Columns O,P and Q should show a "Y" if Column N has the percentage (the percentages shown at the top of those three columns) over the value in column D. I hope this makes sense!
******** ******************** ************************************************************************>Microsoft Excel - Team Lead Incentive.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutF3H3N3F4H4N4=
CDEFGHIJKLMNOPQ1***WF*Team*Lead*Incentive****As*of*4/5/07***(15%)(20%)(25%)2TeamBase*Team*****Hours******Wk*1Wk1*%Wk*2Wk2*%Wk*3Wk3*%Wk*4Wk4*%*Total$75*$100*$125*32600.25*592.00-1.37%623.753.92%*****2.54%***43388.00*467.5020.49%527.5035.95%*****56.44%***WF*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
Is there a function to convert the data shown in table 1 to table 2 without rearranging the columns and rows? because i don't want to use TRANSPOSE. I want a function, somthing like SUMIF with OFFSET or INDEX and MATCH or any other function.
I have a value showing up as #####. When I auotfill the cell to the next on the right, it shows the right value. How do I correct this so it just shows the right value in the first cell?
Above is the formula I'm trying to get to work but it's not-a-happenin. It seems like the first IF overides all of the others. Basically I want the first IF to be ignored if column G contains any of the words shown. So basically what I think is happening is that P3 is less than Q1 so it's ignoring the rest of the IFs. Originally my formula worked fine as:
=IF(P4<$Q$1,E4-S4,"Not Changed")
But I realized that i needed a certain category of product ignored. Products are labeled in column G.
some Excel columns (see attachment). A1 is set to =C1 and the formula is dragged down, relatively referencing column C. Column B applies a formula to the values in Column A.
If I go into the formula bar for cells in A and push enter, the spreadsheet shows the correct value and I can then push enter in the adjacent Column B cell to solve. But, how can I get these data to display properly automatically?
I have a sub that is called when the user clicks a button on the form.
The sub takes a few seconds to run, so I have created a userform which contains a single label, which simply says "working ... please wait" in large letters.
A code example is as follows:
[Code] ....
Seems simple enough, but what actually happens is that the PleaseWait userform is displayed, but contains nothing (i.e. blank white - the contents is not being rendered). I'm guessing that I need to call something on the userform to force it to render its contents after the modeless call to show it. How can I do that?
I am trying to re-jig a formula that shows hours worked for a particular day, to showing any absence detail shown for a particular employee. I have the fllowing formula which doesn't work and I'm not sure why. A similiar formula works for me getting basic hours worked etc
My range names are correct and all have the same 'length'. F67 is 09/05/05; StaffNumber = 100 and the value that is within the AbsenceDetail cell for the 09/05/05 for # 100 is Holiay, except my formula returns 0 (I have it formatted as General)
I'm trying to plot a function with specific values marked on the X axis (or at least distributed according to the said values). Namely, I have something like this:
And while it does plot the Y's as I want them to be plotted, X'es are just used as labels, which causes 0 and 100 to be equally apart as 933,9 and 944. How can I plot it, then, so that I simply select my desired Y values, their corresponding X values and get the plotted function?
I have an Access program that acts as a dashboard to open Excel reports. One of the Excel workbooks opens a form in the Auto_Open routine. My problem is that control is never passed back to access after the form opens. It appears that the code stops executing until the userform is closed. How can I open the excel workbook, show the Excel userform, and continue processing my Access code?
Set XL = Excel.Application With XL .Workbooks.Open FileName:=FileName, ReadOnly:=True . ActiveWorkbook.RunAutoMacros xlAutoOpen End With XL.Visible = True
' Excel Code Sub Auto_Open() Unload UserForm1 UserForm1.Show ' The code get "stuck" right here End Sub
I'm writing an IF statement referring to a cell that contains the character "C" and comparing it to a blank cell, and it's returning True, while it should be returning false because they're not the same.
how I can have the selected item in a dropdownlist also to be shown in another cell? Typing the cell number of the dropdownlist in another cell (f.e. ="dropdownlist cell number)" doesn't seem to do it.
The piece of the script which I'm having difficulty with is this:
Code: For Each cell In Range("B7:B400") If cell.Value = "No" Then MsgBox "If " & cell.Offset(0, 1).Value & " has left R&D, please remember to delete any future resource forecasts" End If Next
When the cell value has changed to 'No' the pop up message appears, but for some strange reason the message is shown 5 times, despite their being only one record.The other problem I have is if I add another record and change the value to 'No' in column B, the message is shown twice, once for the previous record and the second for the new.
I'm working on a project where column A will always have numbers added every month. How can I get column B1 to automatically retrieve the last number shown?
I'm making a line diagram, showing how a value changes over time. My data is measured every 30 min, which results in a mess when it's plotted over a month.
How do I limit the number of times shown on the x-axis, for instance so that only the date (every 24 hours) is shown?
Raw Material ReportDateDetailOrder Given Received Opening Balance25-Oct-07order to Johson50029-Oct-07Receive from jonson10014-Jan-08Receive from jonson 5405Pending sum500505-5
as you can see that the pending order (receivable from johson) is -5 as we reveive more then order given. i want here that when we receive more than order as in this table the pending must be shown 0. i can do it by apply the condition when pending is
I have set up a sheet recording an each individual's turnover for my business i.e., hours worked, etc and have set up a data validation table for drop down options of Jan, Feb, Mar,etc....
Rather than creating more work for each month on the worksheet, how can I enable the drop down to contain the data specific to each month?
Recently I come across a file with only 1 sheet, in which is a table only occupied an array of A1:Q49. In Normal View I can see the row / column header of A-Q and 1-49 as usual, but nothing outside that range (only grey colour). Also, the empty cells outside A1:Q49 are all grey too. How can I do that?
Some of my excel files, which are not massive seem to crash my computer when saving or recalulating or even using some filters. The files show as not responding for a couple of mins then come back to life after completing the requested action. Often this is not a complicate task that can cause this.
When this is happening the CPU usage shown on task manager is 99 for the excel file.
This doesn't happen on any other program, I can use word and powerpoint etc with no issues. Its just excel that my computer has a problem with.
This is really frustrating as I can end up twiddling my thumbs for 5 mins unable to do anything, when I just want the file to save or re calculate. I already use manual calculation on anything file more than 500 lines to work with the situation.
I am having trouble with my VBA code, it hides groups of rows (projects) based on the contents of corresponding cells above. these have either 'yes' or 'no' in them (indicating if the person is active in that project). The Yes/No is formula based from another sheet.
what I am trying to do, is have particular cells, withing the projects rows, locked (as they are also populated by formulas) but have other cells open for editing.
when I try and do this i get an error with my VBA, i am assuming that as cells are locked, the VBA is prohibited form hiding inactive projects/rows. i tried an addition at the bottom but this hasn't worked
Code: Sub Worksheet_Calculate() Dim i As Long, StartRow As Long, EndRow As Long StartRow = 13
