I have an excel sheet in which i have a cell A11 with drop down list values=YES/NO.
Now based on the value in this cell i want to fill color in the cells(B1 to B10) i.e for e.g. if i select YES in the cell A11 then the cells(B1 TO B10) should become green in color.
Attached is an sample of what i want.
This is probably elementary, but I'm struggling and would appreciate any help as I have very little excel VBA experience to draw from.
I have assembled code which changes the cell color based on a value change in Column A. Column A will contain many different groups of repeating values. This code works well and and I have been able to figure out how to limit the number of colors to only 2. The end result is each set of similar values in column A is visually grouped by one of two alternating colors.
The number rows in the data set is variable as the data set is extracted from SAP. The number of columns is fixed.
What I want to do now is set the cell color in columns B through F the same color that was assigned to the row in column A. So if cell A3 is set to colorindex = 6, then I want to set the range of cells B3 to E3 to the same color.
Here is the code I am using to set the color of the cells in Column A:
Summary of performance of various products against target is as follows,
Product vs Target
Color Code
Result
CH4OH
Green
1.0
[Code] ........
I need the final result automated as follows,
If 2 green of the 4 products, then final result Gree
If 2 Amber of the 4 products, then final result amber
If 2 Red of the 4 products, final result Red
Is there a way to automate this?
if you have an error on a spreadsheet, why doesnt this come under " case else" when vba is run past it? I have this simple code, but it doesnt work when the value on the spreadsheet is an error ("N/A").
Sub RQVChng()
Dim lgrow As Integer
lgrow = 7
Do Until Cells(lgrow, 5) = Empty
Select Case Cells(lgrow, 17).Value
Case 1
Range(Cells(lgrow, 1), Cells(lgrow, 18)).Interior.ColorIndex = xlNone
Case 2
Range(Cells(lgrow, 1), Cells(lgrow, 18)).Interior.ColorIndex = 6
I have been tasked with creating a Macro in order to help speed up a rather simple set of steps that are taken to format a spreadsheet each day. The last step, however, is not so simple. I would like to add a statement to the macro code that does that following:
Based on the value of a specific cell, color the cell and all corresponding cells within the same row (from colums A to AA) yellow. Essentially, cells in column D may have a the value "No Allocation", and if they do, I will need to format that cell yellow as well as all the cells within the same row for the colume range A to AA.
I would like to format the color of cell A1 on Sheet 1 based on true or false values from cell range A1:A10 on sheet 2. For instance:
1. If all cells on sheet 2 in range A1:A10 were false then cell A1 on sheet 1 would be red.
2. If some cells on sheet 2 in the range A1:A10 were false and some were true then cell A1 on sheet 1 would be yellow.
3. If all cells on sheet 2 in range A1:A10 were true then cell A1 on sheet 1 would be green.
How to change the background cell color based on value ranges(s)
I tried conditional formatting but it works between two values only, in my assignment I want to show:
River levels in relation to flood class
>=2m =2.6 =3m major flood (background turns red)
I hope it is possible in Office 2007
I am using Windows 7 and Excel 2010.
Is there a way to create a macro to color code a cell based on the value in a cell, and then look up a value in a table, then color code it based on where it fits into the table?
I have a table of values for about 30 projects. In column g - there is a CPI value (see bold column)
Example: Project ID
Name
Program
PMT
SI ID
AC
Milestone
TCP Level
[Code] ......
Here is the table:
I have to color code a cell, base on the CPI and how it fits into the table below. So if the current Milestone is M2 or M3 and the CPI calculated is .14 the cell would be colored RED, if the CPI number is 2.01 for M2-M3 I would want cell to be colored Turquiose. If we were at Milestone M6 and the CPI was 2.01, it would be colored blue. If the CPI was .75 at Milestone M5, it would be colored Green
LEGEND
Earned Value Limits
Milestone
RED
Yellow
Green
Turquoise
Blue
M2-M3
2.15
M4-M6
1.66
M7-M11
1.26
I have got a userform with lots of controls,
One of the action's on a large group of the controls is the same but except for one number
here is an example
If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3
If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3
If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3
This makes a cell that correlates to the textbox red if the text in the textbox is red.
Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.
Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?
I have two columns. The first one (A) contains cells that have different Fill colors. The second column (B) contains text adjacent to the colored cells. I am trying to change the color of the text in the second column (B) to the corresponding color in the adjacent cell in the first column (A). I don't think conditional formating works well in this situation. I believe the solution would be some sort of macro.
View 3 Replies View RelatedI have various row cells in column (F) filled with the color Green. And corresponding text in Column G. How can I change the text of that particular row to white.
i.e.: if any cell in column F is Green, change the text color of that row in Column G to white?
I am looking for a very simple script that will achieve the following:
On the clicking of a button, Select and shade in a cell yellow, delete the yellow shading of the previous cell. The shading & selection should move up a column of cells, 1 at a time, in the following order:
From B10 to B9, then B9 to B8, B8 to B7 etc until the selection and shading is at B2. Once it is at B2 subsequent clicks will simply keep it at B2 (the top). Thus after 8 clicks the shading & selection should travel from B10 to B2, with only 1 cell being shaded yellow and selected at any one time.
What i want to do is based on values in a worksheet row to fill the corresponding columns with black color on another worksheet. E.g i have the first row filled with 1,3,5,6,8 then i want the second worksheet on the first row to have filled with black color the 1st,3rd,5th,6th,8th columns and nothing on the others. The same goes for the entire sheet.
View 2 Replies View RelatedI have attached an example file.. Basically I want the text in a range to change to red if one cell="Description".
Also, I want a cell's text to turn blue if it's corresponding data in the row says "Click on Title to Follow Link"
The example file explains it a lot better..
Thanks for the help.. Sorry if this may seem like a duplicate post but I was not able to get any of the examples I searched for to work that others have posted.. Also, maybe conditional formatting would be an option here but I could not get it to work as it will only meet the first condition that comes across thats true...
I am trying to create a bar chart that changes color based on a percentage range. Any advice on how to do this? I am using Excel 2007, Windows XP, Sharepoint 2010.
View 1 Replies View RelatedI'm using Excel 2007.
I have a field with a "YES"/"NO" drop-down box. There are three fields below which have some default formatting (thick purple dot-dot-dash borders). When the drop-down field is "YES", those three fields should change borders to a single thin black bottom border line.
OK... so that's the setup. And I should note here that it does in fact format properly. However, the problem I'm having is that the screen does not update / repaint with the new formatting. The thick purple dot-dot-dash borders remain, for the most part.
If I page down, then page back up, the new formatting appears just fine. When I switch from "YES" to "NO", again, the formatting changes, but the screen does not update/repaint so the only way to see the new formatting is to again... page up and then page down again.
I'm wondering if anyone knows a way to force the screen to repaint/update so that my users will see the new formatting without having to page up/down.
I'm working on a workbook that will track staffing patterns.
The workbook has three worksheets: Sheet1 "RCS", Sheet2 "HCT' and Sheet3 "Hidden". I've attached the workbook to this thread. The password for the form is "j".
On Sheet3 "Hidden" I have two tables that are set up to collect the SUM of columns on Sheets1 "RCS" and Sheet2 "HCT". I'm finding the SUM of each range by way of the background color. I've set up the following formulas and when the "data collection tables" are in the same worksheets as the original information, the formula's work perfectly:
The following functions are pulling data from Sheet1 "RCS" and placing them into a table in Sheet2 "Hidden"
[Code] ........
The following functions are pulling data from Sheet1 "RCS" and placing them into a table in Sheet2 "Hidden"
[Code] .......
I have two more functions that aren't working due to the fact that the source values are percentages and NOT plain numbers. The above functions work great for SUM but not for percentages. EXAMPLE--Let's say, 3 sub percentages it gives me the SUM of the 3 percentages (i.e. 85% + 100% + 100% = 285% instead of giving me 95%.
[Code] ........
How might I use the following functions to find the average of the source fields instead of the SUM?
I have an Excel 2010 spreadsheet consisting of many worksheets (20 or so). Each of these worksheets contain detail level data regarding different projects. One of the columns in these worksheets is the 'Status' column (column F). There is conditional formatting on this column where if the text is 'G' then change background to a green color, 'Y'=yellow, 'R'=Red and 'U'=Grey.
The first worksheet is a summary sheet that I would like to pull information from each of the detail worksheet's columns B, D, E, G and H if the status column (Column F) is 'R' or 'Y'.
The number of rows in the detail worksheet can change each week (as few as 0 and as many as 100)
I have two columns. In column B is the date of "last check". I column A is the date of "next check". I would like to have cell A2 in yellow color 334 days after the date entered in cell A3 and than in red color 365 days after the date entered in cell A3. Same thing for cell B2 related to date entered in cell B3. Yellow color in cells announces that check will expire within 30 days and red color that check has been expired.
View 1 Replies View RelatedI am working on a workbook with 200+ sheets and an index linking to each of the sheets. On the sheets there is a cell containing the results of calculations and I need the cell referencing the sheet in the index to change background colors depending if the calculations value is greater or less than 0. I currently have working code that also changes the tab color of each sheet depending on the value, but i am trying to add the index cell background change functionality into that. also, the index listings is subject to change. my working code is
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("d34").Value < 0 Then
Me.Tab.ColorIndex = 3
ElseIf Range("D34").Value > 0 Then
Me.Tab.ColorIndex = 4
Else
[Code]...
and the code i am trying to get working is
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngX As Range
Set myRange = Worksheets("Index").Range("A1:A500").Find(Range("C2").Text, lookat:=xlPart)
' the C2 is the reference the title that would be on the index
If Range("d40").Value < 0 Then
[Code]....
I keep getting the runtime error '1004: application-defined error or object-defined error the thing is, i ran the cell background changing code in a normal macro before integrating it in my other worksheet code first and it worked fine. I have a little code experience, though not much in vba and I am unsure what the issue is. if there is another better way to accomplish what I'm tring to do, that would also be fine.
I am working on developing QR Codes using some MATLAB code and it would be really convenient if I could create an excel program which changed the background color of a cell containing a 1 to black and a cell containing a 0 to white.
View 2 Replies View RelatedI did a search on this site and found some code I was looking for (see link:
http://www.excelforum.com/excel-prog...e-in-cell.html - Leith Ross's response code).
The code works perfectly, however, if I save the workbook with a different spreadsheet on top than the spreadsheet referred to in this code, I get an error message: Method 'Range' of object '_Worksheet' failed.
I should state that I did change "Private Sub Workbook_Open()" to "Private Sub Auto_Open()".
I assume I need to modify the code but am unsure as to how.
how do I turn a row range a different color based on an answer in a cell value for example:
If B4 = Wont have
Turn grey the range C4:G4
I'm putting the sum of 3 cells in a 4th cell(D2). If the sum is greater, I would like the sum to be the color green. If the sum is less, I would like the sum to be the color red. Is this possible?
(D2) has change value, I want to compare the new value against the existing one.
Quick question, I know how to change a cells background / text color based on it's own value using conditional formatting but what would be the formula to change cell A1's background color based on the value of cell C1?
View 6 Replies View RelatedI have a worksheet 'stock levels' which I list all my products and the amount we have in stock.
I have another worksheet called 'on order' which lists products that we currently have on order.
In the 'stock levels worksheet, I have a column called product id' & 'on order'....
I would like to do a check of the 'on order' worksheet to see if 'product id' exists in the 'product id column' - if so then color the 'on order column green, if not leave same.
I'm trying to set up a spreadsheet to track 20 vehicles mileage, and when they are due for an oil change. I have the value of when they are next due in column D, and the actual mileage in column G. I want to have the row for each vehicle turn yellow when they are within 1,000 miles of needing an oil change, and red when they are due/overdue.
View 2 Replies View RelatedI have been trying to figure out how to change the color of a specific tab based on information being entered in cell "B9" for each sheet that the tabs represent. If there is information in cell B9 on "tab 1", I want only tab 1 to change a color. If there is no information entered in cell B9 of tab 2, then I want tab 2 to stay with its default color.
There are 34 tabs I want this to happen to, out of just more than 60 total tabs on the worksheet.
A brief rundown on what I am trying to create. My family and I have a NFL football game we do every year to see who can correctly guess the most winners over the course of the season and then the ultimate winner receives a prize at the end of the season. After years of doing this manually, I decided to try and put my Excel skills to use and create a more "automated" worksheet.
After some heavy research, I was able to successfully create a user defined VBA which would calculate a "win" every time a cell is highlighted (in my case the winning team's name). For example, I highlight New England Patriots and when the formula calculates each person receives 1 in their win column.
However, I have now reached a problem I failed to think of. The formula does not take into consideration the picks everyone is going to make. Not everyone is going to select the winning team, so the current formula I have is giving credit for every highlight. Is there a way to add an if statement to this? For example, if person A selected New England Patriots and it's highlighted then give 1, if not give 0?
I know it's usually hard to base a formula off a cell color.
For some reason, I cannot attach the spreadsheet I am currently using. For a brief overview, cell M1 contains the color which I would use to highlight the cells in the range A2:H17. This formula is in cells B21 - B27.
The VBA which I input was:
Function CountCcolor(range_data As range, criteria As range) As Long Dim datax As range Dim xcolor As Longxcolor = criteria.Interior.ColorIndexFor Each datax In range_data If datax.Interior.ColorIndex = xcolor Then CountCcolor = CountCcolor + 1 End IfNext dataxEnd Function
Where the picks which are made should be logged. Whether each person gets a separate color and the VBA is based on that, or like I alluded to above if there is an X here and it's highlighted or something.
I'm trying to change the tab color based on a cell value. This I can do, but only using a Change Event with code in the Worksheet section. I would like it to update more instantly and without the need for a Change on the sheet to occur. So I was thinking a Worksheet_Activate event, or perhaps a Workbook_Activate event, but i can't get it to work.
For further info, if not confusing, the cell referenced in code below (on the Dan sheet) is filled using a user entered variable when the workbook is opened. Depending on this value, i would like the tabs to update their color accordingly and instantly, as well as the color updating if the cell B3 on the sheet is changed. Perhaps I need a Worksheet Activate & Deactivate and Workbook Activate and Deactivate?
Public sPeriod As Long
Private Sub Worksheet_Change(ByVal Target As Range)
sPeriod = Worksheets("Dan").Cells(2, 4).Value
If Target.Count > 1 Then Exit Sub
If Target.Address(False, False) = "B3" Then
Select Case UCase(Target.Value)
Case sPeriod - 1: ActiveSheet.Tab.Color = RGB(0, 0, 255)
Case Else: ActiveSheet.Tab.Color = RGB(255, 0, 0)
End Select
End If
End Sub