Having trouble getting Excel to compute a value based on two columns on another sheet. What I need it to do is see if column A has the value I specify, then look in column B and see if that date figure is greater than 180 days, and then count it. So I might have 45 that meet criteria A, but then need to find items in that subset that meet criteria B...
I want to use the countif function for a certain array. The range is set by another cell which is made up out of a percentile of an entire row.
The problem is is that excel doesn't see the value it displays so i continuously get a value of 0 in the countif cell. If i fill in the range by hand, which is exactly the same range as the outcome of the percentile the countif cell does give the correct value.
So in short the problem is i guess that the countif cell does not recognize the value because this value is made up by a formula.
I want to get students positions in a class like 1st, 2nd, 3rd, etc. There can be two 1st position and 2 2nd positions at a time .
1.In G Column I put logic for Fail and Obtained Marks. G2=IF(COUNTIF(B2:F2,">=60")=5,SUM(B2:F2),"Fail") 2. Then i made array formula in column H to get the position ={SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G2))/COUNTIF(G$2:G$7,G$2:G$7&""))+1} Some improvement to write fail & position ={IF(COUNTIF(B3:F3,">=60")5,"Fail",SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G3))/COUNTIF(G$2:G$7,G$2:G$7&""))+1)} And more work to get total marks & position and Fail at the same time...... ={IF(COUNTIF(B2:F2,">=60")5,"Fail",SUM(B2:F2)&"-"&SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G2))/COUNTIF(G$2:G$7,G$2:G$7&""))+1)} Now I wounder that is there a way to do all calculations in column H without using column G
By replacing (if there is any method) G2, G3, G4 etc. with Sum(B2:F2); Sum(B3:F3);Sum(B4:F4) etc. in below formula ={SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G2))/COUNTIF(G$2:G$7,G$2:G$7&""))+1}.....................
I'm having a difficult time returning COUNTIF values for a positive match between 2 columns THAT meet a certain condition. Basically I want to iterate through column A sheet 1 (ONLY for values where column B is paid) and return a count for every instance there is a match of value A sheet 1 in column A sheet 2. In other words, I'm looking to find the number of ids marked as paid from Column A sheet 1 that exist in Column A sheet 2. I don't wish to return the actual ids, just the total count.
I've tried the following but I know there's an error in iterating through Column A the way I have it:
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
I have a spreadsheet that contains a list of dates: What I need is a formula that will count the number of cells that hava a date more than 6 months old. I also would like the field automated so I don't have to change the date manually every day.
=COUNTIF(S5:S593,"<2012/06/18") This formula will give the correct read out, but I must change the date manually.
My attempts at adding a =today() command in place of the date result in 0 being the result (not correct)
This is what I have tried: =COUNTIF(S5:S593,"<"=TODAY()-"183")
i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it in writing so that i accurately describe my problem. attached is my example
my current formula is =COUNTIF('Input Page'!A2:A50000,"=Monday")
i'd like to change it to check what day is in the field and then only do the above formula if that day is within the past week.
so i need the "=Monday" section to be changed to read "(is equal to monday) and (is between today and today-6)" ...todays date will be taken from 'Input Page'!B2:B50000
See attached document, there are 11 cells in which will either contain Yes or No. Looking at the different combinations that there can be there can only ever be 9 out of the 11 cells being used or 10 out of 11 being used.
Also the last question (Row 25) could be filled N/A if this occurs I would like the formula not to count that. Is there a counting formula or IF formula which can be done to help me out?
i have a spreadsheet that acquires data from 42 other worksheet and in a row of cells it has yes or no at the bottom of that row i have =COUNTIF(A2:A34,"YES"). But it will not count the yes' because the cells that it is trying to count all have formulas in them like =tues!A34 or similar is there a different formula i can use to still count the yes' even in a cell containing a formula?
I already have a conditional format which is working OK. I would like to put a formula in the cell so it shows a % so currently it would be 100% as there is 3 cells below showing 3 greens.
Alternativily each colour is worth a value - Green = 1, Amber = 2, Red = 3. So Cell I3 would show 3.
I want to count the number of cells in column B that contain the start with the string US/IL. Here's the formula that I created, but it returns a value of 0 instead of 590.
Is there something I need to do differently when a cell value contains the / character in the string?
=SUM(COUNTIF(B5:B1830,"US/IL"))
Once I have the correct formula for the above, I want to write another formula on the row below that counts how many rows of this 590 value have a corresponding "Yes" value in Column M.
I am using the following formula to calculate the number of responses:
=COUNTIF([Cleanliness of Environment:],"None of the above")
However, I only want the number of cells which contain words other than "None of the above". The formula is counting empty cells. Is there a way to weed out the empty cells and receive a tally of only cells with words other than "None of the above" in them?
It's been awhile since I've used excel formulas so I'm very rusty but I need to count the number of times I see a particular item in a list as long as it has another criteria as well. Example List and Result are below: I want to count the number of AAA Rewards that Alex has....
List #DateEmployeeAmountReward Type 14/17/07Alex$5.00AAA Reward 24/19/07Joe $10.00AAA Reward 34/19/07Alex $5.00 Store Certificate 44/20/07Alex $10.00 AAA Reward
Result Employee # AAA Reward Amount # Store Certificates Amount Alex Brian Joe
I have a sheet with repeated dates for several months and I need to break out data by week and then by certain criteria. I can do 1 or the other but combining the COUNTIF formula and the SUMPRODUCT formula has proven to be beyond me.
What I need to do is have the formula return a sum of all of the fields in colG that are >5 within a date range. Once I find that # I have to divide it by another field and multiply by 100 to get the percent.
I came across this formula but could not for the heck of it understand what exactly does it do. I will really appreciate if some one can make me understand what this formula is intended to do.
=Countif(data,data) where data is the named range..
I have a column of numbers ranging from 0000-9999. They are not in order and multiple numbers are used more than once. I would like to know how many times the numbers in the range of 4000-4999 appear. I am trying to use the formula =COUNTIF(F4:F500,"=4????") or =COUNTIF(F4:F500,"=4*") but neither are working. If I do a single number like this =COUNTIF(F4:F500,"=41420"), it will count them for me.