Add New Worksheet & Copy Range To It

Sep 30, 2007

The purpose of my following code is as below:

1. Add new worksheet (say ws2)
2. Activate the worksheet ws2
3. Copy a predefined range from already open workbook (say ws1)
4. Select the target cell in ws2 through user prompt by using mouse or keyboard
5. Paste the copied range from ws1 at this location of ws2

I am facing problem in selecting the cell in ws2 as ws1 always remain in foreground.

Sub CreateNewWorkBook(RValue As String)
Dim wbA As Workbook
Dim wbB As Workbook
Dim sTemp As String
Dim rRange As Range
Set wbA = ThisWorkbook
wsName = ActiveSheet.Name
Set wbB = Workbooks.Add
WorkBookName1 = wbA.Name
WorkBookName2 = wbB.Name......................

View 5 Replies


ADVERTISEMENT

Copy Range To New Worksheet

Jun 2, 2014

Ok then, I can do this with record macro and it works ok, but im sure theres a nice way to get VBA to do this quicker and make it work for every row.

Story is - I have a spreadhset - which will have data in rows as normal. Each row when completed will have a button which when clicked - creates a new worksheet by copying one already there, then populates this new worksheet with the data from the first worksheet.

Dont ask why I am not allowed to use MS Access for this as its a bit of a long story.

This is what the record macro VBA shows - this works ok as I said but obviously takes a good few seconds and jumps around etc until its competed.

Code:
Sub create()
'
' create Macro

[Code]...

View 4 Replies View Related

Copy Range To New Worksheet Consequentially

Sep 8, 2013

I would like a Macro that can copy values from 5 rows in a worksheet, starting from Row 1. Each "Batch" copied to a new worksheet should contain values from 5 rows, so first batch would be from Row 1 - Row 5 → copied to Sheet 1 , then Row 6 - Row 10 → copied to Sheet 2 , then Row 11 - Row 15 → copied to Sheet 3 ...... etc. This should be done until there are no values in the last row.

So, the workbook would start off with only one worksheet, which could be named "source" for convenience and end up with many more sheets depending on how many rows are in the source worksheet, which can vary from time to time. There are 3 other "contraints/conditions that need to be considered 1. the number of columns in the "source worksheet may vary from 5 columns up to 30 columns. 2. The formatting that was applied to the values in the "source" worksheet need to be maintained. 3. The data posted should start in cell A1 for each new sheet.

View 2 Replies View Related

VBA - Loop To Copy Range To Different Worksheet

Mar 15, 2014

Creating a worksheet to consolidate his financial data. I've been able to muck my way through most of the VBA code by looking at examples on the forum. However, I cannot figure out how to add the last loop or where to place it. I can copy the values from the P&L sheet to the DATA sheet but I cannot discover a way to also pull the values from the BalSht sheet to the Data sheet. I think the BalSht loop will be almost identical to the "P&L sheet loop, and be placed just below it - but I'm not successful in multiple attempts and days of trying. How can I accomplish this?

Here's the VBA code:

VB:

Sub NewISCopy()
On Error Goto errorHandler
'*************************************************************
Dim CopyCol As String
Dim PasteCol As String
CopyCol = "G"

[Code]...

Excel file attached.

FI-LOOP-5.xlsm

View 7 Replies View Related

Copy Only Colours To The Range On Other Worksheet

May 13, 2014

I have two worksheets. both are almost identical although one has the colour red background on certain cells in the range.

How do i copy only the colours to the range on the other worksheet only?

Both ranges are identical and dynamic in size. The structure of both spreadsheets are identical.

View 3 Replies View Related

Code To Copy A Range To Another Worksheet

Oct 9, 2008

I am trying to find a code that will copy a Range (MasterMinutes) from one Worksheet and then paste it on another worksheet titled "Master"

After it has been pasted I need to select the used area (EXCEPT for the first row) on the Master and Sort it by Columns B C and D (all ascending)

View 9 Replies View Related

Set A Range And Copy Contents To Another Worksheet

Jul 7, 2006

I have a workbook with lets say 10 sheets. 9 of the 10 sheets are identical as far as layout, they just hold different information for different employees. I need to get a range of cells that are NOT empty and copy that data to the 1 different sheet (summary page). A6 through A25 is where the data is going to be, but all those cells may not be filled up, so I want to drop the empty cells from the range. So If only A6-A15 are filled, then those are the only ones that get copied.
ALSO (dont you love that) I need to take that number range and have columns A, F and I as well. So if I have A6-A15, I will need the data out of F6-F15 as well.

View 4 Replies View Related

Copy Cells Between A Certain Range Into A New Worksheet

Apr 12, 2007

I had originally posted this question on another thread since the problem i've been trying to solve is quite similar to the discussion on that thread.

I have a workbook with only one worksheet. This worksheet contains data in only the first column. However this data can be either tab or space delimited. The first few rows are junk data which i am not concerned with. I have a header and footer row and the useful cells are in between these.

What I am trying to solve is this:

1) Add a new worksheet, rename it to "COPY" and place it after the original sheet. This I have been able to achieve using the code below.

Dim PageSheet, CopySheet As Worksheet

Set PageSheet = ActiveSheet
PageSheet.Activate
Sheets.Add
Set CopySheet = ActiveSheet
CopySheet.Name = "COPY"
CopySheet.Select
CopySheet.Move After:=PageSheet ...............

View 9 Replies View Related

Copy Range Of Cells From All Worksheets To One Worksheet?

Sep 5, 2013

Copy Ranges From all Sheets.xlsx

I need a macro that will copy a range of cells, it is always in the B2:B7 range from all the worksheets in a workbook. This is just a sample of the actual workbook, which has 100's of worksheets. The macro also needs to maintain any formatting [conditional or regular].that has been added to a particular cell. The ranges need to be pasted in a worksheet named "content" and arranged in columnar sequence, please see attached sample.

View 3 Replies View Related

VBA - Additional Loop To Copy Range To Different Worksheet

Mar 14, 2014

I'm attempting to create a worksheet to consolidate his financial data.

How to add the last loop or where to place it.

I can copy the values from the P&L sheet to the DATA sheet but I cannot discover a way to also pull the values from the BalSht sheet to the Data sheet.

I think the BalSht loop will be almost identical to the "P&L sheet loop, and be placed just below it - but I'm not successful in multiple attempts and days of trying.

How can I accomplish this? Here's the VBA code:

[Code] .....

View 3 Replies View Related

Copy Range Of Cells To Another Worksheet If Criteria Is Met?

Jan 9, 2014

Copy and paste each cell below when M is true or greater then 0 to a new worksheet called Price Summary. If cell is false or 0, do not copy. I would like the text in N to paste to the first available row in A and copy M as well to the corresponding B. I only need the values of these cells to copy and not the formulas. Been trying to get this to work for a while with no luck.

Excel 2007MN17$018$01920$021$022$023$024$025$026$027$028$029$030$031$032$033$034$0250# Vessel Pricing TESTWorksheet FormulasCellFormulaM17=IF(L17=TRUE,INDEX(_250lb12inlegs,B2),"$0")N17=IF(L17,"12 in.

[Code].....

View 3 Replies View Related

Search Range For Item And Copy To Another Worksheet

May 2, 2006

I wish to compare each item (4-8 digit alphanumeric ID) in a list in column B of worksheet 1 (Portfolio) to all of the items in column B of worksheet 3 (EssBase Cap). The data (ID) in column B of 'EssBase Cap'! is concatenated with its description so my code needs to strip off the leading zeros and everything after "-" in order to do the comparison. Once a match is found it should copy the corresponding values in 'EssBase Cap'! for that row, column D and E to 'Portfolio' Column J, and K. I have created some pseudo code and need to translate this to Excel VBA

Dim IBSPWD As String
Dim ProjectPCN As String
Dim Pos As Integer
Dim I As Integer
Dim J As Integer
For I = 3 To 'to end of range ? WHat is the code to find end of the range IE no more data?
For J = 6 'to end of range ? The nested for loop will check each item in Portfollio and compare it to each item in Essbase Cap
IBSPWD = 'EssBase Cap'!Cell(J,"B") 'fill in the string with data
Pos = InStr(1, IBSPWD, "-", vbTextCompare) 'find length of the string befor "-"...............................

View 3 Replies View Related

Copy Named Range Definitions From One Worksheet To Another

Mar 23, 2007

How can I copy the Named Range definitions from one worksheet to another in the same workbook? In case it matters, the Named Ranges refer to cells in a third worksheet in the same workbook.

View 6 Replies View Related

Copy Range Groups & Transpose To Another Worksheet

Oct 22, 2007

I have a workbook with data in it that I want to copy and put in another wookbook. The data looks like this.

D11/22'2005
CX
T-7.80
PEl Azabache
LDining Out
(blank cell)
D11/22'2005
CX
T-9.50
PAce Hardware
LHousehold
(blank cell)

What I want is a macro to copy that data until it finds a blank cell and paste/transpose that data in another workbook and then get the next set of data until an other blank cell.

It should look like this when done.

D11/22'2005CXT-7.80PEl AzabacheLDining Out
D11/22'2005CXT-9.50PAce HardwareLHousehold

View 7 Replies View Related

Search Range On Each Worksheet & Copy Relevant Row

Feb 1, 2008

I have a multi worskheet document and i want to be able to create a macro that will search individual cells in a range on each sheet and if it locates a 3 letter mneumonic (STK in this case), it will then copy that data for the whole row and paste on an additional worksheet. I also need the data pasted on the new worksheet to be protected ie not overwritten when the macro runs again. So this mneumonic could exist anywhere in column A (A1,A500).

View 5 Replies View Related

Copy Range To Different Worksheet But Skip If Blank And Fill In Next Row

Feb 2, 2014

I have an excel file that contains a list of all clients and want to add an "Active Client" tab within the workbook. The list indicates some active, some inactive. The "Active client" column shows an x at 1st row or if "Inactive" is left blank. I want to auto populate all "Active Clients" to a different Worksheet without having blank rows or FALSE as the result of the current formula ...

=IF('Lead Data'!B17="√",'Lead Data'!H17)

View 1 Replies View Related

Copy Range From Multiple Worksheets To Another Worksheet Without Overwriting

Apr 25, 2014

I need a code that will copy any cells with data in range I3:I41 from sheet2 and paste it in sheet1 starting at cell B3. Then copy any cells with data in range I3:I41 from sheet3 and paste it in sheet1 starting at the next empty cell.

View 9 Replies View Related

Copy Paste Worksheet Range To Existing Workbook?

Jan 24, 2014

how do i go about creating a macro to copy a range in sheet 1 in workbook A and paste that to a new tab(the last one) in the existing workbook B. i would like the tab to be renamed based on a cell value. preferably workbook B doesnt have to be open, and the save and close it

View 6 Replies View Related

Copy Range Of Cells Based On Condition To Another Worksheet

Apr 17, 2008

"copy cell range based on conditions" and it didnt really get an answer. There was one that copied the info the next blank cell on that line, but im not smart enough yet to figure out how to copy it over. ( getting there though with lots of staring at code).

2 sheets. I have already created auto modules to fill in data and code,and sorted the columns so they are in line.

Sheet 1. Info : has 9 columns. So if column = 9 and the value = new.
Then i want to copy the range on the columns (A:G) and then paste it on the other sheet ( Card info) as long as Column A is empty ( as in next available blank cell) ( something like a DO while worksheet("Card info").column(A) <> ""

View 9 Replies View Related

Out Of Range - Copy Cell From Multiple Sheets In New Worksheet Column

Dec 14, 2012

Here's what I'm trying to do (improperly apparently!!):

Book1, ''Master'' is the sheet, I'm copying info into, and Company info are the sheets im getting info from each of my .xls files in a folder, ie cell C2. Just in case, to be clear, I have all my vba projects opened from each .xls book, and need to copy, from each .xls book, in Company info, cell C2 into Master column A:

Sub collate_cell_data()
Dim dest As Range, wbNew As Workbook, wb

Set wbNew = Workbooks.Add

[Code] .........

View 1 Replies View Related

Macro To Copy Shapes From Same Range From Multiple Worksheets To One Worksheet

Sep 14, 2008

I have one master worksheet named "Season" and 30 other worksheets named "1,2,3,4 and so on to 30". I ideally want to copy the shapes (msoShapeOval) from the worksheets- "1-30" to worksheet- "Season". When the shapes (msoShapeOval) are copied from worksheets "1-30"

I want them to keep thier position that they were in when copied to worksheet- "Season".

The shapes (msoShapeOval) are in range "A1:AZ43" in worksheets "1-30" and would be placed in worksheet "Season" range "A1:AZ43"

View 9 Replies View Related

Copy Named Range Data To Worksheet Based On Dropdown Or Combobox

Feb 10, 2013

I have a worksheet called "Lookup" with several dynamic named ranges (each is 1 column wide) including facility, department, shift, etc. On a summary worksheet in the same workbook I want users to use a dropdown or combo box (don't care what type) in cell B2 to select a facility and then based on their selection, copy the department named range data and paste it into the summary sheet beginning in cell A5 and paste the shift named range data into the summary sheet beginning in cell B5.

Example: user selects "AR Plant" from the dropdown or combo box and the data from the "AR_Rpt" named range is pasted into cell A5 and the "AR_Shift" named range is pasted into cell B5.

View 9 Replies View Related

Find All Ranges In Worksheet And Copy Actual Cell Range To A List?

Mar 14, 2013

I have 10 worksheets. I would like to create a macro to find all the "2" values on worksheet 1, and have the actual range that the cell is, compiled into a list -example: I would like the list to be similar to this= (A1,B15 ,C8)

I even tried to record it but it doesnt show me the actual range that the data is found in.

View 9 Replies View Related

Copy Between Worksheets Doesn't Work (look For A Certain Value In Worksheet A And Copy That Row Of Data To Worksheet B)

Apr 13, 2009

look for a certain value in worksheet A and copy that row of data to Worksheet B.

