Cell Reference :: Cell Range?
Aug 6, 2006
I have a formula:
=SUMPRODUCT(SUBTOTAL(3,OFFSET(Sheet1!N:N,ROW(Sheet1!N2:N65536) -ROW(Sheet1!N1),0,1)),--(Sheet1!N2:N65536="Dog"))
Calculating the sheet takes forever because of the cell range. Sometime the sheet will have 10 rows other times it will have 10,000 rows, so I put the range N2:N65536. I already have a count of the number of rows in a cell. Can I refer to that cell in the range, for example: N2:N&B1 (where B1 has the number of rows)?
I tried it a ton of ways but can't get it to work.
View 9 Replies
ADVERTISEMENT
Dec 12, 2012
i want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies
View Related
Mar 10, 2013
I have a list of headings and items and I have a set of formulas that work out depending on the heading what items are listed.
Say theres 10 items and the heading starts at C4 and that heading has 10 items, so it puts "C5" as text in G1 and "C15" as text in G2 so i now know my cell range of items
How can i use the text in those cells to put in a formula to call that as a range?
If I use the indirect formula it shows me the value of the cell, but im after using it to reference the cell
View 4 Replies
View Related
Jan 16, 2009
i need to copy a range from one workbook ("weekly data") to another ("Yearly data"). The range to copy is called 'weekly data'. The ranges to paste to are called 'week 1' through to 'week 52' (this is the yearly data sheet). On the yearly sheet there is a cell Po1' that week on week will state the week number ie 'week13', 'week14' etc. code to use this data in 'P1' to tell the macro to copy to the appropriate week. I have attached as far as i got (then failed due to lack of experiance).
presuming that both books are open
HTML windows("weekly data").activate
sheets("weekly transfer").select
range("weekly data").copy
windows("yearly data").activate
'only one sheet in workbook
range ' data from p1 .paste
View 3 Replies
View Related
Oct 21, 2009
I have a workbook with two sheets. The first sheet is the data sheet.
Data Worksheet
A B C D colA colA,B colA,B,C colA,B,C,D
104 20 21 CR10600S 104 10420 1042021 1042021DUS
104 20 21 CR10600SX 104 10420 1042021 1042021DUS
104 20 21 CR10603S 104 10420 1042021 1042021DUS
104 20 21 CR10603SX 104 10420 1042021 1042021DUS
104 20 22 CR49605S 104 10420 1042022 1042022HKZ
104 20 22 CR49605SX 104 10420 1042022 1042022HKZ
104 20 23 CR39601P 104 10420 1042023 1042023SPR
The next sheet is where the magic happens. Separate this worksheet into two sections. The reference section (column A and B) and the entry section (column E-G). Column D is a formula that will concatenate column E-G together. In the entry section any number of combinations can be entered. In the reference section I need to take the style number and reference it back to the data sheet. Then take the possible combinations from that style (column E and greater) and see if any of those combinations exist on the other sheet in column D. If so then say added....otherwise say needed.
"....In Pricing Sheet" is where I am looking to put needed or added or something like it.
A B C D E F G
STYLE …IN PRICING SHEET Concat DEPT MCL SCL STYLE
CR10600S Added 1042021 104 20 21
CR10600SX Added 1042022 104 20 22
CR10603S Added
CR10603SX Added
CR49605S Added
CR49605SX Added
CR39601P Needed
Any ideas on how to do this in formulas and without code? I have tried and looked into index, match, dget and lookup. I just don't think I am finding the right combination of formulas.
View 9 Replies
View Related
Oct 28, 2009
In the attached sheet. Cell C6 represents the concatenation of aspects of a product. I want to know if it is possible to use that cell as the named range (there is a corresponding named range) in a lookup. The lookup gives me the product code.
View 5 Replies
View Related
Mar 5, 2008
Im currently located in Sheet1. I want to reference a cell in Sheet2.Range("B2") using a R1C1 reference.
View 9 Replies
View Related
Jan 12, 2009
I have a variable which contains the column number. How do I then reference a range in VBA using that column number, as opposed to the letter? I know how to convert the number into the letter, but I also know there has to be something more simpler. For instance, a form of the ADDRESS function, but in VBA?
View 9 Replies
View Related
Aug 1, 2008
I have a list of numbers in Column A and in Column B I have a standard Sum formula which sums the adjacent number in Column A and the four numbers before it.
A B
1 =Sum(A1:A5)
3 =Sum(A2:A6)
5 ...
3 ...
5
6
I would like to have a formula which references another cell to define how many rows to sum from the starting cell. So in the above example, the total number of rows which are added together is 5. If I wanted to change all of the SUM formulas to add 6 rows, I would like to be able to change the number in the reference cell to 6 and all of the sum formulas would switch to adding 6 rows.
View 3 Replies
View Related
Dec 22, 2008
I have a loop that executes roughly 7.7 million times when my VBA program runs. Neednless to say it take a long time to run - usually a couple days.
The inner-most loop contains a line of code from way back in my early vba programming days when I knew even less than the small amount I know about programming now (and if you can follow that sentence you might be able to understand some of the spaghetti code I write :-) ).
for k = 1 to n
if Worksheets("Personell").Range("D" & Trim(Str(k))) > dtCompleted then ...
Would it be faster to use this syntax (which I just found out about):
if Worksheets("Personell").Cells(k,4) > dtCompleted then ...
It would cut out 2 functions calls, trim() and str(), so it would be faster, right?
I am almost embarassed to post the Range("D" & Trim(Str(k)) line of code because it looks so convoluted now, but that's how I learned to program, just fumbling through until it ran...
So in short, I just wanted to confirm that the cells() syntax run faster before I spend an hour editing and tested.
View 9 Replies
View Related
Dec 9, 2009
I am writing a function that opens up an external excel document, identifies a string in a certain range and then i also want it to return a cell reference for that string including the number of rows beneath the cell that the string was found in.
View 6 Replies
View Related
Apr 8, 2008
I have a formula which is using named ranges-
=SUMPRODUCT(xxx-30,Ship_30)/SUM(Ship_30)
where Ship_30 name references the following-
='sheet 1'!$C$20:$C$38
The value of 20 is static, the value of 38 is dynamic. Each new time period adds another value (i.e. 39,40,41)
Having to edit each name range reference in the name manager is not acceptable since there is potentially over 30 to edit each month.
I would like to edit a cell which would have contained the value 38 (or C38) with a new value of 39 (or C39) so the range reference would be updated with the new value.
The goal would be to have a couple of rows with the following that could be edited with new values
View 9 Replies
View Related
Sep 18, 2012
I'm working with a very complex financial workbook with over 3,000 named ranges and would like code to replace the named ranges with the cell references and display it in a message box so the user can easily trace the references without removing the named ranges from the formula. There is a lot of code with the named ranges, so actually converting them to cell references is out of the question.
I found this code, but obviously it physically replaces the range names in the cell. Hopefully it can be converted to display it in a text box.
Code:
Sub FixReferencesToCellNames()
Dim c As Range, n As Name
For Each c In Range("A1:IV65536").SpecialCells(xlCellTypeFormulas)
[Code]....
What I am looking for is that a user select a cell that they want to see the references, run the code to see the cell references for that particular cell in a message box.
View 5 Replies
View Related
Nov 14, 2006
In the attached spreadsheet I am trying to always reference the sum column from Qty in Det Est.
This is because the number of roads changes for each project.
I created a dynamic range name surfacing with the following formula:
=offset(qty!$a$1,0,0,counta(qty!$A$A), counta(qty!$1$1)).
My question is what formula do I use to reference the sum column for each row on the Det Est Sheet.
View 4 Replies
View Related
Feb 28, 2008
Is there a way to start match from a relative position?
Say a match I have in column "A" returns 344. Is it possible to start a new match for column "B" from that spot, instead of having it return a match starting at the top?
View 5 Replies
View Related
Jan 8, 2012
How do I change a formula cell reference based on another cell's reference? I'm building a schedule that looks to a task's trigger and adds days based on that relationship. All entries in column "A" will be text and all cells in "B" will be the simple formula "=A2" or "=A3". Due date is calculated by adding the value in "C" to the preceding date in column "D". In the spreadsheet below, the trigger for "Budget set" is "Specs written" with 3 days added to the previous due date.
________A________________B_____________C_________D
1 Task___________Trigger_____________Days_____Due Date
2 Design begins__Proj OK______________10____10-Jan
3 Specs written__Design begins (A2)____5____15-Jan (D2+C3)
4 Budget set_____Specs written (A3)____3____18-Jan (D3+C4)
If the trigger for A4, "Budget set", changed from A3 to A2, is there a way that the formula that determines the due date in D4 could read the trigger cell reference in B4 so that the value in the corresponding row in column "C" is added in the date column?
View 4 Replies
View Related
Nov 7, 2012
If I have two cells and a named range mexico
A1, A2.
A1 contains the string: "mexico"
A2 is the cells that has required data validation (drop down list).
I want A2's validation reference to be dynamic, in the sense that I can it reference it to A1; converting the string "mexico" to a named range mexico
I tried inputting = INDIRECT(A1) into A2
But I lack clarity in my understanding of referencing.
What is the correct procedure here.
View 2 Replies
View Related
Jul 3, 2009
I am preparing a model for a client that runs excel 2003. I need to change the format of a range based on the value in a cell (reference cell) that is outside the range to be reformatted.
Reference cell is a named cell with the value calculated with a Match() function, the only possible values are (1, 2, 3).
I need the VBA code to retrieve the reference cell value and apply one of three formats to the range. I believe the code for that part is something like:
Private Sub Format_Font()
Set vrange = Range("d63:r63")
Set refrange = Names("ind_agentfee").RefersTo
Set refrange = Mid(refrange, 2)
On Error Resume Next
If refrange = 1 Then
With vrange.Font
.Style = "Comma"
.NumberFormat = "_(* #,##0.0_);_(* (#,##0.0);_(* ""-""??_);_(@_)"
Else
If refrange = 2 Then
With vrange.Font
.Style = "Comma"
.NumberFormat = "_(* #,##0_);_(* (#,##0);_(* ""-""??_);_(@_)"
Else
.Style = "Percent"
End If
End Sub
I am having problems getting the proper opening statements and declarations correct and also get an "Else without Then" error with all combination's that I am attempting. I am sure that the code is mess now as I started with a recorded macro then modified it multiple times while researching the web.
View 9 Replies
View Related
Jun 21, 2014
I am building an interactive sheet to profile a number of divisions based on a summary sheet of about 1200 rows and 90 columns of profiling criteria
I have attached an example but essentially:
1. I would like to be able to select from a list a value which would also be a named range title
2. Have the range information transposed into a row
What works:
1. I can transpose the range information when I use the following formula
I used OFFSET(Governance,COLUMN()-MIN(COLUMN(HGovernance)),0)
The problem:
I cant get it to use a cell reference (i.e. When I select Governance out of a Drop down list of Finance, HR, Governance etc). Having to type in "Governance" to bring back governance range information is fine, but not great when I am trying to profile the Finance or HR division as it then becomes too manual.
View 11 Replies
View Related
Aug 20, 2014
I am trying to multiply a range of cells by a cell reference. The cells currently have hard coded values in them. I know with past special you can multiply a range of cells by a copied #. I want a similar function to that just instead of a copied cell its a cell reference. No VBA.
View 5 Replies
View Related
Apr 25, 2014
Let's say I've ended up with the number 8 in Cell D4 for example. Is there a formula that can return the letter "G" (The 8th Column) so I can use it in future cell references ? If so, let's say we store that in Cell B5. How do I now refer to a cell in a chosen Row of that same Column by reference to Cell B5 ? For example if I want to refer to Cell G33 can you refer to this Cell in some form like Cell(Contents of Cell B5;33) ??? Don't want to use R1C1 type references if possible.
View 9 Replies
View Related
Jun 19, 2008
I have 2 problems relating to LOOKUP.
Not sure if Excel can perform these calculations as they could get to complex.
Problem 1
Can it be possible to have excel look at data from one cell reference another cell then display the results from the cell next to it in another cell, sort of example:
Tab 1 (Never changes)
AB
Bob1
Jon2
Fred3
Tab 2 (Dynamic, changes each week)
AB
Jon
Fred
Bob
So it would work as follows.
Tab2 column B will take Tab2 column A’s data check Tab1 column A and display Tab1 column B’s result.
Problem 2
Weekly league rank table that shows position movements week by week
Example.
Week1
1Jon
2Bob
3Fred
Week2
1FredUp 2
2BobNot Moved
3JonDown 2
Can Excel calculate/show the actual movements of league positions?
View 9 Replies
View Related
Mar 11, 2009
I have a table that displays data from another worksheet. This is what the cell reference behind the table look like:
View 2 Replies
View Related
Feb 15, 2010
I have lets say 12 months of data. I have formulas that reference the latest 6 months. When I insert a new column to input a new month, how can I make the formulas include the new months without manually updating them.
EXAMPLE:
12 months of data exist in cells B3:M3 going from B3(oldest) to M3(newest). Formulas reference latest 6 months of data in cells H3:M3. When a new month hits, I insert a column after column M.I would like the formulas to now reference cells I3:N3 which is now the newest 6 months.
View 14 Replies
View Related
Jul 20, 2014
I have a workbook with 1000+ worksheets, all of which have 3-letter names. On a master sheet, I would like to make a query of how many non-empty cells there are on a subsidiary worksheet. This works:
Code:
=COUNTA(ABC!A:A)
What I'd like to do from time to time is input in column A a varying set of 3-letter worksheet names, say
AAB
ABC
CDE
And have a formula in column B that converts this to
=COUNTA(AAB!A:A)
=COUNTA(ABC!A:A)
=COUNTA(CDE!A:A)
I've learned that simply substituting the cell references A1, A2, A3 for AAB, ABC and CDE doesn't work. What do I need to do to achieve this?
View 2 Replies
View Related
Dec 2, 2009
I have a formula (AL15) to determine the address of the last column with a value greater than 1. =COUNTIF(C16:AC16,">=1")+2. I then use this column value to aquire the Absolute row "15" and the determined column=(ADDRESS(15,AL15,4)). This returns to me a Column value and row value that I need to use as a refference. How can I convert this returned value to a reference.
View 2 Replies
View Related
Feb 5, 2010
i am currently using the macro below to import text files into a spreadsheet. Currently, it begins the import in cell A1 which is what I recorded it to do. how do I change the code to begin the import on the active cell?
View 2 Replies
View Related
Feb 22, 2012
Cell C3 has "Joe"
Cell X44 is a VLOOKUP that retrieves "Joe"
Let's say Joe goes on vacation. The workbook user goes in and puts a blue fill in C3. Cell X44 would also need to change automatically.
What's needed to make this happen?
View 1 Replies
View Related
Dec 28, 2013
If C5 refers to the value in cell C100, C6 refers to the value in C110 ten rows below. C7 refers to C120, ten rows below that and so on. Is there a formula that you use within excel (not a macro) that allows me to copy the C7 formula to C8 so that C8 will reference C130?
I have tried using INDIRECT and OFFSET formulas but cannot do it without an absolute reference to a fixed cell, which defeats the purpose, since I can go into C8 and manually change it to =C130, C9 to =C140 etc.
Currently using Excel 2007 at work and Mac Pro at home. Thought about R1C1 reference, but don't even know how to change to that style on my Mac.
View 9 Replies
View Related
Jan 29, 2014
I need to make a cell display the contents of the cell immediately below it, regardless of if there are rows inserted at the referenced row or above or below it on the worksheet. ALSO I need to do this at several additional cell locations down the worksheet. Such as : A1 displays A2, A4 displays A5, A7 displays A8 etc.
Example: I want A1 to display whatever is in the cell immediately below it. In this case A2. I need to be able to insert several rows at row 2 and have whatever new value is now in the A2 position displayed in A1.
After the rows are inserted I need the cell that was in position A4 to continue to display the contents of the cell below it.
I tried using the formula in A1 of: =INDIRECT("A2") and it works good except when I insert the rows my similar formulas below the area where the rows were inserted continue to refer to the specific original cell and not the one positioned now below it.
View 3 Replies
View Related
