I have a large document with a lot of names listed. I want to make up new sheets for each person listed. Is there a formula that I can enter that will move the entire row based on the person's name? See attached.
View 3 RepliesI am trying to have rows moved from (Schedule) to (Complete) in the attached workbook. The criteria to have the row moved would be the user-selected "Status" list changing to "COMPLETE" in Column G.
I would like to have the row cut and deleted from Sheet4 (Schedule) once "COMPLETE" is selected from the list in Column G with rows below moving up. The row would then be inserted into Sheet2 (Complete) at the top of the list (Row 7) and rows would move down below the new entry. I would also like to have the formatting remain uniform (every other row fill)
I need write a VBA code that will move an entire row into a new sheet if the value of the last cell says "YES" If the value is blank then Id like it to stay in the current sheet. I would also like it if the cell wont allow any other value other than Yes to be typed.
I found this code here:
Copy, Move and Delete Row, based on Cell Value
THE VERY FIRST CODE REPLIED IN THAT THREAD.
I just cannot seem to get it to work. Simply copying and pasting that into the module doesn't work. I am not very good at VBA and just started taking a course on VBA. Id like to jump into this problem asap as I need it for work.
Basically:
Columns A:E will have values. In Column E I would like to type in Yes if completed. I would like the Macro to run through all of Column E and if the cell value is "YES" then I want it to cut the entire row and paste into a new sheet. In the new sheet I would like it to be pasted into the next available row.
Also can I create this with a ActiveX control button? I would like to have a button that I can click at the end of my work which will run the Macro in sheet 1.
I want to do is copy all rows from the worksheet DATA based on column G (Date) and copy it to a new sheet based on the date (all 2003 on the 2003 sheet and all 2004 on 2004 sheet.....).
I have already created the new sheets including headers minus data. I would like to have all the data moved except the last to Columns AW & AX. I have two hidden sheets in this workbook. Would it be possible to have it auto-populate future entries from the "DATA" worksheet to autofill onto the new sheets?
Just noticed that I titled the Thread with Move but what I am asking for is copy. I cannot change the Thread title.
Basically Column O has data that need to be moved to the different worksheet in one workbook.
so If Column O=Bad Number in any row in Column O move to sheet1 or If Column O=Good Number in any row in Column O move to sheet 2 etc.
I have a spreadsheet in which the user will respond to questions using "T" for "True" or "F" for "False". If there is a certain number of T's I would like the macro to take the user to one sheet in the workbook or if there are a certain number of F's I'd like it to take the user to another sheet in the workbook.
View 2 Replies View RelatedI am trying to move info from an unformatted sheet to a sheet ready to import into a program. I need to look at the source sheet and if a column heading matches the heading on the destination sheet I need it to move the entire column to the destination sheet.
View 3 Replies View RelatedI have two sheets:
1. Not yet printed
2. Printed
My data is in sheet 1 (Not yet printed). I would like to move automatically entiry rows (sometimes more then one) to sheet 2 (Printed) based on one cell's value. Here is a screenshot:
For example when I enter into Sheet 2 '264450' then row 2 would have been moved to Sheet 2.
And also with multiple rows, if I enter '264461' then row 4 and row 6 would have been moved to sheet 2 as well. I wouldn't like to enter a value more than once.
I have had several intro programming classes, but not with visual basic. I've noted the problem lines with comments below. The problems are probably very easy syntax error.
Sub list()
Dim counter As Integer
Dim counter2 As Integer
Dim id As Double
Dim id2 As Double
Dim palletnum As Integer
ActiveSheet. Name = "Pallet Detail"
Sheets.Add
ActiveSheet.Name = "Pallet Summary"
Sheets("Pallet Detail").Select
I have a excel file to keep track of sales pipeline. What I am looking for, is an automated utility or code that will allow excel to automatically move entire rows once a task is completed and can be moved to another sheet. In Prospect sheet I have a column for " sales stage" and here you have to select from a drop down menu, either "Prospect", "semi-qualifed" "Pre-qualified" "verbal" "closed-won" and Lost. What I would like, is that once you have selected one of the sales stage, the entire row or entry, will be automatically moved to a new sheet according to each stage.
View 9 Replies View RelatedI have filled up my ComboBox1 with the sheets I want to add information to. My problem now is how to place the info in the correct sheet when I click CommandButton1.
I've been working on this for a few hours now. I got this to work on the first code I found but it didn't work afterward. I just deleted the whole thing and started again.
I'm trying to interrogate a sheet for specific data based on months, I can't seem to set the input to the range any help much appreciated
Mike54
Private Sub updatestats_Click()
Dim Mth As Variant
Mth = InputBox("Please enter the month you wish to analyse")
Dim AL As Integer
Dim January As Range
Dim February As Range
Dim cl As Range
Set January = Range("B4:B57")
Set February = Range("B58:B113")
'March = Range("B4:B57")
'April = Range("B4:B57")
'May = Range("B4:B57")
'June = Range("B4:B57")
'July = Range("B4:B57")
'August = Range("B4:B57")
'September = Range("B4:B57")
'October = Range("B4:B57")
'November = Range("B4:B57")
'December = Range("B4:B57")
For Each cl In Mth
If cl.Value = "Annual Leave" Then
AL = AL + 1
End If
Next cl
Cells(4, 14).Value = AL
End Sub
Basically, I need to copy and paste upon certain condition (references) and paste related-datas in another sheet corresponding with these references. Every references are organized by lines with indicators on columns.
In attached file, see:
- worksheet ANALYSIS:
* datas in E2, G2, D18, D19, D20, D21, D22 that needs to be copy based on reference in C2,
* then need to find this reference in worksheet called GROUP SAVE,
* and based on this reference, paste above cells value in corresponding "Indicators" column number
THEN, I will have to do pretty much the same with subgroup data. But I can figure out for this second step that request same manipulation.
Currently i hav list of info that is long like this.
A 1
B 2
C 3
D 4
E 5
F 6
G 7
H 8
I 9
J 10
How to move row to column example below. Because i want the data to be printed on an a4 paper which can fit around 3 row to save space . If i manually copy paste page by page it is too much.
A 1 D 4 G 7
B 2 E 5 H 8
C 3 F 6 I 9
===
Currently i have macro code which roughly does this.
A 1 B2
C3 D4
E5 F6
G7 H8
I9 J10
Sub test()
Dim rng As Range, m As Integer, c As Range
Columns("c:E").Delete
m = 2
Set rng = Range(Range("a1"), Range("a1").End(xlDown))
Set c = Range("a1")
Do While c <> ""
'MsgBox c.Address
Range(c, c.Offset(m - 1, 0)).Copy
Cells(Rows.Count, "c").End(xlUp).Offset(1, 0).PasteSpecial Transpose:=True
Set c = c.Offset(m, 0)
Loop
End Sub
I am working on the attached price proposal and need my user to be able to enter a number into column E indicating that that row should be printed on the quote. The 'quote' can be new sheet or another area of current sheet that is formatted to look like letterhead.
View 4 Replies View RelatedI work with a sheet with active columns B thru I, which get daily numeric entries. The problem is that I have to enter data in columns H & I first, then go back to B thru G. how to force the cursor to jump to column B when I tab out of I into J?
View 5 Replies View RelatedWhat I want to know: Is is possible to have information from one spreadsheet move specific data to another spreadsheet in the same workbook?
for example: I have hundreds of listings of tool measurements.
Date Tool type Measurements
What I want to do is have all the different types of tools and the information from the above line seperated into other spreadsheets. I do not want to sort this information and manually move it I want a formula that will move each applicable tool into that sub sheet. I have tried to use if statements but find that it creates subsheets with the correct tool types but has the spaces in between the parts. how do I eliminate the spaces?
now I thought about recording the macro, but it's an offset and if you click the chart, then it'll mvoe somewhere else even though the charts are always placed in the middle when generated. So I think I need to place it in a specific range. I want to use XY coordinates or range labels or something to that effect but would like something to this affect:
With Charts.Add
.ChartWizard source:=Worksheets("sheet1").Range("a1:a20"), _
gallery:=xlLine, title:="February Data"
End With
I got that in VBA help, but I'm not using Chart wizard, my code just creates the chart from the data on its own with specific chart type. So anyway, how would I make it put each of my five charts for the 25 people in the same place for every person. Performance Errors etc etc etc all will go in the right place everytime, regardless if you start with the page scrolled. I should do range right, but how do I change this macro to do it without chart wizard...just a chart that's already created and named. QUESTION: How do I place charts that are created from a data source onto a specific area of one worksheet, and those charts are always in the same place regardless of the person'a name.
I'm trying to write a macro that will find a value beginning "ber" and paste it across to a different column. I have had a go at it but I keep getting the offset flagged up.
It needs to move 15 columns across and 7 rows down if that is of any importance.
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that will move data by date from an (Entry) sheet to a (Historical) sheet. I want to enter a date in B3 on the (Entry) sheet. I then enter data into C3. What I would like to happen is when the data is entered into C3 the sheet goes and finds the same date that I entered in B3 and copies that data from C3 into Column E of the (Historical) sheet.
Test3.xlsm
How to do what I am about to ask takes time and time causing brain overloading. I have made screenshots but I can't upload them. I get red exclamation point with images sizing ~55KB
View 9 Replies View RelatedI need a macro to move specific information.
I get an excel sheet with W/C Employer: (whatever) entered below the patient it belongs to in column E. This information needs to move into its own column (H) in line with the above patient information so I can use it in a mail merge to word.
The same thing needs to happen with WC injury date listed in column G. It moves to column I. Then delete the row it was moved from so I don't have an empty row.
Sheet 1 is what I get. Sheet 2 is what I need to end up with.
I need to move the rows from one sheet to another sheet upon clicking the ‘Submit’ button.
I will manually update my efforts in ‘Sheet 1’ and when I click ‘Submit’, it should “copy” the rows to the next sheet (Sheet 2). However, it should not duplicate the entries irrespective of clicking Submit multiple times. Obviously, while clicking ‘Submit’ it should check the entry for that particular employee name and date in the ‘Sheet 2’ and remove that completely and update the new entries and this should avoid duplicates for that date. Every time when I add new entries for a different name and for dirrerent employee, it should keep appending the Sheet 2.
In addition, it should avoid copying the blank rows from Sheet 1 (S. No column will not be blank usually) to Sheet 2.
All this should happen upon clicking the Submit button.
I have a command button that will run paste a value in a specified cell but I also need it to check for the next open cell and paste the data if the previous cell in a specifid rage is already filled with data. Here is my code I have below. *jumps with Joy* My Range is E6 to E10
VB:
Private Sub CommandButton1_Click()
Dim f As Double
Dim t As Double
[Code].....
using VBA, where if in Column I = "TRUE", move the entire row plus the 1 row underneath to sheet named "PaymentData?
I'm trying to create a formula that takes from "Manual" Sheet the number from colume G2 and multiply it by the percentage in sheet "AllocationRule".
My formula currently is =Manual!$G$2*AllocationRule!$B5.
What needs to happen is that the total number in "Manual" needs to be distributed evenly in 4 rows by the percentages allocated in "AllocationRule".
Right now I can't copy my formula over to the sheet because the "AllocationRule" should stop at B5 and not go further and the G2 from "Manual" should not change for the percentage allocation but should change to the next row for the next month.
And then after I've done the calculation I want the LOB in "AllocationRule" to be displayed in the LOB in "H1913_H1914" but I'm not sure what formula to use.
I remember years ago that I made a couple formulas that on sheet one would transfer to another sheet when I enter in sheet one.
View 5 Replies View RelatedI have an excel spreadsheet,I have a problem and I need a macro , in sheet1 I have several values of 7 numbers in a cell, example 1|2|3|4|5|6|7| up to 93|94|95|96|97|98|99|, which can be found on the columns A, B, C, D, E, F, G, H, I, and I want for example to extract all values that begin with the number 1 ,and to put all the values in the worksheet 2 columns A, B, C, D, E, F, G, H, I,,
For example 1|2|3|4|5|6|7| ,,,,,, up to 1|94|95|96|97|98|99| moved in sheet2 from sheet1.
I tried to extract the filter from the data tab .... sort and filter,,, filter,,,, filter by number,,,, starting with,,,, we apply the filter, but when we selected data values and take that were among the selected what was not good.
I like this :
column A 1|2|3|4|5|6|7| , 21|25|32|43|51|60|73|, 1|2|3|4|52|69|78| ,11|12|30|45|50|61|79| ,3|5|70|74|75|77|79| , 1|22|33|44|50|63|75|, 1|22|33|44|50|63|75|................
column B 1|2|3|4|5|6|23| , 1|2|3|4|5|6|8| , 1|2|3|4|5|6|9| , 1|2|3|4|5|6|10| , 11|21|31|40|52|61|70| , 9|2|3|4|50|68|70| , 1|12|13|24|51|60|77| ,.........
column C 1|2|3|4|50|65|70| , 2|5|7|9|10|16|37| ,5|8|9|14|15|26|67|,,,,,,,,,,,1|94|95|96|97|98|99|.
In these columns I want to extract all values that begin with nr1 .....1|2|3|4|5|6|7|,,,1|90|91|92|93|94|95| from sheet1 in the sheet2, I mean these...
column A 1|2|3|4|5|6|7| ,1|2|3|4|52|69|78| ,1|22|33|44|50|63|75| ,1|20|31|43|55|60|71|
column B 1|2|3|4|5|6|23| , 1|2|3|4|5|6|8| , 1|2|3|4|5|6|9| , 1|2|3|4|5|6|10| ,1|12|13|24|51|60|77|
column C 1|2|3|4|50|65|70| , 1|94|95|96|97|98|99|
How can I code a Picture so it moves atop a excel sheet?
I dont like the behavior this code runs.
ActiveSheet.Shapes("Picture 1").Select
Selection.ShapeRange.IncrementLeft 0.75
i learned how to highlight a row by placing an X in a single cell, my next question is:
Is there a way (most Likely there is) By placing "J/C" into a cell, make the entire row cut and then insert itself into my second sheet on row 2? "insert into a new row and not over existing information?"
now i have done this in the past using a Macro, select the row and then by pressing ctrl+k it would cut the row and then insert it into row 2 of the second sheet.