Check Box Value In Form
Aug 26, 2009I am trying to use a check box in my form. how do i check whether a specific check box is Selected or deselected?.
View 2 RepliesI am trying to use a check box in my form. how do i check whether a specific check box is Selected or deselected?.
View 2 RepliesI'm trying to use a VB code to insert check box in excel. I have 1000 records and i need to insert 1000 cehck box. I know how to do it manually for few but to do it for 1000 that just going to take too long.
View 9 Replies View RelatedI would like to create a form to select some columns from a list of columns.
This could make it simpler for an end-user to chose which columns they want to see in my application.
(see my previous question: [url]
Ideally, I would prefer to do that just like rows can be selected in an Excel list.
However, I doubt this could be done.
So, to be practical, I would put a button on my sheet.
When the user clicks the button, a form would appear and show the current list of columns.
The user would mark or unmark to define his view and click ok to get the sheet with only the columns he wants.
The number of column in the table can change.
When the form loads it must determine what are the columns to include in the list (headers).
What I really don't know is which controls I should use on the form?
Are there some list control with tick marks available, for example?
Or, I might dream of a mark-enables combo box or list box, as can be seen often on the web.
1. I have text message on Excel Sheet 1. I have designed a form that has Multiple Check Boxes. Primary, CO-applicant and Co-signer vertically placed. And I have 3 Check Boxes that have been placed Horizontally Alerts, Public records and Mismatch Information.
What I am looking is I should be able to Pick 1 or all the 3 from Vertical Check Box which would be Primary, or co-applicant and Co-signer and also appropriately pick any from the Horizontal Check Boxes Alerts, Public Records and Mismatch Info.
For example: I the Text Box1 below should appear like this:
Primary: DOB Mismatch or and Bankruptcy any of those options.
Similarly for Co-applicant and Co-signer.
2. I have a Text Box2 on Comments page. The information from Text Box 1 Appears in Text Box 2. Once the form is run I am unable to make corrections if any in Text Box 2. Is it possible for me to edit the test that is copied in Text Box 2.
On the attached workbook i have a simple form with text boxes and a enter button and cancel button.
So far, i have only got as far as the cancel button closing the form. I want to know what i have to do to enter each of the fields in to the cells written on the form. Also when i do press the enter button, if any of the fields are not entered then a message box must appear notifying the user all the fields are not entered and then finish by taking them back to the form.
I'm missing something in my UserForm initialization code. If I fill the form out once and click 'OK' (run the code to put the form data into a sheet), when I go back into the form all the old info is still there. If I then click 'Cancel' (Unload Me) and reopen the form, the old data is cleared out. What am I missing to make it clear it out the first time?
View 2 Replies View RelatedI'm having trouble trying to come up with a way to insert data fields into a spreadsheet form. I have a travel authorization form that I would like to have automatically fill in the required fields based on typing in a name. i.e. I would type in an employees name, and it would automatically fill-in the correct address, etc for that employee. I have attached a spreadsheet that contains one sheet as the form, and another sheet containing the employee data. I know nothing about VBA, but I have a feeling that is where I need to go.
View 3 Replies View RelatedI am needing to create a form that exports data (a quote) to an Excel Db (table) and is then able to recall the data back into the form. (the default form in excel does this and I want to copy that.)
Once the data is called back in, I can then export it to another Table to show that the quote has been approved and will be used.
I am having trouble with the VBA coding that copies the inputted quote in Cell C2 (the reference for the quote number) of the "Form" sheet and looks it up in the "Database" sheet. I have tried several variations of code, but nothing works so far.
-SS
Sub RecallQuote()
'
' RecallQuote Macro
'
Sheets("Form").Select
Range("C2").Select 'this is the cell that holds the quote number to look up from the table
[Code] ......
I have a spreadsheet I use to keep track of weekly sales patterns and use for estimating the amount of a product I would need to order taking into account what I would expect to sell in a given week and what stock I have at present. On the example I've attached, I show where I enter my storeroom count figures, which are organised by supplier and the position in which a particular product appears on the supplier's order form. I have a page which lists the orders by suppliers and which are used to place the orders by e-mail or telephone.
At present I have each supplier section of the order form directly linked to a cell on the storeroom count as per columns K to M on the attached file. However, this means that as products are de-listed by suppliers and extra products become available, I have to edit the formula in each cell as the products now appear in a different position on the storeroom count and may otherwise end up on the order form for a different supplier. I would like to set it up so that I just have to select the supplier name and the table below will automatically fill with the required info, in order of the position they appear on the supplier's form. I'm struggling to combine vlookup and hlookup. Is there a way to do it or do I need to rethink?
I'm trying to pull up a second form from a command button within a form. There's a command button in a sheet to open the first form (frmOrderInput.) Then there's another command button in that form to open the second form (frmPriceInput.)
The Module to open the first is this:
I have got a userform that fits my 24inch monitor screen perfectly, however it doesn't fit other screens. How do I get windows style scrollbars added to the form so people can use these to see the whole form?
View 3 Replies View Relatedfind the attached workbook
I have a Database and user form, in the user form i have a field named “Vehicle No” this is a combo box from which a user needs to select the Vehicle numbers, and all these are working fine now, I need your help in the following:
When user selects the second field named "Select Vendor name" i need a pop up window which shows all the Vehicles belongs to the vendor which they have selected, and with the popup window user selects the vehicle number then the Vehicle number combo box should be filled.
Currently users have to select by scrolling through Combo box which takes long time and difficult to find by scrolling.
I have two forms...clicking a specific button on the first form should display the second form which works fine.
VB:
Private Sub Image_Employees_Click()
Form_Main.Hide
Form_Employees.Show
[Code].....
When I do this twice, however, the second form seems to freeze/hang and I have to close Excel and then re-open it. I feel like I'm overlooking something obvious...
I have created a registration workbook for this year's youth sports league. All of the information is entered into a User Form and separated onto it's appropriate sheet designated by the child's age. Next year, I would like to use this year's workbook to look up returning players.
Will it be possible to add a "lookup" button into my form, or create a lookup program, that once the registrar clicks on the correct player, the information is plugged into the User Form, the registrar adjusts the age and any necessary info, presses enter, and the information is copied into the appropriate category in the new workbook? I haven't worked with User Forms long enough to know if they can be filled in that way, but if this can be done, you are the people who would know.
I'm using a series of user forms for data entry to a workbook, some of them open next stage user form on completion (OK cmd button).
All that is working fine, but I'd like the initial form to close on showing the next one. I've tried adding Unload and Hide commands following the frmInsertEntry.Show (Next stage form), to no avail, but I'd like this user form to close or hide at the end of the sub.
Private Sub cmdContinueType_Click()
ActiveWorkbook.Sheets("Records").Activate 'Select starting cell in record sheet
Range("N3").Select
Do
If IsEmpty(ActiveCell) = False Then ' Search for next empty cell
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
If optDrillType = True Then
frmDrillEntry.Show
Else
frmInsertEntry.Show
End If
End Sub
I have created a form that pops up using a macro when the form is opened. It is a simple form that uses optionbuttons in a group to select Intl or Dom.
Problems:
1) How do you get the form to close once a button is selected?
2) The user can close the form without selecting a button (the X at the top).
3) How do you get the data selected onto the excel spreadsheet?
I need to create a form that if you were to enter a name in the text box it would fill all the information across that row into other boxes on the form. Basicly if I type John Doe in the text box it would look in col A for John Doe and then put whats in the cells on that row into different boxes on my form. I have tried searching but I have had no luck. Im very new to forms so this is a great experience.
View 3 Replies View RelatedI have 2 forms. Form1 and Form2. I load Form1 to display. A button on Form1 calls Form2 to display. After I hit Cancel-Unload on Form2 it doesn't dissapear. How do I get rid of the residual image of pesky Form2 after I unload it and only display Form1 WITHOUT having to reload Form1 after Form1 calls Form2
In English
Form1 Displays
Form1 call Form2 to display
Form2 is unloaded by hitting a button on Form2
Form2 is unloaded, however, it's image still displays!!!
Need some way to force screen to refresh without having to unload Form1!
I have 2 different forms that I need info from one, added to the other.
The reason for this is to update pricing from a new file, into an older file with the same product code for each product.
on form 1(the one I want to keep), column x is price(that I want to update from form 2 column L), and column B is the product code(sku)
Now on form 2 Column L is the The customer price(this is the data I need moved over to column X on form 1. and column I is the UPC 10(sku) that needs to match the same sku(product code) on form 1.
Gee this sounds confusing aFTER i TYPED IT.. i HOPE THIS MAKES SENSE. i WILL ALSO ADD THE 2 FILES, SO YOU CAN SEE WEHAT I am talking about.
Please help as I have about 30,000 items total, and would take way too long to update prices manually every 2 - 3 months.
Im trying to loasd a pic of a userform using cell A1 as the referance for the file though i am going wrong somewhere.
View 13 Replies View RelatedI have a form with Option Buttons and once a selection has been made it opens the relevant sheet on the workbook but I can get it to open the relevant form to feed that worksheet once the selection has been made from the opening form. Is it possible to do this and if so dose anyone no the code.
View 3 Replies View RelatedMy company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####"
12 digit should be "###### ######"
13 digit should be "# ###### ######"
14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
I am using this code
View 5 Replies View RelatedI had a question earlier regarding how to call a form using a variable rather than the form name. This works correctly and the form is displayed, however the forms behaviour deviates from the code within the form.
I have attached a simple example which permits a user to determine where on a page a form displays, if called using the form name directly it functions correctly, appearing at the designated co-ordinates. If it is called indirectly using the variable it reaches the line
I am trying to create a form to use as a golf tracker. I basically have created a scorecard where I input the date, score, fairways in regulation, greens in regulation and putts. I want to be able to put that information just like if it was a scorecard and then have a button that says submit. Then that information is output into individual sheets (i.e. one for scores, one for fairways, one for greens and one for putts).
I want to have 1 check box affect 3 others in the following way: check box 1 if checked, allow check/uncheck of check boxes 2, 3, 4 if unchecked, uncheck boxes 2, 3, 4 and do not allow checking check box 1 is linked to D1 which starts with a value of false. cell E1 is if condition to have value 1 when D1 has value of true.
I have attempted to attach an example worksheet.
Test check control.xlsx
I am creating a userform with 10 checkboxes. The first 9 checkboxes are user options. I want the 10th check box to be a "Select All" option i.e. if the 10th checkbox is checked all the other 9 options are deemed to have been selected.
The way I want the display to work is that if the 10th checkbox is ticked all other checkboxes are cleared. Also if the 10th checkbox is ticked and any of the other check boxes is selected then the 10th checkbox should be selected.
I have tried coding this up but the checkboxes don't seem to operate as desired. I placed some code on the click event for the last option button to set the vlaue for all other buttons to false. This works but the 10th check box doesn't get ticked itself. When I try to code up the other bit I get similar issues.
I have the following code in Usertransfer and I actually want to Launch the userQuestions Form and Automatically Click the Prev Button? How can I achieve this?
Do I need to make things public?
UserTransfer
Private Sub CmdCancel_Click()
Unload Me
End Sub
UserQuestions
Private Sub CmdPrevQuestion_Click()
If m_QID = 1 Then..............
I have a form with several textboxes & comboboxes, I have a button on this form.
What is the code for label1 on userform2 to equal textbox1 on userform1 after i press the button ( i just need to konw how to refer to different forms)?