Combine Two Formulas With Average And Sum

Feb 20, 2008

Working on the same simple chart NBVC helped me on, but this is for AVERAGE instead of SUM and with an added variable.

View 14 Replies


ADVERTISEMENT

How To Combine Three Formulas

Mar 29, 2014

Ok, These are the three formula's. How do I combine them or can I.

=IF((B2="GOV"),[@[Gal Billed]]/1000*1.5)

=IF((B2="NPROFIT"),[@[Gal Billed]]/1000*2,0)

=IF((B2="COM"),[@[Gal Billed]]/1000*3)

View 4 Replies View Related

Two Formulas Need To Combine As One

Nov 9, 2007

I have two formulas that i need to combine as one, but i dont now how.

This is the other formula:

=SUMPRODUCT((Huollot!I2:I500="Ty”n alla")*(Huollot!K2:K500="Warranty")*1)

The other one:

=IF(NETWORKDAYS(Sheet1!C1;Huollot!C2:C500)>20;1;0)

the biggest problem is that this formula does not work as it is. Or is there some other function than networkdays that i could use?

The purpose of the formula is to count how many "objects" that are in service have been there for over 20 days. There a a few other criteria also, but sumproduct takes care of that. Can networkdays even be used the way i´m trying to?

View 14 Replies View Related

Combine 2 Formulas - Approved Value

May 9, 2014

I would like to combine the 2 formulas below but I don't know how to do this.

FORMULA 1

=J015_100!S6

FORMULA 2

=IF(ISNUMBER(SEARCH("Y",J015_100!U6)),"APPROVED","")

I would like to display the value of formula 1, unless the value of formula 2 is "Y" in which case the value would be "APPROVED".

View 2 Replies View Related

Combine 2 Formulas In One Cell?

Feb 3, 2014

I would like to have cell A3 contain two different formulas. I may be doing this wrong, so here is what I would like to do:

Cell A1 will contain a number that will change from month to month, but will need to show as $0 until then. Cell A2 will contain a fixed sum number from month to month Cell A3 will contain the difference between cell A1 and A2

I wouldl like cell A3 show as $0 until a number is inputted into cell A1

A1
$0

A2
$2000

A3
$0

The formula I have in cell A3 is =SUM(A2-A1), but cell A3 shows $2000. I remember doing this before, cut can't remember the exact formula. Something like =if(A1

View 4 Replies View Related

Combine Multiple If Formulas

Nov 14, 2006

i have 2 worksheet function IF statements that of course look for certain conditions, but in some instances i need to combine the IF statements in one cell, the 2 i need to combine are below:

=If(D3="S","Sick",If(D3="SW","Swapped",Sheet2!B3))

=If(Or(C1="Line On",G1="Line On"),Sheet2!B3,"")


so what i need is for the cell to show either Sick, Swapped or the contents of Sheet2!B3 however if both C1 and G1 show Line Off then cell must be blank, which is what i achieve with the second if statement.

View 3 Replies View Related

How To Combine If Formulas With Visual Basics

Aug 12, 2014

I have an excel sheet that have a large set of datas. In these datas in one column most of the datas are indicated as green but some of them are red. I can pick the red ones by using filter option but I also wanted to show the red cell values in one cell. For example, Cell1;Cell2;Cell3 like this (the ; should be between them). I try to use macros but that is not the program that I have full knowledge about it. S

( Like this
IF
A(i)= red
Then
B(i)=A(i)
end if
)

View 3 Replies View Related

Combine Two Formulas And Add A Condition If True

Jul 23, 2007

I have two formulas that I have worked out to deliver the results independently. I would like to join them together into one formula and add an If condition that if the two match then add a "+" to the end of the string.

#1 finds the base value :
=IF(ISERR(FIND("/",I2)),I2,LEFT(I2,FIND("/",I2,FIND("/",I2)-1)-1))

#2 verifies the value is a valid color:
=INDEX(M1:M41,MATCH(J2,M1:M41,0),1)

I would like to join the two formulas together and if they match then add a space, " " and a "+" to the end of the string. If there is no match then return the base value.

View 9 Replies View Related

Combine Worksheets....just Values No Formulas

Aug 3, 2009

i have about 100 worksheets in my workbook ..i need to combine them into one worksheet ...all my 100 worksheet has many formulas in some of the cells.

i want to combine all the worksheets one below the other with a gap of 5 blank rows after each worksheet contents....i just want the values in each worksheet to be pasted and no formulas...

