I need to check cell G5 (which is G4-G3) before running a macro. if G5 is zero i need to pop up a message to inform the user to enter data in cells G3 & G4. And if G5 is greater than Zero the macro shud run.
I have some code here that I am using to find matches in Column D and then remove colored cell once the match is found. I am in putting the data line by line from a Barcode scanner and only want to run the macro if the date in Column A is today. Here is the code I am using.
[Code] .....
I have a spreadsheet with a macro that saves a backup s/s to a particular folder, but the problem I have need the macro to check the filepath is that of the original s/s before running.
Its so that when people take copies of the main s/s and save them to their desktop I dont want the copies being saved in the backup folder
macro is below
Private Sub Workbook_BeforeClose(Cancel As Boolean)
If ActiveWorkbook.ReadOnly Then Exit Sub
If MsgBox("Do You Want To Save A Backup?", vbYesNo) = vbNo Then Exit Sub
Dim fso As Object
Dim objFiles As Object
Dim myWkBk As String
Dim myFName As String
Dim BkUpDir As String
Dim CountFiles As Integer
Dim mydate As Double
BkUpDir = "k:singstatappealsappeals trackerBackups"
Set fso = CreateObject("Scripting.FileSystemObject")
Set objFiles = fso.GetFolder(BkUpDir).Files
On Error Resume Next
'the actual counting of files takes place here.
If Err.Number 0 Then
CountFiles = 0
Else
CountFiles = objFiles.Count
End If
If CountFiles > 4 Then
MsgBox "You have " & CountFiles & " saved workbooks. Perhaps you should delete some?"
End If
mydate = Format(Now(), "ddmmyy")
myWkBk = ActiveWorkbook.Name
myFName = ActiveWorkbook.FullName
fso.CopyFile myFName, BkUpDir & mydate & myWkBk
End Sub
I have a macro that is intdended to run after the user has selected a cell in column A:A (any position except A1)
Once the user has selected their desired cell, they press a button and the macro runs.
Occasionally a user will press the button without selecting a cell in the proper column.
I would like a message box to pop up to tell the user "Please select an account in Column A" and bump the cursor (active cell) to A2 so at least it's in the right column to help get them started.
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
I am trying to establish if Outlook 2000 is currently running in VBA , I have tried the following code but this only works when the user is actually positioned in "Inbox - Microsoft Outlook" etc. At this point I don't really care where/what the user has open in Outlook but merely to check if outlook is running.
I have tried below but does not work robustly enough.
I have also tried AppActivate("Microsoft Outlook")
I have also tried IsRunning("Outlook.Application") which does not even compile.
Dim OutlookErr, OutlookBox
On Error GoTo OutlookIsNotRunning
AppActivate ("outlook")
GoTo now_send_email
OutlookIsNotRunning:
OutlookErr = "Outlook is either not open or busy with another task." & vbCrLf & vbCrLf
OutlookErr = OutlookErr & "Please Open Outlook, Close any draft emails," & vbCrLf & vbCrLf
OutlookErr = OutlookErr & "the Global Address List or other activities and try again."
OutlookBox = MsgBox(OutlookErr, vbCritical, "Unable to access Outlook to send email")
Exit Sub
I am trying to utilise a vba script for DNS resolution which i got from Followup: DNS Lookup and Ping in Excel - CodeProject
I have a list of IP addresses that I want to use this on, however if I test this by using the test instructions, excel does nothing, its just text in a cell, so I would like to know how would this procedure get called from the spreadsheet?
Code:
GetHostname("4.2.2.1") in any Excel cell.
or
Use: GetIpAddress("www.google.com") in any Excel cell.
VBA snippet for the following:
Code:
If an instance of outlook is running then
bind to it
Else
Create new instance and bind to it
I am trying to run a macro when any cell in a range changes. I have got this to run, but only on one cell, not any of the cells in a range.
Working code:
[Code]....
Non working Code:
[Code] .........
I am at a loss as to why the range code won't work, or why the first code won't work without makig the cell reference absolute.
I am new to the whole MACRO VBA thing and I am desperately trying to learn. So this is the Situation. I recorded a macro of an If statement on a row. very simple. Some of the rows below ( Like 700) need the same formula that I recorded. I would like to highlight the cells that need the formula and run the macro on them. however the macro only runs one at a time. Is there a way that this can be avoided?
View 11 Replies View RelatedIs it possible to have a macro run as soon as there is text typed into cell A2? Basically, I have a form that needs to be filled out, but somehow, users forget to put their name in the box. So I don't want any information to be able to be typed in until a name is entered.
View 9 Replies View RelatedI have following macro run when the given cell changes:
HTML Code:
Private Sub Case_Checkout(ByVal Target As Range)
Dim KeyCells As Range
Dim WS As Worksheet
Dim LkUpVal As Range
Dim LkUpRng As Range
[Code]...
It was working...and then just stopped working. I scan a barcode into cell A1 and hit enter. Can't figure out why is stopped unhiding the tab. I haven't changed anything...
I have a macro that is run by clicking on a macro button. The macro copies the data from Sheet1 and pastes it in another sheet, Sheet2. I added some conditional formatting that colors certain cells red if others are blank on Sheet1. I would like to add some code to my macro that will not allow it to copy and paste from sheet1 to sheet2 if there are any red cells in the range.
View 9 Replies View RelatedI have been trying to find a macro that would allow me to keep a running total in a cell by adding a number to that cell and the same cell would display the sum of the numbers entered. {i.e.} If cell a1 has 0 in it and i click on that cell and put 3 in it would display 3 if i added 2 to it it would display 5 and so on. I need it to do this for about 182 cells on one page.I found this macro that runs automatically every time and works great......But only for one cell so far..."D3"...Ugh!!! I need this macro to work for the following range of cells "colums d thru j from row 3 down to 28 in each colum. Each cell is an individual. There are 182 cells total that each need this macro to work ...all on one page
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Static dAccumulator As Double
With Target
If .Address(False, False) = "D3" Then
If Not IsEmpty(.Value) And IsNumeric(.Value) Then
dAccumulator = dAccumulator + .Value
Else
dAccumulator = 0
End If
Application.EnableEvents = False
.Value = dAccumulator
Application.EnableEvents = True
End If
End With
End Sub
As you see the macro includes cell D3 only, I have made several attempts to include more cells but have failed.... I tried like this
If .Address(False, False) = "D3,E3,F3,G3,H3,I3,J3,D4,E4...and so on" Then
I have tried ....If .Address(False, False) = "D3:J3" Then
and I have tried ....If .Address(False, False) = "23Rx7C" Then
I can make it work for cell d3 but not the others. Will I have to repeat this code for every cell?
I've a workbook with 3 tabs with names "tab1, tab2, difference" and I've a macro that calculates tab1-tab2 and puts the results in tab "difference" This macro runs every time I open the workbook or every time dataset is refreshed on any tab.
everything works great but i've following issue.
let's say my cursor is in tab2 & i refresh/update dataset on tab2 which will trigger macro to update values in tab "difference".. this is good. but, soon after macro runs & updates tab "difference", cursor is no more in tab2 but in tab "difference" this is OK if I've 1 or 2 or few tabs but i've 25 tabs & the user has to go back to the initial tab everytime dataset is updated on any tab. Is there a way for the macro to recognize where the cursor initiallly was & run the macro & place the cursor back to the initial tab?
I have written some very basic code to format a report in excel. When I run the code it take a very long time to execute and I receive the following error message at the foot of the page:
Cell (press esc to cancel)
Annoyingly I have had this error before and found the solution on the web but can't remember where. If memory serves my right I deleted some temp files from a specific location on my hard drive?
I am trying to create a menu that calls macros based on your choice using a drop down combobox (from the control toolbox). Everything works except: When i try to reset the drop down to "Main Menu" using the Linked cell $B$1 excel hangs and suts down evertime. What i would like it to do is reset the drop down to "Main Menu" each time one of the other drop downs are selected. I have really enjoyed this forum and it has been a great resource for me in the past I hope someone can help. I have attaching the file for review.
View 3 Replies View RelatedBasically, what I'm dealing with is an inventory system. When a cell value reaches below a certain quantity, we have a cell light up with the word "YES" (under the "re-order" column). What I'd like to do is have a macro that checks to see if that cell is populated with "YES" and if it is, to run another macro (which I already have written) that sends out an email notifying us of the need to re-order.
How it would work: The person pulling out the inventory would fill out this form and click "Submit"
submitbutton.jpg
I would then have a "call" code tied to the "Submit" button that when clicked, would run the macro to check cell population and send out the email. The email code is already written and works flawlessly on it's own. I just cant seem to figure out how to write a macro that checks for cell value and then runs it (or not) based on that.
