Change Format Of Dates And Times?
Jul 21, 2014
I have dates (column E) and times (column F) currently in the format mm/dd/yyyy and hh:mm .
However, my formula in excel deals with dates and times in the format mmddyyyy and hhmm. How do I change the values of the dates to exclude the "/" and the times to exclude the ":" operators?
I want to change the actual value of the cell too. Basically, using custom format mmddyyyy in the date column will not work (because the true value of the date will still yield mm/dd/yyyy.
View 1 Replies
ADVERTISEMENT
May 28, 2013
I am unable to change the date format in a column of dates. The cells have values that look like the following: 4/29/2013 8:59:12 AM. I want to change these to YYYY-MM-DD format, but no matter what I try the format will not change.
View 4 Replies
View Related
Mar 31, 2014
One of the reports I run provides me information on lengths of time. Such a field displays as |0:09:16| indicating 9 minutes and 16 seconds. However, when the report generates the excel spreadsheet it saves these cells in date/time format ([h]:mm:ss). If I were to convert this field to the number format (so I can manipulate and graph it) it displays as such |0.00643460648148148| Ideally I would be able to have the data in the field stored as |556| (556 seconds, or 9 minutes 16 seconds). I have thousands of fields that I need to manipulate where the data is stored in this format and I can not figure out how to fix it.
View 5 Replies
View Related
May 14, 2009
Hi Guys, This has been bugging me for a bit now and I just can't sus it...
I have a sample perpetual calender that I have been modifying to fit my own purpose. The calender part works fine.
I have beside that a column for holidays, etc and then a another column for other events.
When I put the date in the holiday or events columns I would like the date to be highlighted in the calender above (different colour depending on which column it came from).
The formula I have been playing with (no success) is:
=MATCH(DATE($R$2,1,C8),$I$41:$I$65,0) - This is the Formula for the 1st column of dates.
The 2nd formula is similar, just changes the column it tries to draw the MATCH(DATE.... from...
Although this formula works fine on the sample spreadsheet. When I enter the formula on my sheet, it doesn't seem to work...
I have attached the spread sheet that I am working on.
View 2 Replies
View Related
Apr 4, 2008
there are a multitude of issues with US date formats when you're not in the US but I've run across one that I can't figure out.
I have a source table that has approx 5000 lines on it, everything looks correct and all the dates are in the correct (Australian) format. However when I use it to make a pivot table, any dates that are before the 12/m/yyyy gets changed to the mmddyyyy format in the pivot table only, all the source dates are still correct.
View 3 Replies
View Related
Dec 9, 2006
I have a file with two sheets.
Sheet1 Data are as follows :
Column A : Date (Data is : 31/01/2006,01/02/2006 ...... )
Column B : Name (Data is : ABC , XYZ, ABC .......)
Column C : Time (Format is : HH:MM) (02:00 , 03:00 .....)
Sheet2 Data are as follows :
A1 : Start Date and B1 : End Date
A2 : Name and B2 : Sum of Time
A3 : ABC and B3 : (i Want Result in this cell)
Result is :
I want Result in B3 cell : Name(ABC) of Time sum from sheet1 Column C between Start date(A1) to End Date (B1).
View 8 Replies
View Related
Jun 9, 2014
If you have some low time resolution data you need to compare with high time resolution data how do you average the high resolution data. For example data that starts and ends a fortnight apart and you want to compare it with data that starts and ends 1 hour apart you need to average the hourly data to do so. I can't figure out how:
So if I had Sheet 1 with hourly data
A B C D E
1 Date, Time, Measurement
2 01/01/2014, 01:00, 62
3 01/01/2014, 02:00, 38
etc....
Then in Sheet 2, fortnightly data
A B C D E
1 Date on, Time On, Date Off, Time Off, Measurement
2 02/01/14, 15:23, 18/01/2014, 12:25, 52
3 18/01/2014, 12:25, 01/02/2014, 14:19, 34
etc....
I'd want to add a new column of data to average the hourly data so I can use the correl function.
View 7 Replies
View Related
Aug 17, 2009
In one column I need dates and every date has to appear 16 times.
So, I need date 2009-06-03 in 16 rows, in next 16 i need next day - 2009-06-04.
View 5 Replies
View Related
Aug 18, 2010
I have A1= Date A, B1 = Time A, C1 = Date B, D1 = Time B, E1 = Hours between Date&Time B and Date&Time A
How can I enter a formula that takes the date and times from separate columns and calculates them?
View 6 Replies
View Related
Oct 25, 2011
I have a table that I am storing into an array. I have an array FDate where I store a date and another array FTime where I store times.
