I am trying to create a bar chart that changes color based on a percentage range. Any advice on how to do this? I am using Excel 2007, Windows XP, Sharepoint 2010.
View 1 RepliesIm looking to create a bar chart in Excel 2010 where the totalnumber of widgets is 33 and the number produced so far is 11. The bar chart would be a single bar that represents the percentage complete (33%) with the chart maximum range being 100% which would represent the number 38.
Ive included a mock up example of what the data and chart would look like
How to change the background cell color based on value ranges(s)
I tried conditional formatting but it works between two values only, in my assignment I want to show:
River levels in relation to flood class
>=2m =2.6 =3m major flood (background turns red)
I hope it is possible in Office 2007
I have a Pie Chart that which is updated based on a dropdown list.
The pie chart works fine for all my dropdown options - except one!
Basically, on this particular chart, the entire chart is filled with one colour even though the split is 90/43.
I am using Excel 2007. The options for Fill are set to Automatic & Vary Colors by slice is checked.
I am building this waterfall chart. I'd like to put conditional color formatting to change the vertical bar automatically e.g. if it is positive, the bar color is green and if it is negative the bar color is red.
View 3 Replies View RelatedTrying to create a macro to run through the following steps when I select a chart and run the macro:
Paste>As Picture>Copy As Picture>As Shown When Printed>OK
I used the macro record feature and when I enter the shortcut it always returns the same chart. How do I get it to run on whatever chart I have selected instead?
I am constantly using this function to copy charts from Excel into PowerPoint presentations and am frustrated with all the extra steps it takes (versus just Ctrl-C).
I would like to create a PDF file from a RANGE Name, excel 2007, attach it to MS Outlook 2007, Once in Outlook I will select the recipient, add some remarks and hit send. I can do this now with a workbook but not a range.
View 1 Replies View RelatedMy chart data range is: ='Summary Data'!$A$2:$BF$8.
Since it expands a few times a week to BG, BH, BI etc., it seemed to make sense to use the standard OFFSET and COUNTA formula to expand it. The every time I typed the Offset formula in, it worked but each time I save it, it changes to an updated (correct) fixed reference. i.e. back to the format above.
Many threads I've read seem to say that you should be able to use an expanding range in charting.
I am aware of the Visio capabilities of importing data into the org chart wizard to create an organization chart. Is there a similar capability in Excel only? I know there are smart art org diagrams, but if I have a spreadsheet of several hundred people, is there a way to import it into a chart (again, similar to the Visio process).
View 3 Replies View RelatedExcel 2007, Windows 7.
Most details are shown in the spreadsheet below. I would like it to be dynamic because the quarterly and annual data dumps I'm working with are are hundreds to thousands of lines.
Have the list be sorted, which is a part of the first attempt, would be nice but is not necessary. At this point, just being able to generate the dynamic list would be fantastic.
Excel 2007ABCDE1product lines:consist of these product subtypes2Widget series:Widget.type1Widget.type23Fidget series:Fidget.type4Gidget series:Gidget.type1Gidget.type2Gidget.type356data dump of parts sold or used in repairs7product subtype repairedpart number
[code]......
I am trying to use VBA in Excel 2007 to change bar chart series colors. I have found a few posts that link it to a cell background, but I'm struggling to find one that does the font color.
It would be great if I could change the bar chart series to match the color of the text in the A column, so that if I highlighted the value in A1 and changed the text color to orange for whatever reason, the chart updates the value of 1.2 to an orange bar (see below).
T. A1 B1
Sample 1 1.2
Sample 2 2.1
Sample 3 1.7
Sample 4 5.6
Originally Posted by Question
Create a well labelled pie chart on a separate worksheet to show the profit made by each of the Liverpool departments to the overall profit for 2006. On the labels show the percentage contributed by each department.
I want to create a pie chart in Excel 2007. The data is not next to each other in the columns. How do I create a chart so that it includes the legends as the various departments and the data shown as the figures given under 2006?
Does anyone know if there's a way to color code points on a scatter chart based on their values in a "3rd dimension" (i.e. other than the 2 dimensions represented by the chart axes).
You might imagine a scatter chart that plots transactions by price (y) and units purchased (x).
In that scenario, it might also be nice to color code each point by the region that made the sale.
The only way I know to do this is to manually create separate columns of data for each region, so that each region can be plotted on the scatter chart as a separate data series.
But since I'd like to experiment with several color coding alternatives, I'm wondering if there isn't a simpler way...
For instance, Rob Bovey's "XY Chart Labeler" can add data point labels to a scatter chart...
Is there, perhaps, another add-in that might enable color coding of data points based on a 3rd set of values?
I have a spreadsheet created in Excel 2003 (which is what we use at work, unfortunately).
My employees periodically take a test to ensure they have certain items memorized (or are making progress to that end). The spreadsheet rows show all 46 of my employees, and their test scores. The columns are the dates that the tests are administered. I can create a line graph based on the chart data, and interpolate these data with no problems.
The problem is that there are 46 employees! 46 lines on the same graph make for a very cluttered, hard to understand visual. I want to simplify the view by "filtering out" some of the data.
I have an additional column in my spreadsheet for each employee's work area (Area 1, Area 2, etc), and another column with data based on first letter of last name (the values here could be "A-G", "H-M", "N-S" and "T-Z", for example). I figure i could filter my line graph based on these two columns. For example, somehow select just Area 1, and reduce the number of lines on the graph to 16. Or better yet, Choose "Area 2" AND "A-M" and end up with 7 employees (and therefore 7 lines on the graph).
Here's what i have tried:
1) Select the work area column, and use the Filter, which created a drop-down list at the column heading. When i use this drop-down list, i can easily filter the data in the worksheet by Work Area, but this is not reflected in the line graph, which still shows all 46 lines. The problem was that i forgot that i had set the Calculation Options to "Manual". Setting this to "Automatic" (or leaving it on Manual and pressing F9) solved the problem, as the chart now updates when i use the filters. Calculation options are under the "Formula" tab in 2007, or in Tools -> Options -> [either calculation or formula, i forget what it's called] in 2003.
2) Create several separate line graphs in several separate sheets. I wouldn't want to assign someone else the task of maintaining a spreadsheet of such inefficient design.
I realize all the numeric data was originally not in percentage format (a simple division without being multiplied by 100). So when I set the vertical axis to percantage format, it does display it as a percentage but with the "%" sign. Is there any way I could get rid of the sign? It's not necessary as the axis has already been titled accordingly. I'd hate to redo all calculations, multiply by 100 and then create new charts only to get rid of the sign...
View 1 Replies View RelatedMy Excel 2007 worksheet contains a cell where a percentage is manually input. A freight cost is calculated based on the input percentage. Typically, the percentage is 3-7% but once in a while freight is excluded and the percentage is zero.
My issue is that when a 0 is input the cell appears blank and I would like it to display 0.00%. The remainder of the worksheet needs to have the zero display turned off.
I am using Excel 2007.
Sheet 1 - I have columns filled with dates (weekdays only) For example 28-May, 29-May, 30-May up to 28-Nov. Above 10 rows below each date columns and each cell has some values.
28-May29-May30-May
0.50.50.5
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
Sheet 2 - I have Start date defined in B1 Cell, and End date defined in B2 Cell
I need defining the formula to sum all the cell values fall between the date range defined in Sheet 2 B1 and B2.
For Example if B1=28-May B2=30-May, I want the sum of all the numbers come under the range of 28-May to 30-May, with this above example, it should be 19.5.
Trying to create an excel chart to create totals based upon different keys. I
need to be able to calculate how many customers there are by Manager and then
By Rep. Then to figure out how many were New, Current, Total # of RSVP and
attended for that Rep. Below is how I have started but I am having some
problems getting certain parts. I know when I get one the rest will fall into
place. I can calculate how many total customers by manager and by rep just by
doing a Countif command but how do I determine the # of New, Current etc. Is
there a If Than command? Managers Totals are simply his reps totals.
Example..
A B C D E
F G
1 Manager Rep Customer New Biz Current # RSVP # Actual Attend
Need totals to look something like this....
A B C D E
F G
1 # of Cust # New # Current #RSVP #
Actual Attend
2 Manager
3 Rep 1
4 Rep 2
As you can see in the attached file, I have a column of classes , a columns of related revenues and the total for each class. I have to create a column, next to these, where I can create the percentage with respect the sum of each class (as you can see by the formula). My problem is I am not able to say vba to find the totals and to create the percentage just with the revenues related to that total.
p.s: I have to work on excel2010.
I'm having an issue getting the correct results from a calculated field in a pivot table in Excel 2007.
In column A I have "Business Name", in B I have a sum of the amount of lines a customer has, and C is a MAX of the number of employees the customer has at their location.
In one example I have a business with sum 50 lines and max 30 employees but when I try to make the calculated field 50/30 (should equal 166%) i get 9.2% instead.
The reason appears to be because there are 18 types of lines the customer has and 18 x max 30 = 540 and 50/540 is 9.2%. In the attached example it's all the same business location so the total number of employees (30) is the same for each row and each row in the raw data is a set of lines with similar features.
I attached an example. CalcFieldProblem.xlsx
how to make a % of running total in pivot tables in excel 2007. the running total in is only available not the "%".
View 1 Replies View RelatedI am using Windows 7 and Excel 2010.
Is there a way to create a macro to color code a cell based on the value in a cell, and then look up a value in a table, then color code it based on where it fits into the table?
I have a table of values for about 30 projects. In column g - there is a CPI value (see bold column)
Example: Project ID
Name
Program
PMT
SI ID
AC
Milestone
TCP Level
[Code] ......
Here is the table:
I have to color code a cell, base on the CPI and how it fits into the table below. So if the current Milestone is M2 or M3 and the CPI calculated is .14 the cell would be colored RED, if the CPI number is 2.01 for M2-M3 I would want cell to be colored Turquiose. If we were at Milestone M6 and the CPI was 2.01, it would be colored blue. If the CPI was .75 at Milestone M5, it would be colored Green
LEGEND
Earned Value Limits
Milestone
RED
Yellow
Green
Turquoise
Blue
M2-M3
2.15
M4-M6
1.66
M7-M11
1.26
I have a quarterly report that measures the safety performance of the plants in our company using bar charts. One set of 4 charts for the company as a whole and four additional sets of four for each of our divisions for a total of 20 charts.
I would like to change the color of the bars based on whether the location has met (bars colored green) or failed to meet (bars colored red) the goal for that criteria. The company average will be a yellow bar. Of course it can be done manually but that is really slow and tedious.
Is there a way, using VBA or a macro, to change the color of a bar (data point) based on the value of that data point? Can it run through all of the data points in each chart and make those changes based on criteria that I can set for each type of chart?
This is probably elementary, but I'm struggling and would appreciate any help as I have very little excel VBA experience to draw from.
I have assembled code which changes the cell color based on a value change in Column A. Column A will contain many different groups of repeating values. This code works well and and I have been able to figure out how to limit the number of colors to only 2. The end result is each set of similar values in column A is visually grouped by one of two alternating colors.
The number rows in the data set is variable as the data set is extracted from SAP. The number of columns is fixed.
What I want to do now is set the cell color in columns B through F the same color that was assigned to the row in column A. So if cell A3 is set to colorindex = 6, then I want to set the range of cells B3 to E3 to the same color.
Here is the code I am using to set the color of the cells in Column A:
How I can add background color to an excel chart. I need from left to right the 2/3rds to the chart to be light gray and the other 1/3 light blue.
View 7 Replies View RelatedI have a horizontal graphic chart showing Intel and AMD processors speeds. I was wondering if it is possible to tell Excel to apply a color to Intel processors bar and another to AMD ones?
View 9 Replies View RelatedI have a workbook that I've built for a project. I've attached a sample workbook. What I'm trying to do, for the entire sheet or workbook if possible, is turn any Cell with a percentage of 30% to 49% yellow and any cell with a percentage of 50% or more Red. I would also like to move the ID's of the variable cells, for example Id number 9922, to the cells beside the description of the rows, Affected would be an example, if the information contained in the same row as the ID meets with a set of variables.
For example I only want the ID's moved if they correspond with IDsub 1-25. One more thing, the people who will be using this spreadsheet will be copying data from a website when it is imported it does not insert the values as numbers. I would like to format the cells, in example workbook they would be any of the cells labeled ID IDsub Variable or Number, so that anything put in that cell will automatically be converted to a number.
I should also probably add that the formatting will be done on approximately 80 rows a sheet with 47 sheets.
User of Excel in Office 2007. However, I for statistics about how my Bitcoin Device's works and decrypts Bitcoins per day for trends and statistics, and so on
Now while I was away so had the power gone, and for almost 24 hours so stood all still, I would now like to outline in red the date / dates where I have zero or very low running time for specific date, but I can only change Fragen for all dates, not individual dates.
The stack's not exist in the data value is equal to zero (null) where by I want to be able to get the date in red color, and possibly also in bold. see print screen below.
[URL] .....
I want to be able to change a color of one cell according to color of another cell. suppose, cell A1 has text "apples" having red color. Now, if I enter text same as A1("apples") in another cell, say B1, then color of text entered in cell B1 should be red. I am using Excel 2007
View 3 Replies View RelatedI am wondering how can I count different color condition color cells?
I am currently using this UDF,
Code:
Function ColorFunction(rColor As Range, rRange As Range, Optional SUM As Boolean)
Dim rCell As Range
Dim lCol As Long
Dim vResult
[Code]...
However, this code count the entire conditioned color cells that I have. What I want is for the code to count two different colors within the same column range (like B1:B10). For example, I have 3 red color cells in range B1:B10 and 7 green color cells in range B1:B10. So, I want it to count 3 and 7 seperately rather than giving me the total of 10.
Important Note: As it is a conditioned coloring, there is no fixed coloring as to which cell will have the red or green since it is based on conditions.
One last time, I am using Excel 2007.