some Excel columns (see attachment). A1 is set to =C1 and the formula is dragged down, relatively referencing column C. Column B applies a formula to the values in Column A.
If I go into the formula bar for cells in A and push enter, the spreadsheet shows the correct value and I can then push enter in the adjacent Column B cell to solve. But, how can I get these data to display properly automatically?
I'm trying to plot a function with specific values marked on the X axis (or at least distributed according to the said values). Namely, I have something like this:
And while it does plot the Y's as I want them to be plotted, X'es are just used as labels, which causes 0 and 100 to be equally apart as 933,9 and 944. How can I plot it, then, so that I simply select my desired Y values, their corresponding X values and get the plotted function?
This pivot table is used to track referrals for an employment service, and needs to show monthly totals of referrals, enrolments, cancellations and placements.
I have the referral date as one of the row lables, but it seems that each of the others now only reflectes back to that date rather than the date entered in that value
EG:
5 clients referred in September, One was placed in October, 2 in December and 1 in Jan but the totals for placed are all showing in September rather than the month the clinet was placed.
how I can have the selected item in a dropdownlist also to be shown in another cell? Typing the cell number of the dropdownlist in another cell (f.e. ="dropdownlist cell number)" doesn't seem to do it.
Sub ADORUN_CSM_Reg1() ' Justin SQL Server Connection ' ' FOR THIS CODE TO WORK ' In VBE you need to go Tools References and check Microsoft Active X Data Objects 2.x library '
In the Server_name = "SRVREG1" in red above, i would like it to reference a cell...say A30. How is this done?? so that if im on the worksheet called Title on A30 i type in SRVREG1 and the VBA knows what to do from there.
Attached is a excel file that has a working formula for tracking cashier variances. I edited out names etc.
I added a new cell called Track Back on the employee search sheet.
What I want to do is only show variances for the amount of days back selected in the Track Back cell.
For example if I select the last 30 days, only the last 30 days would show up below in the sheet.
I am not sure if this is even possible based on the forumla that is already on the sheet. I couldn't figure out a way of doing it. But there are a lot of people on here much better with excel than me
Basically a cell might have a number with 3 decimal places
For Example 90.554, and i will format the cell two 2 decimal places. But when i use those cells which are formated to 2 decimal places in a formula it produces results based of all the decimal places in that cell.
Is there a way for the formula to only calculate the results based off of what is shown in the cell? . This is messing up our accounting area by alot of dollars since we sell many items.
I included an example of what i mean in this excel file which should clear up any confusion.
However, the division part only works in the first cell in the column correctly and then does not work in the rest of the column cells correctly. The difference in the code is that the first cell has no "$" in it and the rest of the cells in the column have the "$" in them.
I have a value showing up as #####. When I auotfill the cell to the next on the right, it shows the right value. How do I correct this so it just shows the right value in the first cell?
i type into any cell in row 1 i need the time at that moment to be captured and shown in cell "B". When i type into row 2, the time which i entered the data must be captured into row 2 cell "B".
Columns O,P and Q should show a "Y" if Column N has the percentage (the percentages shown at the top of those three columns) over the value in column D. I hope this makes sense!
******** ******************** ************************************************************************>Microsoft Excel - Team Lead Incentive.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutF3H3N3F4H4N4= CDEFGHIJKLMNOPQ1***WF*Team*Lead*Incentive****As*of*4/5/07***(15%)(20%)(25%)2TeamBase*Team*****Hours******Wk*1Wk1*%Wk*2Wk2*%Wk*3Wk3*%Wk*4Wk4*%*Total$75*$100*$125*32600.25*592.00-1.37%623.753.92%*****2.54%***43388.00*467.5020.49%527.5035.95%*****56.44%***WF* [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
Above is the formula I'm trying to get to work but it's not-a-happenin. It seems like the first IF overides all of the others. Basically I want the first IF to be ignored if column G contains any of the words shown. So basically what I think is happening is that P3 is less than Q1 so it's ignoring the rest of the IFs. Originally my formula worked fine as:
=IF(P4<$Q$1,E4-S4,"Not Changed")
But I realized that i needed a certain category of product ignored. Products are labeled in column G.
I have a sub that is called when the user clicks a button on the form.
The sub takes a few seconds to run, so I have created a userform which contains a single label, which simply says "working ... please wait" in large letters.
A code example is as follows:
[Code] ....
Seems simple enough, but what actually happens is that the PleaseWait userform is displayed, but contains nothing (i.e. blank white - the contents is not being rendered). I'm guessing that I need to call something on the userform to force it to render its contents after the modeless call to show it. How can I do that?
I am trying to re-jig a formula that shows hours worked for a particular day, to showing any absence detail shown for a particular employee. I have the fllowing formula which doesn't work and I'm not sure why. A similiar formula works for me getting basic hours worked etc
My range names are correct and all have the same 'length'. F67 is 09/05/05; StaffNumber = 100 and the value that is within the AbsenceDetail cell for the 09/05/05 for # 100 is Holiay, except my formula returns 0 (I have it formatted as General)
I have an Access program that acts as a dashboard to open Excel reports. One of the Excel workbooks opens a form in the Auto_Open routine. My problem is that control is never passed back to access after the form opens. It appears that the code stops executing until the userform is closed. How can I open the excel workbook, show the Excel userform, and continue processing my Access code?
Set XL = Excel.Application With XL .Workbooks.Open FileName:=FileName, ReadOnly:=True . ActiveWorkbook.RunAutoMacros xlAutoOpen End With XL.Visible = True
' Excel Code Sub Auto_Open() Unload UserForm1 UserForm1.Show ' The code get "stuck" right here End Sub
I'm writing an IF statement referring to a cell that contains the character "C" and comparing it to a blank cell, and it's returning True, while it should be returning false because they're not the same.
The piece of the script which I'm having difficulty with is this:
Code: For Each cell In Range("B7:B400") If cell.Value = "No" Then MsgBox "If " & cell.Offset(0, 1).Value & " has left R&D, please remember to delete any future resource forecasts" End If Next
When the cell value has changed to 'No' the pop up message appears, but for some strange reason the message is shown 5 times, despite their being only one record.The other problem I have is if I add another record and change the value to 'No' in column B, the message is shown twice, once for the previous record and the second for the new.
I'm working on a project where column A will always have numbers added every month. How can I get column B1 to automatically retrieve the last number shown?
I'm making a line diagram, showing how a value changes over time. My data is measured every 30 min, which results in a mess when it's plotted over a month.
How do I limit the number of times shown on the x-axis, for instance so that only the date (every 24 hours) is shown?
Raw Material ReportDateDetailOrder Given Received Opening Balance25-Oct-07order to Johson50029-Oct-07Receive from jonson10014-Jan-08Receive from jonson 5405Pending sum500505-5
as you can see that the pending order (receivable from johson) is -5 as we reveive more then order given. i want here that when we receive more than order as in this table the pending must be shown 0. i can do it by apply the condition when pending is