FDate is formatted as m/dd/yyyy Hh:Mm: Ss
Ftime is formatted as Hh:Mm:Ss
I know in excel that you can add and subtract dates and times. How do you accomplish the same task in VBA?
View 1 Replies
View Related
Dec 6, 2006
I'm trying to get excel to calulate the difference using the following format
dd/mm/yyyy hh:mm
dd/mm/yyyy hh:mm
So really I need excell to tell me what the actual difference is between dates
View 9 Replies
View Related
May 19, 2008
I seem to have the worst luck when it comes to getting dates and times to calculate together. My logic just seems to go straight out the window.
What I am trying to do, the end result, is get a Time Worked (duration) that I have spent on a ticket, and a Total Time, the time a ticket was opened, to the time it was closed.
I guess we can try to do this one step at a time.
The first thing that I would like to know is if there is a way to calculate Date/Time in a MM/DD/YYYY, H:MM format?
IE:
Ticket Opened ...................Ticket Closed
5/16/2008 2:54 PM..............5/19/2008 10:47 AM
Total Time in Days / Hours / Minutes
Right now I have the Date and Time split into separate cells, simply because I couldnt figure out a way to subtract the combined date and time.
View 10 Replies
View Related
Jan 19, 2009
I am trying to create a "daily donut" to track how long it has been since I left for my current deployment, and how much time I have left until I return home. I would like to show exactly how many year(s), month(s), day(s), hour(s), minute(s), and second(s) (like 1 year, 4 months, 4 hours, 5 minutes, & 34 seconds not 1.0 year, 0.33 months, etc.) it has been (again, not 3600 seconds, 60 minutes, 1 hour, etc.), and how many I have left. I have spent many hours trying to figure this out, and I have even tried looking through this forum, but I still can't completely figure this out. I was close in figuring out the date differences in the x amount of years, months, and days format, but it wouldn't account for the time. I.E., 06/03/09 05:00:00 AM - 06/01/08 06:00:00 AM, would show 2 days, instead of 1 day (I'm not sure how to incorporate the time yet).
The variables are:
A1 Date I Left For My Deployment in M/DD/YY HH:MM:SS AM/PM
A2 =Now() Function in Same Date & Time Format as A1
A3 = Date I Get Home from My Deployment in Same Date & Time Format as A1
Any ideas or help? And if possible, I would like to be able to do this using excel's built in functions (not excel add-ons, vb, etc.), so that it would work on government computers.
View 9 Replies
View Related
Dec 31, 2007
I receive data from a company I deal with that has the date and time of all of my transactions with them listed in an excel worksheet. Only problem is that the date/time that I receive is not in my timezone, which is a bit of a problem for me!
What I want to do is to be able to adjust the date and time shown in the cell forward by 14 hours, so that the data is shown in the timezone that I am currently in. So the end result for the first line of data in the attached file would end up being 2006-08-11,10:28:51 instead of 2006-08-10,20:28:51.
View 5 Replies
View Related
May 23, 2014
I have a some dates in a format which are not being converted into the normal date format. So i made this formula to convert it into the normal date format:
=IF(LEN(B218)=10,(MID(B218,4,2)&"/"&LEFT(B218,2)&"/"&RIGHT(B218,4))+0,IF(LEN(B218)=9,(MID(B218,3,2)&"/"&LEFT(B218,1)&"/"&RIGHT(B218,4))+0,IF(LEN(B218)=8,(MID(B218,3,1)&"/"&LEFT(B218,1)&"/"&RIGHT(B218,4))+0,"")))
Formula is working fine except on this type of date "9/9/2013"..i also tried an OR formula with mid but didnt get the desired result.These are the type of dates:
12/10/2013
12/9/2013
9/11/2013
9/9/2013
7/25/2013
View 9 Replies
View Related
Apr 30, 2014
calculating project completion % based on Project start date and end dates .
View 5 Replies
View Related
Nov 16, 2009
Is it possible to seperate this sheet by Time - using column F, anything which is between the hours of 07:00 - 09:00 and 16:00 - 19:00? Response - column I - times up to 60 mins - 61 - 120 mins and over 120 mins
View 5 Replies
View Related
Feb 14, 2014
I am having difficulty finding the difference between two times and dates in Excel. I have researched this on Google and tried several formulas but none have worked for me. The format the data is currently in can be seen below:
A1: 1/3/2014 11:00:02.230 B1: 2/7/2014 08:42:37.637
A2: 2/12/2014 07:51:58.663 B2: 2/13/2014 05:36:31.893
(Note all times are military time format)
I want to display the difference in C1 in a format along the lines of "dd hh:mm". The data for seconds and fractions of a second is included in the source data but is not needed in the final results.
