Capture 2 Values From 2 Different Ranges

Feb 8, 2013

In my sheet, i have a list of machines in cells A2 to A5 & list of Plants in cells B2 to B5 as below

Col A..........Col B
Mach.........Plnt
A...............1
B...............2
C...............3
D...............4

What i want to capture is the last machine selected by clicking and also the value of the last plant selected by clicking
I want the machine last selected (clicked) to be in captured in cell D2 & the Plant last selected (clicked) to be in captured in cell D3.

i.e if i click Machine C in column A then go the column B and click Plant 4

Then D2 cell should show C and D3 should show 4

View 3 Replies


ADVERTISEMENT

Formula To Capture All Values >=50 To <=99 In A Row

Feb 27, 2007

I would like a formula to capture all values >=50 to <=99 in a row.

View 14 Replies View Related

Formula To Capture Values From One Sheet To Another

Nov 30, 2009

I have a spreadsheet that has two tabs that show different views of my report. In tab "Team View" I'd like to capture the information that is in "Cost Centre View" in the fields Nov09 to Oct10.

I want my formula in "Team View" tab to take the TOTAL "Run Rate Reduction" value in "Cost Centre View" ONLY and have the same "Initiative Type" in "Cost Centre View" that align to what is shown in "Team View" in column A (i.e. ISO).

I tried using a SUMPRODUCT but my formula didn't work.

Is there another formula that will give me this calculation?

View 14 Replies View Related

Periodically Capture Cell Values

May 6, 2009

I would like to know how to capture a cell value at a specific date each month in a situation where this cell can change value as it is a formula. For example, the cell returns a percentage that is derived from other data that can change regularly. It may be 45% today, but a user may alter other data in the spreadsheet and it could be 67% tomorrow (or any other percentage).

I want to graph a monthly trend of how this cell value changes by capturing the cells value on the 20th day of every month, or it would also be ok to work on a periodic snapshot of every 30 days.

View 5 Replies View Related

Capture The Averages (of Cells With Values)

Feb 15, 2007

I have a workbook with several sheets , the 1st 31 being named Mar.01-07, Mar.02-07,etc
I'd like to capture the averages(of cells with values) from cells B7:C24 of sheets Mar.01-07 thru Mar.31-07 and place the values in the sheet called "averages" with the average for B7 going to cell B7 in the "average " sheet, B8's average going to cell B8 in the "average" sheet and so on.

View 9 Replies View Related

Capture Values Based On Number Of Columns?

Jun 7, 2012

My data comes from 3 different sources

Source A = 4 columns (3rd one is important)
Source B = 8 columns (3rd one is important)
Source C = 5 columns (4th one is important)

Is there a slick way to capture values based on the number of columns in that row?

View 1 Replies View Related

Capture & Store Frequently Changing Values

Dec 9, 2006

I am useing Excel 2003 and OPC server client for excel, and i am monitoring 6 values, that are changeing each second. I was trying to make a function to collect this information, so i could form a statistic table, but unfortunally with no success.

I can watch how the values are changeing their numbers, but i cant sotre the values in the rows below. Does anyone know how can i do this

View 9 Replies View Related

Capture Unique Values From 1 Column And Populate The Result Into Another Column

Aug 28, 2009

I have values in COlumn A, probably about 50K rows, The total unique values on the column A is only about 27. I need to capture all those unique values and paste them in column B. I didn't want to do "Advance filtering" since the workbook has many macros's on it that the user simply click on. Im thingking of creating a loop and compare values already pasted in Column b but then that will take too much time to complete the loop. Is there any easier or yet more efficient way to accomplish this?.

View 2 Replies View Related

Find Same Values In Different And Unequal Cell Ranges And Refer To Values

Jul 2, 2009

I have data similar as shown in the following:

A1A11
B2AA1122
C3B22
D4C33
D44

The idea is to add compare the cells of the first column with the third column. Where same letters/words exist, the corresponding value of the first column should be added to the second column (where no letter exists equally, the space remains empty), so it will look like this

A111
AA1122
B222
C333
D444

the third column always will have at least the same letters as the first column, but new letters/entries can occur.

