My Excel 2007 worksheet contains a cell where a percentage is manually input. A freight cost is calculated based on the input percentage. Typically, the percentage is 3-7% but once in a while freight is excluded and the percentage is zero.
My issue is that when a 0 is input the cell appears blank and I would like it to display 0.00%. The remainder of the worksheet needs to have the zero display turned off.
I've got problem with combining 3 cells into one. First cell contains text, second have date yyyy-mm-dd and last one is as previous. I'm using formula .
[Code] .....
And I'm getting: TEXT_41694_41701. How can that be corrected to use formatting for date format to get TEXT_yyyy-mm-dd_yyyy-mm-dd?
Column A & B has a list of Supplier Part numbers and Buyer Part numbers as below.
Supplier P/N
Buyer P/N
HGFYE/12
111111
HYEYDH/14
222222
[Code] ..........
Cell D2 is an open cell that any data can be entered into as a search term. What I am trying to do is search for a Supplier P/N that have the characters "H", "G" or "E" in it, so entering "HGE" into cell D2 would display the results into columns F & G as below.
Supplier P/N
Buyer P/N
HGFYE/12
111111
HDGTEY/56
333333
I can easily do a formula for 1 character or a string of characters.
To complicate it further, if the search term has in this example has "YFF", I would like the same formula/code to workout that the result in F & G should show this time
Supplier P/N
Buyer P/N
YHDHFF/58
555555
I am using Windows 7 and Excel 2007.
I would like to display the zero percent (0.00%) value in a single cell on a worksheet. Typically, there will be a positive value input in the cell such as 3.50% but occasionally it will require a zero value. When I type the zero value, the cell is displays a blank. I do not want to show zero values on the remainder of the worksheet.
View 2 Replies View RelatedI'm having an issue getting the correct results from a calculated field in a pivot table in Excel 2007.
In column A I have "Business Name", in B I have a sum of the amount of lines a customer has, and C is a MAX of the number of employees the customer has at their location.
In one example I have a business with sum 50 lines and max 30 employees but when I try to make the calculated field 50/30 (should equal 166%) i get 9.2% instead.
The reason appears to be because there are 18 types of lines the customer has and 18 x max 30 = 540 and 50/540 is 9.2%. In the attached example it's all the same business location so the total number of employees (30) is the same for each row and each row in the raw data is a set of lines with similar features.
I attached an example. CalcFieldProblem.xlsx
how to make a % of running total in pivot tables in excel 2007. the running total in is only available not the "%".
View 1 Replies View RelatedI am trying to create a bar chart that changes color based on a percentage range. Any advice on how to do this? I am using Excel 2007, Windows XP, Sharepoint 2010.
View 1 Replies View RelatedI'm trying to make my spreadsheet display over 100% while calculating a long column of entries. Each entry is showing percentage cost per hour of a benchmark of $65.00 per hour. When an entry for example is $51.10 the percentage displays 0.79%, but if the entry is for example $73.89 then the displayed value is 1.14%.
How do I make this display the percentage over the benchmark of 65 as 110, 115 or whatever it calculates out?
Following the tips doesn't allow to remove a character.
I exported email addresses from Outlook and they have the following character ' in front of the email address.
Using Excel 2007.. it says :"check if your search formatting and criteria are defined correctly. If you are sure that matching data exists in this workbook, it may be on a protected worksheet. Excel cannot replace data on a protected worksheet"
So I made a new file, and copied and pasted the cells into the new spreadsheet.. same message.
My set up office 2007 win xp pro ie8
is it possible using vba ideally with a button marked save, to save a single worksheet and name it, in CSV format
Then I would like to be able to do the reverse load a CSV file back in to a work sheet
Expanding upon this
1. Click a command button with caption “save”
2. Take the name of a given sheet, in my case DataToUpLoad and append it with a number to give a sheet name of DataToUpLoad 1 the first time it is save and DataToUpLoad 2 the next time and so on
3. Click another command button with the caption “load” interact with usual dialog box.
My current work around is to copy a sheet open a new work book past the sheet in the save that work book as CSV
The reason this is required is to mate up with the php on the server side
I have a macro that imports text file and puts a comma after each number (alphanumeric also). I have tried to change it to put single quote around the number and comm afterwards.
Text file listing
123
456
789
When I run my marco I get the following
123, 456, 789
which is what I want...
Now I want the same text to have single quotes around the data example:
'123', '456', '789'
All that I have tried to adjust keeps missing single quote at the front end and also missing the single quote at the rear end example: 123', '456', '789
Here is the vba I'm running
Sub GetserialNumbers()
Dim FileNum As Long, PathAndFileName As String, TextFromFile As String
Const Delimiter As String = ", "
[Code].....
