1st Quarter Goal23306.67%
2nd Quarter Goal00.00%
3rd Quarter Goal00.00%
4th Quarter Goal00.00%
The 306% cell has (B2+B3+B4)/7.5 in it to get that value. I need to dump any access percentage above 100% into the next quarters goal. so 2nd should be 100 and 3rd should be 100 and 4th should be 6.67.
I just have a grid with a bunch of numbers listed and they all have one extra space at the end of the number. I have another tab with the same numbers but they do not have that extra space. I am using a vlookup formula and it is not recognizing the numbers because of the extra space. Is there some way to get rid of the extra space with a formula instead of going through job by job?
View 5 Replies View RelatedI have some excel files that contain data when I'VE finished entering data >> I saved it when I open the file >>> I FIND THE DATA INTACT .. NO PROBLEM BUT I FIND ALOT OF EMPTY CELLS THAT ARE USELESS I WANT TO DELETE THESE EXTRA EMPTY CELLS... SO WHEN I OPEN THE FILE I CAN FIND ONLY the data .
I have attached a file as an example
I have been using CountIfs with a lot of luck until I added one extra criteria that it ignores.
ORIGINAL FORMULA
=COUNTIFS(ADate, ">" & N$2, ADate, "=" & 10000, WBid, "" & N$2, ADate, "=" & 10000, WBid, "
i am trying to remove some duplicates in a sequence and add new cells for missing ones
View 9 Replies View RelatedI need to calculate the percentage of cells in one column that have data in them compared to those that do not. This is easy enough to do by itself but here's where it gets tricky for me. I need this percentage calculated only when cells in a different column contain data.
Here's the specifics. All of the row and column references are exactly what I'm looking to have in my worksheet. If A5:A200 contain any value then I want to know the % of the cells in F5:F200 that have a value in them compared to the same number in F5:F200 that contain no value. I would like the answer to show up in B2.
Part of the issue is that cells A5:A200 already have a formula in them so I think that would count as a value. The one thing that might help is the fact that A5:A200 values that I'm looking for ALWAYS start with TN so that could be used as the search function. The reason why I need to base it on a value in A5:A200 is that the sheet is blank until I enter data in the rows. I can't have the blank rows below the last data that I've entered on the sheet count towards the percentage that I'm looking for.
Basically it's a sheet that I enter installations and service calls on. The information always has a TN# associated with it. Which through a formula is automatically populated in the same row in the A column. I track the installation or service call and when it's completed I enter a completion date in the F column in the same row.
I am trying to be able to keep track of the percentage of jobs completed (completion date entered in column F) compared to incomplete (cells in column F that have no completion date) but it has to only look at rows that actually have information entered in them which I think should be done by column A. column D5:D200 is where I enter the main information and there is no formula entered in the cells in column D so if it's easier to base it on that column then that's fine.
The 1st set is in a column. Nice & tidy all twelve characters in length & alpanumeric
zx0123123123
zz0123123124
zy0123123129
The second set is a mess, taken from a lotus notes inbox from the subject line off an email, eg. there Blah blah zz0123123124 etc etc. What I want to do is do a reconcilliation between the two with a lookup, but have no idea which route to go down to get round the messy data. I have been using =IF(ISNA(MATCH(A1,'[spreadsheet to lookup to.xls]sheet1'!$A:$A,0))," No match"," Match")
but here the data is clean. I have searched teh forum ;o) DaveH & found something about > Instr() but this can't be used in formulas..
i have a price list that I need to upgrade I will show how it is set now and what I need to do.
A1 B1 C1 D1 E1
=E1*1.25 59.99
Result $74.99
when i try to make E1 to a furmula (=E1+10%) it dose not work!!!
I need to add 10% to E1 so A1 is incresed 10% how do I do That
by the way I have much more cells than A1 it gose down to A123 and that is only page one.
in A1 I have 57 in B1 I have 75 so if I calculate percentage between those two I should get somewhere around 5% instead I'm getting 76%,
what am I doing wrong, in C1 I have =A1/B1 and then formated under percentage.
I have a column of numbers each have a 0. infront of them (example 0.2346
0.5698). I want to pull the number from the right until it hits the decimal sign. So for the two above the result would be 2346 and 5698
Need to create a macro that pulls certain data of a certain varying limit to different sheets, e.g. I have a sheet titled 'Data Dump' which contains lots of information specific to certain models of a product. I would like two other worksheets, one called '1' and another called '2' to pull the following information:
Worksheet 1 should pull data in columns A, B and I (in data dump) based on whether column H in Data Dump is = 1 to the total of 100 (i.e. 100 rows of information. (here an if statement would pull 100 and include empty rows, I do not want empty rows). Worksheet 2 should pull data in columns A, B and I based on whether Column H in Data Dump is = 2 to the total of 50 (i.e. 50 rows of information.
I have code I am writing where each cell contains 1 of 2 words in in various places of that cell all within column E. I need something to state: If E3 contains "apple" then write "A" in the cell. If E3 contains "Orange" then write "O".
View 2 Replies View RelatedFormula "(Cell-Cell)/ABS(Cell)"
When calculating percentage difference do I always subtract the smaller number/cell from the larger number/cell, then divide by the smaller number/cell or vice versa? Maybe I am over thinking it, but it is confusing the heck out of me
I provided an example below to illustrate a spreadsheet I work on. The numbers go up and down. I want to know how I should go about setting up the formula. If I need to ensure the smaller number is always subtracted from the bigger number, it will require a lot of manual intervention on my part.
Row 3 is =(b2-b1)/ABS(b1)Row 4 is =(b2-b1)/ABS(b2)Row 5 is custom. I went through each cell and made sure the smaller number was being subtracted from the larger number, then divided by the smaller number
PercDiffExample.xlsx
I hope my title was clear enough, but I’m not sure how to set this up. I have numbers in cells B4 and B13. I want to take the largest of these two numbers and multiply it by 0.85. I then want to take this number and compare it to a number in cell B23. If B23 is greater than the larger of B4 and B13 X 0.85, I want B33 to display “No” in a boldfaced red font. If B23 is less than the larger of B4 and B13 X 0.85, I want B33 to display “Yes” in a normal black font. This formula will be in cell B33.
View 5 Replies View RelatedI am trying to apply conditional formatting to multiple columns based on a percentage varience of the value in the first cell of each column. I'm sure this is not a new concept however I have been unable to find any advice when searching. I have attached an example of my problem as a picture speaks a thousand lines of code.
View 8 Replies View RelatedI am working on a spreadsheet in Excel '07 that will pull data from online and reformat it in a way that another program can digest. The last thing I need is for excel to recognize if there is a 6 digit number in a specific column.
This is tricky for two reasons:
1. Numbers come in three different formats, ### ###, ######, and ###.###
2. Sometimes there is also text within the cell, however I need to pull out just the 6 digits, and place them in another cell with format ### ###
I am trying to add 2 cell values together then show the total as a % of a value in a 3rd cell, however I also need it to allow for 0 values in the chosen cells without displaying an error message or it messes up the average formula elsewhere on the sheet?
View 2 Replies View RelatedIs it possible through a macro that the cells where numbers is in percentage format should not show any decimal points (is should not roundoff) just decimal points should not visible. I am aware that this can be done by "decrease decimal" but data will be across thousand of rows manually it will be very time consuming.
I have attached a sample worksheet : Percent.xlsx
I need to calculate the percentage based on self populating score. however I want excel/formula to ignore any cells which has "NA" in it so that it calculates the percentage based only on the cells having Numbers.
Now these Cells which contain Numbers might or might not contain numbers based on the "IF" function which decides wether the cell will have numbers or will remain "blank" or have "NA". To understand better please have a look at the enclosed sample (that would explain my need better)
I have a column with 10,000+ lines, and lots of them are duplicated.
I have a formula that tells me how many times they are duplicated, but it only looks for 100% matching cells.
Now, lots of cells are partially duplicated, for example:
A1 - Team Abcde
A2 - Team Abcde Fghi
B1 - Team Abc
I would like to have a formula giving me a percentage of how two cells are similar to each others by checking the words. In this case, B1 is 50% similar to A1 because only the word 'Team' is duplicated. B1 is only 33,34% similar to A2.
I am trying to calculate a percentage complete based on what a cells color is, the function must count the cells of a certain color (signifying in this case that something is complete for a particular "area") and distinguish that from cells in the same data range that aren't colored and calculate the percentage that are complete.
View 3 Replies View RelatedI need to divide Cell "A" with Cell "B" and put have the final sum in Cell C. e.g. Cell A===10 Cell B=2 Therefore, I want Cell C to say 5
View 6 Replies View RelatedI would like to do the following: * Format numeric cells (cells with a percent sign) to zero decimal places. I have a set of macros that I am combining to clean up a data set and these are two of many (removing blank lines, duplicates, blue/bold, etc.)
View 2 Replies View RelatedI have Put 15 Digit Number 234567890123456 in Cell A1. I am trying to get each Digit Seperately into Single Cell from B1 to P1.
View 5 Replies View RelatedI am trying to have my spreadsheet pull data from one tab and cell if they match another.
Tab "Ag Orders" column H, I enter data in lets say cell H37. Whatever I enter, if it matches tab "reference List" C:C, then "ag orders" column G (specifically G37) should enter the data in "reference List" D:D
So since in H37 I entered 34000 - 314620, G37 should pull in Farm Operations since on the referene list tab that string of numbers (C11 matches up with D11)
a little confusing but I hope it makes sense.
13-14 budget-AG.xlsm
This isn't the exact formula I used but something like it and it wasn't working. It wouldn't match the data up correctly on a few of the department names
=IFERROR(LOOKUP(H35,("11000 - 311010","11000 - 311020","11000 - 311510","11000 - 311610","11000 - 312010","17800 - 311010","17800 - 311510","17800 - 312010","34000 - 314610","34000 - 314620","34000 - 314640","34000 - 314660","34000 - 314680","34000 - 314690","81008 - 840008","81009 - 840009","13863 - 312040","13864 - 312050","71060 - 521620"),
[Code] ..........
I have a sheet with 200 sheets in called workbook x , I need to create a summary new workbook with only data on 1 sheet.
I want to pull specific cells from the large workbook x to 1 single sheet on a summary workbook:
A6 I want to be surname taken from B1 of workbook x
B6 will be first name taken from C1 of workbook x
Then I will copy data from M1 on mastersheet to cell C6 on new workbook
Then I want to copy Row A11 up to T11 and paste on the new workbook (Summary) in D6 staying in the row 6
Not sure if this is the tricky bit I want to repeat as above B11 to T11 but paste in the next empty cell of the same row of D in my summary
I need to repeat this action upto A23 to T23
Then I need it to move on to the next sheet in X and repeat all the steps above but do it on the next row down row 7 and so on
Attached is the sample file.
Basically I have a number in column A, just wondering is that any faster to allocate the number into individual cell as shown in the attached file.
What formula I should use for this condition:
A (Contains many months, e.g. 3 November, 2 December, 10 January, etc. -- in excel date standard format mm/dd/yy)
B (Contains Paid, On process & Waiting for Invoice -- using IF formula)
I want to calculate the percentages of November that has been paid from all of A that contains November in it in column C.
What formula i should use?
I already use =SUMPRODUCT for counting the November.
I only want to use 1 other column to calculate the percentage (C column)
I was messing around with some Macros, as an issue came up where clients were pasting over Data Validated cells (thus removing the validation). Somehow though, the feature where you can select a cell, then pull the active cell down through the column (and then can copy, fill series, etc)has become disabled. I deleted all the macros, and turned them off in the Trust Center, but when I click on a cell the box and plus sign still won't display for me to pull the cell down the column.
View 2 Replies View RelatedFormula to pull the lowest number that falls in Cells I2:L2 and the number must be 0 or Greater. Some of the numbers might be negatives and I am trying not to pull those numbers.
View 3 Replies View Related