Cut Move Range To New Sheet

Nov 8, 2006

I convert many large files from csv to Excel. Once I import the csv to Excel I must break the worksheet into multiple depending on when a Cell in column F is equal to a "cata" of which I do successfully with a macro.

The next step in VBA I attempt; is to go 10 cells to the right of the active cell (cata) and anchor that cell address so I may copy the range from "A1" to the anchored cell address.

I have been unable to pass the the value 10 cells to the right of the active cell. I would be grateful of any suggestions.

Here is the VBA Code I've been trying. (It bombs after it finds the cell 10 cells from the active cell.)


Sub SelectRange()
ActiveCell.Offset(0, 10).Select = EndRange
Sheets("Sheet1").Activate
Range("A1,EndRange").Select 'not working'
Selection.Cut
Sheets.Add
ActiveSheet.Paste
End Sub

View 9 Replies


ADVERTISEMENT

Move Range To Last Cell On Another Sheet

Aug 22, 2008

Im trying to create a macro that when ran it copies all information from that row and puts it on a different worksheet. It needs to be put on the next available line in the new worksheet. and then the information deleted off the original and all rows moved up to fill in the gap. the rows all contain 2 formulas i'd like to keep specific to the row number Also it contains formulas id like to keep but change the cell numbers according to which row it is copied over to.

View 2 Replies View Related

Copy Or Move Column Ranges From 1 Sheet To End Of Column Range Of Another

Mar 7, 2008

I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.

So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.

If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.

View 8 Replies View Related

VBA Code To Move Data From Entry Sheet To Historical Sheet By Date

Apr 17, 2014

In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that will move data by date from an (Entry) sheet to a (Historical) sheet. I want to enter a date in B3 on the (Entry) sheet. I then enter data into C3. What I would like to happen is when the data is entered into C3 the sheet goes and finds the same date that I entered in B3 and copies that data from C3 into Column E of the (Historical) sheet.

Test3.xlsm

View 5 Replies View Related

Move Rows From One Sheet To Another Sheet Without Having Duplicate Entries

Apr 16, 2014

I need to move the rows from one sheet to another sheet upon clicking the ‘Submit’ button.

I will manually update my efforts in ‘Sheet 1’ and when I click ‘Submit’, it should “copy” the rows to the next sheet (Sheet 2). However, it should not duplicate the entries irrespective of clicking Submit multiple times. Obviously, while clicking ‘Submit’ it should check the entry for that particular employee name and date in the ‘Sheet 2’ and remove that completely and update the new entries and this should avoid duplicates for that date. Every time when I add new entries for a different name and for dirrerent employee, it should keep appending the Sheet 2.

In addition, it should avoid copying the blank rows from Sheet 1 (S. No column will not be blank usually) to Sheet 2.

All this should happen upon clicking the Submit button.

View 9 Replies View Related

Move To Another Sheet

Sep 24, 2009

using VBA, where if in Column I = "TRUE", move the entire row plus the 1 row underneath to sheet named "PaymentData?

View 9 Replies View Related

How To Move Data From One Sheet To Another

Feb 12, 2014

I have an excel spreadsheet,I have a problem and I need a macro , in sheet1 I have several values of 7 numbers in a cell, example 1|2|3|4|5|6|7| up to 93|94|95|96|97|98|99|, which can be found on the columns A, B, C, D, E, F, G, H, I, and I want for example to extract all values that begin with the number 1 ,and to put all the values in the worksheet 2 columns A, B, C, D, E, F, G, H, I,,

For example 1|2|3|4|5|6|7| ,,,,,, up to 1|94|95|96|97|98|99| moved in sheet2 from sheet1.

I tried to extract the filter from the data tab .... sort and filter,,, filter,,,, filter by number,,,, starting with,,,, we apply the filter, but when we selected data values and take that were among the selected what was not good.

I like this :

column A 1|2|3|4|5|6|7| , 21|25|32|43|51|60|73|, 1|2|3|4|52|69|78| ,11|12|30|45|50|61|79| ,3|5|70|74|75|77|79| , 1|22|33|44|50|63|75|, 1|22|33|44|50|63|75|................
column B 1|2|3|4|5|6|23| , 1|2|3|4|5|6|8| , 1|2|3|4|5|6|9| , 1|2|3|4|5|6|10| , 11|21|31|40|52|61|70| , 9|2|3|4|50|68|70| , 1|12|13|24|51|60|77| ,.........
column C 1|2|3|4|50|65|70| , 2|5|7|9|10|16|37| ,5|8|9|14|15|26|67|,,,,,,,,,,,1|94|95|96|97|98|99|.

In these columns I want to extract all values that begin with nr1 .....1|2|3|4|5|6|7|,,,1|90|91|92|93|94|95| from sheet1 in the sheet2, I mean these...

column A 1|2|3|4|5|6|7| ,1|2|3|4|52|69|78| ,1|22|33|44|50|63|75| ,1|20|31|43|55|60|71|
column B 1|2|3|4|5|6|23| , 1|2|3|4|5|6|8| , 1|2|3|4|5|6|9| , 1|2|3|4|5|6|10| ,1|12|13|24|51|60|77|
column C 1|2|3|4|50|65|70| , 1|94|95|96|97|98|99|

View 3 Replies View Related

Move The Picture Top Of The Sheet

Nov 29, 2008

How can I code a Picture so it moves atop a excel sheet?
I dont like the behavior this code runs.
ActiveSheet.Shapes("Picture 1").Select
Selection.ShapeRange.IncrementLeft 0.75

View 10 Replies View Related

Move Rows From One Sheet To Another ...

Dec 23, 2009

i learned how to highlight a row by placing an X in a single cell, my next question is:

Is there a way (most Likely there is) By placing "J/C" into a cell, make the entire row cut and then insert itself into my second sheet on row 2? "insert into a new row and not over existing information?"

now i have done this in the past using a Macro, select the row and then by pressing ctrl+k it would cut the row and then insert it into row 2 of the second sheet.

View 14 Replies View Related

Shortcut Key To Move One Sheet From Another

Oct 8, 2008

I want to know the shortcut key for to move one sheet from another sheet without using mouse.

View 3 Replies View Related

Move All The Results Onto Another Sheet

Dec 1, 2007

I have a "Log Sheet" with dates in one column and times in another column.
Currently I have a formula which matches the months of the year and totals the time during that month below is this formula. (This formula id on the same sheet.
=SUMPRODUCT(--(MONTH($A$5:$A$1426)=1),--(YEAR($A$5:$A$1426)=2008),$F$5:$F$1426)

Now I am trying to clean up the sheet and I want to move all the results onto another sheet Lets call it sheet 2 and sheet 1

sheet one will have the months and times.

sheet 2 i want the formula in each cell, andto place the result in each respecting cell/
This is what I came up with but why is it not working?

=SUMPRODUCT(--(MONTH(Sheet1!A:A)=11),--(YEAR(Sheet1!A:A)=2007),Sheet1!F:F)

View 9 Replies View Related

Vba To Copy Sheet And Move To The End

Jan 24, 2010

i am trying to get a vba procdeure to copy Sheet "Template" and move to the end, but when i run the code, the code copies the template but does not move to the end, how can the below be modifed?

Sub Macro3()
Sheets("Template").Select
Sheets("Template").Copy Before:=Sheets(6)
End Sub

View 9 Replies View Related

Move A Row To Another Sheet Based On A Specific Value (name)

Dec 4, 2013

I have a large document with a lot of names listed. I want to make up new sheets for each person listed. Is there a formula that I can enter that will move the entire row based on the person's name? See attached.

View 3 Replies View Related

Code To Move Active Sheet Tab All The Way To The End (right)?

Dec 10, 2008

I searched and found a couple of different active.sheet codes but could not get it to work. What I want to do is move the worksheet tab I create in the code below all the way to the end (right) of the worksheet tabs already in my workbook.

View 2 Replies View Related

Automatically Move Data To New Sheet

Feb 12, 2014

Is it possible to create a cell in one sheet, where after data is entered, will move it to another sheet. Additionally, the data in the cell, after the transfer to another sheet is made would delete itself. Once the data is entered, sent to another sheet and deleted, next time data is entered into the same cell, it would be sent into a row below the cell that the first piece of data would be in. Therefore, after I enter data, [for example] press enter, then go back to input some more data, after a while there would be a long list in another sheet. The last feature of the problem (it would be something extra really) is that the function/macro is to be time dependent - during one month the data would stack up in one column, after the next one begins, the next column will automatically start all over.

The idea is to create a budget book - where on the main page I would only have to enter the value in a specific box, the value then would be automatically sorted into the right row and column in another sheet, after the month/week ends, data would start to stack up in a column devoted to a new month/week.

Of course the data could be entered manually in different sheets, but it proved to be too complex to be useful.

View 1 Replies View Related

Move (Cut / Paste) From One Sheet To Other With Macro

Jul 24, 2014

Macro, which can cut/Paste from sheet "Pastin" to Sheet "Robot".

The input in sheet Pastin is veritical and the the result is in a row horiontsal.

There can be no references between the names for the columns or rows, only the cell to move.

I would like it to be so when I run the macro it example move it to sheet robot from row A3, and if I do again it make the next one from Row A4.

What I want to move can be seen in below.

Cell on the left is sheet "Pastein" and cells on the right is sheet "Robot"

Special is that one move have to be taken from on cell comma separated input, so it goes to sheet "Robot" for each text/number, between the comma.

I have attached a test sheet to work with also.

[Code] ...

Testmove.xls‎

View 6 Replies View Related

Move Data On Change To New Sheet?

Jan 29, 2014

So I have a sheet that has 9 columns A - I sheet is called "Door Switch Times"

Basicall when column F gets data in it I need then a macro to automatically Copy B, C, D to a
new sheet called "Main". I need B to be copied to C on Main, "C" on Door Switch Timse to be copied to "D" on main and "D" on Door Switch Times to be copied to "E" on Main. I cant post the sheet as my work computer will not allow me to transfer or share files.

View 7 Replies View Related

Move To New Sheet Only When Code Finishes.

Feb 25, 2009

I have a small problem that is more annoying than anything else. I have a command button that opens a userform, and the user can select a value and 'OK'. On 'OK', the code runs, however I would like the sheet 'Information' to remain visible until the code finishes and then switch to 'Task Intervals'. There is also a lot of screen flicker, despite selecting it off/on. I have included an Example file so that you can see the problem.

View 3 Replies View Related

Move/copy And Renaming Sheet

Aug 13, 2009

I have the following code to move/copy worksheet and then copy and paste
special values. Is it possible during this process to get the user to change the 'moved' worksheet name ?

View 4 Replies View Related

Auto Move Cells To Another Sheet

Sep 16, 2009

In Sheet1 is 11 headings.
In column I, titled 'complete?' the user simply puts an x to show that the order is complete.

Once this happens, I would like the information in the row containing the x from columns A to I (but not J and K) to be copied to the next empty row in Sheet2. Then to clear the information from the cells in the row of Sheet1 from columns C to I, but have the data in columns A,B,J,K remain for the next order.

View 4 Replies View Related

Move Value From Calendar 12.0 To Textbox On Sheet

Sep 18, 2009

I understand how to create a basic function and call a function so those things are there. What I am looking at doing is taking the value of the calendar control and placing it in a text box, say TextBox2 for instance. Right now the calendar control is called when the text box has focus and the calendar closes Unload Me when the day is clicked though I don't know how to make the textbox value equal the calendar value.

This is something I am sure is pretty simple though I just can't get it to work. The calendar control is on a userform and the text box is on the active sheet so this is where i am running into trouble i am thinking.

View 5 Replies View Related

Making Button That Can Move A Row To Another Sheet

Jan 27, 2012

I need making a button that can move a row to another sheet.

I have a master sheet with the following data.

Col A - Name
Col B - address 1
Col C - City
Col D - State
Col E - Zip
Col F - Phone number

each row is a diffrent person.

the phone number will be the selected cell and I need a button to move the whole row to another sheet.

View 2 Replies View Related

Move Row Into New Sheet Based On Cell Value?

Dec 5, 2012

I need write a VBA code that will move an entire row into a new sheet if the value of the last cell says "YES" If the value is blank then Id like it to stay in the current sheet. I would also like it if the cell wont allow any other value other than Yes to be typed.

I found this code here:

Copy, Move and Delete Row, based on Cell Value

THE VERY FIRST CODE REPLIED IN THAT THREAD.

I just cannot seem to get it to work. Simply copying and pasting that into the module doesn't work. I am not very good at VBA and just started taking a course on VBA. Id like to jump into this problem asap as I need it for work.

Basically:

Columns A:E will have values. In Column E I would like to type in Yes if completed. I would like the Macro to run through all of Column E and if the cell value is "YES" then I want it to cut the entire row and paste into a new sheet. In the new sheet I would like it to be pasted into the next available row.

Also can I create this with a ActiveX control button? I would like to have a button that I can click at the end of my work which will run the Macro in sheet 1.

