i've looked on the threads and there are some exaples of this but not specfic enough.
i need code that allows me to browse my PC for Excel Files then select one file and put it's name into the activecell?
i want to browse a text file with 10 textual lines and rewrite the contents in the same file (starting from line number 11) from bottom to top.
View 9 Replies View RelatedI am trying to attach an Excel file to a post. I found the following in FAQ: "To attach a file to a new post, simply click the [Browse] button at the bottom of the post composition page, and locate the file that you want to attach from your local hard drive" But I cannot find the [Browse] button. I should have said "to attach a file" not "to attach a post" in the header.
View 2 Replies View RelatedIs it possible to use a Form control which choose a folder/file in a specific location (Ie: Browse button)?
Currently I put the location details in a textbox.
send automaticaly, or it waits until user will push button send or brows to attach the file.
In all given samples it says: “If you use Microsoft Outlook”. I know that any office has Outlook. Is it impossible to make Outlook usable with macro and then send an e-mail?
I have looked in books and online and can't seem to locate how to create a macro that opens a browse function. From Excel I would like to click a button to start a macro and have that macro prompt me where to browse for the file. There is a lot of other code that will go after this step (which I already have), so once I click to "open" a file I want the macro to continue.
View 6 Replies View RelatedDoes VBA support any type of "browse for file" interface? I'm thinking something similar to an inputbox, but instead it gives you the standard looking windows explorer window to find a file (think adding an attachment in outlook).
The function would return a string.
I am trying to code where when someone hits the command button it will popup with the browse form and they find the location of the file and it puts there choice in a cell. don't know if it matters but the location would always be a picture. Here is what I have but it shows -1 in the cell
HTML Dim strFilePath As Variant
strFilePath = Application.FileDialog(msoFileDialogFolderPicker).Show
shUserInformation.Range("D12").Value = strFilePath
I am trying to write some VBA that will select a row of cells that each have links to cells in another workbook, and then either autofill the formulas down (or pastespecial them down) for 20 rows. I have that part down using either pastespecial or autofill, but -
Since the forumulas are links to another workbook, Excel wants to resolve that link to calculate the values at the time of the pastespecial or autfill. If the sourced workbook is not open, the "browse for file" popup displays. I don't want the popup to display and would rather just get the #REF in the pasted cells and let it resolve the next time the sourced workbook is open. The end result would be like clicking "cancel" to the "browse for file popup", which I'm tired of constantly doing... I would just like to skip that popup all together and get the #REF value.
I have run into a problem in a project where I know what the folder root of the file I would like to import into excel is, but I do not know the file name.
I would like to open a dialogue open where I can select the file I wish to import from the known root supplied and retain the file name as a string.
All solution I have read assume the full file root is know or file name is known but root is unknown
I am working with Excel 2003.
I have a UserForm in which i have inserted a CommandButton. I also have a Table on a Sheet in Excel that i would like to save as PDF.
When i click the CommandButton on the UserForm i would like the SaveAs screen to come up and have the Table (or Used Range in the Excel Sheet) as the selection to be Saved as .PDF format.
loop and range function to apply in the below code through which I can avoid writing code for all the rows.
I am trying to open excel files located in single folder from files name (along with the path) in single worksheet (Column B and Row 1 to 500).
I have created follwing code which opens the file and then runs a macro in it.
a Sub Test()
Dim strFName As String
strFName = Sheet1.Range("B2").Value
[Code].....
I have a macro which was developed with the help of our Experts.
I need all that macros to be in 1 button would that be possible.
I have tried this but not able to make it.
I have two sheets that contain data and I have to switch between them all the time, and I thought I could make it easy by assigning the "switch" to a macro. I am now looking to assign that macro so a single button, like the "`" key. I have tried various pieces of code but none of them worked.I think something like the below may work but I don't know how to start.
[Code]....
If Sheets("Sheet2") is active, then call switch 1, to switch back.
I am having some 60+ workbooks in which the end-users are entering data. Each workbook is protected with different passwords.
We have the systems networked. The main compilation file is in the server D:MAIN folder. The workbooks for users are in D:Mainusers sub-folder. The files in users folder are only allowed to have access by the users.
Now, in the compilation sheet I have linked the data from all the individual files (which is in its subfolder). I am facing a trouble that the excel asks password for each and every workbook to update the links in the compilation workbook.
Any possibility to overcome this trouble? A VBA code is the solution? or any other alternative measure is there to solve?
I have the following macro in my spreadsheet to extract specific data from closed workbooks in a folder. It works great but what I would like to do is make it so I can just open the spreadsheet and press a button I create that will extract the data from the folder that it lies in.
Currently I have this specific spreadsheet just sitting by itself and I manually work out the address of where my spreadsheets lie and add that address into the code and run the macro. I find it a little cumbersome and me not knowing a hell of a lot in VBA don't know what the command is to make it pull the data from the folder that it resides in. Once I do this then I can create a button and assign the macro to it. Can change the code to be able to extract the data from all of the workbooks in the folder that the macro enabled spreadsheet lies?
[Code] ....
How can i use a single command button to do multiple task in Excel 2010.
First Instance I click -- It filters only With Record "Yes"
Second Instance I click -- It filters only With Record "No"
Third Instance I click -- It removes filter.
Sub Increment()
Dim Lr As Long
Lr = Cells(Rows.Count, "A").End(xlUp).Row
If IsNumeric(Cells(Lr, "A")) Then
Cells(Lr + 1, "A").Value = Cells(Lr, "A").Value + 1
End If
End Sub
This adds 1 to the previous cell and displays in the next available cell.
How could I make it sao that when this number enters in the cell it hyperlinks automatically to the master file?
Before this button was introduced I used this:
Private Sub App_WorkbookBeforeSave(ByVal Wb As Workbook, ByVal SaveAsUI As Boolean, Cancel As Boolean)
On Error GoTo Err_App_WorkbookBeforeSave
Dim hl As Hyperlink
For Each hl In Me.Hyperlinks
If Wb.FullName = hl.Address Then
Application.EnableEvents = False
Cancel = True..............
Is it possible to write vba code that will generate a text file with ALL changes that were made to an excel file. Ex. If Cell A17 = "Monday, June 4, 2012" and a user updates Cell A17 to "N/A", I would like to know what the value was before and after the udpate was made.
View 8 Replies View RelatedThere are multiple tabs in my workbook ("Template", "Database", and "Summary"). I would like to add a "Save to file" button on the "Template" sheet and it will dump a copy of this sheet only using the data on cell C4 and C7 as filename, not the entire workbook.
View 9 Replies View RelatedI am using Excel 2003 and need to save via VBA code a single tab in a workbook to a new workbook. I need to be able to specify the new workbook file name and location. The copy feature on the tab won't work because the data is too large and I get an ugly message using that option.
View 9 Replies View RelatedI have a spreadsheet where I want to require certain fields to be completed then I want to have that file auto emailed. I have learned that I do need to have the file saved before sending otherwise the data will not appear in the email, so with this I want to have the file temporarily saved emailed then the temp file deleted.
Here is the code I have so far but it errors on the blue text, I did change the TempFileName from = "Copy of " & wb1.Name & " " & Format(Now, "dd-mmm-yy h-mm-ss") to = [C16] & "_" & [B6] & "_" & [D6]
Private Sub CommandButton1_Click()
If Range("B6").Value = "" Or _
Range("d6").Value = "" Or _
Range("f6").Value = "" Or _
Range("E9").Value = "" Or _
[Code] ......
I have a file that I save with a new version number each time I make major changes. The file name currently is: "Telephony Equipment Inventory v26 (Summary).xlsm". The "26" is the variable number. give me the vba code to ensure I open the file with the highest version number?
View 6 Replies View RelatedI just have a quick question with regards to two-way interpolation of data.
I have a data table which has x-values, y-values and z-values.
I need to obtain an interpolate value for z, given a value for x and a value for y.
The x value specified is 1.569 and the y value specified is 1.66.
I know how to use the FORECAST formula for a simple x, y table, but I have no idea what to do here when I need to find a z value, given the x and y values.
I'm trying to find a way to enter the value of a cell from another worksheet into my currently active cell. The (obviously incorrect) code I'm working on looks something like this:
View 2 Replies View RelatedI would like to obtain the name of a workbook after activating it and then paste it into an input box.
How could I do this?
I have created a browse button in excel and assigned a macro which will ask the user for folder. I figured it out for windows using Windows API Functions as mentioned at http://www.cpearson.com/excel/BrowseFolder.htm. However cannot get it to work for a Mac.
View 2 Replies View RelatedMy company has files that are already in use. I don't know too many details about how they work, but somehow saving the file will screw it up and my boss has to go back and reset something or other to correct it. Obviously it's connected to some other software somewhere. The code below will block Save and Save-As. BUT how do I get the file to hold onto the code without actually saving the file after the code is added (since the file shouldn't be saved)?
VB:
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
If SaveAsUI = False Then
Cancel = True
[Code].....
I would like to:
1 - Highlight the row for the first duplicate/single "Ana M."
2 - Then skip the next duplicate/single row "Jane S."
3 - Then Highlight the row for next duplicate/single "Sam"
4 - .... and so on.
Sample Data:
NameStreetPhone
Ana M.12 A St333-3333
Ana M.23 Z St333-3333
Jane S.12 A St555-5555
Jane S.15 Z St555-5555
Sam A.55 A St222-2222
Tony J.45 A St444-4444
Tony J.11 B St444-4444
Tony J.66 Z St444-4444
I want to save a single sheet from my Excel file to PDF. But this Macro saves all the sheets in separate pdf files. How do I adjust it to only save the breakdown sheet of my Quoting workbook?
Sub Save2PDF()
'
' Save2PDF Macro
Range("L66").Select
ActiveWorkbook.SaveAs FileName:= _
"Macintosh HD:Users:myratriegaardt:Desktop:Q1Breakdown.pdf", FileFormat:=xlPDF _
, PublishOption:=xlSheet
ActiveWindow.SmallScroll Down:=-160
End Sub