View 9 Replies View Related

Nested IF - Is VBA The Answer: Combine The Formulas Into One?

Jun 12, 2006

I need to combine the following formulas into one but obviously it won't work due to the limitations. Would the following be better using VBA? If yes. At the moment, they are in 3 separate columns and working but indepenantly. It basically says, if the agreement is older than todays date, write expired, if not if its for 12 months, then calculate the percantage according to number of days. and so on for 24 months and 36 months...................

View 2 Replies View Related

Excel 2010 :: How To Combine Two Different Formulas Into One Cell

Jun 24, 2014

I need to know if it is possible to combine these 2 formulas (1. (RIGHT(C23,0)&RIGHT(C23,4)) and 2. LEFT(E23,2)&":"&RIGHT(E23,2)
into a single cell. I have a date time group that is in text format. I need to take the last 4 digits (the time) and pull it out into another. Then take that cell and convert it into an actual time ie 2:30.

example: 01may2014 0831 first formula pulls the 0831 into another cell. then the 2nd formula converts it into a time 8:31.

After this occurs, I can then subtract times from different categories in my spreadsheet.

My, problem, is that I cannot combine the two formulas. They work great by themselves. I am just trying to make formulas more compact and hopefully more efficient.

View 5 Replies View Related

Formula To Combine Multiple Formulas Into Single Cell?

Mar 12, 2014

I'm looking for a way for Excel to combine formulas together into a more compact form for me.

Attached is a very simple version of what I want, my actual formulas are very complex but I'd still like a way to have them automatically combined into a single cell.

Alternatively, what is a good way to break down a very complicated one-cell formula and still keep things organized?

Here is the one-cell version of a formula I work with.

[Code] .......

That formula is difficult to work with in one cell, so on another sheet I have it broken down into parts so that if one part isn't doing what I want I can change it. This takes up a LOT of space because of the other steps I do (the above formula is just one step) and I'd like to combine it together.

Attached File : Excel Formula Combination Question.xlsx‎

View 7 Replies View Related

Will Array Formulas Work In =AVERAGE()

Dec 28, 2007

This formula is returning 0.2578 when it should return 2.473

{=AVERAGE(('Data-Design'!E2:E6000)*('Data-Design'!Q2:Q6000=1))}

What am I not understanding?

I want the average of column E when column Q=1

View 9 Replies View Related

How To Average Large Formulas Ignoring 0 And Blank

Jun 20, 2014

So in Cell K12 there is a rather large formula (I condensed it for this example).

This formula is to average out the respective cells in column J. For each cell there is a possibility of 9 different entries. NRT, N/O, 1,2,3,4,5,6,7

So based on the formula in K12 I need Cell J12 to Display the answer.

if any one of the Cells referenced in the formula are NRT then I need it to Display NRT. Which the Formula does now.

The problem comes in when a Cell is N/O (Not Observed)

How do I get the formula to Ignore N/O currently I have it set up to recognize N/O as 0. But excel averages 0 in and it affects the answer.

I know in a simple formula I can add <>0 to the formula to ignore zeros. How to write it into a bigger formula such as in K12.

For example the current numbers in Cells J17:J25 should average 5 however the formula averages it as 1 because it calculates N/O as 0.

View 14 Replies View Related

Add AVERAGE Formulas To Cells Using Variables In Macro Code

Apr 15, 2008

I am trying to have the formula =( SUMIF(S2:S125,">0",S2:S125))/(COUNTIF(S2:S125,">0")) Put into cells through vba. What I did to get the formula is typed it into an excel cell to find the average of a group of cells that do contain blank cells. The formula brought out the proper results. So all I did is put the formula into vba and changed the appropriate parts. The range will not be the same of course, but there is what I have.

ActiveCell.Formula = "=(SUMIF(" & ActiveCell.Offset(orow + 2, 0).Address & ":" & ActiveCell.Offset(-1, 0).Address & ","">0""" & "," & ActiveCell.Offset(orow + 2, 0).Address & ":" & ActiveCell.Offset(-1, 0).Address & "))/(COUNTIF(" & ActiveCell.Offset(orow + 2, 0).Address & ":" & ActiveCell.Offset(-1, 0).Address & ","">0""" & "))"

When I show a msgbox for ActiveCell.Formula (Msgbox activecell.formula), it shows me the formula as above - =(SUMIF(S2:S125,">0",S2:S125))/(COUNTIF(S2:S125,">0")) Except instead of the s:ranges, it shows $L2:$L125 (which is correct). The quotes do show up around the criteria in both the sumif and countif. I keep receiving an error. I put a msgbox err.description & ", " err.number dialog in. The error comes up as ", 0" (no quotes).

