Textbox That Shows Current Record Number Or Listbox To Show All Records
Apr 14, 2013
I am looking for a text box code that works with a search userform.
Basically, I search using my userform find function and if there are more than one record found I want to be able to either:
1) have the records found appear in a listbox
0r
2) have the first record appear in the userform but a text box will show I am on 1 of X records and when I click a command button, go the next record, which will be 2 of x records and so on...
VB:
Private Sub cmbNext_Click() Dim FirstCl As Range
'first data Entry
Set FirstCl = Range("a2").End(xlDown).Offset(1, 0)
[Code] ....
This is the code for the button that goes to the next record but I am unsure how to relate that a listbox or text box that shows the record number I am on out of the total that there are.
I would also be looking for another button that goes back one record. So i am hoping it's as easy as reversing the code for the next record function.
I am not sure if the listbox that could show all I records and one can just be selected is easier than showing the textbox with the " 1 of X records".
View 2 Replies
ADVERTISEMENT
Oct 1, 2006
I have a spreadsheet that has a userform attached to it with text fields that enter additional data regarding each record. The userform takes these additional 5 fields and inserts them back into the spreadsheet, the final information to be exported back into Access. ( There are of course other ways to do this, but this is how my supervisor wants it done!)
My problem is that now that I can scroll through the spreadsheet without closing the userform, the userform doesnt show the current row's information as I scroll or change rows on the spreadsheet. It will only show the information that was in the row that it was on before i switched back to spreadsheet.
View 9 Replies
View Related
Jul 4, 2012
I am trying to show the number of years in the userform textbox based from today's date and into the date the eqpt was installed. I stuck with the below code.
Code:
Private Sub DTPicker1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If TextBox1.Text "" Then
TextBox2.Text = Year(DTPicker1.Value) - Year(TextBox1.Text)
End If
End Sub
Where in textbox1 I have this code that activates on userform initialize
Code:
If Me.TextBox1.Value = "" Then
Me.TextBox1.Value = Format(Date, "dd.mm.yyyy")
End If
End Sub
Textbox2 is where I want the number of years to appear .
View 1 Replies
View Related
May 30, 2014
We have multiple work orders per opportunity, and each work order has a date. I have a sheet of these work orders which shows the work order #, work order date, and opportunity date. What I want to do is add a column which reports the work order date if it is the earliest instance of a work order for the opportunity (said differently, the first work order for the opportunity). Is there a way to write a formula to report whether the date of the row is the earliest date for a given opportunity, all in the same table?
View 1 Replies
View Related
Oct 16, 2008
Through a query I extract data from an oracle database. This database creates a record for every unique Article_Batch_Pallet_Faultnumber combination. Through a filter macro I create a new format on a different worksheet which creates a record for every uniqe Article_Batch_Pallet combination. I need a searchfunction to get the faultnumbers in the same row.
View 2 Replies
View Related
Mar 12, 2009
I get some records from XML and display in the sheet. Now, I need to put an image for each record in the sheet while displaying records. And also on click of the image I need to have some code to be executed.
View 5 Replies
View Related
Sep 22, 2008
I would like to combine values from multiple records into a single record using a unique identifier. In the example below 'ID' is the unique identifier.
For example:
View 3 Replies
View Related
Apr 21, 2013
I have a spreadsheet to track events (servicing, repairs, fuelling, etc) for my car - dates in Col A, events in B, mileage in C, prices in D.
I want to return the mileage when the next service is due, based on the mileage of the last service. Using VLOOKUP set to FALSE returns the first service mileage; set to TRUE, it returns random values. The events in Col B repeat in a random order (e.g. fuel, fuel, service, fuel, repairs, fuel, fuel, service).
View 4 Replies
View Related
Apr 17, 2009
I know this is a simple question for all VBA droids...I guess the challenge is in how quickly I'll receive an answer. I hear the turn-around time on this board is pretty impressive. So here goes...
What is the VBA code for recording the current date without the date recalculating when the form is re-opened. I know the formula for automatic entry [=today()], but I need the date to stay the same. I can assign the date to any cell, so you may theorize any cell in the code. Remember...the trick is getting the date to stay the same once it's been automatically entered.
View 9 Replies
View Related
Jul 23, 2009
In some cases an Access DB query will return only one record (by design). When this happens, and only when this happens, my listbox displays each of the values in a seperate row instead of just on one row.
i.e. My query will return 8 values per record. If there is only 1 record returned, the listbox shows each value on a seperate row instead of on one row in 8 columns.
The listbox works as intended when there are 2 or more records. I am now stuck. Pardon the ugly code. "questionaires" is the name of the listbox. "record_array" is the variant array containing the records.
View 4 Replies
View Related
Jun 7, 2007
I am using a User Form to input data to a spreadsheet and have an issue. I've set the TextBox WordWrap & MultiLine Property to True and the textbox values don't show the reverse P character, but how do I get the "square" from populating into the cells on my worksheet? I was using this old thread as a point of reference, but didn't understand how to use or where to put it in my form. I'm referring to the code that Dave Hawley supplied. Strange Characters Pasting to Textbox
View 5 Replies
View Related
Mar 27, 2014
I have the following bit of code that runs and is working MOSTLY correct. The code looks at the value of the combobox, loops through a range, finds the values in the assigned range that match the value in the combobox, and then adds the items to the listbox in multiple columns.
As I said, the code is MOSTLY working correct. Everything works, okay, except that only the first records shows up.
It's counting correctly, as I also have a label that does a listcount that is displaying the correct number. The problem is, that all other 95 records (the value I am searching in the combobox I have confirmed relates to 96 records) except the first one show as blank.
Code:
Sub cmbVolumeSKUs_Change()Dim r As Range, rAll As Range
Dim sTerm As String
Application.ScreenUpdating = False
sTerm = frmL.cmbVolumeSKUs
With Sheets("Volume Pricing")
[Code]...
EDIT: After reviewing the code line by line, it looks as though each new record is actually overwriting the first row. The record count is accurate, but each record found is being overwritten by the next. How can I get by this?
View 1 Replies
View Related
Jul 20, 2009
I am trying to populate a 3 column listbox in a userform from SQL Server via ADO. When the result set consists of more than one record, there is no problem and the data is displayed properly (ie each piece of data is in its appropriate column) eg...
StockCode..........QtyReqd.........JobDeliveryDate
test1...................1................. 01/01/1900
test2...................1..................31/12/1900
test3...................3..................18/02/1900
however when the recordset returns only a single record, the data does not transpose and views as below (ie each piece of data in the record is on a different line in the first column
StockCode...........QtyReqd.........JobDeliveryDate
test1
1
01/01/1900
View 12 Replies
View Related
Aug 5, 2009
I have set up a simple form in excel, whereby people use drop down menus to select the appropriate information (as all data inputted needs to be entered in exactly the same way to allow sorting, counting etc) so I thought drop downs were best. The trouble is the data is carried through to my excel database (on another worksheet) were it is shown in numeric values dependant on how far down the drop down list the select item appears (ie "Fareham" is third on the list, so shows in the database as "3").
I'd very much like my database to be easier to read and actually show Fareham etc, rather than be populated with lots of numbers. I initially tried using IF function (ie =IF(C3=3,"Fareham") but unfortunately two of my drop down lists are too long for this (with 25 and 33 entries respectively).
View 4 Replies
View Related
Mar 19, 2014
Win7/2010
I have an array PeopleList(6,320) that contains
PersonID, FirstName, LastName, Email, Phone, Notes
What I'm trying to do. I have two separate requirements:
(1) To add the whole array to a listbox on form initialization - see Sub UserForm_Initialize()
(2) To clear the listbox and re-add only certain items based on what's typed in a textbox - see Sub txtSearchTerm_Change()
I have two errors:
Error 1 in UserForm_Initialize()
The listbox contents need transposing! It is displaying as
Code:
1 2 3 4 5
Tom Ben Heidi Julie Mark
Smith Jones Evans Simpson Petersen
x@yo.com a@bo.com c@do.com e@fo.com g@ho.com
02071001022 02071001026 02071001027 02071001028 02071001029
Friend
When it should be displaying as
:
Code:
1 Tom Smith x@yo.com 02071001022 Friend
2 Ben Jones a@bo.com 02071001026
Is there a way to transpose the array?
Error 2 in txtSearchTerm_Change()
I cannot find anywhere - even on MSDN - all the information I need how to correctly add a single record to a multiple-column listbox! What I'm trying is:
Code:
For i = 0 To UBound(SearchList) If InStr(1, SearchList(i), SearchTerm) 0 Then
With lstPeople
.AddItem
For j = 0 To UBound(PeopleList, 1)
.List(c, j).Value = PeopleList(j, i)
[Code] ......
How do I add a record to the listbox????
Full code for reference:
Option Explicit
Private PeopleList As Variant
Private SearchList As Variant
Private Sub UserForm_Initialize()
[Code] .......
View 5 Replies
View Related
Aug 14, 2008
Following is the excel database. B11 is the dropdown menu. When I select the team from drop down menu. it shud give me sorted Name list from B12. I tried the following formula: =IF(INDEX($C3:$E$11,MATCH($C$12,$D3:$D$11,0),2)=$C$12,INDEX($C3:$E$11,MATCH($C$12,$D3:$D$11,0),1)," ")
But it is repeating the name or leaves the cell blank ( which i don't want). When I select Team1 it shud give me Names : a,d,e (without blank cell), Even i tried Array and some vba programmimg but it ...........
ABC
1SrNameTeam
21aTeam 1
32bTeam 2
43cTeam 3
54dTeam 1
65eTeam 1
76fTeam 3
87gTeam 3
98hTeam 4
10
11Team 2
12b
13b
14#N/A
15#N/A
16#N/A
View 2 Replies
View Related
Mar 28, 2014
I am working on sheets("TO")
I want to popup a userform when i want to show the records
Show records condition
if Q3 is greater than > 0
View 6 Replies
View Related
Jan 21, 2008
how do you place 100/0 so the /0 stays static and the 100 can be used to operate? (ie: 100/00, 101/00, etc)
View 5 Replies
View Related
Feb 24, 2009
I am trying to populate a listbox in a userform with only certain data. Currently I am able to populate all rows in a worksheet but I need to have only rows with the current date to show. In col A is the date and col B is a persons name.
View 3 Replies
View Related
Jun 19, 2014
Why auto filter does not show all the records in drop down menu ?
View 2 Replies
View Related
May 16, 2008
After seaching on this and other forums I have not been able to get an answer to this question. Also I know there are a lot of posts out there that sound like this, but none are the same.
My spreadsheet has multiple userforms, which has multiple textboxes. The textboxes are for dates. I have it set so when you double click in the textbox that it calls a calendar function.
Here is the problem.... After you click ok on the calendar form I want the date to go into the textbox that the calendar form was called from. The only way for me to get this to work is to create a seperate calendar form for each textbox that I call the calendar form from.
View 14 Replies
View Related
Jul 27, 2007
I am trying to produce a useform to allow me to input some golf scores into Excel.
Therefore, I have many textboxes for entering the score for each hole and to make the input process very efficient I am moving the focus to the next textbox automatically when a single digit score has been entered. Unfortunately, although I hate to admit it
I do now and then have a double digit score and so I have a Checkbox1 which allows me to enter scores >9 if checkbox1 =false.
I can use the code below to check if the score is less or greater than 10 but I will have to enter it into 18 textboxes and change the name of the textbox details from IF Textbox1.value <... to IF Textbox 2.value < etc. I will also have to change the text according to the name of the next tectbox to allow me to set the focus.
