Clear A Worksheet
right now i am clearing a worksheet via VBA with the following:
but the problem is if I had 5000 rows on that sheet, then i clear the sheet and perform an action that only displays a hundred rows.... if i then go to that sheet and press ctrl+end, it jumps to row 5000... not row 100.
so its like the original rows weren't completely cleared.
what is the vba code to totally clear a worksheet??
View Complete Thread with Replies
Related Forum Messages:
Clear All Cells On Another Worksheet
I have the following code in a Excel 2003 spreadsheet with hope that I can clear contents of unlocked cells in one excel file from the code stored in another Excel file.
' CLEARSJCCOUNT Macro
' Macro recorded 02/21/2008 by Steve Keene
I get the Subscript Out of Range error window when it hits the first line of code.
I've reviewed this via searching for other posts, but none seem to solve the problem directly.
Clear All Worksheet Cells
Gotta question about destroying the contense of a worksheet. If for instance I got a macro which uses a different source everytime I run it, and this macro gives a result in a result worksheet. How can I possibly delete the contense of the result worksheet automatically before the execution starts? What I mean is: without selecting all the cells and pressing delete or either using a for loop to go through all the worksheet cells. Is there any function which clears the contense of a worksheet? (without deleting the worksheet itself)
Clear And Print Tabs In A Worksheet With Checkboxes
I have a workbook with 100 tabs and I have an index page with checkboxes for each tab. I need a macro that will clear all of the checkboxes on the page with one button and a separate macro that will print only the checked tabs.
Can anyone write that code for me so I can just add it into my index tab?
Conditional Clear Based On Other Worksheet Range
I have a range on worksheet "CONTROL" from S129:S228. There are 100 rows there. I have another range on the active sheet from B17:N116, also 100 rows. If S129 has a value of 1, then I need row 17 on the active sheet to be cleared (columns B-N). And so on all the way to the bottom of the ranges. If it has no value in the cell, then no clearing takes place. So it needs to test the whole range at once. I really have no clue what the variants and ranges should be, and have NO CLUE how to define a variable range so that I can use the value that R is on in the testing cycle to tell the active sheet which row to delete.
Clear Data ....
I have a huge amount of data that I use VBA code to calculate totals. I have a macro 'reset to zero' which states a cell contacts should be zero. ie G10 = 0
For some reason when I rerun the macro it adds the data again instead of clearing the first total. For example instead of G10 totaling 19 it now shows 38. But if I close the file and rerun the macro it is right.
Clear Used Range
I have a table on a worksheet and have for quite some time used a very successful macro UsedRangeClear. I found here on the forum. Anyway the macro still works on all tables on all other sheets except this one. This is the reason, somehow someone, maybe even me, copied something down or formated down to the 1,048,152th row of the worksheet. My workbook has grown from 5000 kb to 11,000 kb.
I have tried to highlight and deleted the rows, highlight and clear contents and the following macros:
On Error Resume Next
Dim LR As Long
LR = Range("A" & Rows.Count).End(xlUp).row
On Error Resume Next
Application.ScreenUpdating = False
ActiveSheet.ListObjects("Table7").Resize Range("A1:T" & LR)
Application.ScreenUpdating = True
Each option freezes Excel. I am sure there is something easy I am just missing. Soooo, Please offer any suggestions you can think of.
A Loyal Mr. Excel Follower
Clear #VALUE! From Cells?
I am getting a #VALUE! error in one of my cells. I know it is because my worksheet is missing information to complete the formula. The information will be inputted periodically in the worksheet (lets call it worksheet number one). But, I have the results of cells in worksheet one that are tied to worksheet number two. Worksheet number two is getting the #VALUE! also until worksheet number one is completed (periodically).
But, in worksheet number two, I have an auto sum that adds up the results from worksheet one so I am getting the same #VALUE! error on the auto sum because only a few worksheet from worksheet one are complete. Is there anyway to clear the #VALUE! and get a number in the auto sum even if only a few worksheets from worksheet number one are inputted?
Clear The Clipboard
I'm trying to clear the clicpboard using VBA so i don't get messages asking me what to do. is this possible and if so how? i could simply turn all alerts off but i rather not.
Clear Value From Cell
I have written a vb code to import data from notepad to excel.
I have created a command button to clear those data after excecuting certain function.
For eg. if i have data in column A,B & C of excel i want a code which will clear the value in B & C only starting from a specific row of that column.
Print And Clear
I HAVE JUST PUT THIS CODE TOGETHER
Private Sub printcmd_Click()
Dim lastrow As Integer
BUT MY PRINTER HAS BROKE AND DONT GET A NEW ONE TILL NEXT WEEK
AND WAS WONDERING IF THIS WOULD PRINT AND THEN CLEAR WHAT WAS ON THE SHEET OR NOT
I'm currently opening up worksheets, copying the data there inside tables and pasting it over to a new worksheet which is basically the summary of all the data, unfortunately because I am moving large amounts of data, half way through the process I get a pop up asking me if I want to copy data to wherever to make sure it's stored or do I want to loose it, of course it's only a matter of hitting the no button to re-write the data so copy and paste carries on working but is there no function in VBA to clear the clipboard after every copy and paste, such as clipboard.clear, or something along those lines? Anything that will stop this message from appearing, I was my summary worksheet to work without popups appearing because then that would mean someone would have to sit there as it copies and pastes values, clicking no every time the clipboard gets full.
Macro To Clear Contents.
I'm trying to figure out code to have only the contents of cell 'a2' cleared when the contents of cell 'a1' is changed. The issue is that both cells are derived from lists and I don't want the formats cleared.
Clear Data Only, Not Formulas
i need to refresh the sheet and clear all contents that are constants not as a result of formula.
i search the forum and got this code,
If ActiveCell.locked = False And Activecell.Value <> 0 Then
ActiveCell.Formula = "0"
may i need to make use of loop to check whole sheet
Clear All Data Macros
I have 2 different Clear all data Macros
I will post the 2 different Macros now, then explain a slight modification needed if Possible;
Dim lastrow As Long
lastrow = Cells(Rows.Count, 1).End(xlUp).Row
If lastrow < 3 Then
MsgBox "Nothing to clear!"
Range("A3:A" & Rows.Count).EntireRow.ClearContents
Clear Macro 2
Dim lastrow As Long
lastrow = Cells(Rows.Count, 1).End(xlUp).Row
If lastrow < 5 Then
MsgBox "Nothing to clear!"
Range("A5:A" & Rows.Count).EntireRow.ClearContents
Basically can the following be added as a fail safe.
I assign a button to each macro (which are on different sheets in workbook).
If I click on say the assigned macro button called "Clear All" for 1 of the macros, can a pop up box appear?
And say, "are you sure you want to proceed" or it could say "Clear All" and have a "yes" and "No" check box?
Quite simply, I've accidentally clicked on these a few times
If this was included in the macro, then I wouldn't loose all my data accidentally
Clear Non-blank Cells
The best script to clear all non-blank cells, in my case from Cells(7,1) forward. I currently use this:
.Range(Cells(7, Columns.Count), Cells(Rows.Count, 1)).Value = ""
Will this scipt take a lot of memory to execute? Is there any other method?
Reset Memory Or Clear Old Value
How come I keep having the same value for "lastrow". eg: 35
lastrow = ActiveSheet.UsedRange.Rows.Count
It doesn't matter how many rows of data I've changed, it still show lastrow = 35.
I tried to add an extra line above but still doesn't work:
lastrow = 0
lastrow = ActiveSheet.UsedRange.Rows.Count
Macro To Clear Data
I have a spreadsheet that I enter data for cash flow purposes on a daily basis. At the beginning of each month I need to clear out the data containing values only as well as values beginnining with an = for eg 20000+50000+25000+74000 etc, but not formulas and text
I need the macro to clear the values , including data that has been added up as explaimned above from row 9 onwards and from column C
Clear A Formatted Cell
I have a cell that I've formatted to dd/mmm/yy, It used to work, but now it doesn't. When I type in 1/2/03, the formatted cell shows 0-Jan-00, The formula bar shows =1/1/2. I seem to have a formula in the cell, but I can't get rid of it. I know it's most probably somethinmg I've done , but I don't know what. I've tried everything I know. I can't seem to re format the cell , and I can't delete the formatting in it. I'm stuffed.
Clear Selection Areas
I frequently receive workbooks containing up to 50 sheets and on most of them there is a selected area.
Is it possible to put a bit a code in the worbook when opening to clear all selected areas on all sheets.
Clear Data Macro
I've reformatted the spreadsheet, and now some of the data are in merged cells.
The code lnow ooks like below, (Which I thought would work) but it doen't work ,,, and I'm not sure why
If Range("J5:K5,D12,G11:H11,M11:O11") = Empty Then
MsgBox "No data to Clear."
MsgBox "All Data Has Been Cleared", vbInformation
My sheet (An excel 2007 macro enabled version), I've just uploaded here, in case anyone needs to view it, I just don't know why it won't work?
There are just 4 boxes to clear,
Box 1,, is cell J5 & K5
Box2 is cell D 12
Box 3 are cells G11 & H11
& Box 4 are cells M11, N11 & O11
Automatically Clear The Formatting
When doing vlookups, I frequently encounter an issue where one column isn't formatted the same and the vlookup won't work.
As an example I am trying to do a vlookup from a sql report downloaded to excel and the formatting on the column isn't right. If I type over the data, the vlookup works.
Is there a way to automatically clear the formatting so the vlookup will work.
Macro To Clear Cells
I have data in columns a,b,c and d from row 1 to about 200 right now. Every week another 9 rows are added. I wanted to create a macro that will delete the last 9 entries in each column.
Clear Range From All Worksheets
I have a macro to clear all contents for a sheet in a workbook. The problem is that every file has over 20 sheets of data. Is there a way I can code a for statement to clear all sheets in this one workbook? Is it possible to make a for statement for multiple workbooks with several sheets?
Application.CutCopyMode = False
Selection.Interior.ColorIndex = xlNone
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
Selection.Borders(xlEdgeLeft).LineStyle = xlNone
Selection.Borders(xlEdgeTop).LineStyle = xlNone
Selection.Borders(xlEdgeBottom).LineStyle = xlNone
Selection.Borders(xlEdgeRight).LineStyle = xlNone
Selection.Borders(xlInsideVertical).LineStyle = xlNone
Selection.Borders(xlInsideHorizontal).LineStyle = xlNone
Clear List Box
I am having trouble clearing a multiselect list box.
Currently have a user form with a list box that displays 200 records and allows users to select multiple entries, via checkbox, sometimes as many as 20 to 30 records. I would like to write some code that I can link to a command button that clears the list box and allows the user to start the selection process again without having to uncheck all the entries manually.
Speed Up Frame1.Clear
I have a Frame on a UserForm. The Width of the frame depends on values given in TextBox.Dat1 and TextBox.Dat2.
Now I tried it with a width of 2200 with a scroll bar, but when I change the value in the Textboxes I need the Frame to be cleared. Now this is my question. I use "UserForm1.Frame1.Clear" but this can take up to 1 minute.
Is there anyway to speed this up?
Clear Contents If 2 Characters Or Less
I am looking for a way to remove text from a cell if it is 2 characters or less but do nothing if the text is longer than that. Is there a way to do this with either a function or an advanced find?
For more detail, I have a list of middle initials and last names. The cells are either a middle initial by itself like "D." or they are a last name like Jones. I want to go through and delete the cells that have the middle initial and leave the ones with the last name. So if there is a function that will evaluate the cell, and if it is 2 characters or less, then delete the contents. If greater than 3, leave it alone.
Clear (not Delete) Duplicates
i'm trying to do sounds simple enough. I have 2 Columns of data, example;
I want to clear (not delete) the cells with a duplicate date in them while keeping the cell with the number next to it. So in this case they would be A2, A5, A8, A9. I've come up with a code that looks pretty logical but it doesn't work. Here's what it looks like.
Clear Command Button
I want to create a command button that will clear whatever is written in a text box. I guess for this to work it needs to select all, then clear. The command button and the text box have been created using the control toolbox.
Clear Autofilter Range
I'm wrinting a macro to copy specific data from a table. To do that I'm using a Autofilter and a list of criteria. The macros works fine for existent data, I'm mean, when the result of the filter is not null, but when the filter doesn't find a result, instead of clearing the filter range, it keeps the last valid. The result is a colapse and freeze the Excel. I'd like to know how can I reset or clear the filter range?
The code I'm using is:
Dim rng As Range
Dim rng2 As Range
Dim filter_valid, filter_invalid As Variant
filter_valid = Array()
filter_invalid = Array()
'Criação do Arquivo de Destino
Caminho = "D:Documents and Settingscjcs.ABMeus documentosAutomaSIPPPlanilhas"
Nome_Arquivo = "Produtos_Tanques.xls"
Nome_Completo = Caminho & "" & Nome_Arquivo ...
VBA Clear Contents
i am trying to use clearcontents with the below code but i get an error,
.ClearContents Range("J7:J" & .Range("A" & .Rows.Count).End(xlUp).Row)
.Formula = "=H7-I7"
.AutoFill Range("J7:J" & .Range("A" & .Rows.Count).End(xlUp).Row)
How To Clear Userform Memory
I have 2 userforms (userform1 and userform2)
userform1 has a combobox1 (list of customers) with an commandbutton1
userform2 has many textboxes
when I click on the userform1.commandbutton1 - userform2 shows with textbox1.text being what was in userform1.combobox1
when i am done with userform2 and click close to go back to userform1, chose a different customer and click the commandbutton1, userform2 opens with the previous value.
how can i clear the previous?
currently when i close userform2 with commandbutton1 i use the following code
Private Sub CommandButton1_Click()
set userform2 = nothing
Clear Duplicate Entries
I am trying to find a macro that will clear duplicate entries in a column of data, and then move to the next column and repeat the process until it gets to a blank column.
There are blank cells between entries in a column. I need to keep the data unsorted as the cells are linked to others in the row, therefore I dont want to delete the cells, just clear the contents.
Clear Cells Using VBA
I need to clear all cells in a column that have a particular value. The value is sometimes a constant like "0" (zero) and sometimes is a value based on a formula. Is there a VBA code that will allow me to select those cells in column matching a particular value and clear them?
Clear Cells With Specified Style
I have a spreadsheet wherein the defined data input cells are formatted using styles, i.e. data input style. I would like to know how to select all cells formatted with that style within a spreadsheet (whether worksheets are visible, hidden or very hidden) and delete the contents of those cells while still keeping the cell style.
Clear Variable Range
why the first version below works but the second doesn't
ThisWorkbook.Worksheets("GBP%"). Range(Cells(8, c), Cells(z, c)).ClearContents
Worksheets("GBP%").Range(Cells(8, c), Cells(z, c)).ClearContents
c = 16 (uses a for statement to go through columns 16 to 111)
z = in this case 24, but is dynamic depending on number of files in a list
Currently using Windows 2000 with office 2000
Clear Contents Vs Delete
I've been pressing on with my project and figured out that I really do not know the difference between Deleting and Clear contents. I really thought they were the same but am now unsure. I guess I have 2 questions. Which is better to use? what I'm doing is removing old data and importing new data. and which is more efficient for writing code.
Clear Range On Another Sheet
I have used the VBA and it works to select all data but I have an issue when there is no data to select beneath the column header. I am running this on multiple worksheets which vary with data week to week.
Sheets("sheet1"). Range("A6:G" & Range("G" & Rows.Count).End(xlUp).Row).Offset(0, 0).Select selection.ClearContents
How can I run this and not have it delete the column header when there is no data? Is there a way to change the formula so that it selects all cell columns of data without defining it?
Clear Find Settings
In microsoft word you can clear find criteria like below.
.Text = ""
.Replacement.Text = ""
.Forward = True
.Wrap = wdFindStop
.Format = False
.MatchCase = False
.MatchWholeWord = False
.MatchWildcards = False
.MatchSoundsLike = False
.MatchAllWordForms = False
Clear Userform By Button
I have a CLEAR FORM command button
What codes can I use so that when I click CLEAR FORM, all the data that I encoded in the textboxes of my current userform will be erased as if I have a fresh new form?