Whe I run this I have to select the text file to get. I keep it in my documents as a quick access. I'm using MS VBA 6.5 Excel 2007 Windows 7 Enterprise.
I am trying to reformat the attached doc into one single column, It's a race listing of overseas marathons and I need it to look like this
Event Name
Event Date
City
Country
Entry fee
Website
in date order, one event after the other in a single column so I can flow it into a word doc ready to be designed. I need to apply in Excel (I am using 2007) to get this doc into the required format?!!
Automating Excel from Access, I'm attempting to generate a single sheet workbook and save to a Sharepoint site. This process works fine on my machine (XL2007, XP), but on a coworkers computer (XL2003, XP), the code throws a 1004 error on the save as line. However, the really odd thing is that stepping through the code doesn't throw an error on the coworkers machine.
Here's the sub being ran; the line it errors out on is the first branch in the .saveas block.
Code:
Private Const csSharePointSaveAs = "\sharepoint-us.mycompany.comsitesfinance adminlah blahlah-blahCustomer Publication Tracking.xls"
Private Sub PublishXLtoMOSS()
Dim objXL As Excel.Application 'Object
Dim wb As Excel.workbook 'Object
Dim ws As Excel.Worksheet 'Object
Dim rs As DAO.Recordset
Dim i As Long
'Set objXL = CreateObject("Excel.Application")
[Code] ...........
I am trying to populate a 3 column listbox in a userform from SQL Server via ADO. When the result set consists of more than one record, there is no problem and the data is displayed properly (ie each piece of data is in its appropriate column) eg...
StockCode..........QtyReqd.........JobDeliveryDate
test1...................1................. 01/01/1900
test2...................1..................31/12/1900
test3...................3..................18/02/1900
however when the recordset returns only a single record, the data does not transpose and views as below (ie each piece of data in the record is on a different line in the first column
StockCode...........QtyReqd.........JobDeliveryDate
test1
1
01/01/1900
I am building a rather good size userform. It is getting really lengthy code-wise because I want certain things to be enabled and disabled on the form as they click on certain options.
I know I can hard code the lines but so I am trying to come up with some coding elements where I will not have to add 20+ lines of code for everytime I want to add a new feature.
Here is one of the functions that I have, There is going to be several of these:
Private Sub chkMore2_Click()
If chkMore2 = True Then
cboProtocol2.BackStyle = fmBackStyleOpaque
cboApplication2.BackStyle = fmBackStyleOpaque
txtLowPort2.BackStyle = fmBackStyleOpaque
[Code] .......
So If I click chkMore2 ... all of the 2nd elements will be editable. If I click chkMore3 ... then all of the 3rd elements will be editable, etc. etc.
So I tried to play with this code example:
Private Sub CheckBox1_Click()
If CheckBox1 = True Then
Call Changeit(1, "yes")
Else
Call Changeit(1, "no")
[Code] ........
Excel 2007 does not like the .concatenate element.
I have a company with upto 5 products, and I have created a dropdown box where you select your product.
When I select product 1 i would need info on product 1 , when i select product 2 I need info on product 1 and 2 and continue. so for product 5 -i need info on product 1-5.
I tried to add all info on excel and tried to delete it one by one by deleting rows in excel for products but it does not work.
I have a single column of numerical values that may repeat many times within
the column.
I require a flexible Formula:
Use an Input Cell for the specified and changeable Percentage(s) %.
Column may be filtered so only take into account Visible Filtered Cells.
The Formula will calculate and Return the numerical range of values that fall
between the specified percentage % (using the Input Cell) e.g.; 70%.
The Formula should Return two numeric values: a Start Value and an End Value
NOT necessarily the minimum and maximum per se BUT the MIN and MAX of the
values that appear 70% of the time in the column; therefore, taking into
account Repeat / Duplicate values.
The calculated Results: the two numeric values will be returned to separate
cells on a new Sheet.
I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001
q9002
q9003
q9004
q9005
q9006
etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
(Using Excel 2010)
I Want users to be able to copy a reference number from a an external program into excel, this works well for single cells but the cell I want them to be able to paste the information into is a merged cell and keep getting the "Data on the clipboard is not the same size and shape blah blah error". What I can do to get this information to paste? Is there some VBA that can kinda trick the cell to believe its single or when pasting it unmerges and then remerges again?
View 1 Replies View RelatedI have data in 2 columns as follows:
Col. ACol. B
10 15
10 14
10 15
6 13
12 5
14 8
10 10
13 6
9 14
10 9
Data in Col. A is converted as a line sparkline and data in Col. B is viewed as a Column sparkline.
I wish to view both the sparklines superimposed on each other in the same cell using excel's native sparkline option (not a third party software). Is it possible using some sort of Excel wizardry?