View 2 Replies View Related

How To Combine Text Values Of Formulas In Addition To Adding Text

Jun 15, 2013

I am trying to combine the text values of several formulas in addition to adding some text (punctuation) in between.

Here is the data that I am trying to combine

C14: 2013
C15: Period 6
C16: Week 1

In Cell C13, I would like to have this value returned: "2013 - Period 6, Week 1"

Is there such a way to do this?

View 9 Replies View Related

Can 2 "if" Formulas Combine As One?

Apr 21, 2009

I am creating a Sales Pipeline. I have learned everything I know about excel on my own...lol. So probably not so much. My problem is I need a formula that can total a range of cells only "if" they meet "2" different criteria. Is this possible. I am attaching my workbook. I have formulas in there but Im not getting totals. I dont know where Im messing up. (all info in work book is fiction)

View 4 Replies View Related

Average Column Of Cells But Ignore Errors And Return Average Of Numbers That Are There

Jun 14, 2013

E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).

E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.

I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.

View 14 Replies View Related

Using Cell References In File Paths For Formulas To Create Dynamic Formulas

Dec 3, 2013

I am using a lot of linked reports that have to be rewritten each month. For example smaller formulas look like this:

=('S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$228*2)+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$262+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$292

What I want to do is extract the file path from the above formula and make it a composite of several cell references.

So what I need is to have a cell where they can change the month and another where we can change the year. So I set up several named cells that look like this:

_MONTH =11 November
_YEAR =2013
_JOBCARD ='S:PUBLICProductionJob CardsMOLDING
_PATH =_JOBCARD & _YEAR &"" &_MONTH

I tried several versions, I am hoping for something like this:

=('_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$228*2)+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$262+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$292

View 4 Replies View Related

Converting Formulas To Relative/absolute References With Formulas Referencing Other Sheets

Dec 15, 2008

I've found a few macros that will automate changing cell references from absolute to relative and they work great. However, when I run the macros on formulas that have references to another worksheet or workbook, the macro will not work correctly.

View 9 Replies View Related

Formulas To Hide Partial Concatenate Data And Determining Two Other Formulas

Dec 11, 2013

I'm trying to automate creating certain keyword combinations I need, based off of the values I input into reference cells in columns A - E; the goal is to compile a list of keywords which I will then use to track my rankings in search engines.

I'm looking to only output 500 keywords, so some of the cells in columns A, B, C & E will not contain data (column D will always have a primary Geo-target listed). This results in some of the concatenate formulas I've created outputting partial data (i.e. if there is no data in cell A10, and cell D2 contains the word "Knoxville", then cell I10 will output the data, "Knoxville "). How can I setup conditioning formatting or a formula so that these auto-generated cells appear blank if one of the reference cells has no data within it?The reason why I need the above to work is because I want to setup a formula that automatically counts the # of keyword combinations created by the data entered into any of the reference cells. With the partial combinations being listed, it skews my data. Which leads me to my next question: what is the best formula for counting the # of cells containing a full keyword combination from any of the cells listed in columns G - O (minus the data in the header cells; i.e. G1, H1, etc...)?Lastly, is there a formula I could use that would then aggregate all of the full keyword combinations within the "Complete Keyword List" column (column P)?

View 11 Replies View Related

Excel 2007 :: Formulas In Cells Not Being Recognized As Formulas?

Jan 10, 2013

I am running Excel 2007 on Windows Vista Business 32 bit. Recently I have noticed that if I enter a formula into an empty, unsused cell, it is recognized as a formula. If I modify that formula, it is then recognized as text and does not work as a formula. The only way I can get the cell to recognize a formula is to delete the cell and start over. This same scenario does not occur on previously stored workbooks. I have checked all of the flags that I know about, including the Options function.

View 3 Replies View Related

Paste Formulas As Values (strip Out Unwanted Formulas)

May 13, 2008

I have a macro running this code to strip out unwanted formulas and formatting.

