Code To Add Sheet Formula Reference To Column
Aug 22, 2008
I need to copy a range of values from sheet 3 to sheet1. When I recorded macro, I got the below code. But, instead of RC in the 4th line <ActiveCell.FormulaR1C1 = "=Sheet2!RC"> I need to pass values like A1,A20 etc.
Since the values range & column to be copied would be varying dynamically, (say for first iteration it would be A1: A20 & for second iteration, I need to copy C1: C20.) how to pass these variables to the macro and use it instead of the static "RC". Whatever column I specify, it should copy from that <column>StartRow to that <column> EndRow.
Sub Updtval(StartRow As Integer, EndRow As Integer, f As Integer)
Sheets("Sheet1").Select
Range("A1").Select
ActiveCell.FormulaR1C1 = "=Sheet2!RC"
Range("A1").Select
Selection.AutoFill Destination:=Range("A1:A6"), Type:=xlFillDefault
End Sub
View 3 Replies
ADVERTISEMENT
Mar 21, 2008
I have a formula that I want to insert using a macro, so how do I iterate the * values in this line?
ActiveCell.FormulaR1C1 = "='Sheet1'!R[*]C[*]"
View 9 Replies
View Related
Mar 6, 2008
A 'Days Attended' cell (N8) and a 'Days Absent' cell (O8). N8 needs to count the number of "Present" values there are on another worksheet. The other worksheet has dates across the top and names down the side.
When i use
=COUNTIF("Attendance!C9:Z9", "Present"),
and the next date comes along the formula changes to
=COUNTIF("Attendance!D9:AA9", "Present")
ie. the reference moves a column across - the new date's absent or present is not counted. Using =COUNTIF(INDIRECT("Attendance!C9:Z9"), "Present"). is no good because when i add a new name i need the row reference to move down as a row is inserted. ie. both person's formulas count the same row. So, my question: I need the columns to stay the same - C:Z (leyway for future dates) and the rows to change as i insert or delete people from the system.
View 2 Replies
View Related
Jun 29, 2008
how to use VBA to write a formula in one sheet that refers to a fixed cell on the sheet to the right. The referenced sheet may have different names and it may be in a different order (i.e. not Sheet(2)) but it will always be one sheet to the right. I just want to have cell A1=(cell B2 one sheet to the right).
View 7 Replies
View Related
Jun 10, 2008
I have a UDF in Cell Sheet1!A1 that inputs some ranges from Sheet1 and calculates a number. Then I have a sub that calculates the value of this function with Evaluate(Sheet1!A1.formula). However, this only works when I am in Sheet1. Otherwise, I get the wrong calculation. How can I avoid this? I will post the code in the open source forum as it otherwise is quite good and automatically resizes array functions to their proper size.
View 2 Replies
View Related
Aug 14, 2007
Is it possible to make a textbox or combobox the reference of a formula in a cell?
I know that you can just do this on VBA, but if possible I don't want to do that in this particular case.
View 6 Replies
View Related
Jul 8, 2009
i have a button that copies data from cell
A5:K5, and pastes it in Sheet2 of my workbook.
The data is ordered like this
------
------
------ button1
------
------
------ button2
------
------
------ buttonX
I have like 40 buttons attached to 4 rows each. And in that group of rows, i have some cells with an IF= formula, and some minor coding.
The problem is: If i press button 3,4,17,29 before i press every other button before that. I get an reference code fail at the cell.
If i press the buttons in order. Like 1,2,3,4,5,6,7 - it appears smoothly.
More info: The button copies data from for example A5:K5 and pastes it into the next blank row of sheet2. But i want to be able to press button 2 before i press button1, without getting an error in my =IF cell.
If i press the 40 buttons in a row, and then starts to mix up the button pressing. It appears smoothly.
View 9 Replies
View Related
Jul 30, 2014
I have this formula (which will soon be much more complex...):
=COUNTIF('dt-a'!C2:C194,'what they want for each teacher'!D1)
I would like to be able to replace the sheet names with a reference to a cell which contains the sheet names.
