I would like to combine the 2 formulas below but I don't know how to do this.
FORMULA 1
=J015_100!S6
FORMULA 2
=IF(ISNUMBER(SEARCH("Y",J015_100!U6)),"APPROVED","")
I would like to display the value of formula 1, unless the value of formula 2 is "Y" in which case the value would be "APPROVED".
Ok, These are the three formula's. How do I combine them or can I.
=IF((B2="GOV"),[@[Gal Billed]]/1000*1.5)
=IF((B2="NPROFIT"),[@[Gal Billed]]/1000*2,0)
=IF((B2="COM"),[@[Gal Billed]]/1000*3)
I have two formulas that i need to combine as one, but i dont now how.
This is the other formula:
=SUMPRODUCT((Huollot!I2:I500="Ty”n alla")*(Huollot!K2:K500="Warranty")*1)
The other one:
=IF(NETWORKDAYS(Sheet1!C1;Huollot!C2:C500)>20;1;0)
the biggest problem is that this formula does not work as it is. Or is there some other function than networkdays that i could use?
The purpose of the formula is to count how many "objects" that are in service have been there for over 20 days. There a a few other criteria also, but sumproduct takes care of that. Can networkdays even be used the way i´m trying to?
Working on the same simple chart NBVC helped me on, but this is for AVERAGE instead of SUM and with an added variable.
View 14 Replies View RelatedI would like to have cell A3 contain two different formulas. I may be doing this wrong, so here is what I would like to do:
Cell A1 will contain a number that will change from month to month, but will need to show as $0 until then. Cell A2 will contain a fixed sum number from month to month Cell A3 will contain the difference between cell A1 and A2
I wouldl like cell A3 show as $0 until a number is inputted into cell A1
A1
$0
A2
$2000
A3
$0
The formula I have in cell A3 is =SUM(A2-A1), but cell A3 shows $2000. I remember doing this before, cut can't remember the exact formula. Something like =if(A1
i have 2 worksheet function IF statements that of course look for certain conditions, but in some instances i need to combine the IF statements in one cell, the 2 i need to combine are below:
=If(D3="S","Sick",If(D3="SW","Swapped",Sheet2!B3))
=If(Or(C1="Line On",G1="Line On"),Sheet2!B3,"")
so what i need is for the cell to show either Sick, Swapped or the contents of Sheet2!B3 however if both C1 and G1 show Line Off then cell must be blank, which is what i achieve with the second if statement.
I have an excel sheet that have a large set of datas. In these datas in one column most of the datas are indicated as green but some of them are red. I can pick the red ones by using filter option but I also wanted to show the red cell values in one cell. For example, Cell1;Cell2;Cell3 like this (the ; should be between them). I try to use macros but that is not the program that I have full knowledge about it. S
( Like this
IF
A(i)= red
Then
B(i)=A(i)
end if
)
I have two formulas that I have worked out to deliver the results independently. I would like to join them together into one formula and add an If condition that if the two match then add a "+" to the end of the string.
#1 finds the base value :
=IF(ISERR(FIND("/",I2)),I2,LEFT(I2,FIND("/",I2,FIND("/",I2)-1)-1))
#2 verifies the value is a valid color:
=INDEX(M1:M41,MATCH(J2,M1:M41,0),1)
I would like to join the two formulas together and if they match then add a space, " " and a "+" to the end of the string. If there is no match then return the base value.
i have about 100 worksheets in my workbook ..i need to combine them into one worksheet ...all my 100 worksheet has many formulas in some of the cells.
i want to combine all the worksheets one below the other with a gap of 5 blank rows after each worksheet contents....i just want the values in each worksheet to be pasted and no formulas...
I need to combine the following formulas into one but obviously it won't work due to the limitations. Would the following be better using VBA? If yes. At the moment, they are in 3 separate columns and working but indepenantly. It basically says, if the agreement is older than todays date, write expired, if not if its for 12 months, then calculate the percantage according to number of days. and so on for 24 months and 36 months...................
View 2 Replies View RelatedI need to know if it is possible to combine these 2 formulas (1. (RIGHT(C23,0)&RIGHT(C23,4)) and 2. LEFT(E23,2)&":"&RIGHT(E23,2)
into a single cell. I have a date time group that is in text format. I need to take the last 4 digits (the time) and pull it out into another. Then take that cell and convert it into an actual time ie 2:30.
example: 01may2014 0831 first formula pulls the 0831 into another cell. then the 2nd formula converts it into a time 8:31.
After this occurs, I can then subtract times from different categories in my spreadsheet.
My, problem, is that I cannot combine the two formulas. They work great by themselves. I am just trying to make formulas more compact and hopefully more efficient.
I'm looking for a way for Excel to combine formulas together into a more compact form for me.
Attached is a very simple version of what I want, my actual formulas are very complex but I'd still like a way to have them automatically combined into a single cell.
Alternatively, what is a good way to break down a very complicated one-cell formula and still keep things organized?
Here is the one-cell version of a formula I work with.
[Code] .......
That formula is difficult to work with in one cell, so on another sheet I have it broken down into parts so that if one part isn't doing what I want I can change it. This takes up a LOT of space because of the other steps I do (the above formula is just one step) and I'd like to combine it together.
Attached File : Excel Formula Combination Question.xlsx‎
I am trying to combine the text values of several formulas in addition to adding some text (punctuation) in between.
Here is the data that I am trying to combine
C14: 2013
C15: Period 6
C16: Week 1
In Cell C13, I would like to have this value returned: "2013 - Period 6, Week 1"
Is there such a way to do this?
I am creating a Sales Pipeline. I have learned everything I know about excel on my own...lol. So probably not so much. My problem is I need a formula that can total a range of cells only "if" they meet "2" different criteria. Is this possible. I am attaching my workbook. I have formulas in there but Im not getting totals. I dont know where Im messing up. (all info in work book is fiction)
View 4 Replies View RelatedI am using a lot of linked reports that have to be rewritten each month. For example smaller formulas look like this:
=('S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$228*2)+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$262+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$292
What I want to do is extract the file path from the above formula and make it a composite of several cell references.
So what I need is to have a cell where they can change the month and another where we can change the year. So I set up several named cells that look like this:
_MONTH =11 November
_YEAR =2013
_JOBCARD ='S:PUBLICProductionJob CardsMOLDING
_PATH =_JOBCARD & _YEAR &"" &_MONTH
I tried several versions, I am hoping for something like this:
=('_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$228*2)+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$262+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$292
I've found a few macros that will automate changing cell references from absolute to relative and they work great. However, when I run the macros on formulas that have references to another worksheet or workbook, the macro will not work correctly.
View 9 Replies View RelatedI'm trying to automate creating certain keyword combinations I need, based off of the values I input into reference cells in columns A - E; the goal is to compile a list of keywords which I will then use to track my rankings in search engines.
I'm looking to only output 500 keywords, so some of the cells in columns A, B, C & E will not contain data (column D will always have a primary Geo-target listed). This results in some of the concatenate formulas I've created outputting partial data (i.e. if there is no data in cell A10, and cell D2 contains the word "Knoxville", then cell I10 will output the data, "Knoxville "). How can I setup conditioning formatting or a formula so that these auto-generated cells appear blank if one of the reference cells has no data within it?The reason why I need the above to work is because I want to setup a formula that automatically counts the # of keyword combinations created by the data entered into any of the reference cells. With the partial combinations being listed, it skews my data. Which leads me to my next question: what is the best formula for counting the # of cells containing a full keyword combination from any of the cells listed in columns G - O (minus the data in the header cells; i.e. G1, H1, etc...)?Lastly, is there a formula I could use that would then aggregate all of the full keyword combinations within the "Complete Keyword List" column (column P)?
I am running Excel 2007 on Windows Vista Business 32 bit. Recently I have noticed that if I enter a formula into an empty, unsused cell, it is recognized as a formula. If I modify that formula, it is then recognized as text and does not work as a formula. The only way I can get the cell to recognize a formula is to delete the cell and start over. This same scenario does not occur on previously stored workbooks. I have checked all of the flags that I know about, including the Options function.
View 3 Replies View RelatedI have a macro running this code to strip out unwanted formulas and formatting.
Sub Quote_Wrapup()
'To stop screen flicker
Application.ScreenUpdating = False
Range("CDandC").ClearContents
Range("qdata5,qdata6").Font.ColorIndex = 2
'To delete delivery address lines if 1st line empty
If IsEmpty(Range("deliver_line1")) _
Then Sheets(1).Range("deliver_rows").EntireRow.Delete
'No End If required as only one action as a result of the If
Range("Item_Nos").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
Columns("A:E") = Columns("A:E").Value .........................
A spreadsheet based on my template has been sent to me because the macro won't run properly. When I try to run the macro I get a Runtime Error '1004' Method 'Range' of object '_Global' failed on the following line. Columns("A:E") = Columns("A:E").Value.
Is it possible to hide formulas from the formula bar while still having the formulas active?
View 8 Replies View RelatedI have a spreadhseet with various functions on it and what I am trying to do is this.
Cell E4 returns a >35 or <35 true or false value
Cell G4 is either blank or has "Yes" text type into it.
What I am trying to do is get cell F4 to return certain arguments.
E4 = >35 and G4 is blank I want it to state "Email Hiring Manager"
E4 = ,35 and G4 is blank I want it to state "Wait"
I have a basic IF formula that returns this
=IF(E4>35,"Email Hiring Manager","Wait")
Then if cell G4 is populated with a Yes the formula needs to overwirte the origonal if with the return arguments of
=IF(G4="Yes","Email Agency","Email Hiring Manager")
If yes then what would be Email Hiring Manager (yes will only be input if E4 is greater than 35) will be overwritten with "Email Agency"
Can this be done with two If formulas or does there need to be 3 or more to count if other IF formulas are actually returning a value?
If you have a cell with the value ="2*c2+3" NB: (Notice the ""), then to make excel convert the formula in another cell to =2*c2+3 (notice the removal of ""), so that it can calculate the value of the cell instead of showing a textstring?
I have formulas in a column and they are working unless I edit them to include another function, more cells, whatever, then they display as formulas instead of the result. I've gone to Tools --> Options --> View and the Formulas box is not checked. As well automatic calculation is on not manual.
View 4 Replies View RelatedI have 12 workbooks (one for each month), they have a list of assets to our company and a running total of all expenses for the month that they incurred. The 13th workbook is a yearly analysis of each asset. I need to transfer all charges into this worksheet.
So for example:
Worksheet 1 (January)
Column A Column H
Asset # Total Expense
5021 $3,041.52
970289 $242.08
Worksheet 13
Column A Column B Column C Column D
Asset # Asset Description January February
5021 Rivet Machine $3041.52 $345.65
So hundreds more machines for twelve months can take awhile to populate this info and very confusing when dealing with separate worksheets.
I need to get 5 small subs into 1 sub. (run the whole program by pressing once.
Please see attached file with codes : ServiceDriftMaaling.rar
I need to write IF statement with 4 criteria, or at least I think IF will do the trick. It would be difficult and not very visual to describe my question here, therefore I have attached a dummy workbook with the comments. Basically I have got 2 values in 2 columns. Next 2 columns will hold letter "x". There are 4 possible variations how "x" will appear in those two columns: first, second, both or none. So depending where the "x" is, I need to return one of the 2 values.
View 6 Replies View RelatedIn cell B1 I have the number 1
In cell C1 I have the number 1031000
I know how to combine the cells in A1. I am getting a result of 1-1031000
What I would like to happen is that 1 becomes 001.
Ending result is 001-1031000
problem is that cells in B could be one, two or three digits.
On a small scale I could fix manually but i have over 15,000 rows to deal with
I want to combine number in one row.
Column A
12
13
14
15
Need to be in column B. 12,13,14,15. I tried “=A1&”,”&??
Trying to write an IF query looking for multiple returns that would equal the same result.
I have a series of number where the last digit would result in the same return if the digit were 1 or 6, 2 or 7, 3 or 8, etc.
1 or 6 = 1
2 or 7 = 2
I have been trying unsuccessfully to combine the IF and OR queries
I am trying to use SUMIF as part of an IF statement, What I am trying to do is, for example, if a column has two values M and P, then SUMIF only those rows that have a corresponding M, and not calculate the P's.
View 9 Replies View Related