The tab order in an Excel spreadsheet is driving me nuts. I could not get it on my own and found some code that seemed to solve my initial problem.
However, I still can not figure out why I can't go backwards. It will ONLY go forward no matter what you do. If you try to select a cell behind or in front, it just tabs to the next cell in the array. Can anyone help before end up sitting in the corner of the nut house crossed-eyed and drooling
Okay, say I have a spreadsheet like this:
Cell1 Cell2 Cell3
Cell4 Cell5 Cell6
How do I make it:
Cell6 Cell5 Cell4
Cell3 Cell2 Cell1
The following code gives me a 'Method' Range of Object'_Worksheet' failed error. I'm using Excel 2003.
View 7 Replies View RelatedI have input cells on a protected sheet with a tab order array setup. It was originally set up to work when their was a Worksheet Change. Not every cell is going to have data input into it. This is where the problem lies. If a cell is left blank it tabs out of sequence. I changed it to a Worksheet Open Sub but that didn't work.
Code is as follows: ...
I looked at threads realted to printing but wasn ot able to find something similar to what I need. So here is my problem:
I have a file with more than 100 worksheets (each sheet contains the invoice for one store). I would like to create a macro that would enable me to determine the order in which worksheets would be printed. How to do it?
Idea #1: the printing order would be based on the value in cell L1 that would contain the route number for each store. Stores belonging to the same delivery route will have the same value in L1. So, the macro should first print all sheets with 1 in cell L1, then print all sheets with 2 in cell L1 and so on...
Idea #2: Creating a separate data sheet with the list of all stores and their corresponding route number. Let's say info is contained in range A1:B150, where Column A contains the name of the stores and column B contains the route numbers. The macro then should look at that list to determine the printing order of the subsequent worksheets (the name of the store in column A would be the same as the name of the worksheet corresponding to that store).
Idea #3: sorting my 150 worksheets manually. It does not solve my problem fully, though, because stores do not always belong to the same route. So the manual sorting should be carried out daily and would not save time at all.
I have a list of terms to put together and what I have is a master list of 6 concatenate functions and I need to link them to all the different words in my list.
The first word in collumn A needs to be with the function in D1, the second word (A2) needs to be with D2, then A3 with D1, and A4 also with D1, while A5 with D6, etc.
It looks something like this:
for your info...I have put numbers in the adjacent cell corresponding to which of the 6 concatenate functions need to go into the cell in collumn C
So in reality all I need is a function that would rearrange my list of 6 functions from Collumn D into collumn C based on the numbers 1-6 I have in collumn B
Workbook.txt
(attached is an example to better see what im talking about. Disregard that the concatenate functions are not working...it doesnt matter right now.)
I need a way to re-order an excel worksheets columns based on another worksheet.
Data is extracted from a database into excel however users can configure the columns in the initial system. to how they like This causes problems when the data is copied into an excel spreadsheet I have created as the data copied will not be in the same column order as is required.
How can i reorder the columns without physically having to cut and paste the columns to match?
I have attached a sample spreadsheet.
You will see on the spreadsheet that 'fixed columns' is the order that i require the data however 'variable columns' is not in the same order.
creating a formula to rank certain cells in reverse order.
Example
Cell Total Rank
B1 = 2456 3
B15 = 2369 2
B30 = 2547 5
B45 = 2141 1
B60 = 2471 4
Rank every 15 cells basically in reverse order.
I have a big file here : [URL] .....
As you can see, the second column contains abstracts which I want to use to determine categories for each document (each line).
Categories are as followed :
Diabetes prevention -> keywords : sugar, diabet*, insulin*
Obesity prevention -> keywords : weight-loss, fat*, LDL
etc. (5-8 categories)
To target one keyword, I found this formula :
=IF(IFERROR(SEARCH("*diabet*"; $B3); 0); "Diabetes prevention"; " ")
What I would like to know is how to add more than one keywords in this formula.
I would also like to know, if it is even possible, how to put every categories in this column, so that i don't have a category per column ... It's hard to explain.
I want to have in front of each line the corresponding column. It means that the formula has to search for every keywords and select one or more appropriate categories.
Excel 2007. At the bottom of a column of data I'm trying to reference the cell $AG4. There are 340 total columns. Each additional column to the right needs to reference the next cell in column AG. So I'm trying to drag and copy horizontally from $AG4 to $AG340. When I try just the single column it just copies $AG4 into everything to the right. When I have to columns ($AG4 and $AG5) and grab both to try to copy horizontally the numbers increasing it just does $AG4, $AG5, $AG4, $AG5, etc.