View 3 Replies View Related

Finding Values Within Two Ranges

Feb 18, 2013

I have people who wrote down that they attended a location on a certain date at a certain time, and I have their start and end time.

So for example my person data has something like this:

Arrive: 1/1/12 7:00 AM,
Leave: 1/1/12 10:00 AM

Arrive: 1/1/12 3:00 PM
Leave: 1/1/12 4:00 PM

Arrive: 1/4/12 8:00 PM
Leave: 1/4/12 10:15 PM

I also have those fields formatted as text and as decimals so I can work with whatever I need.

The next portion is a list of events that occur at these same locations. Here are some examples.

Event 1
Start: 1/1/12 8:15 AM
End: 1/1/12 12:15 PM

Event 2
Start: 1/4/12 3:00 PM
End 1/4/12 8:30 PM

What I need to find out is if the person was present at the location during any of the events.

A person may write down more than one visit to the location in a day. The events only happen once per day. I'm sure there's a pretty manual way to do this, however the list of people and events spans an entire year and it will be too time consuming to do it that way.

View 2 Replies View Related

Sum The Values If You Have 2 Criteria And 2 Look Up Ranges

Nov 17, 2005

I need a formula that sums the values with 2 different criteria and 2 different look up ranges

View 9 Replies View Related

Assigning Values To Value Ranges?

Jan 4, 2013

Essentially, I'm arranging an excel spreadsheet to organise my ongoing sales and keep record. I would love to have a formula to calculate the appropriate comission for each sale.

The ranges are:

0-199 = 0 Comission
200-499 = 10 Comission
500-999 = 25 Comission
1000+ = 50 Comission

I managed to get the 0, 10 Comission to be processed correctly but sadly I've hit a brick wall as to how to include the 25, 50.

The formula I have so far is as follow: =IF(COUNT(D22),IF(D22

View 2 Replies View Related

Named Ranges Keep Changing Values

Oct 5, 2009

I have two defined ranges, and they keep changing to include the workbook name. XV2 =

View 3 Replies View Related

Max Of The Values In This Column In Two Different Named Ranges

Feb 1, 2010

I have two named ranges, let's call them A and B, each referring to a different single row in a worksheet.

I have another row in which I would like to compute the maximum of the values found in A and B in that column.

=MAX(A,B) gives the maximum value of all the values found over the entire ranges A and B, rather than just those in the current column.

What formula should I use to find the maximum of the values found in range A and range B in the current column?

View 7 Replies View Related

Count Number Of Values In Different Ranges?

Aug 2, 2013

a column contains 'amount'. The amount can be from 1-999999. Some cells also contains #N/A (thr' formula) & blank (thr' formula).

I want to get NUMBERS of 'amount' whose value is
1-10000
10001-20000
20001-30000
30001-40000
40001-50000
50001 and above.

View 5 Replies View Related

Selecting Top 5 Values From Multiple Ranges

Jan 30, 2008

I have four ranges of data in a worksheet that are sorted in order by the value in the final columns. Based on this value I would like to flag the highest five values from all ranges by adding a value in the adjacent cell. Is there a formula/function that I can use to identify the highest values from a number of data ranges?

View 9 Replies View Related

Summing Values Between A Date Ranges

Feb 26, 2008

I need to sum a value that falls between 2 date ranges. I have read a few posts on this subject and thought I had it working, but I realized I was getting values in fields I should not be.

=SUMPRODUCT((Details!H2:H100>=$E$4)*(Details!H2:H100

View 9 Replies View Related

Values In Ranges As Criteria For Formatting

Mar 11, 2008

I have a spreadsheet where my dropdown menu is taken from a master list. The master list is also broken down into several catagory specific lists.

I need a macro that will take the individual cells in the worksheet that use the master drop down list, check them against the contents of the specific lists (defined names) and assign a cell color fill based on wich list the data was found in.

lets say my master list is:

MASTERLIST
apple
orange
bananna
lemon
pork chop
sirloin
chicken wings
carrot
potato
onion
sage
thyme.............

View 9 Replies View Related

Pass Values Between Two Non Contiguous Ranges

Nov 20, 2008

I have Workbooks("A") and Workbooks("B") open.

Workbooks("A") contains Sheets("Sheet1"). Range("mySource").
Workbooks("B") contains Sheets("Sheet1").Range("myTarget").

Both ranges have been created by joining multiple ranges, in this way:

Union(Range("C1:C13"), Range("K1:K2"), Range("K5:K9"), Range("K14"), Range("Q6"), _
Range("I18"), Range("B20:P20"), Range("B24"), Range("C26:E26"), Range("C29"), _
Range("B34:B40"), Range("B44:Q50")).Name = "mySource" 'or "myTarget"

So: both ranges contain the same number of cells with the same addresses, and they have been added in the same order. However, if now I try to pass all values from mySource to myTarget, in this way:

Workbooks("B").Sheets("Sheet1").Range("myTarget").Value = _
Workbooks("A").Sheets("Sheet1").Range("mySource").Value

the result is a complete mess. Only the first "subrange" of mySource ("C1:C13") is passed to myTarget, and pasted in each of its "subranges", sometimes by rows and sometimes by columns...

View 2 Replies View Related

Replace Different Values Within Non-Contiguous Ranges

May 8, 2008

I had some code working fine in office 2003:

Sub Replacing()
Dim rRange As Range
Dim lArea As Long
Dim Co As Byte
Dim NaCo As Byte
NaCo = 99
Set rRange = Range("B:C,E:F,H:I")
With rRange
For lArea = 1 To .Areas.Count
With .Areas(lArea)
Co = Choose(lArea, 1, 2, 3)
.Replace What:=Co, Replacement:=NaCo, LookAt:=xlWhole, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
End With
Next lArea
End With
End Sub

the problem is that it's not working for Office 2000

View 2 Replies View Related

Replace Same Value Within Non-Contiguous Ranges With Different Values

May 18, 2008

This time I want to replace:
number "99" in range("B:C") to number "1";
number "99" in range("E:F") to number "2";
number "99" in range("H:I") to number "3";

Sub Replacing()
Dim rRange As Range
Dim lArea As Long
Dim Co As Byte
Dim NaCo As Byte
NaCo = 99
Set rRange = Range("B:C,E:F,H:I")
With rRange
For lArea = 1 To .Areas.Count
With .Areas(lArea)
Co = Choose(lArea, 1, 2, 3)
.Replace What:=Co, Replacement:=NaCo, LookAt:=xlWhole, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
End With
Next lArea
End With
End Sub

View 2 Replies View Related

Return Multiple Values (Concatenate) From Ranges

Jul 30, 2014

I've made a "Budget Calendar" so to speak.., with my bills on the first sheet, and the Months in the following sheets. What I'm trying to do is say, for instance, the day is the 11th on the calendar, (there are two bills due on this day), and I have the bill scheduled to be on the 11th, can I use a formula to return what bills are due?

On the "Bill Dates" sheet, you can see where I'm kind of going with this...

On the August calendar, under the 11th, I want it to say "Internet, gas (utility)" in cell D20, or "Internet" and "gas (utility)" in D20&21, respectively.

I can get E20 to return the total bills due for the day using "=VLOOKUP("11th",'Bill Dates'!$B$2:$D$395,3,FALSE)", and it'd be awesome if I could get it to return them in different rows as well.

Finance Calendar.xlsx

View 3 Replies View Related

Ranges, Column And Changing Values Automatically

Oct 14, 2008

I m trying to get around here within the company I work for.

I'm interested to know how to set a specific range value e.g. "5 to 10" once a value is between those 2 numbers, and then if the value in the next row below is 34.12 it will be "30 to 35".

