Data Series On A Line Column 2 Axes Chart
Feb 15, 2007
Im plotting data on a Line-Column 2 Axes Chart which works really well with 4 data series (2 column, 2 Line) but when adding a fifth data series, the fourth disappears from view. I can see its still there cos I can display the values but I cant get the line to appear. The values for the 5th series are also similar to other series values so its not like the chart cant display it....are there limits to the number of series on such a chart?
View 9 Replies
ADVERTISEMENT
Jun 23, 2014
So I have this given: Screen Shot 2014-06-23 at 3.53.01 PM.jpg and I am trying to fit my data to the graph I have in excel below. There is only one x-axis; suction pressure. However, there y values are dependent on two variables, discharge pressure and outdoor air temp.
How can I make the data on this sheet: Screen Shot 2014-06-23 at 3.53.05 PM.png
dependent on both axes?
View 2 Replies
View Related
Jan 17, 2014
I am trying to produce a line chart, which will use imported data on a separate sheet (but within the same workbook)
The imported data can be of different sizes ie column widths and length. Some columns may contain only zero and should not be included in the chart, and will be to right of the data.
I have created a named range for the data series called ChartData using =OFFSET(Data!$C$1,0,0,info!$C$7,info!$A$2) - C7 and A2 are calculations to set column and row sizes. I have tried to use this as the chart's data series, but without success.
View 4 Replies
View Related
Dec 22, 2011
I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
View 4 Replies
View Related
Jan 8, 2010
I have data:
Jan Feb Mar Apr May
2009years 56 45 42 50 62 - series1
2010years 48 47 45 48 55 - series2
I need make line chart from 3 series. First two are series1 and series2. Third is percent change between 2010 and 2009 years every month (series3). First two are easy, but third is very difficult for me, becouse I haven't row with percent change and I can't haven't it in my exercise.
How can I make it without new row with percent change?
I tried it with Data Source in chart, also formula in Name Manager, but it doesn't succeed
View 9 Replies
View Related
Aug 25, 2006
I have a line Chart and want to create a static horizontal/indicator line.
I cannot create a new series to plot this horizontal line as I'm using an external data source (OLAP cube) as source data for the chart.
View 8 Replies
View Related
Oct 2, 2006
I am creating a line chart with markers using 5 series of data. I want to colour in/shade the area under the lowest series.
View 6 Replies
View Related
Sep 3, 2007
Is there a way to add comment text at a 45 degree angle to an excel chat?
What I need to do is to add a comment parallel to a 45 degree line on an excel chart, and the text box dosen't give you the option t have 45 degree text.
View 6 Replies
View Related
Jul 11, 2014
I'm trying to change 115 charts so that the Xvalue axes (Y-axes) will start on the lowest value of my data series. This is what I've come up with so far:
[Code] .....
What is the syntax to set instead of X so that all Xvalue axes is set to the lowest Data series value in individual chart?
View 6 Replies
View Related
Apr 15, 2014
I want to add a user-form on a chart, which will have check-boxes that will allow me to select series(lines) that I want see and compare in a chart. Currently my line chart has 24 series (Lines) which makes the chart very difficult to view and looks very busy. How do I add list of check-boxes that will allow me to select one or multiple lines that I want to see at a time?
View 2 Replies
View Related
May 31, 2008
I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
View 4 Replies
View Related
Jul 12, 2007
my VBA code does some simple editing. Something I would like it to do is make the x-axis and y-axis lines be editable. What I mean is say for editing the Plot area background you would use this
ActiveChart.PlotArea.Format.Line.ForeColor.RGB = RGB(0, 0, 0)
I am looking for the equivalent to do the x and y axis lines.
View 4 Replies
View Related
Oct 11, 2006
I've got an excel worksheet that contains charts 5-14, each with different max axes on primary and secondary scales. Right now the code below works to adjust the axes, however I have pasted this into a script 10 times, once for each chart with different references to the chart number, the max primary axis and max secondary axis. how I could write the following as a loop so that I don't need to have to repeat this routine in my code?
Sub ChartsBillingsShare()
ActiveSheet.ChartObjects("Chart 5").Activate
With ActiveChart
.HasAxis(xlValue, xlPrimary) = True
.HasAxis(xlValue, xlSecondary) = True
End With
ActiveChart.Axes(xlValue).Select
With ActiveChart.Axes(xlValue)
.MinimumScale = 0
.MaximumScale = Range("Y6").Value
End With.................................
View 4 Replies
View Related
Feb 15, 2012
I am trying to overlay a line chart on top of a stacked column chart. The stacked column chart is a chart where the x axis is dates and the y axis is amount. The line chart is a projected amount that I will reach in few years; the x axis is the date while the y axis is an amount. I can get a chart that has a line and stacked columns, but ever time, the dates get messed up. The line has an extremely wide date range while the columns only have about a month of data.
View 9 Replies
View Related
Feb 23, 2010
I'm trying to create a code that when run hides a selection of columns and defines the minimum and interval value for a chart on the active worksheet. My attempt is assigned to the 'update skills' button at the top of the "GRAPH" worksheet of the attached workbook.
View 2 Replies
View Related
Sep 15, 2014
In the attached file I have the data which shows me the market size in value, my market share in value & I did a calculation to get the percentage. What I need is a chart that shows me the market size in column graph, my market share in line graph and I want the percentages to be showing also.
View 3 Replies
View Related
Jun 30, 2008
I have a chart with 3 data series. The series are located in columns A, B and C respectively. Series I is a general number anywhere from 0 to 100,000. Series 2 is also a number, but is is devided by series 1. So, if series 1 was 100,000 then series two would be 25,000/100,000 which is 0.25. Series three will always be numerator of series 2 or 25,000 in this example. The numerator, or the 25,000 will never change, so, in my example, series three will be a straight line across the chart because it is always 25,000.
In my example, the .25 is plotted on the left value axes, and series one is plotted on the right value acccess (secondary axis). Series three is just a line in the middle.
My problem is that sometimes the line, series 3, doesn't match the values in both the right and left values axes. So, if series one is 48,000, then series two would be 48,000/48,000 = 1, and series three would be 48000 - the straight line. The third series should be a line touching the 48,000 on the right and the number 1 on the left. It does touch the 48000 on the left, but is below the number 1 on the left.
View 9 Replies
View Related
Nov 27, 2011
I am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2)
these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
View 1 Replies
View Related
Sep 27, 2011
I am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.
I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.
Example Below:
Column AColumn B Column C159261037114812
Now in the example all of the values are x values.
View 2 Replies
View Related
Jan 19, 2013
Using Excel 2010. I have a Column Chart that shows 3 data series by month for one year
How can I customize the chart to group the data series on the X-Axis and repeat the 12 month series 3 times on one chart with one X-Axis to show each data series as a group?
View 5 Replies
View Related
Nov 9, 2006
Trouble: I need to replace address of datacells for serias of chart
Result: data for serias will be some lines above or below as i need
simv = Workbooks(1). Names("adr").RefersToRange.Formula
num = Len(simv)
For i = 1 To ActiveChart.SeriesCollection.Count
oldadr = ActiveChart.SeriesCollection.Item(i).Formula
res = Left(oldadr, Len(oldadr) - num - 3) + simv + Right(oldadr, 3)
ActiveChart.SeriesCollection.Item(i).Formula = res
Next i
simv - my new address data for all serias this code is working on Excel 2003, but not working on some other versions. Beause "Formula" may has different structure :
version 2003: =SERIES(,,'C:...[macros.xls]Sheet2'!$B$8:$M$8,1) other version:
=SERIES('C:...[test.xls]#Source'!$C$6:$D$6,'C:...[test.xls]#Source'!$E$2:$AC$2,,1)
View 3 Replies
View Related
Oct 25, 2007
I have a chart with Data Series being dynamic ranges. There is only one series and x & y each have a dynamic range. I need to be able to include Series Name as a dynamic range.
For example. I have 3 rows of values with 3 columns.
Col 1 Col 2 Col 3
Name X-Val Y-Val
A 1 3
B 4 6
C 8 0
I now need a chart that has 1 series with a x range of col2 and a y range of column 3 but a corresponding name equal to Col 1. So when I move my mouse over each point I get the series name. E.G. I hover over poing 1,3 I show the name as A. Or I hover over point 8,0 I get C.
If it isnt possible using the ranges the way I am, then I would be looking for a possible solution. I am sure I could do this by some sort of loop but not quite sure given the number of rows constantly changes.
View 7 Replies
View Related
Aug 4, 2014
I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
View 1 Replies
View Related
Apr 10, 2014
I have a data series plotted as columns. Then I want a horizontal line at $5,000 to appear all the way across the chart. It appears from the 1st to the last data point, but there is blank space before the first point and after the last point. I would like the red line to extend into this blank space before and after, so that it is going across the entire chart.
I tried playing around with different axis settings and no luck.
View 2 Replies
View Related
Nov 9, 2006
Here's a sample of a chart that I want; However, I want the bar chart to be a stack chart as I have multiple "Failure modes" per month that I want to show the number(or count) of failures per month. Then I want the line chart to remain the Complaint Rate for that month.
I just can't seem to figure it out.
This chart pulls from a data set that looks something like this: ....
View 9 Replies
View Related
Sep 16, 2006
is it possible to reference part of a data series from a chart to a combo box?
View 3 Replies
View Related
Oct 5, 2006
I want the below code to run from R1C10 (i.e. cell J1) to the end of the data in the row, which will vary in position, rather than having to define where the end of the row will be beforehand (i.e. R1C21).
Is this possible?
View 9 Replies
View Related
May 23, 2008
I have data which is imported from a txt file and always starts at the same row (R19) but is variable in length (end of data R??). I want to be able to select the chart xvalues (R19C10:R?C10) and values (R19C4:R?C4) based on the number of cells with data in them for a given column. In addition I believe I'm having troubles with sheet references, when the txt file is opened the sheet name is set to the file name, since I want to use this macro on many different files I need the sheet referencing code to account for this. Anyway here is the section of code which seems to be giving me trouble (the initial sections just create a new column of data which needs to be referenced as the xvalues) ...
View 3 Replies
View Related
Jun 28, 2008
I think that this is probably rather simple, but the answer is eluding me, I cannot find anything that helps online either. I have a set of data that looks similar to the sample below, however it is quite a bit longer. I would like the 'Effect' as the X axis, with the 'Score' as Y. This basically shows three columns, which is fine. However I would also like to use the 'ID' as the label against each plot point and I'd like each plot point to look the same.
The problem I am having is that to get the labels to show, I am having to add each series manually, which is rather time-consuming. Is there a correct (faster) way of doing this as I think I'm missing something obvious!
IDScoreEffect
12.11
21.92
31.33
41.81
51.53
61.72
72.33
81.42
92.21
102.13
112.12.................
View 2 Replies
View Related
Aug 21, 2006
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
View 9 Replies
View Related