View 2 Replies View RelatedHave developed a form for my associates and want them to be able to move to the cellls I want them to fill data in to by merely hitting the TAB or ENTER key vs. having to move the cursor to each cell requiring them to input data.
Want cursor to move in a specific cell order. You would think you could merely say 1M, 2C, etc.
In Excel 2007, Windows 7 Home Premium, I am trying to summarise multiple worksheets into one sheet, creating a list in one column in this summary sheet that includes the cell contents from the same cell from each sheet. For example, my first sheet is called KCD183 and I want to list the value from KCD183 Cell A2 in my Summary Cell A2, then show KCD184 Cell A2 in Summary Cell A3 (i.e. the next row down). So my Summary sheet will list all cell A2s from all my sheets, 1 after the other down column A and will continue to add these for any new sheets I add.
I realise that I could just export the spreadsheet to Access and report on it from there, but I don't have the software!
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
I would have like a chance to be able to remove the apparent potenitial dangerous problem from the thread below and not close it after 10 mins. I'm not on the site permenantly and keep dipping back in eveynow and again. I dont know what the issue is as when I open the file up I dont get any error messages. I have tried this on my machine using Office 2003 and Vista also another PC using Office 2003 and XP
[url]
The only error I get is a message saying Disk or Network error, when testing it on the XP Machine this is because doesnt have access to the Database it sends the data to.
When it is sorted by ascending and next time when they click header I want it to be sorted by descending.
Right now I have implemented to sort Descending . Now how will I check in which order does it sorted?
If know the order in which it is sorted currently then I will sort it in the opposite way..
Here's what I would like to be able to do
1. On Sheet1 - do things (I can code that bit)
2. On Sheet2 - do more things (I can code that bit)
3. Create copies of both sheets 1 and 2 (to make Sheets 3 and 4) - can't do!
4. Repeat step 3 above 125 times to make 250 sheets (each being a 'clone' of sheets 1 and 2) - also can't do
I'm trying to find 4 digit duplicate in any order from 0-9 in 4 different columns and because they are from 0-9 in each column it doesn't seem possible.
View 2 Replies View RelatedCan i take a name that is in "normal" order and change it so that it is in the format of "Lastname, Firstname Middlename" regardless of how many names are represented?
I have used a simple concatenate formula along with some left/right formulas to get this working if every single person in the list has only their first and last name, but I get errors if the person has 3 or more names listed.
So what I want, is a formula that will turn these names:
Carl Johnson
Carl Robert Johnson
Carl Joseph Robert Johnson
into these names:
Johnson, Carl
Johnson, Carl Robert
Johnson, Carl Joseph Robert
I have a master order sheet with 100's of items on it which I use to go through my stock room and enter the qty's I would need to order. I have then created a seperate sheet that I use as a P/O to my supplier, this picks up all the info from my order sheet. everything works well except when I do NOT need a paticilaur item. On the P/O it still shows but with 0 qty, I would rather it not show at all and move on to the next item that does have a QTY.
View 9 Replies View RelatedI have a list of some 200 odd items on one sheet that is my price list; what I would like to do is have another person - who may only have very basic, or virtually no excel skills at all, be able to select items from the price list and have each of those items go to the top of an order form on another page.
It needs to be automatic, and anybody that has only basic excel should be able to use it.
i have A1:A60 filled with numbers. however, they are ordered incorrectly. how can i order then in B1:B60 in the following way?
1st cell
7th cell
13th cell
19th cell
25th cell
31st cell
37th cell
43rd cell
49th cell
55th cell
2nd cell
8th cell
14th cell
20th cell
26th cell
32nd cell
44th cell
50th cell
56th cell
etc.
until the 60th cell
I have several checkbox and adjacent to it there is a textbox. Also I have a command button.
On Form initialize, all checkbox and textbox are hidden, except first check box and textbox.
The first checkbox1 is enabled and textbox1 is empty. On Exit event of textbox1, the checkbox2 and textbox2 gets visible, with checkbox2 enabled.
On exit event of textbox1, the cursor goes to command button on Tab
My requirement:
The cursor should go to textbox2.