This is so that a user can enter the sheet name in a cell without having to modify the formulae, break the formulae, and then come running to me ranting about things not working and how computers never work properly.
View 1 Replies
View Related
Dec 13, 2008
I have the following formula: =IF(ISBLANK('WP'!D4), "", 'WP'!D4). where WP is the name of the sheet. I need to reference the sheet not by name, but by it's number (for example WP could be my second sheet, but tomorrow the name of my second sheet could change to WT).
View 5 Replies
View Related
Jan 15, 2014
I have a workbook with several sheets, this question focuses on two sheets. 'Coded Prehospital Data' and 'Missing Pre Hospital Data', for brevity here i will refer to them as coded and missing respectively.
In coded the cells are populated using an index/match fx to another sheet and if that returns an error the fx looks to the same cell in missing for a value
Here is an example of the formula in coded cell C2:
=IF(OR(ISERROR(INDEX(MATCHAGEUNIT,MATCH(A2,MATCHCC,FALSE))),
ISBLANK(INDEX(MATCHAGEUNIT,MATCH(A2,MATCHCC,FALSE)))),VLOOKUP(
'Missing Pre Hospital Data'!D2,AGEUNITSCODE,2,FALSE),INDEX(MATCHAGEUNIT,MATCH(A2,MATCHCC,FALSE)))
Without having to constantly switch between sheets I would like to set up a conditional format that fills a cell in missing yellow when that cell is an error in coded.
This is what I have done to achieve this with no success:
1) Select cell C2 in missing and add rule based on formula
2) Enter =OR(ISNA('CODED PREHOSPITAL DATA'!$C2),ISBLANK('CODED PREHOSPITAL DATA'!$C2))
3) Enter the custom formatting I decided on
4) In the "Applies To" box I have done two things: 1) drag the cursor from c2 to an28 which auto fills the applied to dialogue box with 'Missing Prehospital Data'!$C$2:$AN$28 and 2) Free type in the dialogue box 'Missing Prehospital Data'!$C2:$AN28
My problem is that I need the formatting for each cell in missing to refer to its sister cell in coded but it continues to refer only to coded c2
View 3 Replies
View Related
Aug 14, 2008
Normally when you double-click on a formula you see its component cells highlighted.
But when I do this with a formula that uses cells from different worksheets NO cells are highlighted.
I wonder if anyone knows how to get the highlighting working for such formulas. Or is there an add-on which enables this?
View 9 Replies
View Related
Jan 21, 2008
After having searched for a while I can't seem to find any formula that will look at a cell for reference as to which sheet to go to and return a certain cell's contents.
For example,
in column A, I have the text "Sheet1" and in column B, I need the formula to return the contents of cell B15 from Sheet1, based upon column A.
View 7 Replies
View Related
Mar 6, 2008
I have Excel 2007, here's what i want to do. I've got a workbook created with several worksheets in it. I want to input the name of a project in say, cell A1 on sheet1. Then on sheet2 cell C4, I want the text I input into the afore mentioned cell to show. I know how do do this with numbers (using the autosum button), but I can't figure out how to do it with text, though it's probably very simple & I'll be embarassed when I get an answer. Following is EXACTLY what I'm trying to do if the above example is confusing.
I have a Project Cost sheet and on it I input (text) a description of a building to be constructed. The cells next to it will be the associated costs of that particular building. There will be several buildings listed on the sheet. On a Sales Figures Sheet in the same workbook, I want to list those same buildings and then their corresponding sales prices. I want these descriptions to be automatically pulled from the costs sheet, so that I only have to input the sales figures.
View 2 Replies
View Related
Aug 13, 2008
Im trying to copy a formula to a cell via VBA.
Range("A3").Select
ActiveCell.FormulaR1C1 = "=Sheet1!A3"
Ive tried all sorts of ', ", &, combinations, I cannot find it.
View 4 Replies
View Related
Jun 9, 2009
I have this formula in excel 2007:
=COUNTIFS(Blad1!W:W;"1";Blad1!X:X;"H")+COUNTIFS(Blad1!W:W;"6";Blad1!X:X;"H").
Blad is Dutch for sheet, by the way.
In this formula, I want to let the ranges in Sheet1 be dependent of values in Sheet2. The formula itself is in Sheet2.
W must be replaced by the value of Sheet2!B12 and X to be replaced by the value of Sheet2!B9.
I tried this by using the INDIRECT formula, but the quotation marks of the search values are giving errors.
View 6 Replies
View Related
Nov 22, 2009
I was using the formula below which was working fine for copying across 20 columns and down however many rows, but now the requirements have changed to 90 columns. I have tested this out with the 90 columns but the Indirect function is bogging down the spreadsheet with the constant recalculating.
=IFERROR(INDIRECT("'"&COLUMNS($A$1:A$1)&"'!P"&ROWS($A$1:$A8)),"")
I rearranged the formula to the one below, but how can I have the reference to the sheet name changed as in the formula above without using the Indirect?
=IFERROR(INDEX('1'!$A$8:$AT$115,MATCH($A3,'1'!$A$8:$A$115,0),MATCH("PAT",'1'!$A$7:$AT$7,0)),"")
The sheet reference will change from '1' through '90'.
View 7 Replies
View Related
Oct 22, 2007
Currently I have a worksheet which is organized to have two pages on it. I will try to explain, i.e. imagine one page of the worksheet in the hypothetical range of A1:D26, then another page in the range E27:K50. So it is staggered on the same sheet. Is there an easy way to copy the range of E27:K50 onto another worksheet.
Aside from the regular copy and paste, I am having problems because there are formulas in the 2nd range (E27:K50) which loose their references once copied.
i.e the formula SUM(A1:A10) I would like to be SUM('Master List'!A1:A10) on the new sheet. Is there an easier way then going through all the formulas and adding the master list part.
View 5 Replies
View Related
Aug 14, 2009
I'm trying to revise a salary payments workbook that isn't set up so well and I'm struggling with finding a good way to enter payments from an old sheet onto a new sheet. The values (for example) I want to appear on the new sheet are in range C2:AQ2 on the old sheet. Instead of going left-to-right, I want them to appear from top-to-bottom. The first formula I wrote was just a simple:
View 5 Replies
View Related
Jan 18, 2008
I'm trying to write a formula that will keep the Column ID static while allowing the Row ID to be reference. Each week my worksheet adds one line and the formula in question is moved one cell to the right and thus the formula cell makes the same move (1, -1). I need the formula to keep the column the same from week to week, while allowing the row to shift downward with the formula. I've attached a sample spreadsheet with the formula I derived. Check out the highlighted formula to familiarize yourself before running.
View 2 Replies
View Related
Jan 9, 2014
I'm using a macro to paste a formulae into a destination cell on another worksheet.
The problem is that I need the Macro to put the name of the active sheet into the formulae
VB:
Sheets("Front").Select
Range("E1").Select
Selection.End(xlDown).Select
Range("E3").Select
ActiveCell.Formula=INDIRECT(ADDRESS(MATCH(9E+99+306,*****ActiveSheet.Name*****!F:F,1),6,4))
The macro has to work whis way becuse I will be using it with multiple worksheets, all with different names.
View 9 Replies
View Related
Jul 1, 2013
I have a formula in a cell which is refered to other cell within the same sheet and also to other sheet from other file. say
C1 = A1+B1+data file c1 Data file is another file in other location.
I was trying to break a external reference link (from Data File) from Data _ Edit Link, but it is converting all the formula to value. How is it possible to break only the external link without damaging the formula within the sheet say c1 = A1+B1+26 (value from data file c1)
View 5 Replies
View Related
May 21, 2014
Attached I have a document where I am wanting all of the individual sheet names on the Total page. Rather than having to change each formula to match the sheet name I believe there is a way to reference the sheet name column (AO) in the formula so you can drag it down to fill in the columns. I am basic with Excel and do not know how to add this indirect function into my current formulas.
