So I have an option on my userform that the user input selected.
I need the data once written to the worksheet [Master] to move based on cell AD [Customer Divert / TBP Divert / Failed Delivery]
Example: Row 12 has Customer Divert in cell AD I need to keep a copy on the master sheet but also copy the entire row to the customer divert sheet.
Need code and here to input in the Code sheet?
I need to copy my worskheet multiple times to create about 10 of the same worksheets within a workbook. I know if you click in the very most top left hand corner of the worksheet, then click copy, go to the new worksheet and click paste, it copies the whole page, but it does not copy over the VBA Code.
Also, for some reason, it does copy over my macro buttons, but does not put some of them in the right spot?
I have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories:
Requirement: 10358
Title: Customer requirement 1
Text: This describes the requirements for a product for the customer[code].....
The text of the categories may begin in column A or B
What I need is a macro that will search each worksheet for a category, e.g., "Configuration:", copy the row where the keyword "Configuration" is found, and then have that row transposed and pasted to another WorkSheet (e.g., "Extracted Data") cell.
Data extracted from the next Worksheet would begin a new row in "Extracted Data"
Example:
Requirement1 Title Text Verification Method-Level ...
Requirement2 Title Text Verification Method-Level ...
Requirement3 Title Text Verification Method-Level ...
The Requirement# is best extracted from the WorkSheet tab since some of the worksheets are missing this information.
I can provide an example spreadsheet, however, I was not able to figure out how do that in this post.
I found a thread similar to this problem:
find and copy row
However, it only finds, copies and pastes for one keyword.
I am looking for a solution to an otherwise very tedious problem.
I have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories: ...
I have a worksheet (will be the last worksheet) that I want to use as a template for further worksheets.
I want the user to be able to run a macro (?) and copy the entire worksheet and then insert it to the right of all the worksheets as many times as needed.
I've a worksheet where I maintain the IT tickets that I handle. Whenever, the I column is updated with Implemented/Closed, the entire row should be copied to a new worksheet.
I've tried with other VBA scripts provided, but was not success with the same.
I'm trying to develop code that will perform the function in the title. I want to use an if statement that looks at cells across the worksheet and where it finds certain text it should colour the entire row. I would also like to be able to input the text via a user box. I don't necessarily want the code
View 3 Replies View RelatedI want to run a macro that looks thru column F of all my worksheets (in my entire workbook).
If it finds an x then I want it to copy that entire row and paste it into a worksheet called "old" or a new worksheet or a new document in word (it doesn't matter - just whatever is easiest for my little brain to understand).
I should end up with about 40 rows of data in the new sheet.
(I have some code that looks thru it all and colors the cell blue but I just don't know how to get it to copy and paste the entire row into a new worksheet.)
way to copy the entire row of data from one worksheet into another, within the same workbook, based on the criteria "Responsible." Here is a sample of the data: ..
View 9 Replies View RelatedI need to make several exact duplicates of an existing worksheet which includes several form controls. Basic Copy/ Paste the worksheet works well but row heights are different and hidden rows are unhidden. Is there a way to make an EXACT duplicate ?
View 2 Replies View RelatedI have an Excel database of department contracts with a Master worksheet. I have created a worksheet tab for each of the departments. Column G has a dropdown list for each department. When I enter a new contract onto the Master I want it to auto copy to the coordinating worksheet based on the selected department.
If possible I would also like it to enter the newest contract would enter into the coordinating Contract Party entered into column D. (ie... If Hospital A is entered in column D on master, the new entry on the worksheet being copied to will be entered under the last Hospital A, if Hospital B is entered on Master it copies under Hospital B). If this isn't possible then I am not too worried about that part.
I have attached a blank version of the file. Current Master 5-15-14.xlsx‎
I want to catch an error and reset the entire code to the very beginning and skip that entire entry. When I use "Next fieldSheetName" I get "Next without For," error 1004. Searches tell me I have an open block somewhere, but that's not true. Removing that statement (and having the loop iterate as normal) has no error at all.
Dim employeeName As String
Dim fieldMax, x, y As Byte ' Counters mostly
Dim workedHours, fieldSheetName As Integer
fieldMax = 204 ' Row number to stop on in the field time sheet
row = 4 ' Row specification for field time sheet. Begin at row 4 to ignore headers
' and start on the first name. This should not be changed!
Col = 3 ' Start at column 3 then increase by one to start going to next time entry
' RESET HERE!
For fieldSheetName = 4 To fieldMax Step 8 ' This is our MAIN loop. It iterates from 0 to fieldMax, which is 204...........
I am using the code below in Excel 2013.
Sub Test()
For Each Cell In Sheets(1).Range("J:J")
If Cell.Value = "131125" Then
[Code]....
This works great except that it pastes formulas. I would like to paste values only. I've tried
" PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False" and it gives me an error.
i am trying to make a VBA that will find a certain value (BELCS), select the value, and copy it to another worksheet. this is what i have so far:
For Each BELCS In ActiveSheet. Range("B2:B" & ActiveSheet.Range("B51161").End(xlUp).Row)
If BELCS.Value = "BELCS" Then
BELCS.Select
Selection.Copy
Sheets("BELCS").Select
ActiveSheet.Paste
End If
Next BELCS
i am trying to get it to select the whole row when it finds that value but when it runs it says that i can't make a selection of the BELCS,
I have two workbooks: Workbook1 has two sheets – Cash Register and Suppliers; and Workbook2 has one sheet – Clients. The users of Workbook2 do not have access to Workbook1, and information entered in Workbook2 is required (and has to be manually re-entered) in Workbook1.
I tried IFs and VLOOKUPs to pull the data, but due to the large number of cells, the workbook is awfully slow – taking a very long time to save (even with Automatic Calculation/Recalculate before save turned off).
I am using Excel 2007.
This is what I am trying to achieve:
When a user enters an ID number, which begins with either “S” (e.g., SB-00010) or “P” (e.g., PADA-012-034-0567), in column E of Cash Register:
(1)
If that ID number begins with “S”, I want the code to look up that ID number in column A of Suppliers and copy the corresponding cell from each of the following columns:
B
C
D
E
F
G...........
I am trying to copy worksheet between 1 workbook to another. But even the worksheet was successfully copied but the code inside wasn't. Do I need to copy the VBA module manually (create new proc/sub) ? Or there is a setting during Worksheet copy process?
View 4 Replies View RelatedI am looking for VBA code that will select a data validation cell, copy the selection, and paste the value of that cell in a different worksheet.
The data validation list is in cell L47. The user will select a date from cell D31, type a description of activities in the adjacent column and then select initials from the aforementioned validation list in cell L47. I need the code to fit into a button I created so that when they click it to approve the activity, the code will copy the value of the initials and paste it into column AB in a separate worksheet. Column AB runs parallel to column A, which contains all of the dates located on Sheet1 in cell D31. I think I might need some sort of loop to run this so that it pastes initials on the correct date.
I am revamping someones Monthly Stat sheet for them. I am hoping to get a code that will copy the most current sheet which will always be the last one of the Workbook. I then would like the user to be Prompted to rename the sheet (Unless it can automatically generate the name which would be the next month). For example the sheet I need to copy is currently "January 2008" AND THE new sheet should be titled February 2008. At the end of February they need to run the code again and the sheet will of course be named March 2008 and so on...
The other thing I need to do is after the sheet is named:
1) I need the sheet named placed in cell A1 of the NEW sheet
2) I need to copy the VALUES in E9 to O9 and Paste them into E5 to 05 of the Newly created sheet
I am trying to find a code that will copy a Range (MasterMinutes) from one Worksheet and then paste it on another worksheet titled "Master"
After it has been pasted I need to select the used area (EXCEPT for the first row) on the Master and Sort it by Columns B C and D (all ascending)
What VBA code will copy column A in Sheet 1 to column B in Sheet 3? The range of column A to be copied begins in row 2 and varies in length. Column A ends right before the last nonblank cell.
View 4 Replies View RelatedHere is the code I have:
Windows("2.xlsm").Activate
Sheets("Report_P").Select
Sheets("Report_P").Copy After:=Workbooks("New_report.xlsx").Sheets(9)
2.xlsm is open. it contains a sheet called Report_P New_report.xlsx is open and has 9 existing sheets
Every time this tries to execute I get a "Run time error 1004 Copy Method of Worksheet Failed".
What is wrong with this code? I have an identical line in another macro, the only difference is that there are 5 sheets pre-existing, and that works fine.
I am trying to put together some code to have Excel to copy all the text files from a folder with numerous text files, all of which have identical formatting, to one worksheet. Furthermore, I need the copying event to occur every time the workbook is opened so that it will "refresh/overwrite" the worksheet with all of the files in the folder.