Sample file attached : sparkline.xlsx
Is there a timer function in which i can have a countdown in seconds in a single cell in MS excel?
View 2 Replies View RelatedI'm using Excel 2010 and I'm having troubles displaying hiding my column B if none of the cells of column A contains either "(Quasi Echec)" or "(Quasi Russite)" at least once.
PHP Code: [URL] ......
Below are my 3 attempts.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim c As Range
If Target.Column 1 Then Exit Sub
Application.EnableEvents = False
On Error Resume Next
[Code] ..........
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Sub GetUniquesInColA()
Dim rng As Range
Dim c
If Target.Column 1 Then Exit Sub
On Error Resume Next
[Code] .........
Code:
Option ExplicitPrivate Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim x As Long
Dim LastRow As Long
LastRow = Range("A65536").End(xlUp).Row
[Code] ...........
MS Excel 2010, WinsXP
how to highlight an entire record based on the value of a single cell?
I would like to highlight all records grey where cells in a column = "closed".
I have a worksheet in which i am asking a user to enter manually a number in cell E3. Suppose the user starts with 100, then the next time he is entering in E3 he shoudnt be able to enter 100 nor any number less than 100. I dont have a range for the numbers that the user is going to enter.Therefore countif function does not work. Is there any way that i an store the number taht the user enters first in cell E3 and then use that database to avoid the user from entering the same or a number lesser than that number.????
View 2 Replies View RelatedI work for a UK charity and have a list of funders in an Excel 2007 spreadsheet.
One of the columns refers to the date on which a new application for funding can be made to that particular funder.
In many cases new applications for funding can't be made for 1 or more years since the last application - sometimes as many as 5 years later. How to get a cell to refer to the date that it contains.
For example, say I have in cell A1 "The Acme Funding Organisation" and in cell B1 (i.e. the "Reapply when?" column) a date of 01/04/2013 (British date format, i.e. 1 April 2013) then what I want Excel to do is to look at the date in cell B1 and if that date has been reached to highlight the cell red. That way I'll know that the reapply date has been reached & that a new application can be made.
Assume I have a cell M24 with a formula like
=M10 + $H24 - $I24*0.35
As you can see B10 is a fix reference (due to omitted $) which should NOT be auto-adjusted but be kept.
Now I want to copy the formular to lots of cells below cell M24. therefore I mark cell M24 and click copy in context menu.
Then I drag/expand the blinking cell border to lets say the 20 cells below. As I result I expect e.g. in cell M25 a formula like
=M10 + $H25 - $I25*0.35
Unfortunately I got
=M11 + $H25 - $I25*0.35
So the fix reference is adjusted as well.
How can I tell Excel 2007 to NOT auto-adjust fix references in formulas?
Whenever she clicks on a cell, the cell to the right of it is also selected. When she tries using tab to move to a new cell, she can only move between the two selected cells. Same with using the enter key. As such, it is extremely difficult for her to modify only one cell, since she always has two selected.
The F8 key, as well as Ctrl+F8. However, pressing the F8 key only adds more cells to the autoselection, and Ctrl+F8 allows her to select one cell, but also highlights the cells around it, and when we tried to select other cells, every cell we clicked stayed highlighted.
Additionally, sometimes when she clicks a cell, it will just select that one cell. Click it again, and the problem is back. I haven't been able to determine any patterns to this behavior, and I know there is no problem with the input (the keyboard and mouse are standard-issue in our lab, and we keep them well maintained).
I have a spread sheet and I want to conditionally format rows to be a certain color. That part I'm fine with. But I don't want them to be a set color. I have a "key" of different colored cells that I want to be the fill colors of the formatting. The ultimate goal is that for example the key looked like this
red
blue
yellow
green
then the rows I had would be formatted as red, blue, yellow, and green. But if you were to go into the key and change the first cell from red to purple, then the rows would become formatted as purple, blue, yellow, and green. Obviously I can copy formating by hand using the format painter, but I want it to update automatically.
I have this worksheet with 2 buttons and 2 textboxes.the first button is named search literally to search the items inputted in the textboxes and the second button is clear which clear all the inputted items in the textboxes and the search field. I manage to code those things however I have a main problem. How am I suppose to linked a checkbox with those items?
For example I searched this particular item so the checkbox corresponding to that item must show up in the left most column of it. and if I searched multiple items those checkboxes must show up too. I am having a hard time coding and trying since I am new in vba. I also attached a sample worksheet. I am using excel 2007.
Search.xlsm
how would you do the following in excel 2007:
"SUM numbers within a cell based on unique strings in another cell".
For example, how would i use formula to SUM the following numbers (and only the numbers for david and sam only once), 700+454+50+40+2+129+16
700david
700 david
454john
50buch
40daniel
2sam
2sam
129mike
16steve