If the date and time falls on the same day, I have no trouble doing a simple "B3-A3" to determine the answer. For example:
A3: 2/5/2014 09:56:06.273 B3: 2/5/2014 10:39:51.34
Gives me an answer of: 0:43
Trying to do the same for A1 and B1 gives me this: "03 21:42" when I format it to "dd hh:mm".
Is there a formula that would give me the correct answer in both of these cases?
View 8 Replies
View Related
Apr 1, 2009
I need help deleting rows which contain a cell with date / time in the format dd/mm/yyyy hh:mm if the value is older than the current date / time
any ideas?
View 6 Replies
View Related
Apr 24, 2006
I need the difference between two dates/times field in hours or minutes.
Eg:
A1 B1
1/4/05 10:00 2/4/05 14:30
The result should be 13.5 hours, considering only 8 hrs per day, only business days and 8 to 5 workday.
View 10 Replies
View Related
Sep 2, 2008
I'm not too hot with Excel formulas but I'll explain as best I can. I have 3 columns with dates and times
A - 01/08/2008 08:17:08
B - 01/08/2008 12:17:08
C - 01/08/2008 17:00:11
This is what I want to do...
If A > B then Calculate the time difference between A and C
If A <= B then Calculate time difference from B to C
I'd like to get this formula in 1 cell if possible?
View 4 Replies
View Related
Oct 23, 2008
I can’t figure out why this formula is not working. I am trying to alter it a little, but I still think it should work. Here is what I am trying to do. I am looking to calculate the time difference between two work projects, but exclude time when the office is closed. So someone starts a project at 2pm and finish 10am the next day it will show a result of 4 hours because the office closes at 5.
Here is the formula. It is the time formula from cpearson.com ...
View 6 Replies
View Related
Jan 25, 2012
From the below example, I would need to know the difference between date & time of Received and Resolved in number of days. Meaning - time difference should also be calculated in days
CELL ACELL BCELL CCELL DCELL E - REQUIRED OUTPUTReceived
DateReceived
TimeResolved
DateResolved
TimeTurn Around Time - IN DAYS20-Jan-122:43:00 PM23-Jan-124:50:00 PMDifference between Resolved date & time and Received date & time
View 7 Replies
View Related
Jul 13, 2013
I get a list of data through xml data import
column A is dates WITH time, appears like so: 2013-07-13 20:25:02
column B is the product name
column C is the quantity
now I want to search certain items sold between two dates AND times which will then give me the total amount of that item sold between those dates and times
now I know how to do this with date but have a problem doing it with dates and times
View 9 Replies
View Related
Dec 8, 2009
How do you subtract start/end - dates/times in vba?
I know how to do it with formulas, but can't grasp it with vba. My range will always change, so I'm trying to avoid formulas (Cutting rows etc...)
I need Col D-Col B (end date-start date) and Col E - Col C (end time - start time)
Would doing the calculation on the userform be the best way, or trying to do the calculation with the ws code?
View 9 Replies
View Related
Apr 3, 2008
How can you find the average of times?
I have times like
00:01:00
00:00:15
00:00:08
All are in dd:hh:mm format
I need to find their average which shld be 00:00:28 (approx 27.6 mins)
When I do average(A1:C1) its giving me div/0 error.
View 11 Replies
View Related
Mar 27, 2014
I want to select the dates(from column H) in which the value(in column I) is greater than zero and paste them in column K(Attachment). At the same time, I want to expand each day for 24 hours. That means, I want to repeat the date 24 times while pasting in column K.
View 5 Replies
View Related
Oct 18, 2008
Im trying to calculate hours and minutes between two dates/times over more than 24hrs. I have:-
A1 is 18/10/08 13:14, B1 is 20/10/2008 12:20, C1 is 1:23:05
Using the formula C1 =INT(B1-A1)&TEXT(B1-A1,":hh:mm")
But what I really need is just Hours and Minutes so the above should read 47:05.
View 5 Replies
View Related
Feb 28, 2009
I need to calculate billable hours.I have a start date/time and end date/time.Then I need to subtract out all time between 05:00:00.000 and 20:00:00.000. These are not billable hours.But I can include all weekend time.And I can include all holiday time.I need to accomplish this with formulas, no macros.
View 2 Replies
View Related
Sep 27, 2006
Does anyone know why I get a type mismatch on the following? I am trying to subtract one time from the other to get the total hours worked.
Sub WorkedHours()
Dim vStart, vEnd As Date
Dim vHours As Integer
vStart = "11/09/06 22:00"
vEnd = "11/09/06 23:30"
vHours = (vEnd - vStart) * 24
End Sub
View 3 Replies
View Related
