I have an Access program that acts as a dashboard to open Excel reports. One of the Excel workbooks opens a form in the Auto_Open routine. My problem is that control is never passed back to access after the form opens. It appears that the code stops executing until the userform is closed. How can I open the excel workbook, show the Excel userform, and continue processing my Access code?
Set XL = Excel.Application
With XL
.Workbooks.Open FileName:=FileName, ReadOnly:=True
. ActiveWorkbook.RunAutoMacros xlAutoOpen
End With
XL.Visible = True
' Excel Code
Sub Auto_Open()
Unload UserForm1
UserForm1.Show
' The code get "stuck" right here
End Sub
I am attempting to show a User Form during the forms Initialize code. I Load the form after extracting data from a SQL Server database. The code that Loads the form is returned to after the form closes. The problem is that when I run through the Initialize code where criteria decides whether the form is actually shown to the user. If the criteria is not met there are no issue, but if the criteria is met, then the form is opened and the rest of the Initialize code is not stepped through. As there are many If Then and a Select Case and a couple With...'s I need the rest of the Initialized code to be stepped through so after the form is closed by the user and the original code which Loaded the form is returned to I do not get an error.
Oh and the big problem is that I am not getting an error message during this, the Load code is actually repeated because when the original code is actually returned to is returned on the Load UserForm code.
Private Sub UserForm_Initialize() Dim i As Integer, Endofdata As Integer, wsheet3 As Worksheet, wbBook As Workbook Dim wsSheet As Worksheet, c As Variant, gTotal As Long, Score As String, g3000 As Long Dim gTotalAdd As Integer
On Error Goto ErrorHandler: Application. ScreenUpdating = False 'cmbIDCountry.ColumnCount = 2 Set wbBook = ThisWorkbook Set wsheet3 = wbBook.Worksheets("UpdateDetails") Set wsSheet = wbBook.Worksheets("Data") ....................
I have built a small userform with 3 fields. The macro ran OK first few times. Now, when user enters data in the form and clicks OK nothing happens. I found that repeated clicking on OK or Cancel button on form had no effect. I then observed that VBA editor was open and the yellow cursor was displayed on the first code line under cmdOK_click procedure. The code line was also highlighted in yellow. There are no errors to debug and no break points etc. When I clicked the Run (or Continue) icon from the VBA toolbar, the macro completed OK. Question: Why is the macro pausing on the first line and how can I make it run without pausing for no apparent reason.
I have a sub that is called when the user clicks a button on the form.
The sub takes a few seconds to run, so I have created a userform which contains a single label, which simply says "working ... please wait" in large letters.
A code example is as follows:
[Code] ....
Seems simple enough, but what actually happens is that the PleaseWait userform is displayed, but contains nothing (i.e. blank white - the contents is not being rendered). I'm guessing that I need to call something on the userform to force it to render its contents after the modeless call to show it. How can I do that?
I want to do is use a userform to automatically create a graph from the data that is shown in the worksheet. The data in the work sheet will grow and shrink all the time. Am i right in thinking I am meant to create a dynamic range? I know how to do it but am not too sure what I am meant to be naming. And secondly I am not too sure how I set up the button to produce the graph.
My code below works great all the way to the end. When the last message box comes up, If the user chooses Yes. I want them to be directed to the sheet "C123". But currently it just stays on the sheet that I named "Home".
What am I missing here?
Private Sub CommandButton1_Click()
Dim iRow As Long Dim ws As Worksheet Set ws = Worksheets("Log")
'find first empty row in database iRow = ws.Cells(Rows.Count, 1) _ .End(xlUp).Offset(1, 0).Row
'check for a Reason Code If Trim(Me.ComboBox2.Value) = "" Then Me.ComboBox2.SetFocus MsgBox "Please enter a reason code and ensure that date is correct!" Exit Sub End If
I have 3 Work books - one (WB1) checks its version number against an online record and if they dont match it opens WB2 which then proceeds to download the updated version copy information from WB1 to its self which it then pastes into WB3
WB1 then gets deleted and WB3 Renamed to the old name of WB1
the issue i have is when i open WB2 using the button that also checks for updates on WB1.
WB2's code seems to just stop when it gets to the point of updating WB3 no error messages or nothing it just stops!
