How to create checked and unchecked checkboxes based on three criterion(in sheet 1)?for clear explanation..it will be like this...firstly,the "SELECT TAKEN only"checkbox will checked/unchecked row d20:r20.secondly,the "SELECT RETURN only" checkbox will checked/unchecked row d21:r21 and so on.lastly,"SELECT ALL" will checked/unchecked all the rows.
Checkbox1.xlsm
I'm having an issue with counting the number of check boxes that are checked.
In cells B2 thru B6 are a the initials BA or CS
In cells D2 thru D6 are the check boxes
I've linked the check boxes to F2:F6
I also need it to be able to differentiate between the two sets of initials. If tried this thus far
In cell C9 =if(B2:B6="BA",COUNTIF(F2:F6,True))
In cell D9 =if(B2:B6="CS",COUNTIF(F2:F6,True))
I am getting a #VALUE! I've tried rearranging the brackets, but can't seem to get this to work.
I have 110 checkboxes on a sheet. User checks some of them. After he is done, I need to know the total number of boxes checked. I wrote a simple loop but there is some little error. Essentially I am trying to have Sub go box by box and see which one of them is checked:
With ActiveSheet
b = 0
For i = 1 To 110
If .Shapes("Checkbox" & i).OLEFormat.Object.Object.Value = True Then
a = 1
End If
Next i
b = b + a
MsgBox b
End With
I have a multi-worksheet workbook that has many forms control checkboxes throughout it. I'm looking for some VBA that will change the background (fill) color of ALL the checkbox when it is checked (True). I've seen code for a single checkbox, but not multiple/all boxes. I know just enough VBA to be dangerous, but I'm up to learning anything new.
View 3 Replies View RelatedI am attempting to create a formula that will, return text results based on 2 criterion.
This is what my sheet looks like
Name Job Full Time / Partime
Bob Admin Full Time
Barry Accounts Part Time
Chris Claims Full Time
Emma Claims Full Time
The formula I have for this is {=INDEX(A1:A4,MATCH(1,(((B1:B4)="Claims")*((C1:C4)="Full Time")),0))}
Which is fine and returns the name Chris, however as you can see from above, Emma also meets the criteria given however, I cannot get Emma to appear also. Is it possible to display more than one entry in a cell/s based on this formula, or am I missing something.
I would use a pivot table to do this, however I need the sheet to be completely automated.
Multilookup based on Multiple criterion without using Arrays
Dear Forum,
I am well aware of the oft-mentioned Array Solution which gives us more than one record based on mulitple criterion using the INDEX function..
the formula layout being as mentioned below:
[ ={INDEX(A2:A100,SMALL(IF((B2:B100=<Condtn 1>)*(C2:C100=<Condtn 2>),ROW(D2:D100)-ROW($D$2)+1),ROW($D$2:$D2))} ]
I like this formula a lot and have used it more often, however it has made my file exceedingly slow..
Considering that it takes every small change in the file to compute around 5 mins or more than this the whole purpose seems to be defeated, I have read a lot of posts on Array Vs Non-Array of late by DonkeyOte.
code below whould return value "a" to specified range(s) The cells are formatted Marlett, 10pt, black, bold, center. Should return a nice tick mark to the specified range if selected shape has value of 1. I double chk'd the name of the shape referred to in code and it is correct Yet value of "a" is not returned, though the chkBox is "ticked". What else can I check?
Option Explicit
Sub cv_ReviewCheckBoxes()
Dim wbBook As Workbook
Dim wsNotesLoose As Worksheet
Dim wsCoinRolled As Worksheet
Dim wsCoinLoose As Worksheet
Dim wsSummary As Worksheet
With Application
.Calculation = xlCalculationManual
.DisplayAlerts = False
. ScreenUpdating = False
End With.........................
I need to filter and clean the criterion based on another column cells.
If the R column has the value 1, then it is filtered and cleaned only the cells of column J
My spreadsheet needs to stay current with the strange layout.
[Code] ....
Attached File : LayOutStranger.xlsx‎
I want to add a secondary function to these buttons; this is a necessary function for every order, so I want to make it necessary to click one of the buttons for every order. One way to do this would be to leave the button unchecked.
How could the button be set to leave itself unchecked after being clicked on?
I am getting an automation error
The project is the create checkboxes out of the tab names in a workbook. After that, create a new workbook with the selections made. It is at the point where I pass the array of sheets to be copied that the error occurs. The only thing I can figure is that my variable curWB is not what I think but I declare it to be the original workbook before that point. All of the code is below.
Another possibility is that this code with some other code sits in the worksheet called index. This sheet is being copied to the new workbook also.
VB:
Private Sub CommandButton2_Click()
Dim oleObj As OLEObject, ole As Object
Dim sheetSelection() As String
[Code]....
I have a sheet with data that is associated with a month or season. I need to create a drop down list or check boxes on another sheet that will allow me to select the data associated with the month or season that is chosen.
For instance, on Sheet1, I have Summer-12 as the label in cell A1, and the data associated with it in cell A3:AH15. Winter-12 is in cell A18 and the data associated with it is in B20:31.
This goes on for 3 years of data.
I need a drop down list or check boxes on sheet2 where I can select one or multiple seasons and then the associated data for those seasons appear in order.
I need to create a long series of checkboxes in which each box is linked to the cell directly to the right of it. When I try to copy and past the checkbox, the link doesn't update. Which means I have to go in manually and change every checkbox link.
View 3 Replies View RelatedI would like to implement a pricing tool where by if you select certain boxes the price will be increased or decreased.
For example. If chk_UtilA is selected on the attached then the target price will be multiplied by 10%.
My worksheet contains the following:
- Column G includes fifteen rows of a formula (beginning at G9) that returns a dynamic list of values based on criteria chosen through a dropdown box. The list can be anywhere from five to 20 values depending on the selection. When the potential matching values for the list are exhausted, the formula returns ""
- Column F includes one checkbox for each of the 20 rows containing the formula.
I need a script that will hide each checkbox that is next to a "blank" value. That is, if the cell in Column G = "", I need the corresponding checkbox to be invisible. Unfortunately, hiding the entire row is not an option. If the script could uncheck the boxes when hidden, that would be a bonus, but isn't absolutely necessary
I am making a form. At the top there is a dropbox with a list of applications. Based on which application the user picks, I want another section of the form to populate check boxes with the name of the projects that are associated with that application. Some applications have 2 projects, some applications have 7 projects.
View 12 Replies View RelatedEvery thread I see on Google search for creating check boxes on a user form based on worksheet data says to use a list box, but I really want check boxes. Any code that will create, on initialize of the user form, a check box for each item in Import!B2:B (last row), regardless of the number of items? I am only worried about having about 20 max. Usually, it will only be 5 to 10.
I did try the list box, but it doesn't populate the list box.
Code:
Private Sub UserForm2_Initialize()
Dim lbtarget As MSForms.ListBox
Dim rngSource As Range
'Set reference to the range of data to be filled
[Code] ..........
I currently have a spreadsheet with a userform that has multiple checkboxes. I want these checkboxes to change the value of cells depending on whether or not they are checked. 1 for not checked, 2 for checked. The column of the named range the cells are in is constant for each checkbox (though it is different for each checkbox and some checkboxes will need to change the value of a cell in multiple columns). The row changes depending on the value of a combobox on the userform. I have sorted out a code that works, but it seems very long, slow, and inefficient. I'm hopping someone can show me a better way to do it.
Private Sub CmbFinish_Click()
Dim rClSkills As Range
Dim rClLookup As Range
Dim var1 As Integer
Dim iDecision As Integer
Set rClSkills = Range("TblClSkills")
Set rClLookup = Range("ClassLookup")
iDecision = MsgBox("Are you sure you wish to change Skills?", vbYesNo, "Continue?")
If iDecision = vbYes Then
var1 = Application.WorksheetFunction.Match(cboClass.Value, rClLookup, 0)
If CboAppraise.Value = True Then.............................
I have a sheet with around 3,000 rows of data. I need to be able to enable/disable different comibinations of three checkboxes based on the value of a cell in column D as follows:
If Band says £0k - £75k then all three check boxes should be disabled
If Band says £75k - £250k then the Step 1 check box should be enabled but the Step 2 and Step 3 check boxes should be disabled
If Band says £250k - £500k then the Step 1 and Step 2 check boxes should be enabled and the Step 3 check box should be disabled
If Band says £500k plus then all three check boxes should be enabled
When a checkbox is disabled I'd like it to appear visible but greyed out so it is obvious the option is not available, maybe via conditional formatting. I don't know if this can be achieved within any code rather than having to manually add conditional formatting afterwards?
I've attached a sample to demonstrate. Is this possible to achieve? I'm open to alternative approaches as well if this makes things easier to do. The mere idea of adding 9,000 plus check boxes if already scary!
I deal with Income statements of varying length. What I'm trying to do is figure out a way to rank only the expenses.
The account names change from sheet to sheet, and the number of accounts always changes.
However, Expenses always START after a cell in the "A" column marked "OPERATING EXPENSES" and always ENDS after a cell in the "A" column marked "TOTAL OPERATING EXPENSES". However, I don't want to rank "TOTAL OPERATING EXPENSES" because it's the sum of all the indivicual expenses.
I am working on a spreadsheet for a retail store. Column A has style numbers; Column B has an indication of A+ if that style number is a high selling item; Column C is called June and represents the number of units per style we will need in the month of June. There are some styles in June that we won't need at all and so the cell is blank for those style numbers in the June column.
I want to count all style numbers we will be ordering in June that are also indicated as an A+ item in column B.
So, I want to write a formula that says count populated cells in column C if column A has an A+.
I have a large spreadsheet, to which I add 4 weeks worth of data, from a database printout, (cut n paste) to the bottom, this could be any number of rows. However there is a column with week numbers in for each row. I can happily use =SUMIF('FORM R60'!$H$1:$H$1248,$A1,'FORM R60'!$AH$1:$AH$1248)
This gives me the info I need on a TOTALS sheet, across various columns and rows, where the formula sits, adjusted for whichever column of data I require totals. This info is then read by another spreadsheet.
However, rather than manually change the formula (to suit a range) to add certain numbers of weeks, as I do now, I would like to include in the formula a condition say where the week numbers are >5 and <10, preferably if the condition could refer to cells.
This INDEX formula looks at two data sets for a match in two cells on the same row
If there is a match betwen BOTH B&D columns on the same row, the code will take data from column F of the second data set and put it in the matching row of the first data set
How do I set this code to do an OR operation rather than an AND operation on the match check?
I.e. a match in either B OR D rather than B AND D?
=INDEX(custom!$F$2:$F$99,MATCH(1,(custom!$B$2:$B$99=B1)*(custom!$D$2:$D$99=D1),0))
Thanks in advance-
How can we set two criterias in autofilter property in vba? For example if there are two columns - departments and grade ... i want that all those rows that have department as Finance and Grade as Grade A should be filtered automatically in VBA Coding.
View 3 Replies View RelatedTrying to create an excel chart to create totals based upon different keys. I
need to be able to calculate how many customers there are by Manager and then
By Rep. Then to figure out how many were New, Current, Total # of RSVP and
attended for that Rep. Below is how I have started but I am having some
problems getting certain parts. I know when I get one the rest will fall into
place. I can calculate how many total customers by manager and by rep just by
doing a Countif command but how do I determine the # of New, Current etc. Is
there a If Than command? Managers Totals are simply his reps totals.
Example..
A B C D E
F G
1 Manager Rep Customer New Biz Current # RSVP # Actual Attend
Need totals to look something like this....
A B C D E
F G
1 # of Cust # New # Current #RSVP #
Actual Attend
2 Manager
3 Rep 1
4 Rep 2
see the attached spreadsheet. Basically I want the formula in the yellow cell to carry out a sum product of two columns, but only for rows where the value in the first (criterion) column is 10.
View 2 Replies View RelatedIs it possible to remove autofilter criteria found in the drop down menus automatically created by autofilter?
View 9 Replies View RelatedI behind developed to a time a function of Addition with an only conditional criterion.
I would like to extend at least for three criteria, this function I function accurately as the function SUMPRODUCT alone that done in VBA.
Function VlookupAllSum(name As String, IntervalSearches As Range, IntervalReturn As Range) As Variant ' as integer para valores até 32.767
Dim Valor, Nome
Dim lin, col As Integer
Dim Total
Application.Volatile
lin = 1
col = lin
For Each Nome In IntervalSearches
If Nome = name Then
Valor = IntervalReturn(lin, col)................
In each row of my data set, columns A thru E contain different three-digit numbers, in ascending order (e.g. 012 312 344 798 880). No number is repeated more than once in a single row, and no two rows contain the same set of five numbers. Column F contains a value (these are what I'd like to sum).
The variables I want to create a formula with are each three-digit numbers, call them X and Y. I want to find the pairs of rows where one row contains X in one of the first five columns, and the other row contains Y and the same other four values as were contained in the four non-X cells in the X-row (note that X and Y may or may not be in the same column, since each row is in ascending order). If X=344 and Y=955, an example of a match would be one row with 012 312 344 798 880 and another row with 012 312 798 880 955. For each X and Y combo there could be many such matching pairs of rows (with different sets of the other four values). I'd like to sum all the values in the X rows of such pairs (and then I'd do the same with a different formula for the Y rows).............
I have a spreadsheet with several thousand lines on it and I only want certain rows from it. Unfortunately I cannot use a sort as I have to keep groups of data in the same order (the line count in between the data that I need left behind isn't always the same so I can't go that route either). I was hoping there was some code to delete all rows other than those where the cell in column A contains either "NAME"; "Data1" or "Data 2".
I tried the code below but that didn't work.
I have collected some data from survey respondents, and I have the following array formula:
=MIN(
IF($C$1:$C$400="happy",
IF($G$1:$G$400="tall",
IF($H$1:$H$400="american",
$F$1:$F$400
))))
What I'd like to do is make the 3rd criterion -- $H$1:$H$400="american" -- dependent on whether the string value in cell A1 ("Evaluate Americans only?") is "yes" or "no".
Because, my actual situation is considerably more complex (see below), I'm looking to insert a test within the MIN array formula to check the value of A1, and calculate the answer accordingly.
I'm aware that I could theoretically create two array arguments (one with & one without the American test), and place them inside an IF function that tests the value of A1. However that isn't practical for my real-world situation...
I occasionally see array formulas with all sorts of symbols that I don't really understand in the array context (such as * and | and . ), and I'm wondering if one of those magic symbols might be the doorway to my solution.