Sub Quote_Wrapup()
'To stop screen flicker
Application.ScreenUpdating = False

Range("CDandC").ClearContents
Range("qdata5,qdata6").Font.ColorIndex = 2

'To delete delivery address lines if 1st line empty
If IsEmpty(Range("deliver_line1")) _
Then Sheets(1).Range("deliver_rows").EntireRow.Delete
'No End If required as only one action as a result of the If

Range("Item_Nos").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
Columns("A:E") = Columns("A:E").Value .........................

A spreadsheet based on my template has been sent to me because the macro won't run properly. When I try to run the macro I get a Runtime Error '1004' Method 'Range' of object '_Global' failed on the following line. Columns("A:E") = Columns("A:E").Value.

View 4 Replies View Related

Average And Vlookup: Average The Grades With Appropriate Names

Dec 9, 2008

i have two columns...a and b (a w/ names, and b w/grades). then i have the table lookup with names and grades all mixed up for many rows. i want to be able to average the grades with appropriate names.

=average(vlookup(name, table, column, false))?? i don't get it to work and how can i specify the grade to average?

View 5 Replies View Related

Hide Formulas From Formula Bar While Still Having Formulas Active?

Jan 16, 2014

Is it possible to hide formulas from the formula bar while still having the formulas active?

View 8 Replies View Related

Worksheet.function Average Returning Error "Unable To Get The Average Property Of The WorksheetFunction Class"

Jan 23, 2007

TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv)
If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)

The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.

View 3 Replies View Related

How To Get A Minimum Average And A Maximum Average

May 23, 2014

Can I get a minimum average and a maximum average, I have a worksheet with days of supply for 100 stores with about 100-200 products each, the dos resides in column D.

I was going to create a summary page and reference column d.

The following just gives me the min, I want the min average if possible:

View 5 Replies View Related

Grade Point Average Using AVERAGE IF AND

Sep 1, 2006

I am attempting to calculate Grade point averages for my students for all classes. There are 5 columns of grades to be considered. I frist assign values of 0-5 to the grades then average the points. My problem is that I want the AVERAGE to ignore the zero but it calculates it as well. (I enter a 0 if I have no grade for that class.) I have tried the{ } to make it an array formula but this also did not work. Here is what I have, can anyone help?

=SUM(AVERAGE(IF(AND(L2>89,L2<100),5,IF(AND(L2<90,L2>79),4,IF(AND(L2>69,L2<80),3,IF(AND(L2<70,L2>59), 2,IF(AND(L2>0,L2<60),1,0))))),IF(AND(T2>89,T2<100),5,IF(AND(T2<90,T2>79),4,IF(AND(T2>69,T2<80),3,IF( AND(T2<70,T2>59),2,IF(AND(T2>0,T2<60),1,0))))),IF(AND(AB2>89,AB2<100),5,IF(AND(AB2<90,AB2>79),4,IF(A ND(AB2>69,AB2<80),3,IF(AND(AB2<70,AB2>59),2,IF(AND(AB2>0,AB2<60),1,0))))),IF(AND(AJ2>89,AJ2<100),5,I F(AND(AJ2<90,AJ2>79),4,IF(AND(AJ2>69,AJ2<80),3,IF(AND(AJ2<70,AJ2>59),2,IF(AND(AJ2>0,AJ2<60),1,0))))) ,IF(AND(AR2>89,AR2<100),5,IF(AND(AR2<90,AR2>79),4,IF(AND(AR2>69,AR2<80),3,IF(AND(AR2<70,AR2>59),2,IF (AND(AR2>0,AR2<60),1,0)))))),-1)

I know it is huge. The syntax is correct. It calculates the average, but always for all 5 columns. It will not ignore a 0 in a column.

View 10 Replies View Related

Formula =AVERAGE(B16:L16) To Give The Average

Jan 7, 2008

I'm using the formula =AVERAGE(B16:L16) to give me the average.

However I have a couple of problems with this. Firstly I would like to exclude the value zero from the average. Secondly to also ignore the lowest and highest values.

Example, if the values in the cells are 0,1,2,3,4,5,6,7,8,9,10 then the current result shows 5, by ignoring the 0 and lowest value 1 and highest value 10 the average should be 4.5.

View 9 Replies View Related

Avoiding Average Of An Average: Times

Oct 11, 2006

Ok, I for some reason just cant wrap my head around this. I need to to get the average time per call of two rows, but they are based on how many calls taken.

so in one column i have 50168 calls taken at 4:21 seconds per call. and in the next row i have 597 calls taken at 5:20 per call. I need to see what the new average will be with them combined, and I need it to display in m:ss form.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved