I am trying to establish if Outlook 2000 is currently running in VBA , I have tried the following code but this only works when the user is actually positioned in "Inbox - Microsoft Outlook" etc. At this point I don't really care where/what the user has open in Outlook but merely to check if outlook is running.
I have tried below but does not work robustly enough.
I have also tried AppActivate("Microsoft Outlook")
I have also tried IsRunning("Outlook.Application") which does not even compile.
Dim OutlookErr, OutlookBox
On Error GoTo OutlookIsNotRunning
AppActivate ("outlook")
GoTo now_send_email
OutlookIsNotRunning:
OutlookErr = "Outlook is either not open or busy with another task." & vbCrLf & vbCrLf
OutlookErr = OutlookErr & "Please Open Outlook, Close any draft emails," & vbCrLf & vbCrLf
OutlookErr = OutlookErr & "the Global Address List or other activities and try again."
OutlookBox = MsgBox(OutlookErr, vbCritical, "Unable to access Outlook to send email")
Exit Sub
I need to check cell G5 (which is G4-G3) before running a macro. if G5 is zero i need to pop up a message to inform the user to enter data in cells G3 & G4. And if G5 is greater than Zero the macro shud run.
I have some code here that I am using to find matches in Column D and then remove colored cell once the match is found. I am in putting the data line by line from a Barcode scanner and only want to run the macro if the date in Column A is today. Here is the code I am using.
I have a spreadsheet with a macro that saves a backup s/s to a particular folder, but the problem I have need the macro to check the filepath is that of the original s/s before running.
Its so that when people take copies of the main s/s and save them to their desktop I dont want the copies being saved in the backup folder
macro is below
Private Sub Workbook_BeforeClose(Cancel As Boolean)
If ActiveWorkbook.ReadOnly Then Exit Sub
If MsgBox("Do You Want To Save A Backup?", vbYesNo) = vbNo Then Exit Sub
Dim fso As Object Dim objFiles As Object Dim myWkBk As String Dim myFName As String Dim BkUpDir As String Dim CountFiles As Integer Dim mydate As Double
I have a macro that is intdended to run after the user has selected a cell in column A:A (any position except A1)
Once the user has selected their desired cell, they press a button and the macro runs.
Occasionally a user will press the button without selecting a cell in the proper column.
I would like a message box to pop up to tell the user "Please select an account in Column A" and bump the cursor (active cell) to A2 so at least it's in the right column to help get them started.
I have a macro to send emails to a group people that based on various criteria, it will attach a number of files to a recipient's particular email. This is a small portion of the code that does the attachment adding:
Code: If Range("B" & a) = "Y" Then If citChev "" Then .Attachments.Add citChev End If If Range("C" & a) = "Y" Then If citMits "" Then .Attachments.Add citMits End If If Range("D" & a) = "Y" Then If citToyo "" Then .Attachments.Add citToyo End If If Range("E" & a) = "Y" Then
[code].....
Most people get several of the files attached to their email and all works fine. But, there are certain conditions when all the IF() stmts fail where a recipient will not get any files attached. I do not want to send the email if this is the case, but it currently is sending it.
Is there a way after all the IF() stmts have processed to check to see if this current email has any attachments assigned to it? (IF .Attachments "" Then...) does not work.
My company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####" 12 digit should be "###### ######" 13 digit should be "# ###### ######" 14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code: Sub Tester()
Dim WB As Workbook Dim WS As Worksheets Dim modCounter As Long Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm") Set WS = WB.Sheets(BM18)
I want to have 1 check box affect 3 others in the following way: check box 1 if checked, allow check/uncheck of check boxes 2, 3, 4 if unchecked, uncheck boxes 2, 3, 4 and do not allow checking check box 1 is linked to D1 which starts with a value of false. cell E1 is if condition to have value 1 when D1 has value of true.
I am creating a userform with 10 checkboxes. The first 9 checkboxes are user options. I want the 10th check box to be a "Select All" option i.e. if the 10th checkbox is checked all the other 9 options are deemed to have been selected.
The way I want the display to work is that if the 10th checkbox is ticked all other checkboxes are cleared. Also if the 10th checkbox is ticked and any of the other check boxes is selected then the 10th checkbox should be selected.
I have tried coding this up but the checkboxes don't seem to operate as desired. I placed some code on the click event for the last option button to set the vlaue for all other buttons to false. This works but the 10th check box doesn't get ticked itself. When I try to code up the other bit I get similar issues.
I have searched and think I have found what I need to create Outlook tasks from my Excel spreadsheet. I'm hoping that someone here can help me pull it together into something that will be usable in my project tracking spreadhsheet...
I try to keep track of milestones... these milestones are listed in column B of my spreadsheet and are in rows 10 through about 105
For each of my customers I then keep 4 columns D, E, F, G - H, I, J, K - L,M,N,O - etc. Each group of 4 is a different customer....
The customer's first column (D, H, L, etc.) is a Due date of the Milestone that is found in column B. The second column is a check box that I use to indicate when the milestone is complete The 3rd column is the completion date The last colum is just a filler space that helps to separate each customer.
What I would like to do is insert a button at the bottom of EACH grouping of 4 that when pressed would look at the first column for the customer group and for ANY Milestone that has a DUE date process the stuff in the VB below to create an OUTLOOK task for each item that has a DUE date. (It would be conceivable that as it stepped through each row for a customer group of columns that I could have it create 90+ Tasks in Outlook.
A couple of additional things... in row 110 for the first column of the customer I have a DATE or a blank. So for example in D110 it might be blank or a date like 10/29/2007. If it is blank then when I press the button it would loop through ADD the tasks for each row with a due date. If row 110 has a DATE I would get a popup indicating that the tasks are already in OUTLOOK and that they were added on whatever the date is in row 110... This is kind of the safeguard that I don't get the same group of tasks multiple times by pressing the button by mistake.
In Excel, I want VBA to refer to the SENT ITEMS folder in Outlook. I want to loop over all sent items, and if the email address satisfies a condition, then record that fact in Excel. I am good at VBA in Excel, and I have a passing knowledge of VBA in Outlook, but I don't know how to refer to Outlook within my Excel VBA.
Below I have my code that works great. What I would like to do is make it pull the .HTMLBody from a cell value instead of inbeded in the code so users can change, just like to I have it below for who I am sending it to. The issue is if I do it the same way I loose my signature and the font, size and color I have below. How can I do this.
range("P16") would be the 1st line of the mesage range("P17") would be the 2nd line of the mesage range("P18") would be the 3rd line of the mesage
All the sendkeys below copy a range and paste it below my message as a picture currently. That is fine.
I'm in search of a VBA macro which will send a mail through outlook automatically with the count of files(.pdf + .msg files) in any given folder.
I work for an organization, where we use Outlook for mailing purpose.
Everyday Inventory(.pdf files and .msg files) will be saved in a folder that is to be processed.
I want a macro which should automatically send the total inventory (.pdf files + .msg files) through my outlook mailbox(say: me@outlook.com) to a my superiors outlook mailbox(say: superior@outlook.com).
If the macro sends that email to my superior before me and my superior logon to computers at perticular time (say: 7:00AM daily), need to plan our day at work.
I am having trouble figuring out how to paste an Excel Worksheet into Outlook. I am using '07 versions for both. I currently have code that when a button is selected, Outlook opens and has form text that I have entered. I just cant figure out how to get the worksheet pasted into the body of the email after this text. Here is what I have:
i am using the attached sheet to export data from excel to outlook calendar from last 2-3 months. Now suddenly it stopped working for me (I didn't amend the code)
All the data i have filled in is in the correct format but the code doesn't export the data after ROW 72.
Im searching for a way to send a .PDF of 1 worksheet via outlook. I have seached the forum, and have tried to follow Ron De Bruin's web page on how to do this but fall short. Im currently using his code to send the excel sheet.
I am probably overengineering my macro, but I would like to setup an outlook appointment in two peoples calendars from my userform. The macro has access to the email addresses of the selected persons, I just want to send date/time and subject.
I have some code to literally email a workbook to a specific user. But when the email is sending...i am getting the warning form Outlook whethere to send or not. If the user clicks No...then this opens up a can of worms when asking to debug. Is there a way i which i can amend the code to disable this warning and send regardless...without changing security settings in outlook???
I have to send out emails to all of my staff with their new login ID's and PW's and other misc information one by one to each user. Reason being is that all ID's, PW's and other information pertains to that specific user and includes sensitive information.
I know there's a VBA script I can use to send out the emails, but the script I found online keeps crashing my Outlook and requires it to go through my personal inbox which takes 15 minutes every time.
I have the pertinent information split up into different columns/cells.
A1: email A2: subject A3: body (ID, PW, verbage) A4: attachment link (if required) A5: if I could have Outlook automatically stamp each email with my signature that'd be awesome as well.
I would like to send an image that has a hyperlink in an email, so when the user receives the email they can click the image and it will take them to a webpage.
