Can A Macro Start From Wherever Cell The Active Cursor Is On
Can a macro start from wherever cell the active cursor is on? or
perhaps from the cell that the macro button is clicked?
What I am trying to do is copy the data from F(whatever) to whatever
the last empty cell is in the row holds the active cursor. Or I can
create buttons for the macro to run, and it could copy the information
in that particular row.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Start Macro From Clicking In Cell
I have created a macro that autofilter values in sheet 2. In sheet1 I have a cocpit of values from Sheet 2, 3, 4 and 5. In the monitoring cells in Sheet1 I would like to doubleclick (or similar) in the cell where I have a value from ex sheet 2, and then trigger the macro which does the autofiltering.
View Replies!
View Related
Return To Active Cell After Macro Run
I am using Excel to tabulate scores for my employees. We work in a very busy and open office, so there is a need to be able to obfuscate the scores, but also help keep from losing my place while punching the scores. I would like it to be able to return to the last cell that I was punching a score in...I used "ActiveCell.SpecialCells(xlLastCell).Select". I have also used " x= cells(Rows.count,2).end(xlUP).row" followed by "cells(x+1,2).select", but both with no luck... Sub Hide_Scores() Range("B15:EU35").Select ActiveSheet. Unprotect With Selection .HorizontalAlignment = xlCenter .VerticalAlignment = xlCenter .WrapText = False .Orientation = 0
View Replies!
View Related
Moving Cursor Along One Cell
I was able to input barcode reader data into A1, and automatically get the date inserted into B1. I wish the next activecell to be C1, instead of A2 as the above code is doing at the moment - so how do I alter the code above to make this happen?
View Replies!
View Related
Cursor To Move To Right Cell
I want a macro which will move cursor to right cell of the same row when the user will press enter in a particular sheet of particular workbook. I have tried the ToolsoptionsEditmove selection after enter , but this applies to excel as a whole and needs to be change every time if another worksheet or workbook is used and thus creating difficulty. Can this be done through a macro as I need the cursor to move to right cell only for a particular worksheet and for a particular workbook?
View Replies!
View Related
While Mouse Cursor On Top Of A1 Cell
I would like to change A1 cell's Interior.ColorIndex to red color and A1's font format to Italic, while mouse cursor on top of A1 cell. Can i do it with a VBA code or any different way to do it? For example: Sub CursorOnA1() If MouseCursor OnTopOf [A1] Then With [A1] .Interior.ColorIndex = 3 .Font.Italic = True End If End If End Sub
View Replies!
View Related
Cursor To Stay On The Cell After Pressing Enter
Imagine you have only one column - column A. In column A you have 500,000 + rows with text like the following: !magnus snooze' sleepy/ act noun act verb Today&tomorrow *bialgebras /dev/ null dev ull 1970; Dwight Schrute and your goal is to figure out a way to simultaneously transform the above rows into: snooze sleepy act act Todaytomorrow bialgebras devnull devnull 1970 DwightSchrute I know I can use Filter and filter out characters like &'!/; but that takes too long because I have a lot of lists to go through with thousands of entries. There must be a macro that will close spaces between words when only one space exists, but eliminate every word if 2 or more spaces exist between words - as well as eliminate unwanted characters like the ones I described above. I know I could use substitute and eliminate the spaces between words =substitute(a1," ","") but then I'd have to filter each and every instance of unwanted character.
View Replies!
View Related
Move Cursor From To Cell B After Click On Cell A
exist any function that do following? I am on the row 100 in column G. I had a freeze the first row where i have hypertext and other function. I want add here (in the 1. row) something like hypertext, but i want to stay in the row where i was. When i am on row 100 in column G and i want to create function which move my cursor to column W but in the same row (row 100 in this case). Next time i will be in row 154 and i will want to move my cursor again in column W and use this same hypertext/function or what.
View Replies!
View Related
Using 1 Macro To Start Another
I have a macro, at the end of which I'd like it to jump to a second macro OR incorporate the second macro into the 1st. I've tried combining them in several different ways, but get an error 13 every time. So, basically, if I can't combine them into 1 macro, then perhaps I can get the 1st to automatically start the second. The 1st code is based on a previous solution (for a different problem!) I received from this forum Here is the 1st
View Replies!
View Related
Macro: Start Automatically Write
In First Part I Have R1 1 -17 R2 20-22 I Want When I Write R1 1-17 in cells {B1:C1}And R2 20-28 In Cells {B2:C2} Start Automatically Write From 1-17 in Column E and 20-25 In Column F in The Same Manner You See in The Pic He Ignores F18,F19 And Start Counting From F20 And Then Color The Common Area Which {E18:F19} And Make The Same With The Second Part The Pic Which {G1:I2}
View Replies!
View Related
Macro Start When Data In Another Workbook Changes
I am brand new to using macro in excel. I have a report that is generated every month (looks like sheet 1) and I use that data to create an analysis report (sheet 2). Each month forecast is replaced by actual for the month that just finished, I have tried to use macro recorder to make this more automated as every month I copy the forecast down and the actuals in and then readjust my totals and add in the now 12th months forecast, but I have had no luck.
View Replies!
View Related
Start Macro At Workbook Open
I found an outlook plugin that saves any incoming emails as text. It also has an option to run an exe or bat file on saveing the email to text. I have a macro in a worksheet that will process the email to a database and send out a response. What I am trying to figure out is how to run the macro in the worksheet whenever an incoming email is saved. So I have the 2 components that I need, I just need to tie them together so that everything is automated. Does anyone know how to achieve this? Can I use a batch file to open an excel workbook and run a macro? Or can I create a standalone macro (outside of excel) that can open the excel file and run the macro.
View Replies!
View Related
Display The Macro Start/stop Recording
How can I make XL (2000) display the macro start/stop recording and relative/absolute box that used to appear whenever I started recording a macro? Such an apparently simple issue, but I can't resolve it! Somehow I lost this small box, and I know how to force it to display via customize, but it doesn’t seem to work the same (relative does not work as such) and the buttons or box disappear.
View Replies!
View Related
Start/Run/Call Macro From Another Application
I have a program that produces data while im working on it, i want to start an excel macro (excel app running in background) from a keyboard shortcut that imports the current data. I cant think of a workaround, letting the macro run on a timer isnt possible since i want to be able to decide when exactly it imports the data, without the need for alt-tabbing out of the program (since its an directX app so alt-tab takes time and is annoying).
View Replies!
View Related
Disable Macro After Saving With The Week Start Date
I am trying to code a macro call where in once the file is saved with the current week start date all the other macro's should be disabled. Since am having lot of data and report sheets which needs to be added and deleted in the run. It causes me problem when I try to open it again to view the results. For example I have a sheet named apple and another one applereport. I have made my code to delete apple since it is a data sheet. I want apple report to have all the other macros disabled once its been renamed to week start date for now it is 16 Mon 2007.
View Replies!
View Related
File Browsing In Macro - How To Change Default Start Location?
I use an image analysis program ImagePro which can call Excel within it's macro language (which seems to be visual basic). I looked up on this site how the change the drive (ChDrive command). But still when the Excel section (after With oExcel) executes the default file location in the browser is in My Documents on the C: drive. Prior to this code Excel has been launched by this ImagePro macro, and a file Cumberland Template has been opened from the C: drive. Now I would like to do a Save As, but have Excel start at the I: drive location.
View Replies!
View Related
Always Start In Certain Cell/row
I have a macros that copy’s certain bits of data forma row, then copies it to another sheet, however I always need it to start in column A. E.g. if my active cell is C3, I want to start in A3, likewise if the active cell is E3, I want to be able to start in A3.
View Replies!
View Related
Macro Will Not Look At Active Workbook
I have 2 workbooks open in the same excel session. each with its own unique name. The macro looks for a specific name and then copies data from this workbook to the 2nd workbook. For some reason it no longer like the name of the workbook #1 which has not change (as far as I can tell) When I run the macro i get the run time error '9' subscript out of range, when i click on the debug this is what is highlighted and underlined.
View Replies!
View Related
How To Run Macro From Active Sheet
I have written the below macro to copy data from a sheet called "Fixit Example 1" to a sheet called "Fixit Summary Example". It works fine, but I'd like to be able to run it from any "Fixit Example XX" worksheet. As written, the data is always copied from "Fixit Example 1" regardless of what worksheet I have open. I tried replacing Windows("Fixit Example 1.xls").Activate with Windows(Active.Worksheet).Activate but got an error "Run time error 424. Object required." Sub MoveData() ' ' MoveData Macro ' Macro recorded 18/03/2009
View Replies!
View Related
Macro To Refresh All Active Cells
writing a macro that will refresh all the active cells in my "Master" worksheet. Every month, I append data from one Excel worksheet to the end of my Master worksheet. I want all the cells in the Master worksheet to be formatted as text. However when I copy the cells, I get different formats, i.e. text, general, number, etc. Simply selecting the new data and applying the text format from the Format Cells popup, does not work. I know I need to "re-enter" all the data for the new format to take effect but I really don't want to F2-> Enter thousands of cells. how to write a macro that will refresh all active cells in a worksheet?
View Replies!
View Related
VBA - Delete Space (cell Start)
I often have to work in Excel-spreadsheets which provide values to me in a rather unpractical way. For some reason, every cell entry starts with a space, followed by the value. It makes it impossible to start calculating with the values right away. I tried replace: " " with: "" But that way all the spaces in the sheet are removed, not just the spaces at the start of each cell. I would like to avoid that, as it makes the descriptions a bit difficult to read... So, any ideas on how to write a little macro (or a tric in Excel itself) which I can use to quickly get rid of those spaces and start calculating?
View Replies!
View Related
Providing A Start And Finish Cell Into A Range
I need to create a range of cells in Column A. I know the first cell, A2. The final occupied cell will vary. Once I have the range object I would like to step through and analyse each cell in turn using a For/Each loop. The code I have so far is: Public all_structures As Range 'Range required for for/each loop Column Public last_structure As Range 'Last cell in Column Public molcell As Range 'Current cell in range ' Establish range of cells in Column A Set last_structure = Range("A2").End(xlDown) Set all_structures = Range(Range("A2"), Range(last_structure)) *** ' Loop through each structure in turn For Each molcell In all_structures Loop code In here Next molcell When I run I get an error message of "Run-time error '1004': Method 'Range' of object '_Global' failed". It does not like the line marked ***.
View Replies!
View Related
Set Macro For All Worksheets (active Workbook)
Sub display_all_false() With Application .DisplayGridlines = False .DisplayHeadings = False .DisplayOutline = False .DisplayZeros = False .DisplayVerticalScrollBar = False .DisplayWorkbookTabs = False .DisplayFormulaBar = False .DisplayStatusBar = False .ShowWindowsInTaskbar = False .CommandBars("Standard").Visible = False .CommandBars("Formatting").Visible = False .CommandBars("Control Toolbox").Visible = False .CommandBars("Drawing").Visible = False End With End Sub But, when I run the code, seems there're run-time errors detected at these codes: .DisplayGridlines = False .DisplayHeadings = False .DisplayOutline = False .DisplayZeros = False .DisplayVerticalScrollBar = False .DisplayWorkbookTabs = False 1. Is there any way to correct these codes? 2. Does the bolded codes applied to ActiveWindow (Worksheet) only (eg. With ActiveWindow ...)? Can I change it to ActiveWorkbook (perhaps)? 3. Can the command menus (File Edit View Insert Format ...) be hidden also? 4. Does looping method for each worksheet
View Replies!
View Related
Macro Code To Change Active Worksheet
I have a workbook with about 12 worksheets within it. I am trying to input a button on worksheet 3 that when pushed would activate worksheet 12. Basically the same as if you clicked on the tab at the bottom of the screen called worksheet 12. I realise that you have to create a button which Ive done. However I cannot seem to figure out the proper macro code to get the button to change the current worksheet when its pushed.
View Replies!
View Related
Macro To Update Links In Active Sheet Only
I have a workbook which has links to another excel workbook (source). This workbook has many sheets -all exact copy- with different names. I changed startup prompt (edit->links) to "dont display the alert and dont update automatic links". Then I recorded a macro for updating links (from source) and assigned this macro to a button. What I want to do is when I click this update button I want links to be updated only on the active sheet that Im on. My problem is, when I press this button, it updates all links including other sheets (basically whole workbook). My current macro is (I dont know coding but I tried changing ActiveWorkbook to ActiveSheet but it didnt work): Sub update() ActiveWorkbook.UpdateLink Name:= _ "C:Documents and SettingsAlperDesktopExcelsource.xls", Type _ :=xlExcelLinks End Sub
View Replies!
View Related
Dynamic Range. Start & End Cell Not Known
I would like to create a dynamic range of numeric type in a single column. Only the precise position of one middle cell is known, let's say $A$20, but the range is supposed to extend above and below $A$20 and to finally include all adjunctive, positive and negative numbers in that very column. Having read the ozgrid-resources on dynamic ranges let me experiment with the following line, however, it seems to include all entries in the column disregarding the format type or the fact that they should all be adjunctive (meaning that wherever there's a text entry it should be seen as the natural end of it): ....
View Replies!
View Related
Find Method To Search For The Active And Non Active Values
I have a range of amounts in Sheet 1 from F7:Q13 and im using the find method to search for the active and non active values in the cell. Which means that if there's a value in the cell it will transfer the value in Sheet 2, if nothing is found in the cell the cells in Sheet 2 will return as nothing or null. I think the problem lies on the FindWhat variable. Im getting a compiled error which im not sure what is it. I've attached the spreadsheet so you get a better idea of the problem that i encountered.
View Replies!
View Related
Macro: Process The Cells For Every Worksheet In A Book Rather Than Just The Active One
I need to get this macro to process the cells for every worksheet in a book rather than just the active one Public Sub test() Dim Lr As Long, i As Long, x As Range, _ v1 As String, v2 As String, v3 As String Set x = ActiveSheet.Cells.Find("*", searchdirection:=xlPrevious) If x Is Nothing Then Exit Sub Lr = x.Row Application.ScreenUpdating = False For i = Lr To 1 Step -1 v1 = Cells(i, 2) v2 = Mid(Cells(i, 3), 1, 1) v3 = Cells(i, 4) If v1 "OP00" Or v2 "L" Or v3 "CC" Then Cells(i, 1).EntireRow.Delete Next Application.ScreenUpdating = True End Sub
View Replies!
View Related
Advanced Filter Active Sheet Macro Code
the macro mentioned below has been assigned to a combo-box form. I have 2 different datasets in the same sheet, they have the same headers (but named differently, myhead and myhead1) and the same adv filter criteria range (named as "dcrit") is applicable to both datasets. So, if an item is selected from the combo-box, both the datasets should get filtered according to same criteria. how i can combine the 2 IF LOOPS mentioned in the code? Sub myfilt() Application. ScreenUpdating = False If ActiveSheet.FilterMode Then ActiveSheet.ShowAllData If Not (Range("indsignal")) Or Not (Range("countsignal")) Then Range(Range("myhead"), Range("myhead").Offset(1, 0).End(xlDown)).AdvancedFilter _ Action:=xlFilterInPlace, CriteriaRange:=Range("dcrit"), Unique:=False End If If Not (Range("indsignal")) Or Not (Range("countsignal")) Then Range(Range("myhead1"), Range("myhead1").Offset(1, 0).End(xlDown)).AdvancedFilter _ Action:=xlFilterInPlace, CriteriaRange:=Range("dcrit"), Unique:=False End If Application.CutCopyMode = False Application.ScreenUpdating = True End Sub
View Replies!
View Related
Macro Code Only Works If Specific Worksheet Active
I have searched the FAQ's but have not found a suitable answer to my problem. I have some code that works perfectly when it is run from the VB Editor but when I put it behind a command button it gives me an error almost straight away. I have read that when a command button is used the command button defaults the active sheet to the one that it is one therefore you always have to specify the active sheet but I have done this so am still confused as to why it is falling over. Below is my code, I have commented where it is tripping: Sub FormattingAcutalReport() Workbooks.Open Filename:="H:Risk ReportingDaily TemplatesMF Consolidated Risk DAILY LIVE DATA FROM BO.xls" Workbooks.Open Filename:="H:Risk ReportingDaily TemplatesDaily Non Banks LIVE.xls" Dim myBorders() As Variant, item As Variant Set SEGNSEG = Workbooks("Todays Reports.xls").Worksheets("Seg and Non Seg Bank Summary")............................
View Replies!
View Related
|
TRACKER