View 6 Replies View Related

Cannot Move Objects Off Sheet Error

Oct 18, 2013

I have a database that lets me add columns and do the required vlookups however, when I filter with a particular rule it throws the 'Cannot Move Objects Off the Sheet' error. Also, I cannot see any rows beyond row number 4316 - could this be the reason for the error?

Under 'Advanced' options, I've gone to 'Display options for this workbook' and chosen the 'All; option under 'For Objects show', however, I'm stick not getting anywhere

View 2 Replies View Related

Move Or Copy Data To New Sheet?

Mar 23, 2014

Here's a sample sheet.

I receive spreadsheets with data sorted by column. There might be 500-600 records in approximately 1-8 categories, 14 columns wide. One column is used for the category. I would like to copy or move the data in each category to a new sheet within the file, so I can work with each category separately. I do this manually now, and have to do it multiple times for each file, as the data changes daily.

The category names are rarely the same from one batch to the next, so the routine will have to look at the categories and understand their names in order to put the data on a new sheet. Category names are alpha-numeric, like RA114, RC109.

This seems like a VB app, but I don't know VB! Is there a way to do this without VB? If not, is there a well-documented VB template or utility I might use to modify?

View 4 Replies View Related

Move Data And Format On Another Sheet?

Jul 30, 2014

I've got a workbook with a sheet named Data that has the information laid out in a single row. The data can't be fit onto a single sheet for printing / viewing so I've got a second sheet named Presentation that the data get's laid out to 2 rows so that it can be viewed / printed on a single page.

I'm handing this off to non-technical people so I need an easy way to populate the presentation sheet with the data. I've layed the data out using =Data!A1 however, the drag auto-fill doesn't properly fill it down since it's single row to double row.

Example of Data Sheet
Patient
Chart

[Code]....

View 3 Replies View Related

The Workbook Need To Be Open To Move Sheet

Jan 16, 2007

I am working on code to move worksheets to existing workbooks based on the filename in a cell value. Here are my questions...

1.Does the destination workbook need to be opened before I can move a worksheet there?
2. How can I write the code to take the sheet name which is also in column A of "Data" sheet and the path or destination to move the sheet name to the path that is in column B of the "Data" sheet?
3.Can someone help me with the code?

All the worksheet names and copy destination is in the "Data" sheet. Here is what I have for code...
_____________________________________________________
Dim wbBook As Workbook
Dim qsSheet As Worksheet
Dim dsSheet As Worksheet
Dim wsSheet As Worksheet
Dim dpStart As Range, dpData As Range
Dim ptStart As Range, ptData As Range

Set wbBook = ThisWorkbook
Set qsSheet = wbBook.Worksheets("Query")
Set dsSheet = wbBook.Worksheets("Data")
Set wsSheet = wbBook.Worksheets

With dsSheet
Set dpStart = .Range("A2")
Set dpData = .Range(.Range("A2"), .Range("A65536").End(xlUp))
Set ptStart = .Range("B2")
Set ptData = .Range(.Range("B2"), .Range("B65536").End(xlUp))
End With

For Each wsSheet In ThisWorkbook.Worksheets
If Not wsSheet.Name = "Data" And Not wsSheet.Name = "Query" Then
wsSheet.Copy

View 9 Replies View Related

Automatically Move Data To Another Sheet

Jan 23, 2008

I have Excel 2003. I need a formula that will automatically move data in a row to another sheet, in the same workbook, based on either a two digit department code or possibly a date. I enter information on a master sheet, (8 columns of data: Text/$/digits) and I need that information to separate out to the other sheets when that department's two digit number is entered on this sheet. There are a total of 6 sheets in this workbook, counting the master. The data I am entering will be about 40-50 rows down of information, 8 columns across. Will this take a macro? Loop?

View 9 Replies View Related

Move Strikethrough Rows To Sheet

Nov 3, 2006

It is supposed to take the rows with striketrhoughs and transfer them to the other sheet.

Private Sub Worksheet_Activate()

If Cells.Font.Strikethrough = True Then
Rows.Select
Selection.Cut
Sheets("Completed Deployments").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=True
End If

End Sub

View 8 Replies View Related

Filter & Move Rows To Another Sheet

Dec 6, 2006

I need to update a sheet called Database by filtering the word Served in column F (6th field) of another sheet called Detention Register. After the 'Served' rows have been filtered today's date needs to be pasted into column E for all of these rows.

The filtered entries from A:F only then need to be cut & pasted into the next empty A column cell in the Database sheet. Finally, another macro called Update Database needs to be called.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved