IF (entire Row Selected) ???
Oct 16, 2008How do ask if a entire row has been selected in vba, e.g. from column 'a' to 'iv' with no specific row number.
View 5 Replies
ADVERTISEMENT
Check Whether Entire Row Has Been Selected
Nov 14, 2008I have a button on an excel sheet call 'Delete Row' where I want to put code underneath so that a user can delete an enirerow.
I have the
Selection.EntireRow.Delete Shift:=xlUp
at the moment but I want to check that the user has selected the entirerow before I delete it.
Determine If Entire Column Is Selected
Oct 7, 2006I have the following code which will determine if a user has selected a entire column.
If Selection.Rows.Count = 65536 Then
MsgBox "User has selected an entire column."
End If
Although it worked, but is there a better way to do it? I was thinking if future version of Excel goes beyond 65536 rows, then this code is definitely unusable!!
Enable Button If Entire Row Selected
Nov 30, 2006how to enable a button only when a full row has been selected
Macro To Copy Entire Row From A Selected Cell
Nov 10, 2008I have a macro that will go through a set of numbers and check them against a condition. if the cell complies with the condition i want to copy the entire row to a new sheet. sofar I have tried the following to select the current row but to no avail.
View 4 Replies View RelatedVBA Macro - Copying Entire Row From Selected Cell (within Pre-defined Range)
Jun 21, 2014I am looking to run two separate macros. I have a project plan and I am looking to be able to select a button whereby on-click, a new row is created within a selected cell. However if the cell clicked is outside of a pre-determined range, then the task is automatically entered at the bottom of the plan. I would like for the copied row to go ABOVE the selected cell and have all of the same formatting as the row below (not the top - as is default in Excel).
The second is going to be very similar but will copy a task category (like a header item) and the first task (row) found below. It will also be copied from below and be inserted above the selected cell.Both macros will clear certain cells, whilst maintaining the contents of others, with formula contained. I.E. Columns C,D,E,H,I,J will be cleared.
Find Total Hours By Searching Entire Rows Below Selected Cell Versus Cells In A Column
May 19, 2014I'm using the following code to delete select rows one at a time. I need the last row in the range to remain therefore I prevented the user from deleting the row one up from the row that contains "Total Hours" (which is always in Column B). The code works great as long at the user clicks into a cell in column B. If the user clicks into a cell in column A, C, D, E, F, G, H, or I then the code allows the user to delete the last row.
I believe I need to search entire rows to determine if the row contains "Total Hours" .
[Code] .......
Attached File : Staffing Report 1.44.xlsm‎
Highlight Entire Row When Cell Selected Without Losing Original Formats And Color Of Original Row
Sep 5, 2012The problem is when I highlight a row with some color the original color of the row is gone, so I tried this code, and again, it's removing the original format and color for the row This is the code from McGimpsey & Associates : Excel : Highlight row with background colors
Code:
PrivateSub Worksheet_SelectionChange(ByVal Target As Excel.Range)
Const cnNUMCOLS AsLong=256
Const cnHIGHLIGHTCOLOR AsLong=36'default lt. yellow
Static rOld As Range
Static nColorIndices(1To cnNUMCOLS)AsLong
Dim i AsLong
IfNot rOld IsNothingThen'Restore color indices
[code].....
How can I retain the range's historical color so that when I deselect the row it reverts properly?
Catch An Error And Reset The Entire Code To The Very Beginning And Skip That Entire Entry
Jun 5, 2008I want to catch an error and reset the entire code to the very beginning and skip that entire entry. When I use "Next fieldSheetName" I get "Next without For," error 1004. Searches tell me I have an open block somewhere, but that's not true. Removing that statement (and having the loop iterate as normal) has no error at all.
Dim employeeName As String
Dim fieldMax, x, y As Byte ' Counters mostly
Dim workedHours, fieldSheetName As Integer
fieldMax = 204 ' Row number to stop on in the field time sheet
row = 4 ' Row specification for field time sheet. Begin at row 4 to ignore headers
' and start on the first name. This should not be changed!
Col = 3 ' Start at column 3 then increase by one to start going to next time entry
' RESET HERE!
For fieldSheetName = 4 To fieldMax Step 8 ' This is our MAIN loop. It iterates from 0 to fieldMax, which is 204...........
Autofill Entire Row With Data From Above Over Entire Spreadsheet
Jul 28, 2014I'm trying to autofill a series of rows (that are blank) with data from an above row. I want to autofill the row in its entirety, not just filling in blank cells.
For instance (assuming comma is a new column). Colors listed are just a data example. Space between commas indicates a blank cell:
142, RED, GREEN, , YELLOW, , BLACK, PURPLE
(blank row)
142, GREEN, RED, ,BLACK, , PINK, ,
(blank row)
(blank row)
(blank row)
154, YELLOW, BLACK, , GRAY, , PURPLE, RED
(blank row)
(blank row)
So rather than it just completing the task in one desired cell, it would complete the task over the entire spreadsheet. Data spread can be as far as row 500 and column BY, so you can see how a copy + paste or a drag would get monotonous.
Another small example data set:
1,1,1453,0,10,-35
(blank row)
(blank row)
0,0,1448,0, ,-35
(blank row)
1, ,1443,1,3,-36
1,2,1408,2,7, ,
(blank row)
(blank row)
(blank row)
1,2, ,2,7,-39
(blank row)
(blank row)
1,3,1344,1,10,31
And column A will always have data (unless the row is completely blank.
Fill Range Of Cells With Text When Listbox Option Selected - Clear When Not Selected
Jul 25, 2014I am using this code to hide or unhide rows of text on another sheet:
VB:
Sub ProcessSheet1ChangeOnCellJ7(ByVal Target As Range)
Dim sAddress As String
Dim sValue As String
'Get the address of the cell that changed without '$' signs
sAddress = Target.Address(False, False)
[Code]....
When the "Not Pursuing" list box option is selected (in cell "J7" or "J8" in Sheet 1) I need to add (or over-write) "Not Pursuing" to the range of cells in column "B" (in the "Tasks" sheet), but only for that particular Goal, meaning a limited range of cells in column "B". If the "Pursuing - Show All Tasks" option is selected for a Goal then these same cells need to be blank so that the appropriate person can enter their name into the cell.
The purpose for adding "Not Pursuing" automatically to these yellow highlighted cells is that it will facilitate filtering of tasks by individual in the "Tasks" sheet..
Again I have tried several times to upload a sample file and am unable to, which I know makes it more difficult to solve. (Is there some common mistake people make? I know it's an allowed format and is very small in file size....)
Code solution can be entered directly beneath:
VB:
If Target.Value = "Not Pursuing" Then
ActiveWorkbook.Sheets("Tasks").Rows("29:29").EntireRow.Hidden = False
ActiveWorkbook.Sheets("Tasks").Rows("30:48").EntireRow.Hidden = True
Elseif Statement In Vba: If The Selected Cell Falls Between 1/01/06 And 31/01/06 Then Jan Would Be Selected
Oct 10, 2006Basically it is a if statement saying that if the selected cell falls between 1/01/06 and 31/01/06 then Jan would be selected. The end part is not a problem; I’m just not sure how to write the one line of code that would test if the cell falls between the two dates. I attemped to create it as shown in the code attached below but wasn't successful. I used an else if statement to test the other 11 months.
Sub test()
Dim SelectDate As Range
Set SelectDate = Range("SelectedDate")
If selectedDate >= 1 / 1 / 2006 And selectedDate <= 31 / 1 / 2006 Then
ActiveSheet. PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _
"Jan"
ElseIf selectedDate >= 1 / 2 / 2006 And selectedDate <= 28 / 2 / 2006 Then
ActiveSheet.PivotTables("PivotTable1").PivotFields("PnLDate").CurrentPage = _
"Feb"........................
Copy Selected Rows & Insert As Many Times As Rows Selected
Feb 6, 2008The following code inserts a row below the selected row, and copies the formula of the row above into it.
Dim Rw As Integer
Rw = ActiveCell.Row
Selection.Insert Shift:=xlDown
Rows("" & Rw - 1 & ":" & Rw - 1 & "").Copy
Rows("" & Rw & ":" & Rw & "").Paste
However, I need to alter this to work for inserting more than one row at a time. ie. the user selects 'x' number of rows and 'x' rows are inserted below (in the same way 'Insert Row' works in Excel) and the row above the selection is copied down.
Add A Value In Entire Row
May 7, 2014Is there a way to concatenate part of a formula into an entire row?
If I have a formula such as =(8.15*$D$1)*1.35 whereas each line in the row has a different value in the brackets. I need to add + 0.60 in the brackets. But don't want to do it manually for 1200 lines.
Highlighting Entire Row
May 17, 2009This problem has been driving me insane, as I thought it wasn't possible to do in excel however this morning I accidentally pressed a shortcut key on my keyboard and what I wanted, happened.. pity I can't remember how I did it.
How do I highlight an entire row, but remains highlighted when i enter info in the cells until i move down to the next cell? Eg. I click on row"1" so that all cells are highlighted, then while entering info in B:1 - the entire row is still highlighted? This will be very useful in my line of work.
I know there was some information on conditioning formatting, but surely there is a way to do it via keyboard shortcut since i accidentally did it just before.
Offset Entire Row
Oct 9, 2008I have used the Selection x1Down code to select all rows to the next one with data in but now need some code to deselect the final row (I want to delete all of the blank rows above)
View 2 Replies View RelatedDeleting The Entire Row In VBA
Dec 24, 2007I have a spreadsheet with thounsands of rows. Some of the rows I'd like to delete because thier values are below 5%. I wrote a VBA code, which primary function is to look for a cell and delete the row if the value is less than or equal to 5%. The code looks fine but I get an "Infinite Loop" anytime the first row value is not true. Below is the code,
-jungleman1
Sub Delete_Zero_Factors()
Dim i As Integer
Dim CUSIP As String
Sheets("Report").Select
Range("B5").Select
i = 0
While Not (IsEmpty(ActiveCell.Offset(i, 0).Value))
CUSIP = ActiveCell.Offset(i, 0).Value
Do While (ActiveCell.Offset(i, 1).Value
Entire Row Empty
Jan 14, 2008Looking for a formula to establish whether a whole row is empty or not
I try this:
=LOOKUP(2;1/(4:4"");4:4)=NA()
(XL 2007)
But, this works, except when one cell contains NA()
how to make a general expression?
Delete Entire Row If
Oct 28, 2008How would i search the entier worksheet im in, looking at column b only, and delete the entire row if i find the word Date in it.
View 9 Replies View RelatedCopy Entire Row
Jan 19, 2009Here is the code that I have so far and it works almost the way I want it to. I need to copy over more than just that cell that is being coppied over I need to copy over certain columns in that row.
Private Sub ListBox1_Click()
Dim wksData As Worksheet, wksPayment As Worksheet
'payment sheet
Set wksPayment = Sheet11
Set wksData = Sheet26
Dim LR As Long
LR = wksData.Cells(Rows.count, "A").End(xlUp).Row
Dim varField As Variant
varField = wksPayment.OLEObjects("Listbox1").Object.Value
Range("F6").Value = varField
Copy Entire Row From One Ws To Another
May 3, 2006I have looked through the forum at several different copy and Vlookup examples, but I can’t seem to get them to work. I need to compare worksheet(1) (“Portfollio”) in column “B” against Worksheet(2) (“PJS Cap”) column “B” to find any items that the worksheet(2) has that Worksheet(1) does not. Then for these items copy the entire row to the end of worksheet(1). My code gives a runtime error on the copy line
Sub PJSUpdate()
Dim Found As Boolean
Dim I As Integer
Dim J As Integer
Dim LastRowE As Long
Dim LastRowP As Long
Dim InsterRow As Long
LastRowE = Worksheets("PJS Cap"). Range("b65536").End(xlUp).Row
LastRowP = Worksheets("Portfollio").Range("b65536").End(xlUp).Row
InsertRow = LastRowP
For J = 2 To LastRowE ' loops through the portfollio worksheet project list
Found = False 'flag intitated to not found........................