Note:- I have Tabindex set to as following:
Textbox1 = 0
Textbox2 = 1
Commandbutton1 = 2
I need a macro that will copy a row from Sheet1 and paste it in sheet2 but the row must be inserted in ascending order based on the enties in sheet2. The order in sheet2 should follow colums A, B & C
View 9 Replies View RelatedI need to have 6 rows automatically adjust themselves, and be listed in descending order, according to a percentage that will change daily.
View 9 Replies View RelatedI need to create many XY charts in a VBA macro. For each chart, I need to select a particular column for the X dimension, and a particular column for the Y dimension. When I use a named range to define the X and Y columns, my macro works fine for those instances when the X comes first. However, if my desired Y dimension comes first, I cannot find a way to correctly select these.
The context is such that my spreadsheet always has the same data fields in the same columns, but the numbers of rows vary. In addition, I need to dynamically select which rows to use, based on the values in the columns to be plotted. I’ve figured out how to do this within the macro, except for those instances when the Y column comes before the X. An example when this works:
' X-Y chart, Field10 vs. Field12
Sheets("Raw").Select
Names.Add Name:="newRange", RefersTo:="=$K13" & ":" & "$K" & FirstBias _
& ",$M13" & ":" & "$M" & FirstBias, Visible:=True Range("K1").Activate
Charts.Add
ActiveChart.ChartType = xlXYScatterLines
ActiveChart.SetSourceData Source:=Sheets("Raw").Range("newRange"), PlotBy:=xlColumns
ActiveChart.Location Where:=xlLocationAsNewSheet, Name:="Field10vsField12"
With ActiveChart
.HasTitle = True
.ChartTitle.Characters.Text = "Field10 vs. Field12"
.Axes(xlCategory, xlPrimary).HasTitle = True
.Axes(xlCategory, xlPrimary).AxisTitle.Characters.Text = "Field10"
.Axes(xlValue, xlPrimary).HasTitle = True
.Axes(xlValue, xlPrimary).AxisTitle.Characters.Text = "Field12"
End With
ActiveChart.HasLegend = False
In the above example, variable ‘FirstBias’ is computed previously in the macro. I realize that I can rearrange columns in my spreadsheet to avoid this, but that is much less convenient, and less elegant, and I think there must be a way for a macro to do this automatically. I can do it interactively by cutting and pasting the data ranges in the chart wizard dialog, but I need this to be automated. I also figured out how to automate it in the case where the X and Y columns have fixed rows, by adding the commands below:....................
Example Data...
----A---B---C
1---B---1---
2---A---2---
3---E---5---
4---C---4---
5---D---6---
6---G---3---
7---F---6---
I have this formula in cell C1, filled down to C7:
=IFERROR(INDEX($A$1:$A$7,SMALL(IF($B$1:$B$7>=5,ROW($A$1:$A$7)-ROW($A$1)+1),ROWS(C$1:C1))),"")
This creates a list of cells from column A where the correspsonding value in Column B is greater than or equal to 5.
RESULTS:
----A---B---C
1---B---1---E
2---A---2---D
3---E---5---F
4---C---4---
5---D---6---
6---G---3---
7---F---6---
Any way that would generate these cells in alphabetical order making it look like this:
----A---B---C
1---B---1---D
2---A---2---E
3---E---5---F
4---C---4---
5---D---6---
6---G---3---
7---F---6---
Jason.CellsThatMeetConditions.xlsx
This was the code I attempted to use previously
Private Sub Worksheet_Change(ByVal Target As Range)
Dim aTabOrd As Variant
Dim i As Long
'Set the tab order of input cells
[Code] .......
get sorting out top 3 clients with the total amount.
A
B
C
1
Company Name
Value
2
Apple
2100
3
Mango
4000
I found that =LARGE only work for single cell name with single value instead of multiple cell that may contain same name but different value and add them up.
I have a worksheet with data in several rows. Column wise they consist of names, points etc..
I am trying to setup a formula whereby the formula looks at the data in the points columns and then re-orders the rows accordingly taking all the information in the row with it, with the highest points total at the top and lowest points total at the bottom.
Each points cell, has a formula in there already which pulls the points total from other cells and combines them.
I have a list like this
Dog
Elephant
Hippo
Cat
Morris Minor
Yak
Jaguar
+ about 300 others
I need to copy these and then paste then in another column in the reverse order. Is this possible ?