Here's an example code I constructed, but the darn thing just keeps on running

View 4 Replies View Related

Counting Cells With Certain Date Ranges As Values

May 3, 2006

I need to count cells withdates in theme in a column. So that would be a CountA function; but only if the values in the cells are within a certain date range, a COUNTIF function. Here's what I thought:

=COUNTIF('All Employees'!O1351:O1364,">12/31/05,<2/1/06")

It returns a zero, which I know is not correct, as I checked it on a smaller sample....

View 13 Replies View Related

How To Generate Missing Values Between Two Different Number Ranges

Apr 26, 2012

Monthly I am sent a spreadsheet detailing cost centre approval ranges for our management team. Unfortunately, the data provided shows a low range and high range in two different columns. Is their a formula to automatically generate the values for the missing numbers

For example
columns A
1001
&
columns B 1007

Can excel automatically generate the 1002, 1003, 1004, 1005 & 1006

View 3 Replies View Related

Create Range From Values That Don't Intersect Two Ranges

Nov 1, 2013

I have two ranges(range1 and range2) and i would like to create a third range(range3 that i have defined already) based on the values that dont intersect between range1 and range2. Below is what i have so far.

Sub runthrough()
Dim rng As Range
Range("range3").Clear

[Code]....

View 3 Replies View Related

Duplicate Values Per Column With Various Row Ranges For Many Columns

Dec 13, 2013

I have a challenge related to a excel sheet we are using for personnel planning.

Vertically we have several projects with action items listed row by row in the following format:

- Project 1 xxxxxx
Project management
Project Engineering
Workshop
Shipping
Etc.
- Project 2 xxxxxx
Project management
Project Engineering
Workshop
Shipping
Etc.

Horisontaly on the columns we have dates, day by day for a year +

For each day we chose from a drop down who is assigned to the action item. The problem is when there are 30-40 + projects and each have 20-30 lines of ation items it is hard to get the overview and avoid double entry. I would use conditional formating to do this, but firstly each project is separated by a line containing different formulas and I would not like the conditional formation to change these cells, and at the same time to put this up manually for each row would take a long time since there are 365 + rows.

how a VBA code could solve this little challenge? IT would also be beneficial to have it do the check upon cell change, that way we would not need to manually run the VBA to check.

View 4 Replies View Related

Load Array With Values From Non-contiguous Ranges

Aug 2, 2014

I have tried:

Code:
With Sheet1
x = .[b7:i16,b19:i23,b27:i32].Value
But that only loads the first range (.[b7:i16]).

This does work:

Code:
.[b7:i16,b19:i23,b27:i32].Copy .[z1]: x = .[z1:ag21]: .[z1:ag21].Clear

I would rather avoid having to copy/paste, load the array, then clear. Is there a way to load the array directly?

View 2 Replies View Related

Summing Values Based On Date Ranges

Nov 6, 2008

summing monthly values based on different date ranges. For example if I have multiple contracts with different start and end dates and based on those date ranges, I want to sum the respective monthly production totals, how would I do that in a formula. I started to set up the table to include "start date month" and "# of months in contract". Is there a way to sum based on the start month and # of months in contract.

For example if hte contract started in Jan08 and ends in May08, the calculation would start with month "1" and sum over 4 months.

Here is an example: ....

View 9 Replies View Related

Paste Special Values And Formats WITHOUT Named Ranges

Feb 14, 2013

For some reason the following code, when executed, pulls a named range from the source workbook (sProj_Name). I feel like I have used this exact same code before and not encountered this issue. This named range is linked to the source workbook so if I save the file and re-open I get the wonderful 'would you like to update links' pop up. I cant figure out why, when I am forcing it to paste only values and formats, it is picking up this named range. In addition the source workbook has way more than one named range, so why it doesn't pull all instead of just one is a mystery to me as well.

VB:
With Workbooks(sProj_Name).Worksheets(2)
.Cells.Copy
Sheet2.Cells(1, 1).PasteSpecial Paste:=xlPasteValues
Sheet2.Cells(1, 1).PasteSpecial Paste:=xlFormats
Application.CutCopyMode = False
End With

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved