I am trying to put together some code to have Excel to copy all the text files from a folder with numerous text files, all of which have identical formatting, to one worksheet. Furthermore, I need the copying event to occur every time the workbook is opened so that it will "refresh/overwrite" the worksheet with all of the files in the folder.
I have lifted some code from several sites which would seem to an untrained eye to accomplish what I am trying to get done, however I run into a file path error.
This is probably far easier then I am making it but I need to take the information that is in a textbox created through the control toolbox and copy and paste that information into a cell on different tab in the workbook. I have tried the infamous google and haven't been able to find much. The excel books that I have don't really touch on the control toolbox functions.
Hi all, first up I'm a total novice but I'm trying to populate a worksheet from a text file, but here's the kicker, I'd need specific lines of the text file to populate specific columns.
None of the text files will contain the same data, but, they will all have the same related data on the same lines. So I'd like to see:
.txt file 1 line 1 > Worksheet A:1 .txt file 1 line 6 > Worksheet B:1 .txt file 1 line 12 > Worksheet C:1
.txt file 2 Line 1 > Worksheet A:2 .txt file 2 Line 6 > Worksheet B:2
etc.
Everything needs to go into the same worksheet. Some .txt files won't have any data in the specified lines so skipped if blank, or just blank data copied.
I need to run through about 1300 .txt files in a directory in this fashion, can it be done?
I am looking for the VBA code to copy worksheets (with formatting) and save to a specific folder. The steps I am need to follow are:
Create a copy of the first worksheet Save it to a specified folder and name it with the worksheet name Repeat with all worksheets until the end of the workbook
I am trying to convert multiple tab-separated text files into one worksheet. All the text files have the same format and file structure. I have been copying and pasting these files into an Excel spreadsheet but this is time consuming. I need to find out if anyone has any ideas on how to accomplish this task using a VBA macro.
I receive a daily bath of 6 files (for now lets calls them 1.csv, 2.csv 3.csv etc...)
I have to manually open these select all the data and then paste them into a single worksheet in a different xls file (called master.xls).
I am trying to figure out some vba that will open each .csv file, copy the data and append to the end of worksheet 1 in master.xls. Ideally i would also like it to paste the name of the .csv it has copied the data to in column A of master.xls
Also, the .csv files will not always contain data, occasionally some will be blank.
Both .csv and master.xls will be stored in the same folder.
I have two macros one of which imports the data and the other processes the data. These macros were created at different times and need to be joined into a single macro that will combine their operations – with slight modification to the importing macro. Let me describe what each of the macros does:
PROCESS macro: Cycles through the CONTROL CELL on the “1” tab using the VALUES TO TEST. For each value to test it copies the values form the output tabs and pastes them into the A+B tab. Then it removes the duplicate rows there.
Option Explicit '====================================== Sub PROCESS() 'This subroutine is called when clicking on the first button Dim i As Long, j As Long, k As Long 'Those are the variables that will browse through the whole sheets Dim l As Integer 'this will be used to browse through the values to test Dim TheSearch(1 To 2) As Object 'This is an array of objects that will be used for the search Dim TheRange As Range 'This will be used to flag the range of duplicates in the output
'Searching for the Text string 'VALUES To TEST' in the sheet "1" in order to know where the array of values to be tested start Set TheSearch(1) = Range(Cells(1, 1), Cells(ActiveSheet.UsedRange.Rows.Count + 10, ActiveSheet.UsedRange.Columns.Count)).Find(What:="VALUES TO TEST", LookIn:=xlValues, Lookat:=xlWhole)
Need macro to search xls files in folder/directory for common text string "see reference" and then output the file number which is located in cell A1 to new spreadsheet for each file the text "see reference" is found.
I have created an Profit&Loss excel sheet with all the accounts in column A and then the values for each month, January to December in column B to column K like this:
Column A...............Col B............Col C........Col D........Col E.....and so on Account 1..............2222............58452........5255.........5844.... Account2................5.................45...............25...........458 ....
I've made a macro that creates a textfile and saves it on my desktop, but I get a text file with all the info in the same file, what I want is to get one text file for every month, that is text file number one(january) is: The heading info+column A+columnB
text file number two(February) is: The heading info+column A+columnC text file number three(March) is: The heading info+column A+columnD and so on
In the heading info I have to state the period and then I need the macro to change this for every text file, that is for the january file it has to be "1 to 1", for february "2 to 2" and so on. As it is now it will always say "1 to 1" because that is the values I have entered.
Sub btnSkapaFil_Klicka() Dim strAnv As String Dim strBeloppJan As String Dim strBeloppFeb As String Dim strBeloppMars As String Dim strBeloppApr As String Dim strBeloppMaj As String Dim strBeloppJun As String Dim strBeloppJul As String Dim strBeloppAug As String Dim strBeloppSept As String Dim strBeloppOkt As String Dim strBeloppNov As String Dim strBeloppDec As String Dim strSavepath As String Dim intRad As Integer Dim intStartrad As Integer Dim intSlutrad As Integer Dim fs, a strOrder = Range("I2")...............
I did a search for " import text" and found some promising leads, but not exactly what I was looking for. I have tried running macros and looking at the code but don't know how to pass the file names from the the D47:D147 range to VBA(see below). I saw elsewhere that Excel can be told to create a temporary batch file, and that the batch file with the command "copy text1.txt+text2.txt+text3.txt all.txt" for example could be used to merge the 3 text files into a file called all.txt. I don't however know how specify the path where copy starts, to tell the batch file to look in subdirectories or to pass the file into Excel. I've posted this question yesterday to Yahoo Answers http://tinyurl.com/omers and http://tinyurl.com/rfww9 without much luck.
Below is the macro I would like:I have text files whose names are found in the range D47:D147 although without the appended ".txt" extension. The sheets can only contain one name sometimes, but on average 8 to 10, so in the average case only cells D47:D56 would have entries.The text files are found in the say H:Textfiles directory or subdirectories.I would like Excel to find these files, concatenate them with a row between each file, and paste the results into cell K251.Finally, the text import wizard should be used with a space as a delimiter and the last 3 columns (it's sometimes only 2) of the concatenated file, not imported.
i am trying to make a VBA that will find a certain value (BELCS), select the value, and copy it to another worksheet. this is what i have so far:
For Each BELCS In ActiveSheet. Range("B2:B" & ActiveSheet.Range("B51161").End(xlUp).Row) If BELCS.Value = "BELCS" Then BELCS.Select Selection.Copy Sheets("BELCS").Select ActiveSheet.Paste End If Next BELCS
i am trying to get it to select the whole row when it finds that value but when it runs it says that i can't make a selection of the BELCS,
I have two workbooks: Workbook1 has two sheets – Cash Register and Suppliers; and Workbook2 has one sheet – Clients. The users of Workbook2 do not have access to Workbook1, and information entered in Workbook2 is required (and has to be manually re-entered) in Workbook1.
I tried IFs and VLOOKUPs to pull the data, but due to the large number of cells, the workbook is awfully slow – taking a very long time to save (even with Automatic Calculation/Recalculate before save turned off).
I am using Excel 2007.
This is what I am trying to achieve:
When a user enters an ID number, which begins with either “S” (e.g., SB-00010) or “P” (e.g., PADA-012-034-0567), in column E of Cash Register:
(1)
If that ID number begins with “S”, I want the code to look up that ID number in column A of Suppliers and copy the corresponding cell from each of the following columns:
I am trying to copy worksheet between 1 workbook to another. But even the worksheet was successfully copied but the code inside wasn't. Do I need to copy the VBA module manually (create new proc/sub) ? Or there is a setting during Worksheet copy process?
I am looking for VBA code that will select a data validation cell, copy the selection, and paste the value of that cell in a different worksheet.
The data validation list is in cell L47. The user will select a date from cell D31, type a description of activities in the adjacent column and then select initials from the aforementioned validation list in cell L47. I need the code to fit into a button I created so that when they click it to approve the activity, the code will copy the value of the initials and paste it into column AB in a separate worksheet. Column AB runs parallel to column A, which contains all of the dates located on Sheet1 in cell D31. I think I might need some sort of loop to run this so that it pastes initials on the correct date.
I am revamping someones Monthly Stat sheet for them. I am hoping to get a code that will copy the most current sheet which will always be the last one of the Workbook. I then would like the user to be Prompted to rename the sheet (Unless it can automatically generate the name which would be the next month). For example the sheet I need to copy is currently "January 2008" AND THE new sheet should be titled February 2008. At the end of February they need to run the code again and the sheet will of course be named March 2008 and so on...
The other thing I need to do is after the sheet is named:
1) I need the sheet named placed in cell A1 of the NEW sheet
2) I need to copy the VALUES in E9 to O9 and Paste them into E5 to 05 of the Newly created sheet
What VBA code will copy column A in Sheet 1 to column B in Sheet 3? The range of column A to be copied begins in row 2 and varies in length. Column A ends right before the last nonblank cell.
2.xlsm is open. it contains a sheet called Report_P New_report.xlsx is open and has 9 existing sheets
Every time this tries to execute I get a "Run time error 1004 Copy Method of Worksheet Failed".
What is wrong with this code? I have an identical line in another macro, the only difference is that there are 5 sheets pre-existing, and that works fine.
I'm using the following code to import thousands of html files into my spreadsheet. The code is working fine. Since I am importing thousands of files, when there is no more space on my worksheet, the code stops with an error message. I want to make this code add another worksheet & continue importing the html files until there are no more files to import.
Sub Master_Importer() Dim I As Long Dim strFilename As String Dim strPath As String strPath = "file:///C:/Documents and Settings/c/Desktop/New Folder/" With Application.FileSearch .LookIn = "C:Documents and SettingscDesktopNew Folder" .FileType = msoFileTypeAllFiles .Execute For I = 1 To .FoundFiles.Count strFilename = Mid(.FoundFiles(I), InStrRev(.FoundFiles(I), "") + 1) With ActiveSheet.QueryTables.Add(Connection:= _ "URL;" & strPath & strFilename _ .......................
I need to copy my worskheet multiple times to create about 10 of the same worksheets within a workbook. I know if you click in the very most top left hand corner of the worksheet, then click copy, go to the new worksheet and click paste, it copies the whole page, but it does not copy over the VBA Code.
Also, for some reason, it does copy over my macro buttons, but does not put some of them in the right spot?
I am using the following code to copy the contents of a DDE feed.
Code: Private Sub Worksheet_Calculate() Worksheets("Sheet2").Range("A1").EntireRow.Insert Shift:=xlDown Worksheets("Sheet1").Range("A3:F3").Copy Worksheets("Sheet2").Range("A1:F1").PasteSpecial Paste:=xlPasteValues Application.CutCopyMode = False End Sub
What I want to do is only copy the row when the columns contain data, as it stands at the moment it's copying blank rows to sheet 2. Is there a way that I can do this?
writing a code where i can copy a worksheet (Sheet1), insert a new worksheet at the END (as the last worksheet), and paste to that new worksheet (which will have a different name each time a new one is added). I am using the code below, but it adds a worksheet after Sheet1 instead of at the end, and it also adds another weird worksheet that says "Dim Worksheet" in one cell, and "Set newsheet = Sheets.Add(After:=Sheets(Worksheets.Count), Count:=1, Type:=xlWorksheet)" in another. This is not in the VBA window, it is just text in a cell in another inserted worksheet. I only want one worksheet added at the end that I can paste too (knowing that the inserted sheets will always have new names).
Code: Sub CreatePercentageSheet() ActiveWorkbook.Sheets("Sheet1").Copy _ After:=ActiveWorkbook.Sheets("Sheet1") ActiveWorkbook.Sheets.Add After:=Worksheets(Worksheets.Count) ActiveSheet.Paste End Sub
I have a worksheet containing code to hide itself when the sheet is deselected:
Private Sub Worksheet_DeActivate() Sheet16.Visible = xlSheetVeryHidden End Sub
After unhiding this sheet and modifying it, I copy it. This new copy becomes the 'production' copy, and the self-hiding sheet is blanked, leaving me with a hidden blank template and a new sheet. However, the self-hiding code is copied along into the new sheet. I'm looking for a way to delete the sheet code from the copy. The best I've found is how to remove a module from the workbook.
Sub New_Sheet() ActiveSheet.Copy After:=Sheets(1) ActiveSheet.Name = Range(" F8").Value Sheet16.Visible = True Sheet16.Select Range("B13:F22").ClearContents Sheets(2).Select ActiveSheet.Shapes("Button 1").Delete Range("A8").Select ActiveSheet.PageSetup.PrintArea = Range("A1:R35").Address Call Sort_Sheets End Sub
I have been working on this application for the past couple weeks and I have this module of code that copy's a worksheet into a new workbook and changes everything into values. However I have added buttons onto this sheet and after running the code again it froze the program, in which I had to manually end. It gave an error afterwards however I don't remember what it said. Now everything I try to run or step through it, nothing happens. And I have turned Events and ScreenUpdating on.
I would also like to note that it won't allow me to perform actions like unhide sheets or unprotect them. The code has not been changed either so what has happened to disable all functionality.
I have been working on this application for the past couple weeks and I have this module of code that copy's a worksheet into a new workbook and changes everything into values. However I have added buttons onto this sheet and after running the code again it froze the program, in which I had to manually end. It gave an error afterwards however I don't remember what it said. Now everything I try to run or step through it, nothing happens. I have turned Events and ScreenUpdating on.
