Check Value Of Current TextBox
Jul 27, 2007
I am trying to produce a useform to allow me to input some golf scores into Excel.
Therefore, I have many textboxes for entering the score for each hole and to make the input process very efficient I am moving the focus to the next textbox automatically when a single digit score has been entered. Unfortunately, although I hate to admit it
I do now and then have a double digit score and so I have a Checkbox1 which allows me to enter scores >9 if checkbox1 =false.
I can use the code below to check if the score is less or greater than 10 but I will have to enter it into 18 textboxes and change the name of the textbox details from IF Textbox1.value <... to IF Textbox 2.value < etc. I will also have to change the text according to the name of the next tectbox to allow me to set the focus.
Can anyone please advise how I can check if the 'current' textbox (which has the focus) is less than or greater than 10 without needing to know the name of the textbox?
Also, can I obtain the name of Textbox1 so that I can set the focus to Textbox2 ie Textbox1+1?
As stated I can use my existing code but I am sure there must be a more elegent way of doing this and I am trying to learn a little about VBA.
Private Sub TextBox1_Change()
If TextBox1.Value < 10 And CheckBox1 = True Then
UserForm1.TextBox2.SetFocus
End If
If TextBox1.Value >= 10 And CheckBox1 = False Then
UserForm1.TextBox2.SetFocus
End If
End Sub
View 9 Replies
ADVERTISEMENT
May 28, 2008
I am trying to allow the Command Button when clicked to go through multiple conditions before making a decision. So, when someone clicks on Command Button 3 the code should look to see if CheckBox1 is true, then it should check today's date, and if it is between a range of days, or even months, then it would add the number in TextBox1 with the amount already in cell H18. This event will happen every time someone clicks on the Command Button.
The end result is to have several sheets (4 total) for each quarter in the fiscal year, and if the dates are within those parameters, the clicking of the command button will update the correct sheet.
View 9 Replies
View Related
May 18, 2006
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
View 2 Replies
View Related
May 16, 2008
After seaching on this and other forums I have not been able to get an answer to this question. Also I know there are a lot of posts out there that sound like this, but none are the same.
My spreadsheet has multiple userforms, which has multiple textboxes. The textboxes are for dates. I have it set so when you double click in the textbox that it calls a calendar function.
Here is the problem.... After you click ok on the calendar form I want the date to go into the textbox that the calendar form was called from. The only way for me to get this to work is to create a seperate calendar form for each textbox that I call the calendar form from.
View 14 Replies
View Related
Oct 1, 2006
I have a spreadsheet that has a userform attached to it with text fields that enter additional data regarding each record. The userform takes these additional 5 fields and inserts them back into the spreadsheet, the final information to be exported back into Access. ( There are of course other ways to do this, but this is how my supervisor wants it done!)
My problem is that now that I can scroll through the spreadsheet without closing the userform, the userform doesnt show the current row's information as I scroll or change rows on the spreadsheet. It will only show the information that was in the row that it was on before i switched back to spreadsheet.
View 9 Replies
View Related
Aug 7, 2008
I have a Userform that allows users to add projects to a tracking sheet. If the project is a WIP, no 'Sign Off Date' needs to be entered. When the project is complete, I would like the user to be able to hit a shortcut key (while inside the user form, with the cursor in the 'Sign Off Date' textbox) to populate the 'Sign Off Date' textbox with today's date (i.e. like CTRL + ; does in Excel) rather than have to enter it manually.
View 6 Replies
View Related
Apr 14, 2013
I am looking for a text box code that works with a search userform.
Basically, I search using my userform find function and if there are more than one record found I want to be able to either:
1) have the records found appear in a listbox
0r
2) have the first record appear in the userform but a text box will show I am on 1 of X records and when I click a command button, go the next record, which will be 2 of x records and so on...
VB:
Private Sub cmbNext_Click() Dim FirstCl As Range
'first data Entry
Set FirstCl = Range("a2").End(xlDown).Offset(1, 0)
[Code] ....
This is the code for the button that goes to the next record but I am unsure how to relate that a listbox or text box that shows the record number I am on out of the total that there are.
I would also be looking for another button that goes back one record. So i am hoping it's as easy as reversing the code for the next record function.
I am not sure if the listbox that could show all I records and one can just be selected is easier than showing the textbox with the " 1 of X records".
View 2 Replies
View Related
Sep 15, 2007
I have 40 files in one folder which I named it as "CA" + month's name that I am working on. I need to do analyse these files monthly and save it under new folder. how do I automatically save them in new folder and name them for that particular month. Also, each file has worksheet which has one cell as "Aug-07" and the cell next to it has number of that month that is "08". How do I automatically change this also based on the name of the file, because file name month and month in the cell are the same.
View 9 Replies
View Related
Aug 26, 2006
I need to check if value entered in a textbox in a userform, linked to cell in the worksheet was not entered already in other textboxes in the same userform.
View 9 Replies
View Related
Aug 30, 2006
In a userform I have 2 textboxes date1 and date2 (data from calendar1 userform2). I want date2 always to be higher than date1.
View 7 Replies
View Related
Jun 6, 2013
I have a set of text boxes in my sheet. I was wondering if there is a way to perform a spell check on the textboxes only (not the cells in the worksheet).
I have tried searching the code on the forum, found some which are using 'MSForms.TextBox', dont know why I am getting error.
How to perform the operation using Oleobject.
View 9 Replies
View Related
Jul 23, 2012
I need to confirm that a date is entered correctly into a userform.
This code works for a command button, but not for a WorkSheet_Change event.
My textbox is the first in the userform, and needs to be checked immediately, as the labels in the rest of the userform all change to reflect the date that was entered.
What is the best way to do this? I tried a keycode = vbKeyReturn option, but cannot get it to work?
Code:
Private Sub DateCheck()
Dim DateString As String
Dim DateProper As Date
Dim EntryOK As Boolean
EntryOK = False
[code]....
View 8 Replies
View Related
Apr 15, 2007
I have a userform that lets the user input a quanity. The check box will allow the total in textbox5 to be placed in another cell once the Accept buton is clicked. My problem is when the checkbox is checked, I cant get the total in textbox5 to cell E27.
Im sure this is not hard, but giving me a fit. :x
Private Sub Accept_Click()
Call AllGood2
End Sub
End SubPrivate Sub cancel_Click()
Unload Me
End Sub
Private Sub CheckBox1_Change()
If CheckBox1 = True Then CheckBox1 = TextBox5.Text
End Sub
Private Sub TextBox1_Change()
Call totalTextBoxes
End Sub
Private Sub TextBox2_Change()
Call totalTextBoxes
End Sub
View 9 Replies
View Related
Oct 17, 2006
Is there a way to see if a textbox is blank.. what I mean is, there may be some spaces in the text box which make it seem that there is something in the Textbox but all they are, are blank spaces.. no numbers in otherwords..
On a userform I have a textbox7 to enter in only the last 4 digits of the persons shop phone #. I have it coded that if the textbox isn't empty, it will put the required extension "X-" in front of it to identify it as a phone extension. If the cell is empty, it will remove it so it doesn't put the X- in the database without a phone #.
Finally the problem, if there are spaces in textbox7, no numbers, it will think that something is in there and put X- .. this messes up the database.
How do I check the textbox to see if it has numbers in there.. This is my code now...
' If TextBox7 is empty Then Phone = Blank
If TextBox7.Value = "" Then
PhoneC = " "
Else
' Preps Phone number with X- for extension
Fourdigit = TextBox7
Plus = "X-"
PhoneC = Plus + Fourdigit
End If
View 5 Replies
View Related
Nov 10, 2006
I am trying to have a macro to take a value from a text box and see if it is matches a value that is in a specified range. If it comes back true then it shows an error message. This code is working for text values, but if it is numeric it will not find find it.
Sub SearchForMatch()
'Procedure level declarations
Dim rngCell As Range
Dim bMatch As Boolean
' Loop through each cell in the nominated range
For Each rngCell In Range("B4:B50")
'If there us a matching value then set your
'boolean flag to true and exit the loop
If rngCell.Value = TextBox1.Value Then
bMatch = True
Exit For
End If
Next
'If a match was found then alert the user
If bMatch Then MsgBox ("Name already exsists.")
End Sub
View 4 Replies
View Related
Dec 29, 2006
iam trying to get a messagebox to notify the user that the text he has entered into the userform textbox is already in use in a sheets column. this is what i have been trying to get to work
Private Sub txtID_Change()
If Sheet3. Range("a8:a1000") = "B" & txtID.Value Then
MsgBox "Text already in use, Please use different text"
End If
End Sub
View 4 Replies
View Related
Dec 8, 2009
If I enter into a textbox1 the following 09/31/2009 the result is that its not a date (because there is only 30 days in September - not 31). OR if I put in "13/25/2009"
Can I have a macro that checks whether or not its a valid date and if so a message box appears that says:
"Invalid date"
View 9 Replies
View Related
Feb 10, 2012
I have userform with date pickers and have text boxes overlaid on these, when I select todays date from the date picker it does not display the current date in the text box (I have 8 date pickers on the userform). If I select another date then reselect the current date it works. It has occasionally worked but why.
Below is the code for populating the text box from the Date Picker.
Private Sub DTPicker1_Change()
TextBox1.Value = DTPicker1.Value
End Sub
The initialize userform code uses the following to format and set the textbox
Code:
TextBox1.Value = Format(Date, "dd-mmm-yy")
TextBox1.Value = ""
Windows 7 with Excel 2010
View 7 Replies
View Related
Nov 2, 2008
I'm trying to add a textbox at the current position (selected cell) with a set size, fill color, and border color. I found this: http://msdn.microsoft.com/en-us/libr...8(VS.80).aspx:
View 2 Replies
View Related
Jun 25, 2008
I have a user form that when a command button is clicked it enters the data from the from into coloums a,b,c,etc. I have code to do this but I want to add code to add a static date in coloum B based on if coloum A had data entered from the form. I need the date not to change to current date when the file is reopened. I am trying to elimate a date text box in the form. I have a link to the file http://www.box.net/shared/zdtsjv0qos
View 7 Replies
View Related
Jan 6, 2013
I have series of data values like below. I have to find Maximum, Minimum values for each of these values.
9430
9822
10070
[Code].....
View 2 Replies
View Related
Dec 28, 2013
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
View 1 Replies
View Related
Jul 3, 2014
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
View 3 Replies
View Related
Feb 2, 2010
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
View 11 Replies
View Related
Jul 25, 2014
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
View 1 Replies
View Related
Feb 7, 2007
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies
View Related
Nov 27, 2009
My company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####"
12 digit should be "###### ######"
13 digit should be "# ###### ######"
14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
View 9 Replies
View Related
Aug 10, 2012
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
View 1 Replies
View Related
Oct 27, 2008
EXAMPLE: Complete Sheet called "Day1". When day1 is complete you click on button and it then copies itself and creates and renames new sheet to "Day2", then when "Day2" is complete you click on button and it then copies itself and creates and renames new sheet to "Day3", and so on and so forth to "Day30".
View 9 Replies
View Related
Oct 12, 2011
Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
View 1 Replies
View Related
