I have a button on an excel sheet call 'Delete Row' where I want to put code underneath so that a user can delete an enirerow.
I have the
Selection.EntireRow.Delete Shift:=xlUp
at the moment but I want to check that the user has selected the entirerow before I delete it.
How do ask if a entire row has been selected in vba, e.g. from column 'a' to 'iv' with no specific row number.
View 5 Replies View RelatedI have the following code which will determine if a user has selected a entire column.
If Selection.Rows.Count = 65536 Then
MsgBox "User has selected an entire column."
End If
Although it worked, but is there a better way to do it? I was thinking if future version of Excel goes beyond 65536 rows, then this code is definitely unusable!!
how to enable a button only when a full row has been selected
I have a macro that will go through a set of numbers and check them against a condition. if the cell complies with the condition i want to copy the entire row to a new sheet. sofar I have tried the following to select the current row but to no avail.
View 4 Replies View RelatedMy workbook is set up such that column B has dates (starting in B11 and going to B1200). C11:Z1200 has data that correspondes to the date in Column B. There are a lot of dates that don't have data. For example, row 15, there is a date in B15 but no other information for the remainder of row 15.
I'm trying to write a macro that will delete entire rows for the dates in which there is no data. So, I'm presuming that it would search C15:Z15, if there is not information in these cells, then delete row 15.
Row 16 becomes 15 when you delete 15.. I don't know how to get around this.
I am looking to run two separate macros. I have a project plan and I am looking to be able to select a button whereby on-click, a new row is created within a selected cell. However if the cell clicked is outside of a pre-determined range, then the task is automatically entered at the bottom of the plan. I would like for the copied row to go ABOVE the selected cell and have all of the same formatting as the row below (not the top - as is default in Excel).
The second is going to be very similar but will copy a task category (like a header item) and the first task (row) found below. It will also be copied from below and be inserted above the selected cell.Both macros will clear certain cells, whilst maintaining the contents of others, with formula contained. I.E. Columns C,D,E,H,I,J will be cleared.
I insert a button in spreadsheet, when I click this button a userform appears with place to input value. I would like to check the entire column (maybe < 100 rows), if there is number exceed the input, then disply that ROW in another sheet.
View 1 Replies View RelatedI have a macro right now which makes a selection and then checks that selection to make sure it has less than 5,000 rows. If it has more, then a message box appears and we end the macro. However, in order for this macro to work properly for me, I need to change the if statement so that instead of checking for the amount of rows selected, I only need it to check if ROW 2 is selected. Is this possible? If not, can we have an IF statement to check the contents of ROW 2 (Row 2 is my header on the worksheet and will never change)?
Here is the code I currently have: [Code] ......
I have a spreadsheet that I use for people to make requests.
They can only select from the dropdown menus or the check boxes in the spreadsheet. Some fields are required.
I have a button that they click on to save the workbook.
When they click on it a macro checks if all required fields are completed. If they aren't, The user receives a Message box asking them to complete all required fields.
The problem I'm having is with 5 checkboxes each linked to a cell (B11:B15).
The user can check any or all of the boxes but they need to select at least one.
how I can check if the user selected at least one and if not then I would display a Message box asking them to select at least one?
Here is my code ...
I have the following code in a macro of mine which checks each cell has something entered and if not gives the message box.
View 5 Replies View RelatedI'm using the following code to delete select rows one at a time. I need the last row in the range to remain therefore I prevented the user from deleting the row one up from the row that contains "Total Hours" (which is always in Column B). The code works great as long at the user clicks into a cell in column B. If the user clicks into a cell in column A, C, D, E, F, G, H, or I then the code allows the user to delete the last row.
I believe I need to search entire rows to determine if the row contains "Total Hours" .
[Code] .......
Attached File : Staffing Report 1.44.xlsm‎
I am trying to create a spreadsheet which will open with sheet1 showing 'Terms and conditions' with 2 check box's. Once the check box's are checked I then want subsequence sheets to unhide. E.g check box 1 ticked - will unhide sheet 2 - (containing the report) check box 2 ticked - will unhide sheet 3 - (containing the data)
Basically, by the use of check box's I am trying to get the user to read and agree to terms/disclaimer of the use of data. Therefore can the workbook also always open with the one sheet 'terms and conditions' showing only.
The problem is when I highlight a row with some color the original color of the row is gone, so I tried this code, and again, it's removing the original format and color for the row This is the code from McGimpsey & Associates : Excel : Highlight row with background colors
Code:
PrivateSub Worksheet_SelectionChange(ByVal Target As Excel.Range)
Const cnNUMCOLS AsLong=256
Const cnHIGHLIGHTCOLOR AsLong=36'default lt. yellow
Static rOld As Range
Static nColorIndices(1To cnNUMCOLS)AsLong
Dim i AsLong
IfNot rOld IsNothingThen'Restore color indices
[code].....
How can I retain the range's historical color so that when I deselect the row it reverts properly?
I want to catch an error and reset the entire code to the very beginning and skip that entire entry. When I use "Next fieldSheetName" I get "Next without For," error 1004. Searches tell me I have an open block somewhere, but that's not true. Removing that statement (and having the loop iterate as normal) has no error at all.
Dim employeeName As String
Dim fieldMax, x, y As Byte ' Counters mostly
Dim workedHours, fieldSheetName As Integer
fieldMax = 204 ' Row number to stop on in the field time sheet
row = 4 ' Row specification for field time sheet. Begin at row 4 to ignore headers
' and start on the first name. This should not be changed!
Col = 3 ' Start at column 3 then increase by one to start going to next time entry
' RESET HERE!
For fieldSheetName = 4 To fieldMax Step 8 ' This is our MAIN loop. It iterates from 0 to fieldMax, which is 204...........
I'm trying to autofill a series of rows (that are blank) with data from an above row. I want to autofill the row in its entirety, not just filling in blank cells.
For instance (assuming comma is a new column). Colors listed are just a data example. Space between commas indicates a blank cell:
142, RED, GREEN, , YELLOW, , BLACK, PURPLE
(blank row)
142, GREEN, RED, ,BLACK, , PINK, ,
(blank row)
(blank row)
(blank row)
154, YELLOW, BLACK, , GRAY, , PURPLE, RED
(blank row)
(blank row)
So rather than it just completing the task in one desired cell, it would complete the task over the entire spreadsheet. Data spread can be as far as row 500 and column BY, so you can see how a copy + paste or a drag would get monotonous.
Another small example data set:
1,1,1453,0,10,-35
(blank row)
(blank row)
0,0,1448,0, ,-35
(blank row)
1, ,1443,1,3,-36
1,2,1408,2,7, ,
(blank row)
(blank row)
(blank row)
1,2, ,2,7,-39
(blank row)
(blank row)
1,3,1344,1,10,31
And column A will always have data (unless the row is completely blank.
I am using this code to hide or unhide rows of text on another sheet:
VB:
Sub ProcessSheet1ChangeOnCellJ7(ByVal Target As Range)
Dim sAddress As String
Dim sValue As String
'Get the address of the cell that changed without '$' signs
sAddress = Target.Address(False, False)
[Code]....
When the "Not Pursuing" list box option is selected (in cell "J7" or "J8" in Sheet 1) I need to add (or over-write) "Not Pursuing" to the range of cells in column "B" (in the "Tasks" sheet), but only for that particular Goal, meaning a limited range of cells in column "B". If the "Pursuing - Show All Tasks" option is selected for a Goal then these same cells need to be blank so that the appropriate person can enter their name into the cell.
The purpose for adding "Not Pursuing" automatically to these yellow highlighted cells is that it will facilitate filtering of tasks by individual in the "Tasks" sheet..
Again I have tried several times to upload a sample file and am unable to, which I know makes it more difficult to solve. (Is there some common mistake people make? I know it's an allowed format and is very small in file size....)
Code solution can be entered directly beneath:
VB:
If Target.Value = "Not Pursuing" Then
ActiveWorkbook.Sheets("Tasks").Rows("29:29").EntireRow.Hidden = False
ActiveWorkbook.Sheets("Tasks").Rows("30:48").EntireRow.Hidden = True
Basically it is a if statement saying that if the selected cell falls between 1/01/06 and 31/01/06 then Jan would be selected. The end part is not a problem; I’m just not sure how to write the one line of code that would test if the cell falls between the two dates. I attemped to create it as shown in the code attached below but wasn't successful. I used an else if statement to test the other 11 months.
Sub test()
Dim SelectDate As Range
Set SelectDate = Range("SelectedDate")
If selectedDate >= 1 / 1 / 2006 And selectedDate <= 31 / 1 / 2006 Then
ActiveSheet. PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _
"Jan"
ElseIf selectedDate >= 1 / 2 / 2006 And selectedDate <= 28 / 2 / 2006 Then
ActiveSheet.PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _
"Feb"........................
My company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####"
12 digit should be "###### ######"
13 digit should be "# ###### ######"
14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
I am using this code
View 5 Replies View RelatedI want to have 1 check box affect 3 others in the following way: check box 1 if checked, allow check/uncheck of check boxes 2, 3, 4 if unchecked, uncheck boxes 2, 3, 4 and do not allow checking check box 1 is linked to D1 which starts with a value of false. cell E1 is if condition to have value 1 when D1 has value of true.
I have attempted to attach an example worksheet.
Test check control.xlsx
I am creating a userform with 10 checkboxes. The first 9 checkboxes are user options. I want the 10th check box to be a "Select All" option i.e. if the 10th checkbox is checked all the other 9 options are deemed to have been selected.
The way I want the display to work is that if the 10th checkbox is ticked all other checkboxes are cleared. Also if the 10th checkbox is ticked and any of the other check boxes is selected then the 10th checkbox should be selected.
I have tried coding this up but the checkboxes don't seem to operate as desired. I placed some code on the click event for the last option button to set the vlaue for all other buttons to false. This works but the 10th check box doesn't get ticked itself. When I try to code up the other bit I get similar issues.
The following code inserts a row below the selected row, and copies the formula of the row above into it.
Dim Rw As Integer
Rw = ActiveCell.Row
Selection.Insert Shift:=xlDown
Rows("" & Rw - 1 & ":" & Rw - 1 & "").Copy
Rows("" & Rw & ":" & Rw & "").Paste
However, I need to alter this to work for inserting more than one row at a time. ie. the user selects 'x' number of rows and 'x' rows are inserted below (in the same way 'Insert Row' works in Excel) and the row above the selection is copied down.
When I press a command button I want to:
Uncheck a checkbox made with Control Toolbox
Check a particular Option Button within a group box made with the Forms Toolbar.
EDIT: Clarification, I want both things to happen when I click one button.
Is there a way to concatenate part of a formula into an entire row?
If I have a formula such as =(8.15*$D$1)*1.35 whereas each line in the row has a different value in the brackets. I need to add + 0.60 in the brackets. But don't want to do it manually for 1200 lines.
This problem has been driving me insane, as I thought it wasn't possible to do in excel however this morning I accidentally pressed a shortcut key on my keyboard and what I wanted, happened.. pity I can't remember how I did it.
How do I highlight an entire row, but remains highlighted when i enter info in the cells until i move down to the next cell? Eg. I click on row"1" so that all cells are highlighted, then while entering info in B:1 - the entire row is still highlighted? This will be very useful in my line of work.
I know there was some information on conditioning formatting, but surely there is a way to do it via keyboard shortcut since i accidentally did it just before.
I have used the Selection x1Down code to select all rows to the next one with data in but now need some code to deselect the final row (I want to delete all of the blank rows above)
View 2 Replies View RelatedI have a spreadsheet with thounsands of rows. Some of the rows I'd like to delete because thier values are below 5%. I wrote a VBA code, which primary function is to look for a cell and delete the row if the value is less than or equal to 5%. The code looks fine but I get an "Infinite Loop" anytime the first row value is not true. Below is the code,
-jungleman1
Sub Delete_Zero_Factors()
Dim i As Integer
Dim CUSIP As String
Sheets("Report").Select
Range("B5").Select
i = 0
While Not (IsEmpty(ActiveCell.Offset(i, 0).Value))
CUSIP = ActiveCell.Offset(i, 0).Value
Do While (ActiveCell.Offset(i, 1).Value
Looking for a formula to establish whether a whole row is empty or not
I try this:
=LOOKUP(2;1/(4:4"");4:4)=NA()
(XL 2007)
But, this works, except when one cell contains NA()
how to make a general expression?