However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?

PHP Private Sub GetInfo_Click()
    Dim r As Long, LastRow As Long, Status As Integer
    Dim Message As String, Title As String, Default As String, MyValue As String
    Application.ScreenUpdating = False
    
    MyValue = Range("A4").Value
    Workbooks("invoice.xls").Worksheets("A").Activate
    LastRow = Range("C65536").End(xlUp).Row
    For r = LastRow To 1 Step -1
        If Cells(r, 1).Value = MyValue Then
            Rows(r).EntireRow.Copy
            Workbooks("invoice.xls").Worksheets("B").Activate
            Rows("8").Select
            Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
        :=False, Transpose:=False
            Status = 1
            Workbooks("invoice.xls").Worksheets("A").Activate
            Rows(r).EntireRow.Delete
            
            Exit For
        End If
    Next r
    Application.ScreenUpdating = True 

View 2 Replies View Related

Worksheet Copy: Method 'Copy' Of Object 'Worksheet' Failed

Nov 22, 2006

I have written code that allows a user to copy, via a button, a certain sheet any number of times. They can choose to copy that sheet 5 times and then 10 times, etc.

When the sheet tries to be copied for the 17th time, it fails with the following message: "Run-time error '1004':
Method 'Copy' of object '_Worksheet' failed"

Here is the code that I have. The second line is the line that is failing.

Worksheets("RoedForm").Select
Worksheets("RoedForm").Copy After:=Worksheets(iCount)

This always fails on the 17th copy regardless of how many different combinations of copy sheets the user tries. There are several sheets before the sheet that is to be copied and I have deleted several of those to see what happens and it still fails on the 17th copy. I also have 1GB of memory, so I don't believe that memory is an issue.

View 3 Replies View Related

Copy Worksheet In Workbook With All Formulas On New Worksheet Referencing Previous Worksheet

Apr 21, 2012

I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.

How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?

View 1 Replies View Related

Copy Data In Non-blank Cells Within Range And Paste Into Cells On Another Worksheet

Jan 19, 2012

I have data in some of the cells within range A26:A39

These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?

I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.

I anticipate that there will be 4 non blank cells within this range.

Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43

View 5 Replies View Related

Copy Data With Criteria For Worksheet And Data Range

Oct 17, 2012

I have a workbook with 3 sheets

Sheet1 - TeamList - Column A is a list of all the team leaders which is used to create a new worksheet for every team. Col B is blank. Column C, D, E are the team lists where teams can consist of anywhere from 10-25 employees.

For example
Column A
Column B
Column C
Column D
Column E

Team Leaders

Team Leader
Employee
Pin

TL 1

TL 1
Emp 1
10001

[Code] ......

Sheet2 "RawHours" A raw data sheet that contains employee hours information

For Example
Employee #
PIN
NAME
Reg
OT
TRN
Stat
Sick
Vac
Berv

2000100
10001
Emp 1
24.00
0.00

[Code] .......

Sheet3 - Template

Basically what I want to be able to do is create a sheet for every team leader and copy and paste there team into the appropriate sheet.

I have the sheet create done by simply copying the template and renaming each sheet using the Team Leaders list from column A from the TeamList sheet. And then I copy the page setup information using the template as well but when it comes to pulling over the appropriate team members in to the appropriate sheet I can not seem to wrap my head around it.

Below is the current code I am using:

Code:
Option Explicit
Sub CreateSheet()
Dim LR, i As Long
Dim shCount As Integer
Dim Sh As Worksheet
Dim Cell As Range
Dim CpySht As PageSetup

[Code] ........

View 3 Replies View Related

Copy Cells And Range Of Cells To New Worksheet

Apr 22, 2009

I have an excel workbook that I have created to use in the creation of purchase orders. I have a spot for the vendor in cell D10 and my items are in the range of B17 to N17.

What I would like to have is a macro that I can assign to a button that does the following.

I have a worksheet called "Purchase Order" that has all the information in it.

When you click on a button named "Process", it will take everything entered into B17 - N28 and copy it to a worksheet named "PO# History" starting in cell B2 and moving down. Each time I click on "Process" I need the information in the range above to get entered into the next empty line on the "PO# History" worksheet.

This way I can maintain a list of items purchased and then play with them in a pivot table/graph and such.

Also, What I need it to do also is when process is clicked, the macro needs to pull the vendor name from cell D10 and put it in column A on "PO# History" for each row it adds from B17-N28.

View 9 Replies View Related

Search Keyword In Worksheet / Copy And Paste Adjacent Cells To New Worksheet

Sep 24, 2012

I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.

[URL] ......

I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.

I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file

Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).

I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved