If Active Cell Is Empty Then Run Macro?
May 22, 2014My code and see why it's not executing properly?
[Code] .......
ADVERTISEMENT
VBA Check If Active Cell Is Empty
Jun 14, 2014I'm not sure why I can't get this to work.
I need to abort the macro if the active cell is empty.
I've tried:
If ActiveCell.Value = "" Then Exit Sub
and
If IsEmpty(ActiveCell) Then Exit Sub
but neither work. I've found other solutions that test for a particular cell (A1 for example), but I need to be able to test the active cell, which may be any cell on the worksheet.
ACtiveCell.row: Active Row Is Empty
Jun 9, 2007I am trying to write a statement that sees if the the row below the active row is empty.
I have written the following but it is wrong. Please can someone correct it for me? Thanks!
If IsEmpty(ActiveCell.Row.Offset(1, 0)) = False Then
MsgBox "Not Empty"
End If
Macro With Reference To Active Chart On Active Sheet
May 14, 2014I currently have the following macro running to set a chart's data values:
Sub C3Quarter12013()
'
' C3Quarter32013 Macro
'
'
ActiveSheet.ChartObjects("Chart 2").Activate
ActiveChart.PlotArea.Select
ActiveChart.SeriesCollection(1).Values = _
[Code] ......
When I copy the tab and change some of the data within the cells, I want the macro refer to the chart on the current tab and the values in the current tab - as currently it refers to only "Chart 2" and the values in the tab 'Figure 2 - WE OPH'.
I've tried changing the sheet name to ActiveSheet.name but that doesn't seem to work.
Macro To Select The Row That The Active Cell Is In
Aug 21, 2009Using vba how do I tell a macro to select the row that the active cell is in?
I'm just using a basic delete Row macro but I'd like for the macro to automatically select the entire row when it's time to delete instead of me highlighting the section.
Enter Active Cell With Macro
Dec 20, 2013Is there a way a person can enter the active cell and have the cursor go to the upper left part of the cell and enter the current date and remain in that cell for additional data? More often than not there will already be data in the cell but sometimes it will be blank.
View 7 Replies View RelatedReturn To Active Cell After Macro Run
Jul 24, 2007I am using Excel to tabulate scores for my employees. We work in a very busy and open office, so there is a need to be able to obfuscate the scores, but also help keep from losing my place while punching the scores.
I would like it to be able to return to the last cell that I was punching a score in...I used "ActiveCell.SpecialCells(xlLastCell).Select". I have also used " x= cells(Rows.count,2).end(xlUP).row" followed by "cells(x+1,2).select", but both with no luck...
Sub Hide_Scores()
Range("B15:EU35").Select
ActiveSheet. Unprotect
With Selection
.HorizontalAlignment = xlCenter
.VerticalAlignment = xlCenter
.WrapText = False
.Orientation = 0
Assign Active Cell In Macro With Dynamic Cell Choice
Dec 29, 2009Before unloading a userform the range to select the active cell is set to
View 3 Replies View RelatedCan A Macro Start From Wherever Cell The Active Cursor Is On
Apr 5, 2006Can a macro start from wherever cell the active cursor is on? or
perhaps from the cell that the macro button is clicked?
What I am trying to do is copy the data from F(whatever) to whatever
the last empty cell is in the row holds the active cursor. Or I can
create buttons for the macro to run, and it could copy the information
in that particular row.
Macro - Moving Active Cell To Column B Of Next Row
Feb 14, 2012I use this macro to open a hyperlink in "column B" of the next row. However, it only works if I begin the macro from "column N" on the line above. (the hyperlink is always located in column B)
I want to be able to run this macro from any cell on the line above. How to modify it?
Code:
Sub Open_Hyperlink()
'
' Open_Hyperlink Macro
'
' Keyboard Shortcut: Ctrl+o
'
[Code]...
HTML Code:
ABCDEFGHIJKLMNO
1ActiveURLWhatDateFirst NameLast NameOtherOther2Other3Street1CityStateZip
2XLinkData112/21/2011BobSmithData2Data3Data4123 MainMooresvilleNC28117
3XLinkData112/22/2011LarryJonesData2bData3Data4456 MainMooresvilleNC28117
4XLinkData112/23/2011MaryAkinData2Data3Data4789 MainMooresvilleNC28117
An example would be to run it while Cell "I2", "J2", or "K2" is selected and have it open "B3"
Excel Macro - Find Active Cell Value
Jul 31, 2012I have a list of names in coloum D of a worksheet called "Trial", I have another worksheets called "Usage" with this list. I need a macro which can search the name written in Trial worksheet in Usage and worksheet, and activate the found results in usage worksheet.
I cannot use vlookup formulae here as "trial" sheet only has last names, which "usage" sheet has full names.
Macro / Change To Run On Active Cell Instead Of Whole Page
Apr 24, 2013 I am still kind of new to using VBA code and my editing skills are very novice at the moment.
How would I change this Code to run on only the active cell selected and that is all, instead of the whole page?
Sub AddIFERROR()
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
Dim xCell As Range
Dim xFormula As String
For Each xCell In Selection
If xCell.HasFormula Then
xFormula = Right(xCell.Formula, Len(xCell.Formula) - 1)
xCell.Formula = "=IFERROR(" & xFormula & ","""")"
[code]....
Macro To Print Active Cell And 6 Rows 4 Col
Mar 18, 2007I have a workbook that need a macro to print current active cell
and the surrounding 6 rows 4 cols.
Also the selection printed need to fit
to page pref landscape on printing
the active cell varies day to
Run-time Error 1004 (founds An Empty Cell The Value For One Cell Is Copied To The Empty Cell)
Feb 26, 2009I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
Only Run Macro When Cell Value Is Empty
Mar 8, 2009I would like to have an alert msg to prompt the user whether he/she wan to proceed to run the macro upon the macro button is pressed. However the alert msg will only pop up if cell value, A1 is not empty. In the alert msg, The user will have an option to choose to run the macro and do not run the macro.
Another question. I have a macro copy some data from other workbooks. I would like to alway return to a worksheet, named"Summary" after the macro is run. any way to do that ?
Macro To Filter Column On The Basis Of Active Cell Value?
Jun 28, 2014I want a macro which can filter the data on the basis of active cell
View 1 Replies View RelatedVBA Macro Code To Copy Cell A1 And Paste In First Empty Cell Down Column D?
Jul 30, 2013Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedExcel 2003 :: Highlight Cell On Same Row As Active.cell Whenever Active.cell Changes
Dec 10, 2012whenever the active cell is within a given range, highlight the cell on the same row in column S (by changing its interior colour). This should occur each time the active cell is changed, whether by cursor keys or mouse. The effect would be similar to the row and column highlights at left and top of the worksheet.
This action should be restricted to one sheet in the workbook.
It's for Excel 2003.
Macro Run Copy Text From Active Cell And Find That Value In Another Sheet
Dec 16, 2008I would like to create macro, where it would on macro run copy text from active cell and find that value in another sheet (in column H) and select that cell.
What I did is this:
Macro To Delete Row If Cell Is Empty
Feb 18, 2010I have a worksheet of approx 13000 rows and want to use a macro to delete a row if a certain cell is empty - is this possible?
View 3 Replies View RelatedMacro To Stop If Cell Is Empty?
May 11, 2012I have the following macro
Code:
Sub del()
Dim myRange As Range
Set myRange = Range("AK3:AL3" & Range("AL" & Rows.Count).End(xlUp).Row)
For i = 1 To myRange.Rows.Count
If myRange(i, 1) >= myRange(i, 2) Then
myRange(i, 1) = ""
myRange(i, 2) = ""
End If
Next i
End Sub
How do I add a condition that will stop the macro if myRange = ""/is empty?
Macro To Find First Empty Cell In Row
Feb 29, 2008I'm looking for a macro that will search through E2:IV2 and take me to the first empty cell in that row.
I've tried a couple of things but none of them seem to do anything.
Macro Find Empty Cell In Row Above
Jun 4, 2007I am trying to write a macro which searches for a certain value (*?CNMT_LBID) in my worksheet, then copies it, plus the two cells to the right of it, to the first empty cell in the row above.
I have got so far, but am now stuck! I am not sure how to specify the row above my current cell, and then find the next blank cell to paste into.
Also, I'm not sure if my code is correct, any corrections are welcome!
Sub Move_Data()
'
Dim i As Integer 'for loop below
Dim rng As Range 'Cell to start 'cut' from
'rng = cell containing "*?CNMT_LBID"
Set rng = .Find(What:="*?CNMT_LBID", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False)
'Loop to cut cells "*?CNMT_LBID" plus next two columns to the right, and place in empty cell in row above
For i = 0 To 2
rng.Offset(0,i).Cut( )
Next
'delete now empty row
rng.Row.Delete
End Sub
Selecting Range From Active Cell To Last Entry In Same Row As Active Cell
Jun 8, 2014 I have got stuck on one piece of my code and having trouble fixing... Overall I am trying to find variable station name in cell L2 of Sheet 2 in Sheet 1 and then select and copy the data from the data in "cell L2 of Sheet 2" to the last entry of that row. I have attached an example test spreadsheet of the data and a macro is within Sheet 1 called test1. Please note that cell L2 in Sheet 2 will always be different station name and the station list in Sheet 1 will change with differing station name.
The code I am using is:
[Code] .....
The code that is not working and bringing up an error is:
[Code] .....
Attached File : Copy of Testexample.xlsm
Excel 2010 :: Macro To Filter Column Based On Active Cell Value?
Feb 25, 2014I work on an excel spreadsheet all day and I'm constantly cuting and pasting a value to filter another column. I would love to have a macro button that would automatically do this.
The job card sheets are labled 'Page 1' through to 'Page 175'. As I am working on each job card sheet I need to filter column on another sheet within the same workbook. This is indicated on the attached picture.
So in a perfect world as I would enter in the PLANT ID number on to any job card, then hit a macro button on the toolbar and the Pole No column would then be filtered by the value in the PLANT ID cell.
As there are multiple job cards the macro would probably need to use the 'active cell' value to filter by. But as you can probably tell I'm no expert so you judge the best way to do it.
MWTS034G22 Job Card Sheet
[URL] .....
Windows 7 (32bit)
MS EXCEL 2010
Macro That Copy Address In Cell And Send Active Sheet To That Email ID
Apr 15, 2014Is it possible for a Macro to read a cell say D:11 and copy that email address and send the active sheet to that email?
View 9 Replies View RelatedMacro To Paste Data To Next Empty Cell?
Dec 13, 2013I want to create a macro to paste some data into the next empty cell. Below is sort of what I need but this show it going to a particular cell, I need it to got to next open cell in the range from say BY3. So next macro run it would copy and paste the data from T3:T9 (always this range) to BZ3 then CA3, CB3 and so on.
[[Sub CopyData()]
'
' CopyData Macro
' Copy The Data To Build Graph
'
[Code]....
Repeat Macro Until Empty Cell Is Reached
May 6, 2014I have the following Macro to transpose data from a column into succesive rows. I need it to repeat, until it has processed all data in column A / until it reaches an empty cell in A.
Sub Macro1()
'
' Macro1 Macro
'
[Code]....
Don't Calculate Row Using Macro And Move To Next Row If Specified Cell Is Empty
Feb 17, 2014The following macro does well at concatenating 2 constant values and the values in columns A and CF and places it in the CP field. What I need to know is is it possible to modify this code so if there is NOT a CF field cell value (that is it is blank) that the formula does not run and moves on to the next row? That is, the CP1 cell remains blank?
View 1 Replies View RelatedUsing A Macro To Paste Format Until An Empty Cell
Nov 27, 2008I would like a macro that will select the 65536th row to be used to paste format from rows 2 to the last empty cell in column a.
View 5 Replies View Related