Delete Entire Row
Sep 24, 2006when i delete the entirerow, it shifts the rows up (which is what I want) but it skips that row when it does.
so if I have 2 blank cells together it will delete the 1st and leave the 2nd blank.
Sub ()
Dim myrange As Range
Set myrange = ("a:a")
For Each c In myrange
If c.Value = "" Or c.Value <= 5 Then
c.EntireRow.Delete
End If
Next
End Sub
Vba Autofill Entire Row
Feb 12, 2007I have recorded a Macro to AutoFill a row in my Excel spreadsheet. The VBA code is very simple and looks like this:
Selection.AutoFill Destination:= Range("D8460:T8460"), Type:=xlFillDefault
Range("D8460:T8460").Select
I thought I would simply be able to click on another row and re-use the Macro, but this doesn't seem to work, as I get the following error message: AutoFill method of Range class failed.
What do I need to change in my code, so that it will work in any row I choose?
If Yes Then Display Entire Row In Another Worksheet
Feb 23, 2014Basically every month I keep a track of my sales in a spreadsheet.
I've attached a sample file : Discrepancy Form.xlsx‎
Sometimes I don't get paid correctly. So rather then filling everything in manually, I want to simply put a "Y" (for yes, there's a discrepancy) or "N" (for no, there's no discrepancy" next to worksheet "Sales" but then have it display the values in worksheet "Discrepancy."
Alphabetizing Entire Spreadsheet
Sep 2, 2009I'm trying to sort a spreadsheet that has 6 columns with 36 rows total. I want to alphabetize the entire spreadsheet, from A1 to F36 so that A1 is the first of the alphabet and F36 is the last. When I select all the data on the spreadsheet and click sort by ascending, it sorts the columns within themselves instead of within each other.
View 5 Replies View RelatedKeep Entire Rows Of Spreadsheet Together
Jan 4, 2013I've got spreadsheet I use to control the inventory of my user equipment; who has it, what is it, where is it, etc.
I'd like to "lock" multiple consecutive cells of each row so that they never seperate. This is because they need to be together. However, periodically, I need to move, sort, or rearrange the sheet.
Is there a way I can "idiot proof" this so that these cells never come unlocked from each other?
There is no vba involved (primarily because I don't know how), and no other scripting either.
Tie IF Statement To Entire Column
Jul 17, 2013The subject summarizes what I want to achieve. I just want to tie an if statement to an entire column, so it will disappear if a statement is satisfied.
View 4 Replies View RelatedMacro That Will Shade Entire Row Red
Jun 4, 2014I have a spreadsheet with columns a-v. Column F (titled aging) displays how many days old an issue is. I would like to have a macro that will automatically shade a row light red if the number is less than 90. I don't want the entire row shaded, just the contents of column a-v.
View 2 Replies View RelatedVBA To Find Value Create Entire Row?
Jul 15, 2014I need a macro that will search a value in column D (sheet2) that is noted in cell C7 on sheet3. After that it must copy enitre entire row where searched value was found to sheet3, last empty row.
an example:
entered value in cell C7 on sheet 3 is ABC
on Sheet2 column D, value ABC was found in cell 150 (D150) so it has to copy for 150 to sheet3, last empy row.
Apply The Code For Entire Row 4?
Aug 2, 2014I have amended the code but it's for columns. I want this formatting for entire row 4 only and not for columns. Because it's disturbing my program if there is any data using ':' sign then the same formatting is applied which I don't want.
[Code] .....
The ':' sign is not changing to bold. I want to bold ':' sign too.
How to amend the code for entire row 4?