On the attached workbook i have a simple form with text boxes and a enter button and cancel button.
So far, i have only got as far as the cancel button closing the form. I want to know what i have to do to enter each of the fields in to the cells written on the form. Also when i do press the enter button, if any of the fields are not entered then a message box must appear notifying the user all the fields are not entered and then finish by taking them back to the form.
I've got one more problem to solve with my current project. An example of the workbook is attached.
What i want to do is change the code on my 'enter button' of the 'input form' which can be shown by clicking the 'Add New Hedge' button on the summary sheet.
The change i want to make is when the user clicks 'enter', if the 'settle now' checkbox is false to add the details of the form to the unsettled hedges form as it currently does.
If the 'settle now' checkbox value is true then i want the form details to be added to the next available row on 'settled hedges' worksheet, in the same way it currently does for adding into the next available row of the 'unsettled hedges' sheet. Also here, i would want the value of the 'returns' textbox added to be added into column L rather than the text "unsettled". This would also mean when the 'settle now' checkbox is true that the 'returns' textbox needs to have a value before adding any details.
I have a userform with 5 text boxes and a command button.
I also have a sheet with a large amount of data on it, arranged into sections with headings (sheet1).
The user will enter the section heading he desires into textbox1, then other data into all of the other text boxes. Then click the command button.
I need a code that will search sheet1 for the heading they entered into textbox one, then find the next empty cell BELOW the heading (in the same row). It will then put whatever the user entered in textbox2 into that cell, textbox3 in the cell directly to the right of it and textbox4 to the right of that one, and so on.
I have 4 textboxes that the user enters data. I then have a button on the user form.
i would like to write code so that when the user hits the button... Textbox1 data goes into active cell Textbox2 data into the cell below Active cell Textbox3 below it and textbox4 below it then close the user form.
Problem-1) i want to round off the digit in the same cell i,e. Formula in F12 should be included in D12.
Problem-2) i have entered a sample account.in this i want to post the data entered in day book into their respective sheets of jaya and supervision automatically.
I have produced a basic search/lookup facility on an Excel workbook that simply allows the user to enter a post code and some details will be returned using a vlookup. The document is going to be rolled out to a number of operational users so I want to basically 'lock down' everything I can in the document (basically everything except the data entry cell) and make it fool proof- I have locked all cells apart from the data entry cell and have made the file read only.
The only issue I am encountering is when the cursor is in the one 'unlocked' cell (i.e. the one the users will enter the post code into); it appears that you can break the document. For example, when the cursor is in the 'unlocked' cell, I am able to go to Tools > Options and change various settings including cosmetic colour changes but also cell calculation which breaks the lookup functionality. This is probably enabled as the cell is unlocked, but if I lock the cell, when I protect the document, it disables data entry!
if there is another way of providing this one cell for users to input data into for the vlookup to work whilst locking down the rest of the document to ensure that no-one can break it?
is there way way i can allow users to hit enter in a Userform to submit what they have? instead of haveing to tab over or click on a button? or even make enter run the button function?
I want is to enter a name and e-mail list through the form. The name is then entered into a column ‘E’ and copied into column ‘A” that automatically alphabetizes the list for a dropdown list and a column reference is entered in the next column ‘B’ using vlookup so the column references remain with the proper name.
Ideally when a new name is entered in column ‘E’, column ‘F’ is updated to the next column references, the name is copied to column ‘A’ and the lookup formula in column ‘B’ is copied down.
I need to create a form that if you were to enter a name in the text box it would fill all the information across that row into other boxes on the form. Basicly if I type John Doe in the text box it would look in col A for John Doe and then put whats in the cells on that row into different boxes on my form. I have tried searching but I have had no luck.
I've created a calendar user form, much like many of the examples I seen posted here. I've tried all that I could find but none would allow the user to use the Enter Key to make the selection like the mouse click.
I would like the use of the Enter Key to produce the same results as a Mouse Click.
What I am after is a user form that pops up when I enter ‘Y’ in cells in Column ‘L’ which displays the contents of the cells in that row e.g. if I enter Y in cell L2 a user form would pop up displaying the contents of cells A2 to M2
The A2 to M2 column headers are:-
First Name Surname Code Address line 1 Address line 2 Address line 3 Address line 4 Address line 5 Post code Telephone Comments
The user form can be Read only i.e. I do not need to edit the cells (although that would be good) as it will be used as a source document to input into another application, however, a ‘Print’ button to print the form would be beneficial. The only other button required would be a ‘Close Form’ option.
I am looking to create a form that when a user enters data in it, and clicks a save button it will submit that data into cell A2, and then with the next time the enter data it will submit that data to cell A3. I would like it to continue moving down a cell each time somone hits a "submit" button.
I have a calculation to do (see cell Q4 on image attached) where the variables to enter are s1,g1, s2,g2 etc.... In some cases I will only have s1 and g1 and the rest (s2,g2 etc...) will be zeros. As you can guess I cannot put 0's because I will get errors, however I can not either put a empty cell.
So this is why I want to create my first subroutine, where the variables will be from F5 to P5 and be able to drag down the formula to compute the same calculation for the lower rows.
I really know nothing about vba so here goes. I would like to enter data in a row with 4 cells of info. then hit enter and return to the first cell and move the row down. all four cells must have data entered. and all four must move down. i tried some code as below i found and i modified but it did not work as expected. this moved the row down when returning the cursor to A2. It also should not copy the data style of the top row.
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Target.Column <> 1 Then Exit Sub Application.EnableEvents = False
I'm trying to use a VB code to insert check box in excel. I have 1000 records and i need to insert 1000 cehck box. I know how to do it manually for few but to do it for 1000 that just going to take too long.
I would like to create a form to select some columns from a list of columns. This could make it simpler for an end-user to chose which columns they want to see in my application. (see my previous question: [url]
Ideally, I would prefer to do that just like rows can be selected in an Excel list. However, I doubt this could be done.
So, to be practical, I would put a button on my sheet. When the user clicks the button, a form would appear and show the current list of columns. The user would mark or unmark to define his view and click ok to get the sheet with only the columns he wants. The number of column in the table can change. When the form loads it must determine what are the columns to include in the list (headers).
What I really don't know is which controls I should use on the form? Are there some list control with tick marks available, for example?
Or, I might dream of a mark-enables combo box or list box, as can be seen often on the web.
I am trying to create a form to use as a golf tracker. I basically have created a scorecard where I input the date, score, fairways in regulation, greens in regulation and putts. I want to be able to put that information just like if it was a scorecard and then have a button that says submit. Then that information is output into individual sheets (i.e. one for scores, one for fairways, one for greens and one for putts).
I have included my budget so helpers can see it. I am trying creating a formula on mini-dashboard on A8 (Under the total budgeted amount) that will check the total budgeted amount based on the values I enter on the categories sheet. Of course it will be controlled using the drop down menu on A2 on mini-dashboard. I thought I had this working with a sumif function but it seems to have quit working.
1. I have text message on Excel Sheet 1. I have designed a form that has Multiple Check Boxes. Primary, CO-applicant and Co-signer vertically placed. And I have 3 Check Boxes that have been placed Horizontally Alerts, Public records and Mismatch Information.
What I am looking is I should be able to Pick 1 or all the 3 from Vertical Check Box which would be Primary, or co-applicant and Co-signer and also appropriately pick any from the Horizontal Check Boxes Alerts, Public Records and Mismatch Info.
For example: I the Text Box1 below should appear like this:
Primary: DOB Mismatch or and Bankruptcy any of those options.
Similarly for Co-applicant and Co-signer.
2. I have a Text Box2 on Comments page. The information from Text Box 1 Appears in Text Box 2. Once the form is run I am unable to make corrections if any in Text Box 2. Is it possible for me to edit the test that is copied in Text Box 2.
I have an excel file having the month wise model cost breakup e.g.Prod.Qty,CKD,Local etc.My problem is that I want to make a summary in a separate sheet showing the Input i.e. Model Code.If I give that input then automatic summary should be prepare.
Please refer attach file: Costing Table.xlsx‎
I this file,having 2 sheets.One is details and other is Summary sheet.
focus the cell no.C4 in the summary sheet.When,I give the model code then the summary should be ready from the details sheet data range, month wise.
I'm missing something in my UserForm initialization code. If I fill the form out once and click 'OK' (run the code to put the form data into a sheet), when I go back into the form all the old info is still there. If I then click 'Cancel' (Unload Me) and reopen the form, the old data is cleared out. What am I missing to make it clear it out the first time?
I'm having trouble trying to come up with a way to insert data fields into a spreadsheet form. I have a travel authorization form that I would like to have automatically fill in the required fields based on typing in a name. i.e. I would type in an employees name, and it would automatically fill-in the correct address, etc for that employee. I have attached a spreadsheet that contains one sheet as the form, and another sheet containing the employee data. I know nothing about VBA, but I have a feeling that is where I need to go.
I am needing to create a form that exports data (a quote) to an Excel Db (table) and is then able to recall the data back into the form. (the default form in excel does this and I want to copy that.)
Once the data is called back in, I can then export it to another Table to show that the quote has been approved and will be used.
I am having trouble with the VBA coding that copies the inputted quote in Cell C2 (the reference for the quote number) of the "Form" sheet and looks it up in the "Database" sheet. I have tried several variations of code, but nothing works so far.
-SS Sub RecallQuote() ' ' RecallQuote Macro ' Sheets("Form").Select Range("C2").Select 'this is the cell that holds the quote number to look up from the table
I have a Database and user form, in the user form i have a field named “Vehicle No” this is a combo box from which a user needs to select the Vehicle numbers, and all these are working fine now, I need your help in the following:
When user selects the second field named "Select Vendor name" i need a pop up window which shows all the Vehicles belongs to the vendor which they have selected, and with the popup window user selects the vehicle number then the Vehicle number combo box should be filled.
Currently users have to select by scrolling through Combo box which takes long time and difficult to find by scrolling.
I have created a registration workbook for this year's youth sports league. All of the information is entered into a User Form and separated onto it's appropriate sheet designated by the child's age. Next year, I would like to use this year's workbook to look up returning players.
Will it be possible to add a "lookup" button into my form, or create a lookup program, that once the registrar clicks on the correct player, the information is plugged into the User Form, the registrar adjusts the age and any necessary info, presses enter, and the information is copied into the appropriate category in the new workbook? I haven't worked with User Forms long enough to know if they can be filled in that way, but if this can be done, you are the people who would know.
I have two sheets, one is named "details" and other is "query". The data in sheet "details" is listed in columns A, B,C, then D is blank and again data is in columns E,F.G. (in text forms)
In the Query Sheet, wish to enter in A1 the value contained in A, B or E, F of "details" sheet, the result of columns C or G may appear in Column B1 of Query sheet and also if value is equal to C or G, the result of A,B, or E,F may appear:
