Cell A41 Is What Percentage Of Cell A42?
Apr 10, 2014
Cell A42 is a counta total of cells with values in column A
Cell A41 is a count of those cells which have changed. (manual changes)
I want to know what percentage of the total number of cells have been updated
Basically: Cell A42 is what percentage of Cell A41
View 3 Replies
ADVERTISEMENT
Jan 19, 2009
If a cell is not blank, then increase that amount by a percentage identified in another cell and display the value only without any formalas in a new cell. To this end I wrote this IF statement:
=IF(I2>0,CP9=(CA9*I2/100)+CA9,CP9="")
Observation: I see a FALSE in CS9 where this IF statement exists, however, CP9 does not display the required value.
View 8 Replies
View Related
Apr 3, 2013
I have a workbook that I've built for a project. I've attached a sample workbook. What I'm trying to do, for the entire sheet or workbook if possible, is turn any Cell with a percentage of 30% to 49% yellow and any cell with a percentage of 50% or more Red. I would also like to move the ID's of the variable cells, for example Id number 9922, to the cells beside the description of the rows, Affected would be an example, if the information contained in the same row as the ID meets with a set of variables.
For example I only want the ID's moved if they correspond with IDsub 1-25. One more thing, the people who will be using this spreadsheet will be copying data from a website when it is imported it does not insert the values as numbers. I would like to format the cells, in example workbook they would be any of the cells labeled ID IDsub Variable or Number, so that anything put in that cell will automatically be converted to a number.
I should also probably add that the formatting will be done on approximately 80 rows a sheet with 47 sheets.
View 2 Replies
View Related
Apr 8, 2014
How do I have cell A1 display 20% of cell B1?
View 3 Replies
View Related
Dec 16, 2013
The cell I am referencing value is 100,000
I need to take two percentages off of that number. First 50%, then 37% and have the value in a SINGLE cell.
Because 100,000/1.87 is not the same thing....of course.
View 11 Replies
View Related
Jun 26, 2006
Is there any way to make a cell display both a raw number and a parenthetical representing a percentage based on a formula? I know this may sound strange.
Examples:
9 (25%)
12 (39%)
I could get it done via merging or =_&_ style entries, I know, but is there any other way?
View 2 Replies
View Related
May 2, 2012
I need a formula that can work out a percentage increase or decrease from cell J2 to L2.
J2 is the current data with L2 being the previous data - so the formula would compare J2 with L2 and tell me if there is an increase or decrease shown as a percentage.
The figures fluctuate from month to month so they could be either an increase or decrease. There are over 300 entries so I can't go through each one adjusting the formula accordingly - this is why I need the formula to do the working out if it is up or down.
View 7 Replies
View Related
Jun 25, 2012
I would like to display the zero percent (0.00%) value in a single cell on a worksheet. Typically, there will be a positive value input in the cell such as 3.50% but occasionally it will require a zero value. When I type the zero value, the cell is displays a blank. I do not want to show zero values on the remainder of the worksheet.
View 2 Replies
View Related
Oct 1, 2013
here is the formula I am using. =IF(A5 < =Schedule!$K$9,100%,0%) We only track complete and not complete....so my formula above just comes out to 100% or 0%. What I am wandering is if I can add a modifier so that it can be adjusted w/o just over writing the formula. Ok so my vision is, the formula above is in cell B5.....next to it in cell C5 I would like a modifier so that if that amount should really be 85%. I can type 85% in C5 and it will change B5 to 85%. So I guess the formula would be more like =IF((A5 < =Schedule!$K$9,100%,0%),or = C5))
View 2 Replies
View Related
Aug 26, 2007
I have various textboxes and they are entering values onto my sheet on my command.
If i say, enter 10 into a textbox, meaning 10%, on my spreadsheet it comes out as 1000% I thought about being clever and putting
range("a1") = textbox1.value / 100
but this brings up an error with the debugger!
View 6 Replies
View Related
Jun 5, 2008
I know for some of you this will be pretty simple but im having trouble figuring it out. Attached is a shortened version of what i am trying to do. I want the Percent Attendance column to represent the cumulative percentage(hope I used the correct phrase). So for Person 1, it should currently say 100%, person 2 it should say 66.67% and so on. There are 5 days that i want to get the percentage, but because we haven't gotten to 2 of them yet, using a regular sum formula for the entire five days gives me the wrong values.
View 2 Replies
View Related
May 23, 2013
I am trying to add 2 cell values together then show the total as a % of a value in a 3rd cell, however I also need it to allow for 0 values in the chosen cells without displaying an error message or it messes up the average formula elsewhere on the sheet?
View 2 Replies
View Related
Jan 8, 2009
Good afternoon Gentlemen, I have a column of data, with a varying number of percentage values that add up to 100%, separated by "NA", i.e.
33%
33%
33%
NA
25%
25%
25%
25%
NA
100%
NA
20%
20%
20%
20%
20%
NA
Now... when I change one of the values I would like the others to even up, i.e. in the last example if I change a 20% to 50% I would like the others to change to 10%... any ideas?
View 11 Replies
View Related
Jan 27, 2010
How would I write a formula that takes cell values from six worksheets and adds them up as a percentage (quarterly updates)? I realize this is wrong, but here's what I'd tried (for three sheets).
=+SUM(IF(EVH!F7="Y",25,0)+IF(FUN!F7="Y",25,0)+IF(HES!F7="Y",25,0))/3
View 9 Replies
View Related
Sep 15, 2007
I have a rather large report full of data, 10+ columns contain a RANKING column, and these ranks, 1-10, are assigned by a % bracket:
1-20% = 1
21-40% = 2
41-60% = 3
61-80% = 4
81-100% = 5
101-120% = 6
121-140% = 7
141-160% = 8
161-180% = 9
181-200% = 10
There are several hundred rows in each column that all need individual ranks. My first thought is to program a if then else statement for 1 to 10 with a % limit range, but this isnt feasable as i would have to program a separate if statement for each of the many hundred rows, or do one heck of a fancy loop that i just cant contemplate (as the rows are split and sepperated... no solid uniform place for the data to be plugged.) What is the best way to go about this? I'm at a total loss of ideas with my knowledge of excel.
View 2 Replies
View Related
Aug 6, 2008
I have a DDE linked cell that is constantly updating (cell A1), I want then to have a cell (cell B1) that changes only when cell A1 differs from value currently in B1 by a certain percentage, then check B1 for the same tolerance level against A1, and repeat. I can do this in a number of ways in VB, however when VB code is running causes the DDE link not to update and since the update is constant I cannot use selectionChange and Change VB Worksheet function result in the same error.
View 6 Replies
View Related
Jun 25, 2012
My Excel 2007 worksheet contains a cell where a percentage is manually input. A freight cost is calculated based on the input percentage. Typically, the percentage is 3-7% but once in a while freight is excluded and the percentage is zero.
My issue is that when a 0 is input the cell appears blank and I would like it to display 0.00%. The remainder of the worksheet needs to have the zero display turned off.
View 3 Replies
View Related
Feb 21, 2007
Im currently studying for an ICT A level and im in my first year doing AS. Im working the AQA board and i have a project that i have a target for an A! I need to create a system for a business and write a report on everything i did...wont go into detail. Anyway. i am having trouble with an IF FUNCTION!!! I have a cell (E35) that contains a percentage.
I want the IF function to display a message depending on what the percentage in cell E35 shows;
IF, 0>> Display "Bad"
40>> Display "OK"
70>> "Good"
90>> Display "Very Good"
E35>=100 >>>> Display "Excellent"
I have tried so many things and I was so sure i entered it correctly, but it keeps coming up with an error.
View 9 Replies
View Related
May 2, 2007
I have a spreadsheet with several columns that have percentages as a whole number and with a decimal format. I need assign a score value to the cell that contains a percentage depending on a range.
For example:
If cell A1 has a value between 97%-100% then A2 should display "15", however if A1 has a value of 90%-96% then it should display "12" and if A1 has a value of less than 89% then it should display "0".
View 9 Replies
View Related
Apr 22, 2014
I have a spread sheet with various tick boxes, that when ticked calculate an accumulative percentage in a cell. This cell is the basis of my graph.
E.g. if the cell displays 80% - the chart with show 80% - simple.
However, I want to write a vba code that changes the fill colour of the chart depending on the percentage.
i.e. if the percentage data = 0-49% I wish the chart to display as red. 50-69% - yellow and 70%+ = green.
View 2 Replies
View Related
Jan 28, 2013
I have the following table in excel:
Price: Percentage:
$150 10%
$100 12%
$50 14%
I'm trying to use the percentage depending on what price I enter in a cell. For example; if I enter $135 then 10% will be used, if I enter $65 then 12% will be used, and if I enter $47 then 14% will be used.
View 3 Replies
View Related
Apr 5, 2014
I have a daily report that gives a percentage based on what is typed into the "Supplier" and "Total Sales" columns but I'm having trouble writing the following formulas since my excel knowledge is relatively low.
1. Where a cell in the "Supplier" column says anything but "Den", "Burrowed" or "Studio Nyx" I need the "60%" and "40%" columns filled with the relevant formula (=B11*60% for example) and the "100%" column blank.
2. Additionally, if the cell contains "Den", "Burrowed" or "Studio Nyx" I need the "100%" column filled and the "60%" and "40%" blank.
View 6 Replies
View Related
Jan 26, 2006
I need to match data in cell A to cell B and then if they equal I need to copy the adjacent cell C to cell X . How do I set up a macro to do this automatically? I have over 5000 cells to compare and match up.. I have Office 2003.
View 7 Replies
View Related
Apr 26, 2013
calculating the percentage of a percentage and writing the formula for excel.
There are 295 people in a room, of the 295, 75 or 25% are mothers. (I know how to calculate 25% - 75/295 = 25.42) of the 75 mothers 35 have 3 children, 32 have 2 children and 10 have 1 child.
35 is what percent of 25%
32 is what percent of 25%
10 is what percent of 25%
View 3 Replies
View Related
Aug 16, 2013
I'm wondering if it is at all possible to have a cell comment automatically update depending on what data is input in the cell (via user input, VLOOKUP, etc.)?
For example, if cell A1 contains the text "CHARLES" with a comment saying "Employee of the Month", and is then subsequently updated with the new text "JOHN" (again, via direct input, a VLOOKUP, data validation, etc.) is there a way to have the comment automatically update to say something else, such as "Team Lead" for example?
I've considered using VBA to accomplish my goal, but am unsure how to compose an effective code to do so. I've also considered perhaps creating a named table filled with all the different comment possibilities I would like to have used in this cell and then inputting a formula in either cell A1, or the comment contained therein, that would then call the corresponding text from that table based on the data in cell A1. Honestly, I'm not sure that what I'm trying to do is even possible;
View 4 Replies
View Related
Dec 12, 2012
i want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies
View Related
Apr 18, 2013
When I use the mouse pointer to select a cell I can't use the arrow keys to move to another cell while the pointer is over the cell and I can't edit the cell while the pointer is over the cell. If I move the pointer away from the cell then I can move around and edit as normal therefore I don't think this is a scroll lock issue.
This issue also happens when I select a tab. If I select a tab and then leave the pointer over the tab I selected then I can't use the arrow keys to move around the worksheet or edit a cell; if I move the pointer away from the cell then I can move around and edit as normal.
I am using MS Excel 2010.
View 1 Replies
View Related
May 6, 2013
I would like to add a date to one cell (say A6) and have this do two things:
#1) this would add "Closed" to a given cell such a A5.
#2) and this would add a color to a group of cells like A1 through A8.
View 4 Replies
View Related
Sep 24, 2013
I have one column that contains a monetary amount (column AQ) , and another that contains text reading either "inflows" or "outflows" (column AC)
When AC says "inflows", AQ should be positive, and when AC says "Outflows", AQ should be negative.
I need the text in column AQ (the monetary amount) to become red when the the opposite is true.
i.e. When AQ is negative and AC says "Inflows", AQ should become red. And when AQ is positive and AC says "Outflows", AQ should become red.
View 2 Replies
View Related
Jun 19, 2008
I have 2 problems relating to LOOKUP.
Not sure if Excel can perform these calculations as they could get to complex.
Problem 1
Can it be possible to have excel look at data from one cell reference another cell then display the results from the cell next to it in another cell, sort of example:
Tab 1 (Never changes)
AB
Bob1
Jon2
Fred3
Tab 2 (Dynamic, changes each week)
AB
Jon
Fred
Bob
So it would work as follows.
Tab2 column B will take Tab2 column A’s data check Tab1 column A and display Tab1 column B’s result.
Problem 2
Weekly league rank table that shows position movements week by week
Example.
Week1
1Jon
2Bob
3Fred
Week2
1FredUp 2
2BobNot Moved
3JonDown 2
Can Excel calculate/show the actual movements of league positions?
View 9 Replies
View Related