I have lifted some code from several sites which would seem to an untrained eye to accomplish what I am trying to get done, however I run into a file path error.
i have a workbook with over 600 worksheets and any vba code to do the following.... (each worksheet contains different number of lines)
At the moment the data is in columns a to d
What i need is the data currently in cell a1 (in each worksheet) to appear beside every line in that worksheet
Then i need to take all this data and put it onto one single worksheet .
I am using the following code to copy the contents of a DDE feed.
Code:
Private Sub Worksheet_Calculate()
Worksheets("Sheet2").Range("A1").EntireRow.Insert Shift:=xlDown
Worksheets("Sheet1").Range("A3:F3").Copy
Worksheets("Sheet2").Range("A1:F1").PasteSpecial Paste:=xlPasteValues
Application.CutCopyMode = False
End Sub
What I want to do is only copy the row when the columns contain data, as it stands at the moment it's copying blank rows to sheet 2. Is there a way that I can do this?
writing a code where i can copy a worksheet (Sheet1), insert a new worksheet at the END (as the last worksheet), and paste to that new worksheet (which will have a different name each time a new one is added). I am using the code below, but it adds a worksheet after Sheet1 instead of at the end, and it also adds another weird worksheet that says "Dim Worksheet" in one cell, and "Set newsheet = Sheets.Add(After:=Sheets(Worksheets.Count), Count:=1, Type:=xlWorksheet)" in another. This is not in the VBA window, it is just text in a cell in another inserted worksheet. I only want one worksheet added at the end that I can paste too (knowing that the inserted sheets will always have new names).
Code:
Sub CreatePercentageSheet()
ActiveWorkbook.Sheets("Sheet1").Copy _
After:=ActiveWorkbook.Sheets("Sheet1")
ActiveWorkbook.Sheets.Add After:=Worksheets(Worksheets.Count)
ActiveSheet.Paste
End Sub
I need a macro that will search data from a range of cells in one column for multiple criterias and them copy the entire rows to a new worksheet.
Example I have a list of group names
Network
Telcom
Help Desk
BA
Network
I only want to choose all Network and Telcom rows copy to another worksheet.
I have a worksheet containing code to hide itself when the sheet is deselected:
Private Sub Worksheet_DeActivate()
Sheet16.Visible = xlSheetVeryHidden
End Sub
After unhiding this sheet and modifying it, I copy it. This new copy becomes the 'production' copy, and the self-hiding sheet is blanked, leaving me with a hidden blank template and a new sheet. However, the self-hiding code is copied along into the new sheet. I'm looking for a way to delete the sheet code from the copy. The best I've found is how to remove a module from the workbook.
Sub New_Sheet()
ActiveSheet.Copy After:=Sheets(1)
ActiveSheet.Name = Range(" F8").Value
Sheet16.Visible = True
Sheet16.Select
Range("B13:F22").ClearContents
Sheets(2).Select
ActiveSheet.Shapes("Button 1").Delete
Range("A8").Select
ActiveSheet.PageSetup.PrintArea = Range("A1:R35").Address
Call Sort_Sheets
End Sub
I have been working on this application for the past couple weeks and I have this module of code that copy's a worksheet into a new workbook and changes everything into values. However I have added buttons onto this sheet and after running the code again it froze the program, in which I had to manually end. It gave an error afterwards however I don't remember what it said. Now everything I try to run or step through it, nothing happens. And I have turned Events and ScreenUpdating on.
I would also like to note that it won't allow me to perform actions like unhide sheets or unprotect them. The code has not been changed either so what has happened to disable all functionality.
[URL] .....
This is probably far easier then I am making it but I need to take the information that is in a textbox created through the control toolbox and copy and paste that information into a cell on different tab in the workbook. I have tried the infamous google and haven't been able to find much. The excel books that I have don't really touch on the control toolbox functions.
View 2 Replies View RelatedI have been working on this application for the past couple weeks and I have this module of code that copy's a worksheet into a new workbook and changes everything into values. However I have added buttons onto this sheet and after running the code again it froze the program, in which I had to manually end. It gave an error afterwards however I don't remember what it said. Now everything I try to run or step through it, nothing happens. I have turned Events and ScreenUpdating on.
View 2 Replies View Related