I want to be able to select a cell, for example A10, this would then run a macro that would copy and paste several cells of information along that row and paste it on another worksheet. However, if i then choose a15, a3, a79 in turn (using the control key), it would run the macro using those rows in turn.
i'm looking forward to hearing if and particuliar how this could be achieved.
My company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####"
12 digit should be "###### ######"
13 digit should be "# ###### ######"
14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
I need a vba code to run a macro when a specific word entered in a cell. i.e. when a word "Duplicate" entered in a cell O2, the macro run automatically.
View 1 Replies View RelatedI am trying to write a macro to check a cell value is "Y" before selecting a range and copying to a second sheet, if the cell value is not "Y" I just want an error message.
This is the code I have so far but I have an error, the macro selects the row but does not paste on the second sheet, it does clear the range of data.
Range("L16").Select
Check_Value = "Y"
If ("L16") = "N" Then
MsgBox "Sort Completed Jobs First"
Else
Range("A16:P16").Select
Selection.Copy
Sheets("R2").Select
Range("A1").Select
Myvalue = IsEmpty(ActiveCell)
Do Until Myvalue = True
Myvalue = IsEmpty(ActiveCell)
If Myvalue = False Then ActiveCell.Offset(1, 0).Select
Loop
Selection.PasteSpecial Paste:=xlAll, Operation:=xlNone, SkipBlanks:=False _
, Transpose:=False
End If
I have a requirement where i need to check whether a value is entered in cells within a collumn and if so, it would set a default value to a cell on the same row but with a different collumn. this needs to occur on the run.
there are columns that i need to check and change the status column cell in accordance.
column client_name
clumn date
column start_time
column end_time
column status
first the macro is to check whether there is a client_name, if a value exist (example, smoth, doe, allen) it would set a default value to the status column on the same row as deviation (options are served, queued, deviation).
then it would check if the date & time columns have value and is less than current date time, it would change the status cell to queued.
i know that there are several nested checks (if then if then if then) the problem is that vba is not one of the languages that i master hence im totally lost here.
i can add the finalizing features and rollout the spreadsheet.
and one more thing. i have multiple sheets with the same layout where these checks and changes need to be performed
I have a cell built into my spreadsheet that serves as an error check (i.e. returns the word 'ERROR' if certain criteria are fulfilled on the spreadsheet). I'm trying to write something into a Macro that will check this cell and not allow it to run if it states ERROR, returning a dialog box to notify this, is this possible?
View 2 Replies View RelatedThe loop is putting the correct formula into the cell - but THEN... - I wish to (within the loop and before it moves on) check if the value is equal to OR greater than 1 - if it is, make it a value of 1 (this '1' is then used at the bottom of the column of data to give a total). I need to do this before it moves onto the next cell. What am I doing wrong? Is it because once it puts formula in the cell, it then moves down - do I need to select the cell again first? As I had originally posted on this site - link: url]http://www.excelforum.com/showthread.php?t=641970[/url]
View 2 Replies View RelatedI have numerous hyperlinks in cells on a worksheet, next to these I have checkboxes. I am looking for a macro that will check if the boxes are checked and if not ignore them and if so run a certain macro.
View 6 Replies View RelatedI am trying to allow the Command Button when clicked to go through multiple conditions before making a decision. So, when someone clicks on Command Button 3 the code should look to see if CheckBox1 is true, then it should check today's date, and if it is between a range of days, or even months, then it would add the number in TextBox1 with the amount already in cell H18. This event will happen every time someone clicks on the Command Button.
The end result is to have several sheets (4 total) for each quarter in the fiscal year, and if the dates are within those parameters, the clicking of the command button will update the correct sheet.
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
Here in our department we made a pretty elaborate macro that takes a report and sorts them out to 17 different sheets in a one workbook. This Macro pulls a file from a specific location on our server and then opens the CSV sorts it out color codes all the important information and saves it back onto the server under you specific initials.
They are four PC's along with our Managers laptop that run this Macro daily.
About 3 weeks ago my Managers laptop stops running the Macro completely and hangs in the middle of the whole thing. Eventually crashing Excel.
We try to remove the modules and re-import them back into the personal macro workbork but this does not work. The Macro's did not change and still fully function on the other four desktops to this day.
I uninstall Office on my Managers laptop and reinstall. Import the Modules again and still hangs up in very same spot it did 3 weeks ago.
I've tried to lower the macro security to the lowest level also and I've still had no luck with this laptop. I don't understand. The Macro's function perfectly on other PC's but will not function on this laptop.
Can i run a macro by just the pointer going over it.
View 9 Replies View Related