Can anyone please advise how I can check if the 'current' textbox (which has the focus) is less than or greater than 10 without needing to know the name of the textbox?
Also, can I obtain the name of Textbox1 so that I can set the focus to Textbox2 ie Textbox1+1?
As stated I can use my existing code but I am sure there must be a more elegent way of doing this and I am trying to learn a little about VBA.
Private Sub TextBox1_Change()
If TextBox1.Value < 10 And CheckBox1 = True Then
UserForm1.TextBox2.SetFocus
End If
If TextBox1.Value >= 10 And CheckBox1 = False Then
UserForm1.TextBox2.SetFocus
End If
End Sub
View 9 Replies
View Related
Mar 30, 2007
Attached are two files. I want to make the "ORIGINAL" file look like the "DESIRED_OUTPUT" file using VBA.
View 3 Replies
View Related
Aug 10, 2007
I am thinking of using a listbox so a user can select a product to graph. What I want to know, in VBA, is how do I use the selection the user makes and use it in a pivot table current page field? The listbox returns a number whereas I want the text. I can use the number when it is linked to a cell and a vlookup to get the text but how do I get the text into the current page field?
View 2 Replies
View Related
Jan 22, 2008
I have a Textbox on a Userform that allows users to enter text and code copies the text to a nominated cell on a sheet. My difficulty is that when the text is copied to the cell at the end of each line of text there is a small 'open square' symbol that I would prefer not to show. I can manually delete the symbol but would like it either not to appear of be able to automatically delete it. If I copy the text to a word file the symbols do not appear.
Private Sub CommandButton1_Click()
Sheets("Marketing").Range("b4") = UserForm1.TextBox1
Me.Hide
End Sub
View 5 Replies
View Related
Mar 16, 2007
On cell K7, i have this formula:
=IF(ISERROR(I7-J7),"",I7-J7)
On cell L7 i have this formula:
=IF(ISERROR(RANK(K7,$K$7:$K$29,0)),"",(RANK(K7,$K$7:$K$29,0)))
The issue is that in cell K7 a dash (-) shows up and ranks this as the number one, even when i have no data in I7 and J7.
MTD Conv
Conv Goal
B/W Goal
RK
-
1
29.3
31
(1.70)
12
21.8
25.0
(3.20)
15
View 9 Replies
View Related
May 13, 2014
I have a listbox on userform1 with multiselect and i am trying to populate the selection into textbox1 on userform2.
View 6 Replies
View Related
Nov 14, 2011
I want to add the selected value from listbox to textbox.
View 6 Replies
View Related
May 10, 2012
I have a listbox set as multiselect that looks at a worksheet that contains in excess of 11,000 items. I would like a way to filter down this list by the entry a user types either via a textbox or some other way.
View 9 Replies
View Related
Sep 23, 2008
I am trying to write a code that will allow me to search a multiselect listbox. The listbox has 4 column. The first column is Manager's names. I want to search this column by typing the name in a textbox. The code I have will find the name, but the first record that matches appear at the bottom of the listbox. This is the code i copied from another website:
Private Sub TextBox1_Change()
'the change event runs each time the user
'types into a text box
Dim s As String
Dim i As Integer
s = TextBox1.Text
'Note the use of the ListIndex property of the ListBox
'If the ListIndex is -1 means nothing selected
'If 0 means the first item selected
ListBox1.ListIndex = -1
If TextBox1.Text = "" Then 'nothing typed
Exit Sub
End If
For i = 0 To ListBox1.ListCount - 1
'use the LIKE operator to compare
'convert both to Uppercase as well so case does not matter
If UCase(ListBox1.List(i)) Like UCase(s & "*") Then
ListBox1.ListIndex = i
Exit Sub
End If
Next
End Sub
Also I want to be able to copy the selected items in the fourth column to another worksheet.
View 9 Replies
View Related