View 5 Replies
View Related
Apr 29, 2014
I have an excel workbook that has many spreadsheets (each one sheet has a client name)I have another excel workbook that has these client names on one sheet (on a list) and next to every name I have a number (i.e total turnover of the year).
In the first workbook (where every client has his sheet (tab named after the client) I want to have a cell that equals to the sum of some cells on the other workbook, that refer to the specific client
(it looks like this ='[comissions NF 10-14.xls]comissions 14(auto)'!$J$81+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$197+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$313+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$429)
I want this sum to be added to every sheet of this workbook. each sheet refers to a client, so $J$81, $J$197 etc must be changed for the correct cell that refers to the name of the client. The tab names are alphabetical and so s the list.
Is there any way to do it, without re-entering the formula to each one?
View 1 Replies
View Related
Jan 5, 2009
Easy scroll to down ways, should I copy rows to a column? See the attachment for a more clearance.
View 4 Replies
View Related
Aug 7, 2013
I have a array as
01-12-2008 pump-1 25
01-12-2008 pump-2 28
02-12-2008 pump-1 24
03-12-2008 pump-1 26
03-12-2008 pump-2 38
03-12-2008 pump-3 35
I need sum value as
03-12-2008 pump-1 75(=26+24+25)
02-12-2008 pump-2 if no answer blank
03-12-2008 pump-2 66(=38+28)
View 9 Replies
View Related
Dec 3, 2007
COPYING indirect formula. When I copy, the lookup reference does not change. My formula is =INDIRECT("'"&$A247&"'!j106"). When I copy horizontally across cells, I want J106 to increase, ie j107, j108 etc. At the moment it remains at J106 and i have to manually increase the numbers by 1.
How do I change my formula so that the numbers increase automatically?
View 6 Replies
View Related
Feb 7, 2008
In Sheet1,
C14 = Sheet2!D2
C15 = Sheet2!D3
C16 = Sheet2!D5
What i want to do is to change "D" to "E". Next time i run it, it will change from "E" to "G".
I want a macro to do it, so that I don't have to change it manually one by one. For some reason, when i try to use .formulaR1C1, the reference change, and I couldn't get it to work.
View 5 Replies
View Related
May 22, 2014
I'm dealing with forecasting invoices. The main column 'BALANCE' has a formula referencing the previous cell and then adding or subtracting invoices (ENTRY). The problem I have is that I'll put values in ENTRY that I expect to come in at some point but as they arrive I need to change the order of the cells. So I'm constantly changing the order and then it changes the formula in BALANCE. I tried absolute cells (and even found a work around way to flow absolute cells by flowing then viewing formulas then using the replace function but that didn't work.
So my formula in BALANCE is:
=$I$173+$E$174-$G$174
but if I move G174 to another cell I'd like to keep the BALANCE formula to stay G174 instead of following the move.
View 2 Replies
View Related
Jun 17, 2009
i have the table of holiday days with 7 columns(7 countries).Each column consists of 10(or more rows (holiday days).
I have a formula for calculating start day for a deposit which has to be renewed.
formula is =workdays(end date of deposit,-2,A1:A10).
-2 in formula is because all the trades in the market are traded Today+2days.
A1:A10 is column of holiday days.
This formula calculates the start of deposit excluding weekends,holiday days.
BUT I have more then 7 countries and I would like to have a macro so when in cell F10 I type SWEDEN,my formula automatically use the column with holiday days B1:B10 for sweden.
When I type Finland, the formula uses column C1:C10 with holiday days from Finland respectively.
View 6 Replies
View Related
Feb 8, 2010
need to do to the below code so that when i drag the formula down it changes the sheet number....sheet1, sheet2, sheet3 and so on but keeps the cell reference the same?
View 4 Replies
View Related