I am using Excel 2003 work PC, and when i run this simple code it stops during the loop, I have had this problem a bit its like something is hitting the esc key or ctrl - break. But no keys are being hit or are sticking.
I have closed Excel and created new work book pasted the code in but it still stops at r = r - 1, haven't done a restart yet.
Sub Macro2() Dim r As Integer r = 10 Do Until r = 0 ActiveCell.Value = ("Shut down in " & r) Application.Wait Now + TimeValue("0:00:01") r = r - 1 Loop Application.Quit End Sub
I'm using Excel 2007 and my s/s is 360000 rows deep. To cut+paste formulas+formats from one column to another I'm using the following Sub move_formula_and_formats_from_I_to_L()
Dim cell As Range
Application.ScreenUpdating = False
For Each cell In Range("I1", Cells(Rows.Count, "I").End(xlUp)) With cell If .HasFormula And Not .Offset(1).HasFormula Then .Cut Destination:=.Offset(1, 3) End If End With Next cell
Application.ScreenUpdating = True
End Sub The code stops working after 159000 rows and highlights (in yellow) the line: .Cut Destination:=.Offset(1, 3)
I usually just use macros to clean up Data from non-excel sources. So I wrote a macro to do this, but the process requires a date to be added, so attempted to do this via an input box. The input box works, but the code doesn't, clicking the button to which the macro is bound spits out an error 91 (object out of bounds?) when it hits the search function right after the inputbox code. Both bits work as intended separately, so I guess it's just some moronic formatting error on my behalf.
The background is there are about 40 people who use a Excel based program that contains a pivot and a bunch of other tools that they use on a regular basis, this set of tools has a version number. In this excel workbook, it has a function that looks on the network drive that we have and checks the local version vs the version on our network drive, if its wrong, then the user gets a popup stating your tools are out of date, would you like to update, then they click yes and I have these lines of code
Public Function GetNewTools() Dim MyFullName As String
'Turn off alerts Application.DisplayAlerts = False
'Open the new version of tools Workbooks.Open Filename:= _ "Network DriveUpdate.xlsm"
End Function
The update file has this code that executes on fileopen in the thisworkbook section by calling the following sub
The main issue we're running into is near the very end, the code never makes it to "TEST 2". After the first workbooks close, the code just stops running. No crashes, errors, freezes, anything. It just stops running and never makes it to the second msg box.
I have a Userform that allows a user to select a year eg (2007) from a listbox called yearbox where Yearbox.Value = AddYear. When the user Presses 'OK' the following code runs: ...
I have a textbox from the drawing toolbar. When someone changes a cell then clicks in the textbox, Worksheet_Change does not run. If they double click in the cell, that's OK I can capture that event and protect the sheet, stopping them clicking in it. But if they just start typing in the cell, I can't capture that. I have seen some API code which captures keypresses, but it is not practical to use as it loops repeatedly. I could lock the textbox and have the user do something to unlock it, but this is a last resort.
When I run the userform initialize procedure to reset the values in text boxes and the like instead of resetting like it should, now it closes the userform completely and then won't allow me to show it again, what could be the problem?
Private Sub UserForm_Initialize() Me.MultiPage1.Value = 0 TextBox3.Value = ActiveWorkbook. Sheets("Sales Invoice"). Range("G15").Value Dim hWndForm As Long Dim hMenu As Long hWndForm = FindWindow("ThunderDFrame", Me.Caption) 'XL2000 hMenu = GetSystemMenu(hWndForm, 0) DeleteMenu hMenu, SC_CLOSE, 0& End Sub
The Dim stuff down is to gray out the x button, there are also some module level declarations to go with that...
Private Declare Function FindWindow Lib "user32" Alias "FindWindowA" (ByVal lpClassName As String, ByVal lpWindowName As String) As Long Private Declare Function GetSystemMenu Lib "user32" (ByVal hWnd As Long, ByVal bRevert As Long) As Long Private Declare Function DeleteMenu Lib "user32" (ByVal hMenu As Long, ByVal nPosition As Long, ByVal wFlags As Long) As Long Private Const SC_CLOSE As Long = &HF060
the userform shows when the workbook opens and is then hidden when the user has finished entering values, then when the user goes through the process of being asked to print and save, they are then asked if they would like to create a new record, if yes then it shows the userform again, but the userform is still filled with all the stuff previously entered. I tried using the unload me instead of hiding and that wouldn't work at all, didn't give errors just didn't show the userform either, this at least shows the userform, but now when the user goes to clear the information by initializing the userform again, it simply closes the userform and then it can't be shown again either.
[url]
This is the link to the ZIP, and here are some instructions for setting it up to work.
The contents of this need to be unzipped into a folder called SyntheticShield that is placed in the C: drive that way all paths begin with C:SyntheticShield and then the other folders or files will be referenced correctly. The template I'm having problems with is the SyntheticShieldInvoiceMaker template, when you open it you'll be prompted whether you want to create a new invoice, number is final blah blah blah, say yes, then it will ask if you are importing from the Quotemaker which you aren't say no, it should then show the userform as it should. Then you can go through that process and by pressing either the create invoice or go to template directly whatever, you can hide the userform. Then you press the command button (red) a userform is brought up asking if you'd like to save without emailing, save with emailing or close controls, as for right now, I'm just getting the save without emailing to work the rest is all the same just a few tidbits of code. So click save without emailing, it should then prompt an are you sure message box, click yes it will do some things, then it will ask if you want to print, click no, then it will ask do you want to create a new invoice, click yes, this should then start the process all over again by calling the workbook_open procedure, however, when you go through everything, and click no to the import from quotemaker part it won't show the userform. And at one point it would, but then I couldn't initialize the userform without it disappearing and not being allowed to be shown...I tried putting a command button on the template to show the userform, but it wouldn't do it either.
I have a value showing up as #####. When I auotfill the cell to the next on the right, it shows the right value. How do I correct this so it just shows the right value in the first cell?
Columns O,P and Q should show a "Y" if Column N has the percentage (the percentages shown at the top of those three columns) over the value in column D. I hope this makes sense!
******** ******************** ************************************************************************>Microsoft Excel - Team Lead Incentive.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutF3H3N3F4H4N4= CDEFGHIJKLMNOPQ1***WF*Team*Lead*Incentive****As*of*4/5/07***(15%)(20%)(25%)2TeamBase*Team*****Hours******Wk*1Wk1*%Wk*2Wk2*%Wk*3Wk3*%Wk*4Wk4*%*Total$75*$100*$125*32600.25*592.00-1.37%623.753.92%*****2.54%***43388.00*467.5020.49%527.5035.95%*****56.44%***WF* [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I am finishing a travel per diem form and I want to implement a user form where the current rates could be entered by the user and update specific cells used as my drop down list values. I have made the form and a box that activates it. I just can't write the code to place the inputted data from the form into specific cells on a sheet so the list boxes will have the current rates to choose from. I can only find information to have the data populate the next blank row of a table.
Above is the formula I'm trying to get to work but it's not-a-happenin. It seems like the first IF overides all of the others. Basically I want the first IF to be ignored if column G contains any of the words shown. So basically what I think is happening is that P3 is less than Q1 so it's ignoring the rest of the IFs. Originally my formula worked fine as:
=IF(P4<$Q$1,E4-S4,"Not Changed")
But I realized that i needed a certain category of product ignored. Products are labeled in column G.
some Excel columns (see attachment). A1 is set to =C1 and the formula is dragged down, relatively referencing column C. Column B applies a formula to the values in Column A.
If I go into the formula bar for cells in A and push enter, the spreadsheet shows the correct value and I can then push enter in the adjacent Column B cell to solve. But, how can I get these data to display properly automatically?
I am trying to re-jig a formula that shows hours worked for a particular day, to showing any absence detail shown for a particular employee. I have the fllowing formula which doesn't work and I'm not sure why. A similiar formula works for me getting basic hours worked etc
My range names are correct and all have the same 'length'. F67 is 09/05/05; StaffNumber = 100 and the value that is within the AbsenceDetail cell for the 09/05/05 for # 100 is Holiay, except my formula returns 0 (I have it formatted as General)
I'm trying to plot a function with specific values marked on the X axis (or at least distributed according to the said values). Namely, I have something like this:
And while it does plot the Y's as I want them to be plotted, X'es are just used as labels, which causes 0 and 100 to be equally apart as 933,9 and 944. How can I plot it, then, so that I simply select my desired Y values, their corresponding X values and get the plotted function?
I'm writing an IF statement referring to a cell that contains the character "C" and comparing it to a blank cell, and it's returning True, while it should be returning false because they're not the same.
