Changing Checkbox Value Without Re-running Macro
Apr 5, 2007
I'm trying to do what I thoughts was the simpliest thing, but for some reason can not manage.
I try to change to value of a checkbox, by a code, without re-running the CheckBox_Click () Macro. I have put a checkbox in a worksheet, and when tickmarking it, a msgbox will pop up (one msgbox for tickmark on), and you can press Yes or No. Pressing No, I will sett the Checkbox.value = False. The problem is, when I use this command, the checkbox_click macro will run all over again. Now, the checkbox is False, and antother msgbox will pop up (another msgbox for tickmark off). The results is then that I first get the msgbox I want, but it is followed by the msgbox for tickmark off, which should only pop up when the checkbox is ticked off manually.
Code is something like follows:
Private Sub CheckBox1_Click()
Dim mySheet As Worksheet
Set mySheet = ActiveSheet
Application. ScreenUpdating = False
View 3 Replies
ADVERTISEMENT
Nov 28, 2007
I want macro to run automaticly when I change values of any of the cell in worksheets("Data").range(B2:F1000)
Is there any way to write macro only for that worksheet/range?
View 9 Replies
View Related
May 26, 2007
Is it possible to change the value of an Excel checkbox (from Forms or Control Toolbox) under program control (i.e. using VBA)?
I'm trying to toggle a group of checkboxes on a worksheet from FALSE to TRUE (or back again) using a single button. The checkboxes all have to remain individually selectable by the user even after 'toggling'.
View 9 Replies
View Related
Apr 4, 2007
I currently have a simply bar chart that is based on a running 5 days figure so the X-axis is like 01-Mar 02-Mar 03-Mar ...
Y-Axis is the data that I am trying to present - Total $
The source of this data is simply two columns - Column A is the running date, Column B will be data.
Daily I need to only present 5 days historical data based on the latest date i.e. today and the past four days (the source data is updated daily).
Can a macro be used to auto update the bar charts based on today's date?
View 9 Replies
View Related
Jan 28, 2014
I have a cell in sheet1 (say, B2) in which I can key a date. Once I change that date, cell C10 updates (after I hit F9 to recalculate) with a new number based on the new date.
I have a list of dates on another sheet, from 1/1/2009 to 12/31/2013, all in column B. I want to produce VBA code that will run through each day, 1/1/2009 to 12/31/2009, in sheet1 cell B2 and take the output in C10 and place it next to each day in column B until it reaches the end (12/31/2013). I know this is possible but for some reason am having trouble coming up with the right looping mechanism.
You can imagine if I had to manually key in each day to get the desired output how tedious that would be.
View 3 Replies
View Related
Feb 25, 2009
married, widows, single checkbox is selected
macro solution
good work.
View 5 Replies
View Related
Aug 3, 2012
I want a macro to be activate ONLY when I check the checkbox. Right now, it activate the macro each time I checked the box.
I want the macro to be activate ONLY when I put the check sign in the checkbox. Is that possible?
View 2 Replies
View Related
Feb 26, 2009
I need to make sure that two checkbox's are ticked before my macro is run. How do I change this into an "AND" statement?
Sub Email1Macro()
If Sheet1.CheckBox1 = True Then
< my commands here>
Else
MsgBox "You must tick the checkbox before you can continue"
End If
Exit Sub
End Sub
View 9 Replies
View Related
Apr 16, 2014
I have 3 checkboxes; when one is checked, a set/range of rows should be visible. Only 1 checkbox should be checked at a time.
If checkbox 18 is already checked, and checkbox 20 is then checked, I want the first checkbox unchecked and the rows for checkbox hidden.
I'm using the following code. It works great as long as I check and uncheck the same box before attempting to check another box. But if Checkbox18 is already checked with its rows showing, and I then check checkbox20, the checkbox20 sub runs and as I step through, it jumps to sub checkbox18.
How can I stop my subs from jumping from one to another?
Code:
Private Sub CheckBox18_Click()
If CheckBox18.Value = True Then
Worksheets("TRF").Rows("36:41").Hidden = False
Worksheets("TRF").Rows("42:64").Hidden = True
Worksheets("TRF").Rows("65:76").Hidden = True
CheckBox19.Value = False
[Code] .........
View 9 Replies
View Related
Jul 3, 2007
Here in our department we made a pretty elaborate macro that takes a report and sorts them out to 17 different sheets in a one workbook. This Macro pulls a file from a specific location on our server and then opens the CSV sorts it out color codes all the important information and saves it back onto the server under you specific initials.
They are four PC's along with our Managers laptop that run this Macro daily.
About 3 weeks ago my Managers laptop stops running the Macro completely and hangs in the middle of the whole thing. Eventually crashing Excel.
We try to remove the modules and re-import them back into the personal macro workbork but this does not work. The Macro's did not change and still fully function on the other four desktops to this day.
I uninstall Office on my Managers laptop and reinstall. Import the Modules again and still hangs up in very same spot it did 3 weeks ago.
I've tried to lower the macro security to the lowest level also and I've still had no luck with this laptop. I don't understand. The Macro's function perfectly on other PC's but will not function on this laptop.
View 9 Replies
View Related
Jan 7, 2009
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
View 9 Replies
View Related
May 30, 2013
I have many Form Control Check Boxes that all link to another sheet on row 3.
I have many changes to make but only want to implement the change related to the check box.
This code works perfect when you manualy type true or false on row 3 but not if the check box makes the change.
Private Sub Worksheet_Change(ByVal Target As Range)
ThisCol = Target.Column
If Target.Row = 3 Then
RESULT = MsgBox(Cells(1, ThisCol) & " = " & Cells(3, ThisCol), vbOKOnly, "CLICK RESULTS")
End If
End Sub
Why does this not work when a check box changes the value in row 3?
View 5 Replies
View Related
Dec 3, 2008
i want to know how to assign a macro which will remove and place a number in a certain cell. so if i click and tick the box, then a certain figure will come into a cell(this will be a formulae) and when untick the the number will disappear.
View 4 Replies
View Related
Nov 3, 2009
- I have 2 checkboxes and I need run macro, if one of this checkboxes are checked (if checkbox1 then run macro, if checkbox2 then run macro2)
- If this checkbox is checked run macro every "xy" minutes, and this "xy" is written in cell I1 (for checkbox1) or I2 (for checkbox2)
I add my excel for better understanding
View 11 Replies
View Related
Jul 19, 2006
When I click this button, a new row is inserted. Depending on whether this checkbox is checked, I want some of the formulas to adjust.
Public Sub AddEntry()
thisone = ActiveSheet. Name
FinalRow = Range("A65536").End(xlUp).Row
Range("A" & FinalRow + 1).Select
Selection.EntireRow.Insert 'just inserted a new row
x = Range("T1").Value
Sheets("Calculator").Select
Rows(x + 3).Select
Selection.Copy
Sheets(thisone).Select
Rows(FinalRow + 1).Select...........................
View 3 Replies
View Related
Oct 18, 2007
I wrote a macro so that if a checkbox is "true" it will print and if it is "false" then the checkbox will not print. I want to do that on many other checkboxes but with this approach the number of macros will have to be equal to the number of checkboxes. I was wondering if someone here by writing one macro that will do the trick and i can assign to as many checkboxes as i want. my macro is
Sub proPaintRALPEnd()
Application.ScreenUpdating = False
On Error Resume Next
If Range("l78").Value = "True" Then
ActiveSheet.Shapes("Check Box 697").Select
With Selection
.Placement = xlMove
.PrintObject = True
End With
ActiveSheet.Shapes("Text Box 698").Select
With Selection
.Placement = xlMove
.PrintObject = True
End With
Else...............
View 2 Replies
View Related
Mar 12, 2008
I have a checkbox and a command button on my sheet. I want that, depending if the checkbox is marked or not, I can call two different macros. I don't know if this is possible at all or maybe can be done easier otheriwise, but this would more or less be my idea of what should happen:
Private Sub CommandButton1_Click ()
' If CheckBox1 = marked
Call MacroA
'Else (CheckBox1 = unmarked)
Call MacroB
' End If
End Sub
View 4 Replies
View Related
Dec 14, 2008
How can i hide and unhide one checkbox using another one? Can it be done using IF formula?
And also i am using this checkbox to function something else as TRUE/FALSE.
View 6 Replies
View Related
Mar 18, 2014
I currently have the following Macro for one of my many checkboxes in 2007 Excel:
[Code] .....
It works perfectly until additional rows are added/deleted before the indicated rows in the code (It changes the number sequence in the workbook). The number sequence stays the same in the code which means I am now hiding rows either before (delete rows) or after (insert rows) the intended rows I want to be hidden. Is there a way to change the above code to remain with the assigned rows regardless of the adding/deleting of rows before it?
View 1 Replies
View Related
Dec 19, 2006
Can i run a macro by just the pointer going over it.
View 9 Replies
View Related
May 28, 2008
I am trying to allow the Command Button when clicked to go through multiple conditions before making a decision. So, when someone clicks on Command Button 3 the code should look to see if CheckBox1 is true, then it should check today's date, and if it is between a range of days, or even months, then it would add the number in TextBox1 with the amount already in cell H18. This event will happen every time someone clicks on the Command Button.
The end result is to have several sheets (4 total) for each quarter in the fiscal year, and if the dates are within those parameters, the clicking of the command button will update the correct sheet.
View 9 Replies
View Related
Apr 10, 2014
I'm trying to get a macro to run when the user presses the save button. I have the following code:
[Code] .......
This code is supposed to apply the TRIM function to every worksheet in the workbook when the user presses save, and the saves the results. I understand the Private Sub bit is the code to have the macro run during the save, but for some reason the macro itself isn't actually running. I'm not getting any error message, its just that the cells which should have the TRIM function applied to them aren't being corrected.
View 4 Replies
View Related
Mar 10, 2014
I have a macro that takes about a minute to run. I would like to add a progress bar to appear once the macro starts running. There are no loops in the macro. What are my options?
View 3 Replies
View Related
Mar 17, 2014
I have 3 different sheets with a private sub on each all labelled
Private Sub CommandButton1_Click()
The macro's runs fine on each page.
I want to put a macro on a separate sheet that i can run each of those macro's
I did initially copy the original private macro and change the
Private Sub CommandButton1_Click()
to
sub report()
But I couldn't do all 3 in the same manner. i did change each name to something different... the other 2 subs did run, but they didn't do anything except put the massage box on the end saying that "the macro has finished".
The private macros are on sheets 26, 28 and 12.
View 3 Replies
View Related
Mar 25, 2014
I have 7 different workbooks as part of my daily routine.
At present the first workbook is opened via the task scheduler, and the macro is run using the following code
[Code] .....
This then opens the next workbook and closes the current one. The next workbook then runs its macro again from a timed call
[Code] ...........
This repeats for 7 workbooks. The problem is, if a macro overruns - the whole schedule is out of sync when macro's are called depending on the time. What I would like to do, is link each macro by calling for the next one, and closing the current workbook. However, when i have tried to do this, the macro has always stopped when the workbook has been closed - the next macro doesn't run.
View 2 Replies
View Related
Oct 3, 2007
Below is the entire code that I am using. It is a simple routine which checks whether a part has started its release process or not, based upon dates. The code works and does what I want.
The problem that I have is that it is very slow, for example it takes 35 seconds to go through 530 lines items. In my (limeted) experiance, based on other VBA doodlings this slow.
View 9 Replies
View Related
Jul 28, 2008
Is it possible to run a macro from an IF command?
View 9 Replies
View Related
Oct 8, 2008
I already have a macro made named (PowerPoint) that is saved to the wookbook. I am looking for a way to have this run every 20min. I have tried several differnt things and it did not work. Here is one I found online. I only need it to run when it is open and every 20mins. as long as I have it open.
View 3 Replies
View Related
Dec 18, 2008
I have 2 workbooks (Workbook1 and Workbook2).
Workbook 1 contains a button, that calls a macro. This macro calls a macro from Workbook 2.
For this, I am using the Application.Run function.
The Macro in Workbook2 is a simple one line macro that updates cell A2 to a value of 6.
Range("A2").Value = 6
This works fine!
However, I want the the cell A2 in WORKBOOK1 to change to 6, not the cell in Workbook 2.
To add an element of difficulty, Workbook 1 could have any name (I won't know what it is, as the user could change it).
How can I get the Macro in Workbook 2 (Called from Workbook1), to update the cells in Workbook 1.
View 12 Replies
View Related
Jan 11, 2009
I have a problem with a macro in Excel 2007. It invokes
solver and creates an answer report. Please find the VB
code for macro, below.
View 7 Replies
View Related
