I need making a button that can move a row to another sheet.
I have a master sheet with the following data.
Col A - Name
Col B - address 1
Col C - City
Col D - State
Col E - Zip
Col F - Phone number
each row is a diffrent person.
the phone number will be the selected cell and I need a button to move the whole row to another sheet.
I have a workbook with about 53 worksheets one for every week in the year. They are named as follows:
VA-1-1-09 TO VA 12-28-09 All sheets are hidden except the (VA-1-1-09)
What I am trying to do is create some logic that would keep all 52 sheets Very hidden except sheet VA-1-1-09 Till the second week starts at that time what I would like to see happen sheet VA-1-5-09 come out of very hidden and appear visible and send sheet VA-1-1-09 to just a hidden state. I like to have this happen for every week of the year? If this can happen automatically that would be great however a command button clicked once a week would do the trick as well.
A button macro that will move the whole row of the selected cell to another sheet?
View 3 Replies View RelatedI have a spread sheet that tracks progress reports that are due every 90 days. I have a due date colum that will automatically get high lighted if the 90 days have passed to inform me or my staff that the report is late. I would like to have a colum with a button in each row that allows the reader of the spreadsheet to press "YES" for that accont's progress report having been turn in. When the "YES" button is pressed the date due date column advances to the next 90 day due date and the highlight would turn off.
I used the conditional format to change the due date column to Yellow if =TODAY() is less then or equal to the due date. But I can figure out a way to select something and turn the highlight off and advance the due date to the next 90 day due date.
I have an excel spreadsheet with two tabs.One called "menu" and one called "website"
I want to put a button in tab one (menu) and assign a macro. I need the macro to run/output in sheet 2 (website) not in sheet 1 where the button is placed.
No matter what I do I can't figure it out. The macro always runs in the same sheet as the button.
I want to make a button in a cell that when clicked it will make cells A1:M25 the print area. Then in another cell I want another button that will make cells A28:M52 the print area.
View 5 Replies View RelatedI have a survey with different groups of Control Toolbox options buttons on it. I want to ensure that each question has an option button selected before the survey can be exited and emailed onwards. The grouped button names are: GroupA, Group1 through to Group6.
View 2 Replies View RelatedI have a data validation list in cell D11 on sheet "Data Entry" and a command button "btnMultipleProperties" that I only want visible if "Multiple" is selected in "D11" I have the below code in "This Workbook" in VBE but it doesn't work. What did I miss?
Private Sub Worksheet_Change(ByVal Target As Range)
With Sheets("Data Entry")
If [D11].Value "Multiple" Then
btnMultipleProperties.Visible = False
Else: btnMultipleProperties.Visible = True
End If
End With
End Sub
I�m trying to create a Forward button for each of the sheets in my Excel workbook, to make it easier for users to move from one tab to the next (without having to click on the tab- names in the bottom left corner of Excel). I know it�s very simple to start recording a macro and click on the next tab, and repeat this process for all the tabs in the spreadsheet. But what if you have a workbook with, say, 20 tabs � would you have to record one macro to take you from Sheet 1 to Sheet 2, another to move you from Sheet 2 to Sheet 3, and so on all the way up to Sheet 20? This would be very time-consuming. Is there some VBA code which always moves you to the next available tab in the workbook? Or is there no alternative to recording a separate macro for each individual tab?
View 7 Replies View RelatedI want play a trick on someone and make a button move out of the way when they try to click on it. I think that this code is from VB6.0:
Private Sub CommandButton1_MouseMove(ByVal Button As Integer, ByVal Shift As Integer, ByVal X As Single, ByVal Y As Single)
CommandButton1.Move Rnd(100) * 4000, Rnd(100) * 4000, 1000, 1000
End Sub
In Excel, this code results in Run-time error '438': "Object doesn't support this property or method."
Is there a way to "move" a button in Excel VBA?
I made a time sheet. In this time sheet i made a macro where when I press ctrl+t it fills in the date in a column and the time in the column next to it. So to start my day I would press ctrl+t and to end it i would goa column over and repeat the macro. and then i made it so that in the fifth column it adds the 2 times together with this formula "=IF(E27>0,(IF(G27>E27, G27-E27, 1+G27-E27)),"")" formula works fine unless you make a "mistake" and change the ending time manually to a time that is early then the starting time but on the same day. So I wanted to see if there is anyway of the total time column can return an error message if the ending time is earlier then the starting time by looking at the date in both date columns. Im going to attach the workbook to this post. on the tabs on the bottom it is under time sheet. and i think the macros should transfer over too. ctrl+t is the time macro if you want to try it out.
I may have not been so clear on explaining it so ask any questions if that is true.
I need to make a "aummary" or a pod sheet? what I need to do is make a page that will automatically tally up new information I put into new work sheets. right now I have 5 work sheets and the totals I need totaled are in different row #'s on each sheet. How can I do this so it will add the numbers automatically?
View 9 Replies View RelatedI try find function or create macro witch makes move in to the specified column after clicking on button. But this move will be in the same row, where i was last active.
View 2 Replies View RelatedI'm making a Userform for commands I use a lot, like concatenation and highlighting cells. I placed a command button on the sheet that pops up whenever I open Excel. It's a bit awkward to have it on the sheet. Is there a way to place the button on the ribbon to get it out of the way? (I'm on an intermediary level with VBA
Another alternative would be to make a hide button on the userform, I guess. Once it disappears though I'd probably need another button to call it up again.
My data is now 500+ lines long but the button is on row 1. I have to get back to the top to click it. Can I auto move the button down with my data. Say to one line above my data. i.e. 499 and move as my data increases.
View 3 Replies View RelatedAttached is a document, column C & F highlighted in green are areas that users will input data. I need to create a button (top left of spreadsheet) that when pressed moves both the data from column C & F up into the box above. The top set of dates would be deleted and the dates from Trip 2 would move up into the Trip 1 position, Dates from Trip 3 would move up into Trip 2 position and so on.
View 2 Replies View RelatedThis is the macro I am using
Sub Macro3()
'
' Macro3 Macro
'
Range("C2").Select
Selection.Copy
Sheets("Table").Select
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(1, 0).Range("A1").Select
[Code] .....
It does everything I want but take F2 info and send it over. But F3-F6 does go over.
I am looking for a way to move workbooks to a new instance of excel by the click of a button. For example if I have multiple workbooks open under one instance of excel I do not want to have to minimize this and that... I have multiple monitors and I would like to hit a button on a selected workbook and have it auto open it to a new instance of excel. I image this may not be apart of excel and that it might require a macro to do so.
View 1 Replies View Relatedi want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format
View 1 Replies View Relatedhow can i define, in vba that after click on button in sheet1, it looks at value in cell B1 in this sheet and move my cursor exactly on this value in sheet2 where i have data in range (B4:C6000).
View 2 Replies View RelatedIn the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that will move data by date from an (Entry) sheet to a (Historical) sheet. I want to enter a date in B3 on the (Entry) sheet. I then enter data into C3. What I would like to happen is when the data is entered into C3 the sheet goes and finds the same date that I entered in B3 and copies that data from C3 into Column E of the (Historical) sheet.
Test3.xlsm
I need to move the rows from one sheet to another sheet upon clicking the ‘Submit’ button.
I will manually update my efforts in ‘Sheet 1’ and when I click ‘Submit’, it should “copy” the rows to the next sheet (Sheet 2). However, it should not duplicate the entries irrespective of clicking Submit multiple times. Obviously, while clicking ‘Submit’ it should check the entry for that particular employee name and date in the ‘Sheet 2’ and remove that completely and update the new entries and this should avoid duplicates for that date. Every time when I add new entries for a different name and for dirrerent employee, it should keep appending the Sheet 2.
In addition, it should avoid copying the blank rows from Sheet 1 (S. No column will not be blank usually) to Sheet 2.
All this should happen upon clicking the Submit button.
I am running excel 2010 with windows 7. I created a macro in sheet 1 and I wish to activate the macro from sheet 2 using a form button. I have entered the code below. I know how to perform this function on a more simple macro like adding names to cells. This code is a bit more complex I just dont know where to start.
Code:
Sub LoanData()
'
' LoanData Macro
[Code].....
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
Sub OptionButton222_Click()
With Worksheets("Beam Input")
.Shapes("Notch 1").Visible = False
.Shapes("Notch 2").Visible = False
End With
End Sub
Sub OptionButton223_Click()
With Worksheets("Beam Input")
.Shapes("Notch 1").Visible = False
.Shapes("Notch 2").Visible = True
End With
End Sub
Sub OptionButton224_Click()
With Worksheets("Beam Input")
.Shapes("Notch 1").Visible = True
.Shapes("Notch 2").Visible = False
End With
End Sub
i need to modify it so that a selection on the beam input page causes the images to change on the beam output page. Currently this code is in the module section of VBA.
I have two sheets and two listbox's(ColumnCount8) and one command button.
lstInYard rowsource is set to sheet1
lstMilled rowsorce is set to sheet3
Iam trying to cut and paste the selections in lstInYard to lstMilled as well as the corrosponding row values in sheet1 to sheet3 by using cmdMoveSelected click event.
using VBA, where if in Column I = "TRUE", move the entire row plus the 1 row underneath to sheet named "PaymentData?
A client buys 500 minutes of my time. In one week I spend 340 minutes on the account. I'd like a column to show Time purchased (say 500 Minutes) Time spent and a final section showing time left (but showing negative values in red)
I hope I've explained this ok but here is an illustration of what I'm trying to achieve in Excel 2011.
[URL] ...........
I have an excel spreadsheet,I have a problem and I need a macro , in sheet1 I have several values of 7 numbers in a cell, example 1|2|3|4|5|6|7| up to 93|94|95|96|97|98|99|, which can be found on the columns A, B, C, D, E, F, G, H, I, and I want for example to extract all values that begin with the number 1 ,and to put all the values in the worksheet 2 columns A, B, C, D, E, F, G, H, I,,
For example 1|2|3|4|5|6|7| ,,,,,, up to 1|94|95|96|97|98|99| moved in sheet2 from sheet1.
I tried to extract the filter from the data tab .... sort and filter,,, filter,,,, filter by number,,,, starting with,,,, we apply the filter, but when we selected data values and take that were among the selected what was not good.
I like this :
column A 1|2|3|4|5|6|7| , 21|25|32|43|51|60|73|, 1|2|3|4|52|69|78| ,11|12|30|45|50|61|79| ,3|5|70|74|75|77|79| , 1|22|33|44|50|63|75|, 1|22|33|44|50|63|75|................
column B 1|2|3|4|5|6|23| , 1|2|3|4|5|6|8| , 1|2|3|4|5|6|9| , 1|2|3|4|5|6|10| , 11|21|31|40|52|61|70| , 9|2|3|4|50|68|70| , 1|12|13|24|51|60|77| ,.........
column C 1|2|3|4|50|65|70| , 2|5|7|9|10|16|37| ,5|8|9|14|15|26|67|,,,,,,,,,,,1|94|95|96|97|98|99|.
In these columns I want to extract all values that begin with nr1 .....1|2|3|4|5|6|7|,,,1|90|91|92|93|94|95| from sheet1 in the sheet2, I mean these...
column A 1|2|3|4|5|6|7| ,1|2|3|4|52|69|78| ,1|22|33|44|50|63|75| ,1|20|31|43|55|60|71|
column B 1|2|3|4|5|6|23| , 1|2|3|4|5|6|8| , 1|2|3|4|5|6|9| , 1|2|3|4|5|6|10| ,1|12|13|24|51|60|77|
column C 1|2|3|4|50|65|70| , 1|94|95|96|97|98|99|
How can I code a Picture so it moves atop a excel sheet?
I dont like the behavior this code runs.
ActiveSheet.Shapes("Picture 1").Select
Selection.ShapeRange.IncrementLeft 0.75