*.xls), *.xls", Title:="Please select the excel file to be copied")
I have a very brief question
dlgAnswer = Application.Dialogs(xlDialogOpen).Show
Selection.Copy
Windows("Derivative YK pricing Mod G.xls").Activate
Columns("B:B").Select
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _
xlNone, SkipBlanks:=False, Transpose:=False
Range("C5").Select
Application.CutCopyMode = False
Windows("EXPORT1.xls").Activate
ActiveWindow.Close
As you can see, I open a workbook with the dlgAnswer, I was wondering how I could close that opened workbook
Currently I have
Windows("EXPORT1.xls").Activate
ActiveWindow.Close
however the workbook will not always be called export1.xls, I want it to close whichever one I opened earlier.
Somehwere in a review of your book, it referred to an add-in that attempts to break all links to a workbook. I looked on the site (microsoft) with the provided URL but could not find it. Is it still there? Does it work for EXCEL 2002?
View 4 Replies View RelatedI am new in VBA, but I have a short procedure to break all external links in the currently active workbook.Is there any option to firstly update all external links and only then break them?
Sub BreakLinks()
Dim Links As Variant
Dim i As Integer
With ActiveWorkbook
Links = .LinkSources(xlExcelLinks)
If Not IsEmpty(Links) Then
For i = 1 To UBound(Links)
[Code]....
I need something to recover or break a password from a protected workbook.
View 1 Replies View RelatedI'im using an index - match - match formula with links to an external file.
Everything works fine until I close the source workbook. At that moment the liks break. The error I'm getting is #REF!.
I suspect the reason is that the source data are in form of an official table. I tried some formulas with data in the same workbook but outside the table and they keep working after the source file is closed.
I really want to keep the source data in a form of an official excel table.
I have several hundred workbooks which are linked to a master workbook from where the workbooks draw their information. Now I would like to break all the links in all of the several hundred workbooks to this master workbook and retain the information. Is this possible without having to open each workbook individually and break the links via the 'edit links' option?
View 1 Replies View RelatedI tried to open an existing Excel workbook, it tells me that it is already open. There is nothing on the screen. I closed Excel (using 2003 version) and restarted computer also. I tried to open the file again - nothing shows up on the screen. When I attempt to open the file again I get a message that says "(file name).xls is already open.
Reopening will cause any changes you made to be discarded. Do you want to reopen (file name).xls?". Even if I reopen the file, it still does not show up on the screen.
How do I insert an existing worksheet (previously exported from the same workbook)? I need to be able to do it programmatically.
Is there a way to copy a sheet in one Workbook to and Another Existing Workbook?
I have attachment two Workbooks to this thread.
The one entitled: Copy a Sheet to An Existing WorkbookI would like to copy any Sheet to Workbook "Create PowerPoint"
I would like it to be the first sheet in the Workbook "Create PowerPoint"
The one entitle: Create PowerPointIt has three sheets that have data already in it
I need a macro to add a work sheet template to an existing work book, I can add a blank work sheet no prob but it needs to be a template
View 3 Replies View Relatedthis is the macro code I am using to copy the currently selected worksheet to an existing workbook:
Sub test2()
Workbooks.Open Filename:= _
"C:Documents and SettingsManagerDesktop PS444Log.xls"
Windows("PS444.xls").Activate
Sheets("sales").Select
Sheets("sales").Copy Before:=Workbooks("PS444Log.xls").Sheets(1)
End Sub
The source workbook is named PS444
The receiving workbook is named PS444Log
The sheet to be copied and moved is named sales
The source workbook is already open and the code is executed by clicking a button on the worksheet.
If I perform the steps manually the worksheet in the source workbook gets copied correctly into the receiving workbook.
The problem lies when I try to execute the code, the source worksheet doesn't get copied to the receiving workbook.
The receiving workbook gets opened but the worksheet does not get transfered.
Neither of the workbooks are protected nor are either of the worksheets protected in the workbooks.
Can someone tell me why the code is not copying the sheet to the receiving workbook.
I developed the code using the macro recorder so I don't understand why it doesn't work.
I have a user who is trying to use <EDIT><MOVE OR COPY SHEET> to copy a sheet to an existing workbook. She has them in the same directory and has them both open, but when she tries to copy a sheet from either of them to the other, the only workbook listed in the "TO BOOK" drop down menu is the one she is in. NO other workbooks show up as an option for her to copy to.
View 12 Replies View RelatedI have a vbscript that creates a workbook in an existing spreadsheet. I would like to have the script create the spreadsheet if it does not exist. That part is easy enough. The part I don't know how to do is to have the macro that has to run on the sheet created by the script.
View 9 Replies View RelatedI am working on this estimating template. To be used on Excel 97, 2000 and XP systems.
I have a few issues i am unable to resolve.
There are 2 of the worksheets (Short Quote and Stores Req) which individually need to have a button on them so i can create a new workbook as an exact coy of that sheet. but with just the values and not the formulas.
Also i am unsure on the macro on the workbook currently( as i dont know how to do macros) i dont know what it does?
I have a VBA script that works great when run each day, as it's intended. But if a user skips a day, we end up with an error when deleting an old worksheet. The old worksheet to be deleted has a date as the sheet name (i.e. "2014-May-23").
We've developed some code to find the most recent FILE if there wasn't one created on the previous business date, but what VBA code can I enter to correctly identify and delete the old, outdated worksheet? My final spreadsheet should contain just two dates worksheets - one each for the past 2 business dates.
Here's a snippet of my current coding:
Code:
Sub Master_3D_Macro()
'
' Master_3D_Macro Macro
'
' Keyboard Shortcut: Ctrl+j
'
Dim CurrDate As Date
Dim Holidays(1 To 9) As Date
[Code] ..........
how do i go about creating a macro to copy a range in sheet 1 in workbook A and paste that to a new tab(the last one) in the existing workbook B. i would like the tab to be renamed based on a cell value. preferably workbook B doesnt have to be open, and the save and close it
View 6 Replies View RelatedI want to merge different worksheet of an existing workbook into one by macro .I did not want to repeat the rows label for each worksheet data.Also I want to get at right hand side i.e in G column the data to be extracted for respective worksheet in the merged data.I have enclosed in attachment an expected solution in a sheet name "merged".However the number of worksheet is here only 3 for sample purposes.However,in reality there is more than 3 .
View 9 Replies View RelatedJust curios if this is the most efficient way to copy a workbook x number of times.
I tried copying 77 workbooks and not sure exactly how long it took, but about 2 mintues. The original workbook is 300 KB.
How to amend existing code in a workbook that is used by many different users. I am working in Excel 2003. The existing code copies data from certain cells in the active worksheet (which is password protected) into a new worksheet and saves that new worksheet to a temp folder, sends it to a particular email address using outlook and closes it, returning the user to the first workbook. You will see that it also unhides then rehides columns of the first worksheet during this process so that the user never has to see them. Problem here is that none of the users are using outlook anymore and I would prefer that this new spreadsheet that is created just be saved to the users desktop. I have found bits and pieces of what I needed on the web, but I can't seem to put it all together (I usually end up being sent to the debugger just short of having the newly created spreadsheet saved to desktop). Here is the existing code:
Private Sub CommandButton1_Click()
Range("A2:G2").Select
Selection.ClearContents[code]....
Essentially what I need to do is circumvent the whole email bit and save the spreadsheet that is created to the users desktop instead of a temp folder.
I have a userform that I want to add to a button click event, to fill userform data into a different (already existing) workbook.
What I have is a userform for entering Purchase order information (Supplier, Date, PO#, Products, Descriptions, Qty's, expected dates etc.) What I am trying to accomplish with this particular button, is to 'Generate Purchase Order'... Have a seperate workbook, with a 'blank' pre-formatted formal purchase order that will be autofilled with said userform. The now generated Purchase Order ready for print/ save-as.
